Agent issue with 10.2.0.4 on RHEL 4 for single instance db.
Hi,
I had 2 instances that were not able to upload nor where they secure. For one of them which ran on port 5500, I was able to go through the forums and basically I ended up dropping the repository for that instance, and then I was able to secure the agent, and uploads were fine. Now I have one single instance that runs on port 1158:
[oracle@stdb7 bin]$ emctl status agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.6.0
OMS Version : 10.1.0.6.0
Protocol Version : 10.1.0.2.0
Agent Home : /dsk0/oracle/stdb7XXXXorg_dhqprd
Agent binaries : /dsk0/oracle
Agent Process ID : 27304
Parent Process ID : 27301
Agent URL : http://stdb7XXXXorg:3938/emd/main
Started at : 2009-05-12 10:53:16
Started by user : oracle
Last Reload : 2009-05-12 10:53:16
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 56
Size of XML files pending upload(MB) : 2.44
Available disk space on upload filesystem : 70.15%
Agent is Running and Ready
[oracle@stdb7 bin]$ emctl secure agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Agent successfully stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
[oracle@stdb7 bin]$ emctl start agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ... started.
[oracle@stdb7 bin]$ emctl clearstate agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
clearstate failed with ret=-10
[oracle@stdb7 bin]$ emctl clearstate agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
[oracle@stdb7 bin]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stdb7XXXXorg:1158/em/console/aboutApplication
Agent Version : 10.1.0.6.0
OMS Version [oracle@stdb7 bin]$ emctl status agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.6.0
OMS Version : 10.1.0.6.0
Protocol Version : 10.1.0.2.0
Agent Home : /dsk0/oracle/stdb7XXXXorg_dhqprd
Agent binaries : /dsk0/oracle
Agent Process ID : 27304
Parent Process ID : 27301
Agent URL : http://stdb7XXXXorg:3938/emd/main
Started at : 2009-05-12 10:53:16
Started by user : oracle
Last Reload : 2009-05-12 10:53:16
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 56
Size of XML files pending upload(MB) : 2.44
Available disk space on upload filesystem : 70.15%
Agent is Running and Ready
[oracle@stdb7 bin]$ emctl secure agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Agent successfully stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
[oracle@stdb7 bin]$ emctl start agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ... started.
[oracle@stdb7 bin]$ emctl clearstate agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
clearstate failed with ret=-10
[oracle@stdb7 bin]$ emctl clearstate agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
[oracle@stdb7 bin]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stdb7XXXXorg:1158/em/console/aboutApplication
Agent Version : 10.1.0.6.0
OMS Version : 10.1.0.6.0
Protocol Version : 10.1.0.2.0
Agent Home : /dsk0/oracle/stdb7XXXXorg_dhqprd
Agent binaries : /dsk0/oracle
Agent Process ID : 25197
Parent Process ID : 25194
Agent URL : http://stdb7XXXXorg:3938/emd/main
Started at : 2009-05-12 11:25:33
Started by user : oracle
Last Reload : 2009-05-12 11:25:33
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 66
Size of XML files pending upload(MB) : 4.18
Available disk space on upload filesystem : 70.14%
Agent is already started. Will restart the agent
Stopping agent ... stopped.
Starting Oracle Enterprise Manager 10g Database Control .... started.
Logs are generated in directory /dsk0/oracle/stdb7XXXXorg_dhqprd/sysman/log
[oracle@stdb7 bin]$ emctl upload
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
[oracle@stdb7 bin]$ emctl unsecure agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking Agent for HTTP... Done.
Agent is already unsecured.
[oracle@stdb7 bin]$ emctl clearstate agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
[oracle@stdb7 bin]$ emctl secure agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
[oracle@stdb7 bin]$ emctl start agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ... started.
[oracle@stdb7 bin]$ emctl upload
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet.. : 10.1.0.6.0
Protocol Version : 10.1.0.2.0
Agent Home : /dsk0/oracle/stdb7XXXXorg_dhqprd
Agent binaries : /dsk0/oracle
Agent Process ID : 25197
Parent Process ID : 25194
Agent URL : http://stdb7XXXXorg:3938/emd/main
Started at : 2009-05-12 11:25:33
Started by user : oracle
Last Reload : 2009-05-12 11:25:33
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 66
Size of XML files pending upload(MB) : 4.18
Available disk space on upload filesystem : 70.14%
Agent is already started. Will restart the agent
Stopping agent ... stopped.
Starting Oracle Enterprise Manager 10g Database Control .... started.
Logs are generated in directory /dsk0/oracle/stdb7XXXXorg_dhqprd/sysman/log
[oracle@stdb7 bin]$ emctl upload
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
[oracle@stdb7 bin]$ emctl unsecure agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking Agent for HTTP... Done.
Agent is already unsecured.
[oracle@stdb7 bin]$ emctl clearstate agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
[oracle@stdb7 bin]$ emctl secure agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
[oracle@stdb7 bin]$ emctl start agent
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ... started.
[oracle@stdb7 bin]$ emctl upload
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
So, with this one instance and agent, I keep going in loops with the same 2 errors:
1. EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
2. The OMS is not set up for Enterprise Manager Security.
I even followed related messages on the forums here to try to resolve the issue, but this did not work:
'- emctl stop agent
- delete all files in $AGENT_HOME/sysman/emd/upload and $AGENT_HOME/sysman/emd/state
- emctl clearstate agent (this should delete all state files but sometimes it is not enough, but I experienced that it is better to use this command after deletion of the files)
- emctl secure agent (and specify the password on demand)
- emctl start agent'
Any advice or help on HOW to secure this instance's agent and get it to upload would be greatly appreciated.
Edited by: user611572 on May 12, 2009 9:11 AM
I guess I solved my own issue, however I basically had to drop and recreate the repository and grid control for the instance, thus loosing over 3300 XML files, but now the agent is working and the server is running secure. I simply did:
emca -config dbcontrol db -repos recreate
And answered all the questions... I am wondering if the 3300+ xml files I deleted by following some guy's response in a similar thread was necessary, and if it was not, I wonder if I would have been able to upload all of the files after executing and rebuilding....
Since you have dropped the repository thats why it was needed to deleted the previous files
Similar Messages
-
I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
-
Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7?? Installed ios7 this morning. Tried to use one of my photos from camera roll as background for lock screen and I can't scale the photo to fit the screen. Never had a problem before and now when I pinch the photo to get it to the right size of the screen, it won't stay that way. The photo is enlarged way beyond the screen size so it doesn't look right. Does anyone know how to fix this?
Hello, cliffiapp4.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H. -
Can't access an agent- issues with order and installation
I had my installation for a new service today and had issues with the order. I have been trying to talk to agent after 6 hrs and I still haven't reached anyone. My order is messed up and I have a phone number with the package, but I have no clue what my number is. I need help ASAP. I'm a new comcast customer and it's already going bad. I was with Direct tv for 7 years and had no issues with them. The installation process was seamless with DTV....Comcast...not so much.
Sorry to hear about your issues with Comcast. I let a Comcast employee from the corporate office know about your issues and have requested that they reach out to you. If you don't hear from anyone soon, let me know.
-
Ive had issues with my Apple TV. I got it about 10 months agao and all was well. About 3 weeks ago, it hung up trying to update date and time. Apple repalced it and all was well with the new unit. Sat I went to use it and again this new unit as well hung up looking to update DATE and Time. It wont get pasted here, so nothing else happens
Any thoughts?
GarryDepending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first
-
Issue with getting sequance number from db in EO for a primary key column
Hello Experts,
we are working on ADf 11.1.1.2.
we are facing issue with sequence number in our UAT instance.
dev instance and sit instances did not gave any issues.
We have one EO in that for one attribute we have given the value as
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
in order to get the primary key column value from db sequance .
<TransientExpression><![CDATA[(
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
]]></TransientExpression>
now the issue is "I have incremented the sequence number through SQL plus from 10 to 20. And created a record on a VO which is based on above EO.
But the sequence iam getting is 11 instead of 21."
This is happening only in our uat instance all other instances are working fine.
Can any one tell us how this frame work is still pointing tho the old sequnce number.
regards
GayazAlso make sure that your sequence has NOCYCLE option.
some thing like this:
CREATE SEQUENCE test_seq
START WITH 1
INCREMENT BY 1
NOCACHE
NOCYCLE; -
Me and my brother have been messing with Assistive Touch on and off since iOS 5 canme out. We been noticing that when we actually move to use the home button, sometimes it doesnt respond. Though I'm all for thinking my home button my be on the fritz, it wouldnt explain how mine and my brother suddenly have issues with our home buttons at the same time. Both of us had a time where the home button didnt respond at all. and its been intermittent ever since. Anybody that has an answer or another case like this I' d like some information
Reset Home button steps:
(1) Tap Settings App, when it is open:
(2) Hold Power button until "slide to power off" bar appears.
(3) Don't slide it, release power button.
(4) Gently, continuously press Home button for few seconds until home screen appears.
(5) Done.
If this does not help, further points to Hardware Problem. -
Issue With AMP 4.0 - forms service showing down on all Instances
Hi,
I've recently installed AMP4.0 on linux 5.3 EBiz 12.1.3.
My issue is that the forms service is showing as down for all instances. Has anybody come accross this issue before?
FEXDEV1-Oracle Forms FEXDEV1_ebizappsuat
Service is down; 3 key components are down: FEXUAT1-Oracle Forms FEXUAT1_ebizappsuat, FEXUAT1_ebizappsuat.ebizappsuat.fexco.ie_forms, FEXUAT1_ebizappsuat.ebizappsuat.fexco.ie_HTTP Server
Thanks,
KeithDid you ever get this resolved
-
I'm developing an application using WebRTC and Data channels. I have no problem connecting data channels in chrome browsers across separate networks but, unable to connect data channels in Firefox browsers across separate networks. I always get iceConnectionState failed. I'm parsing the ICE candidate information from the SDP's 'a=' record after issuing a peerConn.createOffer. I then send this ICE candidate data across the signaling channel. Upon receiving the ICE candidate information on the receiving end I perform peerConn.addIceCandidate(candidate). However, nothing I have tried for the past several days is allowing the two Firefox browsers to connect the datachannels via WebRTC. I am however able to make the same code work across two Firefox browsers if they are both on the same network.
hello kbrooking, this here is i primarily user-driven support forum, so i'm not sure if we could come up with a solution for this issue. if it's something reproducible, then i'd recommend filing a bug at bugzilla.mozilla.org - there it will get the attention of developers. thank you!
-
Issues with new Ipod, & questions Ive searched the forum for with no luck!
Hi everyone!
Just got a brand new Ipod Touch 8G, used to have a used 16G but it finally broke. So since I bought this one brand new I actually decided to register it with Itunes under my email, unlike the last one which someone gave me and I could never get to let me sign in. I also JUST changed banks, and dont have the CC yet 4 the new one so I tried using Paypal as my registration payment type for Itunes, even went into Paypal and added ALL my new bank routing numbers, AND put a little cash into Paypal. At first this seemed to work fine with Itunes, it let me finish signing up and even let me start downloading a few free things, THEN I went into my separate paypal account window to remove an OLD prepaid Netspend card in case anyone charged the old card (trust me prepaid cc are a scam!) it wouldnt take my money from the bank thru paypal. AS SOON as i removed the card, Itunes stopped downloading my free stuff, and told me I had to verify payment information, took me to the main Itunes screen, where i again chose Paypal, only this time it took me right into Paypal to where u go to add a credit card and it told me I NEEDED to add a credit or debit card to paypal! WHY? It had worked fine, I have money on the account and a BANK ACCOUNT attatched!
*So i decided to just work on copying my music from my computer to the Ipod since I couldnt get Itunes working. This is where I have a few questions, have searched here cant really find the info so here goes...
first of all since I'm sure someone will ask what VERSION I have, WHERE the heck do you find this info? Cause all I know is its a brand new 8G Touch, it says nothing on the box about a version, when I access my General Settings on the Ipod, and go to About it says Version 4.0. So i guess thats my version even tho people on here have said there is nothing that high for the 8G?
**Second, i have been trying to find a better way to organize my music. I KNOW i can simply go to Music, Artist, pick the band then hit shuffle, BUT I am a big fan of playlists, I like my music to play in a certain way usually. But I have some artists that I have HOURS of music for, Im not sure i understand how I can change exactly what songs play by this artist, in a certain order for that time? I'm guessing I need to use my actual Itunes computer screen to do this? Right now I just have all my songs by an artist under a playlist with their name.. However, I am more than willing to sacrifice some of my longer playlists with just one artist in them if ANYONE thinks that it would help free up ANY more space? I have seen quotes from Apple and such that say the 8G should be able to hold around 1700 songs, of course i know this is a rough estimate, as some songs are longer, but I havent put THAT much on it, under my General/About tab it says 360 songs, and I removed ALL my pics from it cause i have a lot, and STILL I have already supposedly filled up 3.73GB, and this bring me to my next big issue-
**WHY does it claim to be 8G but my capacity now says its just 6.83!? I mean I havent added anything but music yet, and I planned on getting some of the free apps n such, but at this rate I wont have the space! I know 6.83 isnt far from 8, but still I feel cheated...does it have anything to do with the UPDATED version of the software that Apple convinced me to update RIGHT after I had JUST installed the Ipod? Cause it took forever then it said it was RESTORING my Ipod, and it told me on Itunes that it was restoring my music from backup! Why would it have erased all content during a basic upgrade without even telling me? Is there any way to uninstall that update and get back the memory it took up? And do these backup files take up space like on a normal computer? what about under settings where it says something about condense? I just think I must be doing something wrong cause 8G and 16G arent THAT vastly different,but the old touch I had had a WHOLE BUNCH more music on it PLUS 1000s of pics, PLUS some Apps, and wasnt nearly full, this one I added my fav artists and its nearly full?
Well, thanks a bunch for anyone who stuck with me there...I'm not tech stupid I promise lol, I'm a 26 yr old college student and have even worked tech support before, but i admit I'm not at all familiar with the Apple software, system or much beyond the basics...I just spent nearly 200 on this thing, and it IS a great toy, I just want to be able to fully use it!
Oh also, ive heard two things, that you DONT need a "sensor" seperate thing for the Nike app with the Touch, and that yes you DO...any idea? If i DO need to BUY something else I do not want it and can I remove it to free up space??
thanks a bunch eagerly awaiting any answers...might have to call Apple today about the Itunes payment registration thing...Welcome to the discussions,
WHY does it claim to be 8G but my capacity now says its just 6.83
The size of you HD is calculated binary when it comes to use it, instead of decimal when companies want to advertise there products. 1 KB=1024Byte instead of 1000KB as advertised by the manufacturer. In your case this reduces the actual available space by the factor of 0.93 or approx. 7,4GB.
If you have an "other" section in your color bar showing the different types of data on your ipod, which is bigger than 500MB, this could be a sign of corrupt data caused by a sync that did not complete or copied damaged data. A restore will reduce the size to normal again.
Restoring: http://support.apple.com/kb/HT1414
If you restore your ipod, iTunes will install the newest firmware first and then add back your data and settings from your last backup if you choose to "restore from backup". Every backup is replaced by the following one, so make sure to include this folder in your backup routine in case you'll have to go back.
You can check the location and size of the backup folder for your ipod here:
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
copied from: About backups http://support.apple.com/kb/HT1766
Sorry, I can't answer your payment question, I have never used your kind of setup, maybe you can find something useful here: http://www.apple.com/support/itunes/ -
Issue with fixed point number output from 9219 module for full bridge measurement (cRIO/FPGA)
Hi,
I have a question regarding the fixed point output acquired from a 9219 module (in FPGA on a cRIO) when setup to acquire a strain measurement (full bridge).
Software: Labview 2009
Hardware: cRIO-9012 (NI-RIO 3.2.1), NI-9219 module
The 9219 module is configured in the project as follow:
Ch0: Full-Bridge +/- 7.8mV/V
Ch1: Voltage +/- 4V
Ch2: Voltage +/- 15V
Ch3: Voltage +/- 60V
The calibration mode is 'Calibrated' so the FPGA outputs fixed point numbers.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
Any help/clarification is much appreciated.
Regards,
MikeHello Mike,
Hopefully I can help clarify some of the behavior you are seeing.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
For calibrated values on the FPGA VI, the returned data is a Voltage measurement, not a directly calculated strain value. Based on the specified ranges for the 9219 in a Full bridge configuration, 250 mV will encompass all possible input values, at the module provided excitation (2-2.7V dependent on the sensor gage resistance).
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As you may notice from the fix-point definition, the fixed point data contains 32-bit precision which is larger than the acquired precision of 24-bits provided by the 9219. The fixed point data-type is coded to accept input encompassing both the range and precision of the instrument; such that, no additional coercion of the input data values is required based on user-defined software settings, i.e. the bridge sensitivities +/- 7.8mV/V or +/-64mV/V.
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
The documentation does not clearly define that by varying the discrete levels of strain input (+/- 7.8mV/V or +/-64mV/V) the range of the ADC on the module is also adjusted. I am working to follow up further on this topic, to provide a clarification on the module documentation. As for scaling, the voltage values acquired regardless of the ADC resolution will still be related strain via the bridge sensitivity. The resolution of the ADC will simply define the smallest measurable change in the strain value.
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
For converting the acquired voltage values to a strain measurement, I would recommend the documentation linked here for a detailed explanation on strain calculation. Often, users will forward the acquired voltage data as fixed point values through a DMA FIFO to the RT controller on the Compact RIO; such that, they may handle conversion from voltage to strain using floating point math in real-time.
I hopes these responses provided a bit of clarity. I will continue to work to provide additional information on the 9219 specification information. Please post back any further questions.
Cheers!
Edit: Forgot to add the link.
Message Edited by Pcorcs on 04-14-2010 04:55 PM
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments -
Any known issues with SCOM 2007 R2 after upgrading to SP2 for SQL 2008 R2 ?
Are there any known or reported issues in SCOM 2007 R2 after installing SP2 for SQL server 2008 R2 ? Currently running RTM version of SQL Server 2008 R2.
Hi There,
As a testing purpose long time back i did this. I did this step by step
I installed SCOM 2007R2 with SQL server 2008 with SP1 initially.
Then upgraded to 2008 SP2.
Then upgraded to 2008 SP3
Then upgraded to 2008 R2.
Then upgraded to 2008 R2 SP1
Finally to SP2
I dint find any issue.
I just kept on adding service packs upon each other. Except for upgradation to 2008 to 2008 r2 i used the installation media then the SP1 & SP2 files. to upgrade to service packs.
If you want to go to directly SP2 i would suggest you install SP1 and then install SP2.
Every thing is fine in the LAB equipment i tried this.
Gautam.75801 -
Hi Team,
Unfortunatly, I plugged-in one of my friends external hard drive, and its asked me for the seagate driver instalation, after that every time when I am turning on my system, its asking for the goFlex software instalation process.
I tried out some process by googleing, I tried to remove the complete segate from my system, still it didn't help me.
Please help me with, to remove a complete segate package.
Thanks,
Jayaram.Thanks Richard.
The 3 point did help me, now its not all asking for the each time instalation for the same driver.
Here one question comes to my mind, by deleting the content of the temp folder for the segate and removing all the releated files from the application, library->application support, library->extension, library->LaunchAgents, I deleted all the releated files of segate, could you please let me know if I need to delete from any more location to avoid the garbage files.
Thanks for your time and help -
Has anyone had issues with their galaxy s4s using alot of data for no reason at all?
I had my data on both phones and internet peice at home turned off and got 3 overages within 15 mins of each other . I calle verizon to help with the situation... but no help. They said that we were using the data? I work in a wireless center so i know how to turn it off and I KNOW it was off. Its ridiclous that my husbands new s4 has used 23 gb of data when he isn't using it that much. Im stuck now paying a 444 bill because this phone is wacko. Ive been with them over 3 years. He just upgraded. Why wont they try to do something to help... all they say is ma'am you are using that much data. Um no we aren't. STUPID. Im beginning to HATE!!! verizon. Im out of contract. Thinking about closing my account and going with someone cheaper, because I cannot afford a 444 bill every month because they won't help fix the situation.
fallenangelgirl99, we don't want you to go and we're here to help in any way that we can. You have the option of changing your plan during the bill cycle to avoid data overage charges. Did you receive usage alerts via text message? http://vz.to/1hvu4tP Let's make sure that you're on the best plan to fit your usage: http://vz.to/1qhEcv5
LasinaH_VZW
Follow us on Twitter @VZWSupport
LasinaH_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
hi, I sent my information to you in order to go the extra mile for me to download the code system for free .. Mountain Lion Three days ago and so far I did not receive the code, What is wrong? .. I hope help me
-
Can I use my ipad2 like a laptop with word proseser . I want to do a cv
-
Update using select/option question
Morning, Does anyone have a snippet of code somewhere that I can use for an update select? I need it to take the values from a database table and show the one the user selected like : <SELECT NAME="DinnerChoice"> <OPTION SELECTED = 'Dinner1'>Dinner1
-
Hitachi vs. Segate vs. WD Scorpio
Hello, I'm about to upgrade my Unibody Macbook Pro (late 2008) with a brand new 500 GB HD - 7200 RPM. I have been searching for an answer but people are "always" a fan of something. Anyway, I'm considering these following Drives: 1- Seagate Momentus
-
Change configuration information in one vi
Is it possible to read and change the data in a configuration file using only one vi? The only way I could think of requires 3 vis. One to read the information, the second to accept the information as inputs, allow the user to edit the information an