Aggregate function for a report that has sets

My report combines similar analysis into sets. I need to apply aggregate function such as Max() to the resulting columns. I tried but Analytics doesn't like that. Can someone tell me if this is supported or not? If not, what would be a workaround?

Have you tried placing the results into a pivot table then assigning this to display MAX results

Similar Messages

Loking for a Doc that has the definition of the calculations that used in Historical reports.What makes up Average Queue time?

Looking for a Doc that has the definition of the calculations that are used in Historical reports.
What metrics are used in Average Queue time?
What metrics are used in Average Speed of answer?

If you're on UCCE, the Reporting Guide and the Database Schema are fantastic resources.
http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-enterprise/products-user-guide-list.html
http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-enterprise/products-technical-reference-list.html
-Jameson

Printing report that has a parameter with multiple values crashes jvm

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

Faxing a Crystal Report that has been exported to a PDF

Hi. I am having a problem trying to fax a Crystal Report that has been exported to a PDF. I am using Windows XP Pro SP3, VB.Net 2008 and the Crystal Reports that came with it. The report exports to a PDF with no problem. Generally, I can fax a document by putting <TOFAXNUM:12481234567><NOCOVER><DELETE><FINE> at the beginning of a document and send it to my fax printer. The fax printer requires the <embedded code> to be in a printer font rather than a true type font. I put the embedded code as a report header on the report using Courier font, but it has a problem when it converts my font. I'm pretty sure the problem has to do with converting my font before it sends it to the printer. Is there a solution in Crystal Reports to convert the font to printer font?

I am using Table Adapters to filter my data from multiple Sql tables and processing the data using VB.net 2008. Once I have the data, I write it to temporary tables which are the data source for my Crystal Report. The Sql queries are not part of the Crystal Report designer. Within the VB.net , I export the report to a stream in PDF format. The VB.net code is done. I'm looking for a way to fax the report without having to re write my entire code. I don't think the report can be exported thru the designer the way I have my data sources set up.

Need to print a report that has two pages but based on condition

Hi
Can someone help me. I have a report that has 2 pages and I need print it but not boths pages at the sametime.
I have code ( the conditions)like this
If (A=Y) then
print Page 2
else print page 1
end if;
Note: Where would I put the code. Please
Thank you

Some folks have written JavaScripts for such needs, but for only 6 pages I would simply do the following. 1. Crop all pages to show 1 and 4. Then print to a new PDF (not optimum, but will do the job). 2. Repeat for 2 and 5. 3. Repeat for 3 and 6. Now open one of them in Acrobat and the use insert pages to insert the other two files. Now rearrange the pages using the Pages display and save. That should do the job.

Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.

Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.
All of the apps I have found on the App store either do not have the text to speech capability or if they have it they will only read a page at a time or simply read the text you paste into their window. I really do not understand what is so difficult about having this feature as Kindle provides it--though Amazon does not make the feature available on its iPhone 4 app.
Please help.

thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

How do i create a report that has drill-down with class?

How do I create a report that has drill-down levels so that I can have summary information at the top level but then view specific records at a more detailed level?

can i know ur email address.
this is my other one coding
but problem is very very slow when i 1 see my output
TABLES: proj, coep.
*&            TYPES DECLARATION                                        *
*TYPES: BEGIN OF tb_coep,
         wtgbtr TYPE coep-wtgbtr,
      END OF tb_coep.
DATA : int_proj TYPE proj OCCURS 0 WITH HEADER LINE.
DATA : int_coep TYPE coep OCCURS 0 WITH HEADER LINE.
DATA : gd_date(10). " FIELD TO STORE OUTPUT DATE
TYPES : BEGIN OF t_date,
          year(4) TYPE n,
          month(2) TYPE n,
          day(2)   TYPE n,
       END OF t_date.
*&            SELECTION-SCREEN                                         *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-001.
SELECT-OPTIONS: so_pspnr FOR proj-pspnr OBLIGATORY.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN END OF BLOCK b01.
*&            TOP-OF-PAGE                                              *
*&            fetch the data for the list                              *
SELECT * INTO int_proj FROM proj where
         pspnr in so_pspnr.
append int_proj.
CLEAR int_proj.
ENDSELECT.
SELECT * into int_coep FROM coep WHERE
         wtgbtr in so_pspnr.
append int_coep.
CLEAR int_coep.
ENDSELECT.
LOOP at int_proj.
write : / int_proj-pspnr, int_proj-post1.
ENDLOOP.
LOOP at int_coep.
write : int_coep-wtgbtr.
ENDLOOP.
Edited by: Dickson on Jul 10, 2009 10:53 AM

We're sorry, but this is a serial number for a product that has been replaced

Today i bought one iphone 5 but when i check the serial number in self support not exist my serial no is DNPJGFSDDTTR message showing is
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.
Finding your serial number is easy. See how.
pls help us... to resolve the issue.

You are not speaking to Apple. This is a user forum.
If it's possible, return the phone and get your money back.
You bought a gray market phone that was reported lost or stolen or was already replaced by Apple and was re-sold illegally.
It has no warranty.

I refuse to pay for a one year automatic subscription for Cosumer report that was charged to my account today without me noticing. How can I cancel that and get reimbursed now?

I refuse to pay for a one year automatic subscription for Cosumer report that was charged to my account today without me noticing. How can I cancel that and get reimbursed now?
Patrick

First turn off auto-renewing subscriptions:
iTunes Store: Purchasing and managing auto-renewing subscriptions
Getting a refund won't be as simple. For that you will have to contact iTunes Store Support.

When entering my phone serial number it shows "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."

Hi,
I had purchased an iPhone 5 last month and got the OS updated to iOS 7, yesterday.
The data cable was of very bad quality and when I took it to the retailer for replacement, they said that its not covered under the one year warranty.
Secondly, I have also been experiencing network coverage issues with this phone. So, I decided to contact apple care through the web. When entering my serial number/IMEI it says, "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."
Does anybody have any idea what the reason behind this could be.
- First time with iPhone and frustrated.
Briju

If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from.

Aggregate functions for internal table.

Hi Gurus,
I'm just wondering whether we can use aggregate functions for internal table. I wanted to know the max value for a particular column in my internal table. How can I achieve this easily and quickly.
Thanks,
David.

sort the table on which you want the maximum value and read it. Please find below example code.
TYPES : BEGIN OF ty_mvke,
        matnr TYPE mvke-matnr,
        vkorg TYPE mvke-vkorg,
        vtweg TYPE mvke-vtweg,
       AUMNG type mvke-AUMNG,
        END OF ty_mvke.
DATA : wa_mvke TYPE ty_mvke,
       it_mvke TYPE STANDARD TABLE OF ty_mvke.
data : temp_AUMNG type AUMNG.
START-OF-SELECTION.
SELECT matnr vkorg vtweg AUMNG FROM mvke INTO
        table it_mvke.
sort it_mvke by AUMNG.
read TABLE it_mvke into wa_mvke INDEX 1.
if sy-subrc = 0.
move wa_mvke-AUMNG to temp_AUMNG.
write : temp_AUMNG.
endif.
Thanks,
Sreekala.

Prerequisitions to be enabled/followed for the items that has to come in ASCP Collection Plan

Hi team,
I need to know what are all the prerequisitions to be enabled/followed for the items that has to come in ASCP Collection Plan (ie.,) the Item must be in Active status & Planning Method must be in MRP Planning like wise.
Anyone please give me the details.
Thanks in advance.
Suriya

Please check Support Note 1060245.1 Advanced Supply Chain Planning (ASCP) Item Collection Criteria
Regards,

Make a Thread to get sleep for a time that has decimals

I need a Thread to get sleep for a time that has decimals, for example 3,5 miliseconds but is not possible because the Thread.sleep() admits only long. Is not other way to do it?
Thanks

dannyyates wrote:
Well, there's sleep(long millis, int nanos), but to be honest if you're requirements are that tight, sleep() is probably not the right tool for you because if doesn't really guarantee any level of accuracy.That's true, the accuracy of sleep() depends rather on the underlying OS and hardware. As the docs say:
"Causes the currently executing thread to sleep (temporarily cease execution) for the specified number of milliseconds, *subject to the precision and accuracy of system timers and schedulers*. "
Just run this simple test program, it gives interesting results:
     long start, stop;
     for (int i=0; i<100; i++) {
          start = System.nanoTime();
          try {
               Thread.sleep(5);
          } catch (InterruptedException e) {
               e.printStackTrace();
          stop = System.nanoTime();
          System.out.println("The thread slept for " + (stop-start)/1000000.0 + " ms");
     }On my Windows XP with dual core CPU I get:
The thread slept for 5.801576 ms
The thread slept for 5.778108 ms
The thread slept for 6.134019 ms
The thread slept for 5.437562 ms
The thread slept for 6.064458 ms
The thread slept for 5.674744 ms
The thread slept for 15.354466 ms
The thread slept for 5.869461 ms
The thread slept for 5.785372 ms
The thread slept for 5.804649 ms
If you really need a precise timer you need either a real-time OS or a different solution, the method sleep(millis, nanos) will solve the problem without proper OS/hardware

We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.

i am going to buy iphone 5 32 gb from some before i bought i check the serial number of that iphone on apple web site to cross check but massage is appering that ......'
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us....
can any one tell me what is that mean..... replace what ?

In most cases, what you said is true...however, this is not always the case. Take myself for example...
1: I posted my phone online to sell
2: Someone saw my serial number and called AppleCare to get a replacement phone
3: An inferior AppleCare representative bypassed a component validation (check serial number to the device on hand) and approved the replacement under my AppleCare plan.
4: After noticing this (about 4 days after it happened) and a trip to Apple and a call to AppleCare, all was resolved. My phone is back to being covered under AppleCare+
5: I learned my lesson.
So, as you can see, there is a chance that it can be something else. Although, if the person selling the phone notices, it shouldn't take long to resolve it. Chances are that it is what you said.
Hope this helps

We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us. iPhone 4s.

Hi everyone! I have iphone 4s, which was bought about 6 mounts later and has serial number C2*******TD6 and IMEI ****. When i try to check warranty on the page https://selfsolve.apple.com/wcResults.do i see
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.
And if i try to enter IMEI here i see
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Does it means, that I was bought a non exist iPhone? Or it was refurbished? I need an official answer to take them to seller because I was bought iPhone as a new.
Thank you.
<Edited By Host>

Not from Apple reseller( Im apologize, that you right) Seconв question: how can i contact apple via email to get an official answer?

Aggregate function for a report that has sets

Similar Messages

Maybe you are looking for