JDE web issue with user

When user is trying to log in JDE web. He is able to log in but when he is trying to open any application from JDE web page. He is getting IE standard Error. This is only for one user other users are able to work successfully without any error even in this user's machine. Tool release 8.98

Similar Messages

Issue with User decision handler in UWL

Hi Friends,
I am facing an issue with user decision hander in UWL. We have modified the XML file to show up the comments box to enter the rejection reason, this is working fine with two approval tasks already but the same thing is not working now with a new task id. In the back end(R/3) everything is the same for both the tasks, in the Portal side my portal consultant says the same. But we were not able to figure out the issue. I even created a new task and tried to use implement the handler changes, but still it is not working. Please advice what could be the issue

Hi,
can you elaborate what the issue, what do you mean by not working. you are not getting the reason box, or it's giving error,something like that.
Hope we'll be more clear then about your requirement.
venu

WebI issue with hierarchy display and aggregation

Trying to wrangle what looks like a defect in WebI's handling of hierarchy display and aggregation. We just completed an update cycle and are running BOBJ 4.1 SP4.
The hierarchy is a standard FM Commitment Item hierarchy in which both the nodes and leaves are Commitment Items (i.e. it uses InfoObject nodes, not text nodes). An example of one of these nodes looks like this in BW:
Cmmt_Item A - Node
    Cmmt_Item B - Leaf
    Cmmt_Item C - Leaf
Let's pretend Commitment Item A has $50 posted to it, B has $20 and C has $30. Analysis for OLAP handles this by adding a virtual leaf line to distinguish postings that are on the parent node like so:
Cmmt_Item A - Node       $100
    Cmmt_Item A - Leaf    $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
So you see both the total for the node ($100) and a line for each Commitment Items with KFs posted to them. Our users like this. They can easily see the aggregation and the breakdown.
WebI, on the other hand, will display it like this:
Cmmt_Item A - Node       $150
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
It doesn't create a separate line for the value of the parent node, but it does add it's value into the aggregate. Twice. Modifying the table with the 'avoid duplicate row aggregation' checkbox yields output like this:
Cmmt_Item A - Node       $100
Cmmt_Item A - Node        $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
We're about halfway there. While the top row now shows the correct aggregation and it creates a new line to show the distinct amount on the parent node, that new line appears on the same level as the parent. It's no longer clear that there's an aggregate and a breakdown. And attempting to expand or contract a node will now crash the report with one of those 'Error 16' messages.
Has anyone encountered this issue with hierarchies in WebI? This report was built from scratch in 4.1, so I'm not sure if this affects older versions or not. Or if it would affect any hierarchy that uses InfoObject nodes instead of text nodes.

Without a fix, the simplest workaround I can think of would be to restructure the hierarchy. It can't use postable nodes, so Cmmt_Item A - Node from my example would need to be converted into a text node and the postable characteristic added as a child on the same level as the B and C leaves.
This looks like it would affect anyone using hierarchies with postable nodes in a WebI report.
Another oddity in WebI's behavior here - even though the postable nodes show incorrect sums the sum at the root node is correct. So extending my examples from the original post:
Root Node                    $100
    Cmmt_Item A - Node       $150
        Cmmt_Item B - Leaf    $20
        Cmmt_Item C - Leaf    $30

Integrated Planning: Planning Functions in the Web - Issues with Binding

Hi
We are on SPS 11 and are having some difficulties getting our Planning Functions to execute corerctly in the web templates.
I have created a simple planning function that performs a distribution.
The Planning Function works as expected using the plannning wizard and ristricts the data based on the Filter that I have created on the Aggregation Level as well as the Planning Function Selections.
I have created a query and web template that contains the same restriction as the filter in my aggregation level. The Agg Level filter / planning function and Query Filter all contain the Hierarchy Node Variable ZN_CC1 for the standard Cost Center Hierarchy.
I have created the following 4 Planning Buttons to test the execution of the Planning Function in the Web:
1. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1.
2. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Variable Input String Default ZN_CC1, Planning Function ZDistrib1.
3. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1. Display variable property selected.
4. Planning Function Simple. Binding ref to the DP_1 (Query), Cost Center Characteristic Data Provider Selection Default, Planning Function ZDistrib1.
When the query is executed and a node representing a group in the hierarchy is selected the query is executed and is input ready for the selected group. This is a subset of the hierarchy.
When the above planning fucntions are executed the following results display.
1. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
2. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
3. The variable popup displays and a hierarchy node is selected. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value, that was entered when prompted.
4. The planning function is executed however it is not restricted to the cost center selection based on the query DP1. The planning function is not restricted by the cost center selections.
HOWEVER,
If I goto to the filter web item and edit the cost center filter by selecting and adding all available cost centers to the filter. (This list of cost centers is restricted to the cost centers subordinate to the hierarhcy node selected in the variable)
When the above the planning functions are executed the function is now restricted to the cost centers added to the filter as explained above.
If anyone has had a similar issue with Planning Functions executing for data outside of the Dataprovider Selections I would be interested to know how you managed to get the planning function to retrict to the DP Selections that include hierarchy node variables.
If anyone from SAP can comment before I raise this as an OSS issue it would be much appreciated.
Thanks in advance.
Ian

Hi
Just wondering if this is the correct forum to post BI IP questions?
Any comments if this the right forum.
Thanks
Ian

Issue with users trying to save reports to thier Documents on one drive.

I am working
on a 2013 SharePoint environment and users who use Power View reports. I
have a user who can create reports on a site I have set up (no problems
there). They can also save reports to PowerPivot Gallery they have added
in their Newsfeed for their personal site (no problems here). The problem
is when they try to save the report and go to Documents on one Drive it fails
with below error message. I am an admin but can save just fine to my
documents. I know the error shows an access issue but not sure where or
how to resolve this issue for users. <o:p></o:p>
P.S. the
issue happens before they even save button it happens when they see the My
Documents and try to open it. Again it is there personal SharePoint site
so not sure why they would not have access.<o:p></o:p>
SoapAction: ListChildren
HttpStatus: 500
ServerErrorCode: rsAccessDenied
ServerError: <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsAccessDenied</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException:
The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3412.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsAccessDenied" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
here is actual screen shot
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
<v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
  <v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:7in;height:426.75pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\KEN~1.CRA\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png">
</v:imagedata></v:shape>
Ken Craig

Hi Ken,
It's strange that the User Profile Service Application is not available there. Please use PowerShell to check it, and you can run the command below:
Get-SPServiceApplication | where-object{$_.DisplayName -like 'User Profile*'}
Please ensure you are connecting to the correct farm, and open PowerShell with administrator permission. Meanwhile, add a test user in your Active Directory, and test to see whether the user's My Site can be created.
If the User Profile Service Application can be listed by PowerShell, and the new user's My Site can be created, there might be an UI issue in your Central Administration. Otherwise, you may consider to recreate or restore your User Profile Service Application.
Here are references:
https://technet.microsoft.com/en-us/library/gg985419.aspx
http://sharepoint.stackexchange.com/questions/55087/user-profile-service-application-unable-to-create-a-new-user-profile-service-ap
https://joanneklein.wordpress.com/2011/11/08/recreated-user-profile-service-application-deletes-user-profiles/
Thanks,
Reken Liu

Issue with user exit ZXPADU01 and ZXPADU02

Hi,
I am trying to change the existing record for the info type 0015 for an employee in Pa30 transaction.
my requirement is i need old value and new value when i am changing the existing record in info type 0015.
When i kept break point in user exit ZXPADU01 it is not triggering it is triggering only when we creating the record.
i tried with user exit ZXPADU02 it is not working as per my requirement.
My requirement is :whenever i am changing the existing record(modifying record) i need old value and new value.
Anybody can suggest me how to fix this issue.
Thanks,
Maheedhar

Dear Maheedhar,
The best way to achieve this requirement is to use the PAI user exit ZXPADU02 import parameter PSAVE. The PSAVE parameter contains the PBO original / initial record, before any changes take place.
The INNNN parameter contains the current PAI record as usual, in order to be used for customer check and new values. Thus, you've got both the old and the new record in place, and you can make your comparison according to the business requirements:

Issue with user running Outlook on Windows XP

We are having an issue with many of our users who have had their sent items disappear from Outlook. We are running Exchange 2010 SP2 with Rollup 8. All users on Windows 7 appear to be working fine, it is just users on XP that are having the issue. All
PCs are SP3 with updates applied. The messages were there previously, but the Sent folder shows empty as of Monday. They show correctly in OWA, it is just in Outlook itself that is the problem. If we enable cached mode the items populate, but our standard
policy is to run online with no local PST. We have tried running Outlook with /clearviews and in Safe Mode, but this does not resolve the issue.

Hi
Cached mode will use an OST file not a PST file.
If you remove the contents from the folder and add a new profile does it work? Are you planning on upgrade to SP3 on exchange 2010?

ACS SE 4.1.1.23 patch 5 issue with users

HI There, I am facing very weired issue with ACS SE 4.1.1.23 patch 5. I am trying to add users in ACS it is added successfully but I can not see these users when I click list all users.
But I can see users are increasing in groups when I add users..but when I do list all users it say there are no users defined. and I tried to login with newly created users from devices ....I am able to login with those new users.....
also when I go to that particular group in which I added new users....and say list users in group...I get message from ACS saying that "can not read users from group" ....
what could be issue any one has any idea....customer complained that he was unable to login to devices...with the users created on ACS...when I saw there was no users in database....then I added 2-3 users by looking at old passed and failed authentication... but I dont know how users got deleted automatically...even I tried to see appliance audit logs...could not see any thing which indicates someone deleted users...
please help me to solve this issue..
Thanks

Issue resolved. The CRL that was being parsed from the cert was one level higher than the CRL that needed to be checked. The User CRL was ppointing to the Intermediate CA's CRL. I had to manually change the URL from this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20Intermediate%20CA%201.crl
to this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20User%20CA%201.crl
Mark

Variations issues with User & Group Site Column value

Hi all,
I have created variation sites. e.g. http://mydomain/en-us for english & http://mydomain/de-de for german language. I have created custom page layouts. This page layouts are based on custom content types. I have created a column called "User"
which is type of "User/Groups". I am registering this column to my page layout. http://mydomain/de-de is my default site.
Now I am editing column called "User" on page & save it. It saves data properly. But when I am propagating these changes to another site that is http://mydomain/en-us. It shows me all controls with values filled. but with "User"
column, its showing me blank value.
Any suggestion. ?
Thanks in advance.

http://webcache.googleusercontent.com/search?q=cache:kNlxGIj5f1kJ:sjoere.blogspot.com/2007/11/5-reasons-why-you-should-not-use.html+&cd=2&hl=en&ct=clnk&gl=in
Content types not propagated
Risk
When you add a content type to a page library in the variation source, this type is not automatically propagated to the other labels (see
my previous post). If you then create a page with that content type in the variation source, it does get published to the other labels but loses its content type field values.
Proposed solutions
Set up your site via a site definition that already contains the proper content type bindings to the page libraries. All labels will use the same content types
Put a good governance plan in place to make sure manual changes are done in every label
If this helped you resolve your issue, please mark it Answered

Role reconciliation issue with user ID in acting (HDA) position

Hi all,
I am experiencing an issue with my role reconciliation for user who is in a HDA (acting) position. This user has a 008 relationship to her own position and a A081 relationship to the position she is acting in. Roles are assigned to these 2 positions.
After the programme PFCG_TIME_DEPENDENCY has been run, I would assume the user to acquire the roles assigned to the HDA position and lose the roles assigned to her in her original position. However, this isn't the case.
I am just wondering whether anyone else has encountered this issue and know of a solution to this.
Thank you.
Kim

Kim,
After the programme PFCG_TIME_DEPENDENCY has been run, I would assume the user to acquire the roles assigned to the HDA position and lose the roles assigned to her in her original position. However, this isn't the case.
Before PFUD takes place, change of assignment should be done in PA40(automatically or manually depending on your setup).
Thanks,
Sri

Powershell : Issues with user input collection from Multiple InPutBox Form

I am having issues with getting user input to pass from a form that a user fills out into variables that I can then use in other methods and commands. (ex; SQL Query, SQL Data Add, ... )
I have attached the Powershell script I am using in it's designed form but I am having issues getting the DataCollection function to grab the content of the InputBox and send it to a variable for later use.
Note: I'm running this at this time from the ISE so I can actually see what is going on.
Any help would be appreciated.
DAS
[System.Reflection.Assembly]::LoadWithPartialName( “System.Windows.Forms”)
[System.Reflection.Assembly]::LoadWithPartialName( “Microsoft.VisualBasic”)
$FormDBA = New-Object System.Windows.Forms.Form
$FormDBA.Size = New-Object System.Drawing.Size(300,500)
$FormDBA.Text = "MIS Data"
$FormDBA.StartPosition = [System.Windows.Forms.FormStartPosition]::CenterScreen;
function DataCapture
$SubSID = $InBoxSID.text
ECHO $SubSID
$InBoxTxtSID = New-Object System.Windows.Forms.Label
$InBoxTxtSID.Location = New-Object System.Drawing.Size(25,15)
$InBoxTxtSID.Text = "Sticker ID : "
$InBoxSID = New-Object System.Windows.Forms.TextBox
$InBoxSID.Location = New-Object System.Drawing.Size(130,10)
$InBoxSID.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtUSR = New-Object System.Windows.Forms.Label
$InBoxTxtUSR.Location = New-Object System.Drawing.Size(25,55)
$InBoxTxtUSR.Text = "User Name ; "
$InBoxUSR = New-Object System.Windows.Forms.TextBox
$InBoxUSR.Location = New-Object System.Drawing.Size(130,50)
$InBoxUSR.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCN = New-Object System.Windows.Forms.Label
$InBoxTxtPCN.Location = New-Object System.Drawing.Size(25,95)
$InBoxTxtPCN.Text = "PC Name : "
$InBoxPCN = New-Object System.Windows.Forms.TextBox
$InBoxPCN.Location = New-Object System.Drawing.Size(130,90)
$InBoxPCN.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDPT = New-Object System.Windows.Forms.Label
$InBoxTxtDPT.Location = New-Object System.Drawing.Size(25,135)
$InBoxTxtDPT.Text = "Department : "
$InBoxDPT = New-Object System.Windows.Forms.TextBox
$InBoxDPT.Location = New-Object System.Drawing.Size(130,130)
$InBoxDPT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCT = New-Object System.Windows.Forms.Label
$InBoxTxtPCT.Location = New-Object System.Drawing.Size(25,175)
$InBoxTxtPCT.Text = "PC Type : "
$InBoxPCT = New-Object System.Windows.Forms.TextBox
$InBoxPCT.Location = New-Object System.Drawing.Size(130,170)
$InBoxPCT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMAK = New-Object System.Windows.Forms.Label
$InBoxTxtMAK.Location = New-Object System.Drawing.Size(25,215)
$InBoxTxtMAK.Text = "Make : "
$InBoxMAK = New-Object System.Windows.Forms.TextBox
$InBoxMAK.Location = New-Object System.Drawing.Size(130,210)
$InBoxMAK.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMOD = New-Object System.Windows.Forms.Label
$InBoxTxtMOD.Location = New-Object System.Drawing.Size(25,255)
$InBoxTxtMOD.Text = "Model : "
$InBoxMOD = New-Object System.Windows.Forms.TextBox
$InBoxMOD.Location = New-Object System.Drawing.Size(130,250)
$InBoxMOD.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtOPS = New-Object System.Windows.Forms.Label
$InBoxTxtOPS.Location = New-Object System.Drawing.Size(25,295)
$InBoxTxtOPS.Text = "O.S. : "
$InBoxOPS = New-Object System.Windows.Forms.TextBox
$InBoxOPS.Location = New-Object System.Drawing.Size(130,290)
$InBoxOPS.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDIS = New-Object System.Windows.Forms.Label
$InBoxTxtDIS.Location = New-Object System.Drawing.Size(25,335)
$InBoxTxtDIS.Text = "Disposed : "
$InBoxDIS = New-Object System.Windows.Forms.TextBox
$InBoxDIS.Location = New-Object System.Drawing.Size(130,330)
$InBoxDIS.Size = New-Object System.Drawing.Size(120,20)
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.Add_Click({DataCapture})
$FormDBA.Controls.Add($button)
$FormDBA.Controls.Add($InBoxTxtSID)
$FormDBA.Controls.Add($InBoxTxtUSR)
$FormDBA.Controls.Add($InBoxTxtPCN)
$FormDBA.Controls.Add($InBoxTxtDPT)
$FormDBA.Controls.Add($InBoxTxtPCT)
$FormDBA.Controls.Add($InBoxTxtMAK)
$FormDBA.Controls.Add($InBoxTxtMOD)
$FormDBA.Controls.Add($InBoxTxtOPS)
$FormDBA.Controls.Add($InBoxTxtDIS)
$FormDBA.Controls.Add($InBoxSID)
$FormDBA.Controls.Add($InBoxUSR)
$FormDBA.Controls.Add($InBoxPCN)
$FormDBA.Controls.Add($InBoxDPT)
$FormDBA.Controls.Add($InBoxPCT)
$FormDBA.Controls.Add($InBoxMAK)
$FormDBA.Controls.Add($InBoxMOD)
$FormDBA.Controls.Add($InBoxOPS)
$FormDBA.Controls.Add($InBoxDIS)
$FormDBA.ShowDialog()

Change this:
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.DialogResult='Ok' #<<<<<-------
#$button.Add_Click({DataCapture})
Remove function andrun like this:
if('Ok' -eq $FormDBA.ShowDialog()){
$FormDBA.Controls|%{$_.Text}
With names you can get values by control name.
¯\_(ツ)_/¯
This suggestion works for the purpose I needed.
If I could, I would attach the file instead of pasting the script so you can see what all I am using this to do.
But in short, we have a main form we use to pull records from a database and call up an application at the click of a button for remote assistance. However, we seem to now need the ability to have this application to edit and add new records into said
database. That's where this second form came in and also when I hit my issue with the information capture.
At this time I'm getting this to format the information collected so that I can start using using it with SQL commands.

Wss3 Issues with user check in files from within excel or word 2010

I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621

Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE.

Issue with users accessing video card and /dev/nvram

Hello,
I have Lenovo x60s and i can't access with normal user (group users) the file
/dev/nvram
ever I restart de computer have execute "chmod 777 /dev/nvram" for fallowing access for users
and with users i can't use video i810 alone use vesa
with root i can use driver i810 on xorg, why??
I don't understand?!?!?!

The problem with my video is with root i can play games 3D, with users i can't, my config video card on xorg:
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa" ---->> Now I write "VESA", while I write i810 i can't execute "startx" with normal user
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
the /dev/nvram is device when i use especial keys of keyboard on my notebook,
ever restart my pc the permissions change, I have execute "chmod 777 /dev/nvram" else i can't use with normal user.
i think the udev always create this device on start and always create with the permission alone read and write for root, but I just find that the group is kmen and I add my user in the group.
I restart system and verify the result.

Issue with User web page into Call Manager

Hello
I have an issue where all my users can log into their User page on UCM but when they make a change to speed dial or anything else, the change does not reflect on the phone in UCM. Doing a reset from their web page doesn't reset the phone. This is UCM 7.1.5 and the standard ccm end user group is enable for all end users.
thanks

Hi Bill -
Have you verified your User Management Roles and effective permissions? Go to User Management - Roles - select Standard CCMUSER Administration and for the permissions you want, ensure both Read and Update are selected.
Role Information
Application
Cisco Call Manager End User
Name
Description
Resource Access Information
">Resource Description Privilege
read                                               update
CCMUser: Access List
read                       update
CCMUser: Device
read                       update
CCMUser: Directory
read                       update
CCMUser: Fast Dials
read                       update
CCMUser: IP Phone Services
read                       update
CCMUser: Line Settings
read                       update
CCMUser: Personal Address Book
read                       update
CCMUser: Plugins
read                       update
CCMUser: RemoteDestination
read                       update
CCMUser: Service URL
read                       update
CCMUser: Speed Dial User
read                       update
CCMUser: User Settings
read                       update
You can also check an individual's effective permissions by using these procedures:
Viewing a User's Roles, User Groups, and Permissions
This section describes how to view the roles, user groups, and permissions that are assigned to a user that belongs to a specified user group. Use the next procedure to view the roles, user groups, and permissions that are assigned to a user in a user group.
Note: You can also view user roles by using User Management > Application User (for application users) or User Management >End User (for end users) to view a particular user and then display the user roles.
Choose User Management > User Group.
The Find and List User Groups window displays.
Find the user group that has the users for which you want to display assigned roles.
Click the name of the user group for which you want to view the roles that are assigned to the users.
The User Group Configuration window displays for the user group that you chose. The Users in Group pane shows the users that belong to the user group.
For a particular user, click the i icon in the Permission column for the user.
The User Privilege window displays. For the user that you chose, this information displays:
User groups to which the user belongs
Roles that are assigned to the user
Resources to which the user has access. For each resource, this information displays:
Application
Resource
Permission (read and/or update)
Now if both items above look OK, you might check your DB replication status. I assume you have a Publisher and one or more Subscribers? User phones registered to Subscriber? You can check replication several ways:
CLI
RTMT
Unified Reporting on CUCM administrator web page - select "Unified CM Database Replication Debug" report. This is the easiest.
The desired Replication State is 2.
Here is some further information:
Check the DB replication status on all the Cisco Unified Communications Manager nodes in the cluster to ensure that all servers are replicating database changes successfully. You can check by using either RTMT or a CLI command.
• To check by using RTMT, access the Database Summary and inspect the replication status.
• To check by using the CLI, enter the command that is shown in the following example: admin: show perf query class "Number of Replicates Created and State of Replication"
==>query class :
- Perf class (Number of Replicates Created and State of Replication) has instances and values:
ReplicateCount -> Number of Replicates Created = 344 ReplicateCount -> Replicate_State = 2
Be aware that the Replicate_State object shows a value of 2 in this case. The following list shows the possible values for Replicate_State:
0—Replication Not Started. Either no subscribers exist, or the Database Layer Monitor service is not running and has not been running since the subscriber was installed.
1—Replicates have been created, but their count is incorrect.
2—Replication is good.
3—Replication is bad in the cluster.
4—Replication setup did not succeed.
I'm thinking it's more your Roles/permissions and not replication, but I included just in case. Hope this helps!
Ginger

Issue with user mapping and SAP reference system

Hello Gurus,
I have this strange system behaviour when preparing my system for single sign-on using user mapping.
Case 1.
In the user management property category, I have the following defined.
Authentication Ticket Type - SAP Logon Ticket
Logon Method - UIDPW
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_PRD
Result= when I go to identity management to assign the reference system (the default alias - SAP_PRD)...I do not see the system alias there.
Case 2:
In the user management property category, I have the following defined
Authentication Ticket Type - SAP Logon Ticket
Logon Method - SAPLOGONTICKET
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_DEV
Result, when I go to the identity management to assign the refernce system (the default alias - SAP_DEV), I see it there.
What might be my issue? Does it mean I can't assign SAP reference if I am using UIDPW as logon method?
Please help me.

Hi Mahesh,
Thanks for the feedback. I am relatively new to EP...so please I won't mind if you can guide me on how to go about this.
This is what I did...
I chose System Administration > Permissions
In the PCD, I located my system with the alias, SAP_PRD
It opened up the permission assignment area.
Now I have these permissions set
Administrator - Full Control
Administrators - Full control
com.sap.caf.eu.gp.roles.superuser - Full control
Everyone (built in group) - Full control
Everyone (Everyone role)- Full control
super_admin_role - Owner
For all the above End User box is checked.
I can't find anyone end user group .
Once I pick UIDPW, the alias disapperars from the reference system list.
Please help.

JDE web issue with user

Similar Messages

Maybe you are looking for