AI CC Layer Palette Annoyance

For some reason AI has a tendency to toggle my layers open... This displays each object and sends lower layers out of sight (in the palette)... So I am continually having to toggle the layers closed. I did check the box "Top Level Only" but that doesn't help.... Is there a way to correct this behavior?

This is happening because the layers flyout >>new sublayer msut have been used. To get rid of this,
select all the elements in the offending layer
cut
delete all sublayers except the target layer name
Layers flyout Paste remembers layers >> off
Select the layer you want to put the elemnets back in, and paste in front

Similar Messages

  • Is there a way to shift select multiple objects in layer palette, not just highlight multiple object

    Hi,
    Is there a way to shift select multiple objects in layer palette, not just highlight multiple objects?
    I would want to do this when I have a bunch of objects hidden under some other objects on the artboard. This feature is available in PSD, so I assume Illustrator should have it.
    Thanks!

    Thanks for the reply, Harron.
    I'm using CS4 & below.
    Highlighting object - click on object in layers palette & it turns blue
    Select object - click on object in layers palette to the right of the circle, which creates a square, and selects the object on the artboard
    How do I shift-select multiple objects in the layers palette...select 50 objects with a click, then a shift-click? Shift-select works for highlighting, but not selecting. On most programs shift-select is used to grab a bunch of stuff...:0)
    In the past I have inadvertently selected multiple objects in the layers palette, by somehow alt?-dragging over the layers...or something...I can't re-create it.

  • Photoshop CC 2014 hangs for nearly 15 seconds when using Layer Group Layers or Layer Palette Group from Layers commands.

    Photoshop hangs for nearly 15 seconds when using Layer > Group Layers or Layer Palette > Group from Layers commands. NOT on creating new group and creating layers and drag-n-dropping layers into group manually in Layer Palette. Got a UI design file with nearly 800 layers and lot of groups. This doesn't occur in smaller files. Using OS X Mavericks, Photoshop CC 2014.2.2, Mid 2014 15-inch Retina Macbook Pro.
    I understand that the solution would be just to cut the file into smaller files and design each UI view in a separate file but that would be painful. And it does not seem to be a very hard task to just group layers.

    Does the document also have a lot of layer comps?
    And can you post that document or send me a copy of it so we can see exactly why it is hanging?

  • How to separate layer in layer palette using colour?

    How can I separate the layer in layer palette using colour to increase the visualbility like the image below?

    You could right click on the eye in the layer thumbnail
    or from the layer panel flyout, select layer/group properties.
    MTSTUNER

  • What's showing in the layer palette is different than what is on the canvas - Illustrator CS6

    I am not a super user in Illustrator but I know my way around it and understand more than the basics.  I downloaded this vector from Shutterstock, but what I am seeing on the layer palette is different from what is on the canvas and if I try to save or export it to anything else the result comes out looking like the layers palette - almost black.
    And it's only happening on a few of the objects, as you can see from the image, the apple and other leaves are fine.  It is also doing it to the pumkin and some of the grapes in the cornicopia.  Any idea what is going on?  I checked all my layers to see if something looked weird but they all look fine...
    When I open the original .eps file from Shutterstock in Photoshop, I get the same black objects.

    What OS? If Mac, then this might be affecting you.
    http://forums.adobe.com/thread/1070677?tstart=0

  • Please bring color back to vector shapes in Layer Palette with no-thumbnails.

    Please bring the color box back to vector shapes!
    I am one not to use images in my layer palette, and in CS5 this was a breeze, but now the icons are different, there is no white box on the icons anymore (which really helps when scanning, and differentiating from folders), and I can't preview the color of the vector shape that I created in Photoshop. Vector shapes are a big part of my work. Before it would show a box with the color, now it shows nothing. The linking vector box is not neccesarily important as long as when I click it, the points become live.
    Also the dividing lines for layers is not strong enough, doesn't have to be white, but at least gray. Black is definately not helping to divide the layers. And for nested layers, having the dividing line go half way to the edge really helps alot.
    I noticed that a lot is different about the "no-thumbnails" version of the layer palette, and some I can live with, some changes I cannot. But being able to preview the color of a vector shapes is important for me, and seeing the white box behind the icon really helps when scaning a lot of layers. I've attached a comparison, also I have attached an image of how my layer palette looks on a daily basis from CS5 and CS6, I also opened the folder, and matched the palettes so you can see what I mean. Those little things really make a difference when scanning up and down 50-100 layers.
    Even though setting the layer palette to no images may be a rarity among photoshop users, it's something that I value in photoshop, especially since my documents have hundreds of layers.

    I think it was a fair assessment given the circumastances of the answer you provided, Jeanne. Also, another thing is that posting under an "employee" account, you are speaking for the company. You are representing the company whether it is your intention or not. Even if you explictly state that what you say is your personal opinion, people might have mixed feelings about what you say and mistake it for a belief that the whole company shares. So be careful with that, just as a note for the future.
    But anyway, as for the issue at hand... That still doesn't give us anything other than "we won't do it." And again, I advise you to look through the post I referenced to. There are some very easy solutions there that help make the layers palette much easier to scan and work with. It's not too difficult to fix this and as already said above, you're already working on a fix for the thumbnails themselves anyway.
    The solution to this problem could be as easy as this (I can provide another graphic for the darker UI settings, if you want):
    What you do is:
    Display a bigger thumbnail of the layer icon (yes, that will use up more space in the no-thumbnail view, but that's not a huge problem compared to what you have now)
    Clearly display the content of the layer (in this case, both layers are gradients, but it could also just have a solid color fill)
    Lighten the color of unselected layer's names (to make the properties of the layer itself stand out better),
    Make the layer thumbnail itself (if it's a vector layer) toggle the path outline on and off and
    Bring back the separation line from CS5, which indicated the layer's position in the grouping hierarchy.
    If you do that, you've already solved quite a lot of the scannability and readability problems. In the future, you could improve the iconography to be better optimized for quick scanning, to make them stand out better (give them more depth) and so on, but for now, this should be enough to make things better for most people. And also, this will not take up too much development time. You've already got the logic of the separation lines from CS5, for example. Shouldn't be too much of a problem to implement in CS6. I'm not going to speak for the other things, because I don't know too much of the internal workings of the program, but it shouldn't be too much of an issue.
    Trust me, this change will make a world of difference. People will love this even if they don't understand that it's there or why they love it.
    Would you like me to provide detailed wireframes and documentation, so your designers don't have to worry their heads about this one? Just asking, because this is a change that should really be pushed through, no matter what.
    Cheers,
    Riho Kroll

  • Missing Layer Palette - How I resolved it ;) ...... illustrator 10

    Hi all,
    I had recently encountered a problem where I couldn't get the layer tool (F7) to show up. The "delete AI Pref" course of action didn't work for me. To cut the story short, this is what I did to get it working.
    # Search for *.aip in the system
    # Found "Layer Palette.aip" in C:\Program Files\Adobe\Illustrator 10\Support Files\Required
    # Made a copy of "Layer Palette.aip" to C:\Program Files\Adobe\Illustrator 10\Plug-ins\Extensions
    Good Luck!
    KastleKonfusion
    PS. btw, this dinosaur is still using Illustrator 10. :D

    sathishkumarlj wrote:
    thnx for u r good tips...... am very suffered n tis problem... nw its working good after am folw u r tips....
    thnx once again..... i wanna knw y its happened oftenly......
    ... which in the Queen's English meaneth?
    Christ I hate these lazy people who can't be bothered to write properly.
    Where's JET? Sure he'll agree.

  • Layer Palette Empty

    Working in version CS4 on a file with lots of picts/text etc and my only layer in the layer palette does not show any objects listed.
    Is there a trick I am missing? I deleted the Preferences by holding shift/con/opt/com but it didn't help.
    Thanks!

    That explains it.
    I'd like to be able to delete items directly from the links and/or layer palette, and relayer/reorder items (without going to Arrange) as in Illustrator. Guess I'm out of luck.
    Thanks Bob.

  • Layer palette not maintaining state, what to do??

    Problem: Layer palette chages state between the closing and reopening of a file.
    What I would like to be able to do is open a .ai file and have the layer palette exactly the way the way I left it when I closed the file. Currently upon reopening a file many of the layers will be fully expanded and I have to go through and collapse them all.
    Is there a way to force Illustrator to maintain layer palette state between file sessions?
    Thanks.

    The behaviour - or the issue - has been introduced in Illustrator 9, the first version which included nested layers. The behaviour has been legitimately criticised pretty often.
    However, if you want to collapse/expand all layers in one step you might consider converting your main layers into sublayers. That is:
    • Create a new 'master layer' on top of the entire stack of main layers
    • Drag all main layers onto the master layer in order to make them sub layers of the master layer
    • Now you can Alt/Option Click the triangle on the left-hand side of the master layer in order to collapse or expand all sublayers
    Of course, this way is only applicable if using sublayers is an option for you.

  • Layer Palette disappeared

    I have been using PhotoShop Elements 2.0 for several years.   Today while I was working on a project involving manipulating several layers my Layer Palette disappeared!   I had been working on the project for about an hour and the layer Palette had been in its customary place the whole time.
       Does anyone out there know how I can get it back?
       I tried restarting my computer a couple of times and even reinstalled the PhotoShop software, but the Layer Palette remains absent!

    You can try Window>Layers or Window>Reset Palette Locations.
    If that doesn't work, try resetting the pse2 preferences by holding down
    the keyboard keys: Shft+Alt+Ctrl at same time as you start pse2 and then click ok in
    dialog that appears.
    MTSTUNER

  • Layers disappearing from layer palette

    Named layers that have been appearing in the layer palette
    have now disappeared from the palette although the layers are still
    appearning on the page. I am working on a template if that makes
    any difference in Dreamweaver 8.

    If they are in non-editable regions of the page they will not
    be shown in
    the layers panel.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Toni L" <[email protected]> wrote in
    message
    news:f6f48c$h4n$[email protected]..
    > Named layers that have been appearing in the layer
    palette have now
    > disappeared
    > from the palette although the layers are still
    appearning on the page. I
    > am
    > working on a template if that makes any difference in
    Dreamweaver 8.
    >

  • Remember Layer palette 'panel settings-'?

    Is there a way to keep my layer palette settings to my liking? Every new document I create starts me out with tiny icons and each object has its own sub-layer.
    I like 64 pixel icons, top layers only. (Top layers only make it easier to work with After Effects)

    Layer attributes are part of a documents attributes. The great thing about this is it's actually really easy to make it so every new document you open has the attributes you want. There are two ways of doing this. By modifying or creating new document startup profiles, or by creating custom template files and opening new documents from these. I recommend going the route of template files as they are more flexible, you can save them wherever you like. Here is an article with more info about using them:
    <http://blogs.adobe.com/infiniteresolution/2009/03/working_smarter_with_templates_1.html#mo re-12>

  • Layer palette issue. I choose a layer and when I use move tool on that layer PSCC jumps to another layer

    I am Using Photoshop CC 14.2.1x32. When I choose a layer in the layers palette and then use the move tool to re-position an element on that layer, PS forces a jump to another layer. The only way I can re-position is by using free transform on the layer I want to work on. What is happening with PS CC? Please help. About to dump CC and go back to CS 6

    You might have been able to change the Auto Select option from the default Group to the usually more user friendly Layer.  It's one heck of a useful feature, so get used to using it if you can.  For instance, if you have a lot of layers, it can make it a lot easier just to find a particular layer in the layers panel.

  • Layer palette still opens everything on launch

    Why is this bug still in this program? This is my palette as saved...
    Same palette after relaunching...
    ....and it goes on like this for another 10 inches or so. Every layer and group was minimized prior to saving. Does anyone in the AI development team have any idea how unbelievably annoying this is? It's been like this for years. What will it take to get this fixed?

    You can differ with me all yopu want and it is not random as I pointed out and as Scott pointed it out and it is no a bug.
    You don't have to heed this advice but if you all keep calling things a bug when they are things which you do not like it will not get changed no matter how much it is called a bug.
    here is the reason the teaam and the people who make the decisions to fix bugs or implement feature request will look at it based on what kind of complaint it is and if call some a bug which is not a bug well they are going to say "It's not bug so they just don't understand that is the way it was designed to work!" So they will ignore it!
    Do you see what I am telling you?
    If on the other hand you face the fcas and tell them you do not like this behavior because I lose time closing all the layers because he list can really get long beccause I create sublayers as a tool to help me arrange amy work and to navigate through the layers panel in an effective way which is important to me they will listen to you.
    I agree you should have control over this because believe it or not there will be users who prefer it the other way.
    This is a type of option that can be had in a point release which they intend to dosince they have the Cloud method of distribution this is the kind or alteration in behavior that can be had if you make a feature request and give them some good sound reason for doing this for you.
    I will point out something, recently there have been several of the team that has chimed in on some of the forum posts, I don't know them but from their comments they seem like suoper professionals and they just might listen to you.
    Make a feature request and who knows and make a good positive agrument for the feature.
    It always works they are responsive.

  • Set Action to Layer contains in Layer Palette

    How can i set Action and Intent to Layer (contains in Layers Palette)
    I have GeoPDF File and
    I am created Layers list into layers palette
    I want to set visible or invisible action on user selection of layers
    Please may i get some suggestion.........

    Do you mean a layer "AutoState" - where a layer is automatically enabled/disabled based on a user action (like zooming or printing)? or a SetOCG Action that is invoked from a button or menu? or something else?

Maybe you are looking for