Ai-recovery complains about 2 hard drives

I bought a notebook that has 2 hard drives. It came with windows 7 premium installed. The first disk contained 2 partions and the 2nd had one partion formatted as ntfs. I burned the recovery disks then replaced windows with linux. Now, I want to restore windows. But, when I run the recovery disk it complains:
"The recovery process has detected more than one hard drive. To ensure the accuracy of the recovery, please remove additional hard drives and keep only one in the system, then run the recovery process again. The system will now power off."
Should I do what it says, or is there a simpler solution? Is this normal?

About the advanced option. It doesn't get far enough to select any options. It displays the error message then shuts down when you click ok.
After deleting the partions using fdisk from a linux cd, I got the same error message. I then used a windows 7 dvd to run bootrec /fixmbr to replace grub on the master boot record. Still the same error message.
So, I think that means you have to do what it says. I did that, removed the 2nd hard drive and have restored the system and am now formatting the second hard drive.
So, buyers of asus laptops beware. If you have more than one hard drive, you will be asked to remove one to restore using it's recovery software, maybe.

Similar Messages

  • What does Apple HW Test really test about hard drive?

    My 2002 FP iMac was recently jolted. The internal hard drive is no longer recognized. Here is what I know:
    When I boot with the Apple Hardware Test CD which came with the computer, it does not recognize anything wrong with the hard drive.
    When I boot from an external hard drive, I get a dialog with buttons to Initialize, Ignore, or Eject the hard drive.
    When I open Disk Utility (external HD boot), it can see the disk, but says it is unformatted.
    I also downloaded a trial data recovery program and it could not find anything identifiable on the hard drive.
    I don't really know what the Apple Hardware Test program tests with the hard drive, so I don't know how to interpret the information I have.
    My questions:
    Is there any hope for salvaging anything from the hard drive? (Probably not?)
    Is the drive itself likely to be OK if I format and re-install my OS? (Is that what the HW Test is telling me?)
    I have not tried to format the drive, because there are a few things I would really like to salvage. I have also not opened it up to examine anything on the inside because I would not know what to look for.
    Suggestions for how to proceed will be welcome.

    The data on the ill-fated hard drive may be recoverable; could be
    there has been damage to the drive or the software on it that lets
    the computer read files from the drive.
    Some disk utilities such as Disk Warrior could see about trying to
    fix the drive; although if physical damages exist, it can't fix that.
    The booted OS X Installer's Disk Utility has options in the Installer
    menu bar (drop down menu to select other things, when not just
    reinstalling) and you could see if OS X's Disk Utility from the booted
    Installer disc could give you a status report on the drive in Verify, &
    also see what it says about 'Repair drive' when chosen to try a fix.
    Sometimes, the OS X's Disk Utility can't fix something, and at that
    point, other utilities (retail on DVD) may be able to. Then, the tossup
    is, whether or not you want to pay for the utility to fix an old drive, or
    put the money into a new one.
    Data Recovery software is available as download, so if the old hard
    disk drive were removed from the computer and a new drive put in,
    later on the failed drive could be investigated through use of software
    (such as those which can recover, then you pay to unlock results)
    and that is another way to consider addressing the old drive contents.
    Some would suggest, if you had Disk Warrior or some other disk utility
    that could fix the old drive good enough to try and get data off it, maybe
    even a full clone or just the files you need, then you would not need to
    get the data recovery software. Of course, that software which runs to
    see if you have recoverable files, can do that part for free.
    The AHT may see the drive is present, while not recognizing a
    failure in its firmware or in its directory, etc. Some kinds of disk
    utilities can try to rebuild and replace a damaged directory or
    other bits of software on the drive so it can be read again.
    Usually, the test for the hard disk drive is Disk Utility on the
    OS X Installer; and that gives you the boot version that sees
    even a healthy drive as an unmounted and repairable volume
    when it is correct and not beyond the limited ability of the utility.
    Hopefully something practical comes from all these words...
    Good luck & happy computing!

  • DATA RECOVERY for a hard drive that isn't recognized.

    Hi,
    I just found today that my hard drive is bad. I had one of those geek squad people come look at it and he was able to get it to boot from the Mac OS X Leopard CD, but my hard drive was no where to be seen.
    I'm taking the hard drive to one of those places that specializes in data recovery. But, I was wondering...can they retrieve files that were on the desktop? Or are those files gone forever?

    Hello Again! Now that there is serious soul searching going on now would be a good time to think about your backup plans for when you get everything up and running again. If the drive is going off to the recovery center worrying further won't help so I suggest coming up with a good recovery plan for times like these. Hard drives are going to fail and they always seem to fail at the most inopertune times but with a good backup plan this could have only been a restart. A second hard drive is a must if there is anything at all important on the computer. It can be an external or internal. I have 4 320 gig SATA drives in my G4 (and I really don't have anything very important on there) I usually keep two secondary bootable clones and rotate between them in case of a backup failure. Then I try to keep another clone on an external and finally I keep a partition with only a fresh install and my utilities for drive repair. I tinker a lot and I've screwed things up a few times but it really wasn't even a minor irritation. Good luck. Tom

  • Recovery to external hard drive instead of disks

    How  would I write the recovery data to an external hard drive?

    panbroil wrote:
    How  would I write the recovery data to an external hard drive?
    It's not clear what you are trying to do.  If you are asking about using the Recovery Disk Creator but redirecting to an external hard drive, then the reply is that it is not possible to do.  The recovery program requires writing to an optical disk.
    If you are asking how to make a recoverable backup to an external hard drive, then you'll need an additional program like Acronis TrueImage to do this.
    If neither of these solutions are correct for the question you had, please give us more to work with.

  • Recovery from External hard drive

    So I backed up all my files onto an external hard drive using the hp program, before reinstalling windows. However when I go to restore them it goes through and restores some of the files and then when it gets to 100% and it says please insert disk 2. I cant think of what it would mean as disk 2 I only used this one external hard drive to back it up, and now most of my files are missing. Can anyone help? Is there a way of viewing what files are contained in the .swm files or can anyone tell  me what to do about this disk 2 thing?

    Lots of programs out there from which to choose. In the meantime, don't access the drive.
       18 Free Data Recovery Software Tools
    -Jerry

  • Recovery Discs New Hard Drive Size

    Hi everyone,
    I had created a set of recovery discs for my HP Pavillion G7 notebook. It was 6 discs. The original hard drive that the Recovery Discs were made from was a 750GB Hard Drive.
    The hard drive started to die on that notebook. I have another notebook that I don't use that has a new 500GB in it. I switched out the Hard drives as they are compatible.
    My question is can I use the Recovery Discs that I had made from the 750gb drive that now is dying and recover on the new hard drive that is 500GB. I started the process but it stalled about halfway through on disc 4. Is that because I put in a smaller hard drive?
    At this point do I need to buy a hard drive that is at least 750GB? 
    Please advise and thanks in advance!  
    This question was solved.
    View Solution.

    Hi,
    Recovery media can have issues if used on drives smaller than the original.
    Another option you could consider, as your notebook originally shipped with Windows 8 and the activation key is stored in the Bios chip, would be to create your own OEM Windows 8 installation disc.
    For details on how to do this, see the 3rd post by Huffer on the following link - Note:  the download is subject to a usage cap, so you may need to try over a period of several hours before it successfully starts
    http://h30434.www3.hp.com/t5/Notebook-Hardware/Need-Product-key/m-p/2592099/highlight/false#M96668
    Additional software/drivers you may require can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • T43 - Recovery from dead hard drive

    I have a T43 (2686-DJU) with hard drive failure (noticed for the first time with an error message on start-up saying "media test failure, check cable ... operating system not found". After discussion with the Lenovo support folks they confirmed the hard drive needed replacement, and I have ordered a new one (part 13N6917) - I am wondering how I go about getting the new one up and running as well as rescue and recovery since I was not smart enough to make a rescue CD. Should I order one? Is there some way to pull recovery info off of my mostly dead hard drive?
    I apoligize for what I presume are pretty basic questions - maybe someone can just point me to a resource that I have simply not found yet.
    Many thanks.
    mjeastman

    My hard drive failed completely and the Apple Store offered to "try" to recover it for $2000+. I went to a company called ProSoft http://www.prosofteng.com/ and they were very helpful. They sold me some software for around $100 to recover all of the data. It took over a week for the software to run correctly, but I got EVERYTHING back and ProSoft was so helpful with all of my questions.
    Good Luck

  • Rescue and Recovery -- USB external hard drive

    Can anyone recommend the best external hard drive to use for Thinkvantage Rescue and Recovery?  I've been doing some research and I'm concerned about the Maxtor "one touch" software.  If I choose to purchase a Maxtor external hard drive should I go in and delete any software on the drive before I back up from Rescue and Recovery? I have been having a lot of problems with Rescue and Recovery -- it's difficult to delete past backups, and I get hangups.  But eventually it usually backs up.  I have read reviews for the Maxtor one touch software and it sounds like it doesn't work well for restoring an entire system (problems with certain files, such as hidden files, etc.).  But maybe that's not true?  Also, do you recommend that I delete all previous backups before running a Rescue and Recovery backup?  If not, if I ever had to restore from it, would it automatically use the most current backup?
    Thanks in advance for any advice!  I'm a novice, but I want to make sure that everything is backed up properly.

    Herik,
    I'm not sure  I'm looking in the right place - the folders you specified don't exist, or they aren't where you indicated. I can only get to "Rescue and Recovery" in the HK - Local Machine registry folder - nothing further there. Here's what I have:
    http://files.iclippy.com/109436/1251279402.jpg
    Am I looking in the right place?
    Note from Moderator:  Image(s) >50k converted to link(s).
    E
    Thinkpad R40 2897-54U running Windows XP Pro

  • Toshiba A500-1H1 after recovery on new hard drive cannot boot

    Hi, I had to replace hard drive because old one is broken. I used recovery media I've created after opening laptop first time as you suggested with Toshiba support. Recovery is fine, but during windows configuration I had information about not certified signatures and windows cannot boot. There is error suggesting that maybe hardware was changed.  So my question is ? Buying Toshiba laptops I cannot change my harddrive, so if any part of Toshiba is broken I have to buy new notebook ? Or maybe I can access to my Windows764bit key and download from microsoft windows and install and configure this by myself ?
    Please help, I need this notebook for work ! Best Regars,Paul

    Hi, thanks for your reply - I FOUND A SOLUTION, a quick description about my problems is below. 1. First of all. My Toshiba HDD is broken in that way that it cannot be booted. I did a couple low level tests (one took about 90 hours !!) and surface is free from bad sectors. Disk is in very good condition, but I suppose controller in disk is broken because everything is installed correctly, recovery takes about 20 minutes and after rebooting I have typical information about problem with reading boot information, BCD, 0xC000... And so on. So disk is working now as storage on usb. This disk was 320GB - original from Toshiba. 2. Then I tried use new one disk: Samsung 1TB. And I had this problem with booting again, but info from windows was about not certified drivers (when it tried install WiFi, and other drivers). Then I post this post here, but meanwhile I contact my support in Poland and they suggested me there can be a problem with DISK SIZE - they said this is TOO BIG FOR RECOVERY.. That was very strange for me - I heard first time the problem can be with too much space, not with not enough space Anyway I decided to buy new SSD 250GB (smaller than original Toshiba) hard drive. My recovery took me about 10 minutes. I have SATA3 SSD but Toshiba support SATA1, but anyway my computer seems to work 3x faster than before  
    So the problem was with original disk, controller (boot sectors maybe), and with too large new disk so Toshiba recovery disk couldn't manage.
    Thank you for your concern. Best Rgards !

  • Data recovery from external hard drive

    I'm sick! I was attempting to format my flash drive and I accidentally chose the wrong drive and formatted my Toshiba 3.0 external USB hard drive with over 350GB of data on it. Is there any way at all to recover my files?

    Lots of programs out there from which to choose. In the meantime, don't access the drive.
       18 Free Data Recovery Software Tools
    -Jerry

  • How do I restore backup1.swm files created during system recovery from external hard drive.

    On my hp dm1 with windows 7 In full detail, this is what I did. I clicked to do a system recovery, it asked if I wanted to backup the files, I said yes. It said it backed up my files on the external hard drive. I continued the system recovery. It set my computer back to factory settings. I tried to recover my backup, it acted like it was restoring the files and showed them going into the c: area in a folder. I open the folder and it says the folder is empty. I hit properties and the folder contains 10mb+ of data. I go back into my LaCie drive, there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else. Have a 12 page research paper in these back ups that is due in a few hours so any help will be greatly appriciated.

    @Daniella1985,
    If the standard procdure of locating the program launcher (a .exe file) on the first backup media (disk 1 or the external storage device) is not working, then you can manually extract the files using 7-zip.
    7-zip can be found here.
    Once 7-zip is installed, open it and navigate to the first .swm file of the backup.  Right-click the .swm file and select 7-zip>open archive.  Once that opens, it should reveal the contents of the .swm files.  If the file contains something you want to keep, you can either extract each invidual file or extract the entire directory.  If you want to extract each individual file, highlight the desired file and click the extract button at the top.  If you want to extract the entire directory, make sure no items are highlighted and click the extract  button at the top. 
    This is a manual process and it can be a large task depending on how many files were backed up, but it is one method to get the backedup files when the standard procedure is not working.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Data recovery for crashed hard drive?

    Ok, recently my macbook pro internal hard drive crashed (I was receiving the question mark on folder at bootup). I have recently purchased a new hard drive and replaced it with the corrupt one. I tried to gain access to the data using an external caddy, however the hard drive did not appear in finder and I could not mount it in utilities.
    Is there any possible way I can recover my files, preferably not through some company which wants thousands of $$$.

    hi friend,
    No need to worry. There are many cases due to which hard drive crashes and not works. Don't worry! The data is not lost forever; it is only invisible from your computer. You might be thinking that the disk will overwrite the space of the deleted data with some other data. Running a wrong data recovery software application might corrupt your data and there are chances of losing them forever. By using a good hard drive recovery tool you can recover all your lost data from corrupted hard drive, crashed hard drives.You can easily download the free trial version of the software.

  • Power Mac G4 MDD data recovery ftom corrupted hard drive

    After my previous post on 4/7, my mac started new symptoms. When I press the power button, the mac starts up with the familiar chime showing the Apple Logo. The daisy spins and spins for a long time, and then the screen goes black and it sounds the chime again and repeats the same thing. It seems the hard drive can't be found. I'm thinking of replacing the hard drive hoping this will solve the problem.
    Regretably I don't have a backup copy of recent photos. Is there anyway I can recover data from this diseased hard drive? Can commercial disk repair softwares normaly do this? Has anyone successfully recovered data this way? Any suggestion? Please let me know.

    Your hard drive may have hardware and/or electronic problems or it may have a corrupted directory. Can you hear it spinning? If it has a malfunctioning component, software solutions won't be able to repair it. Professional data recovery is an option for dead hard drives, but it's very expensive. If the drive has a badly corrupted directory, a utility like Alsoft's "DiskWarrior" would be worth a try. Prosoft's utility "DataRescue" may also be worth checking out.

  • System recovery failed new hard drive

    I have an HP Pavilion g-6 1d26dx laptop.  I just replaced the hard drive with one ordered directly from HP.  When I went through the System Recovery, using the disks from HP, I got the following message:
    There might be unexpected reboot during specialize to BBV1
    The process will cause CTO panic because the image might not be normal
    I got this message after trying the system recovery with and without the supplement disc for Application and Driver Recovery DVD that came with my other disks.
    I have no idea what that message means, but I would appreciate any help getting this resolved.  I was operating on Windows 7.
    Thank you!

    Hi:
    I hate recovery disks. Too many times they don't work and you are left high and dry.
    It has happened to me twice on different PC's.
    Try the cyberlink patch for the recovery disks you purchased which may fix the issue.
    Description
    CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en
    If that fails to work, then the only other suggestion I have for you to get the operating system installed is the following and it is only good if you can still read all 25 characters of the W7 product key on the bottom of your notebook.
    If you can read the 25 character Microsoft Windows 7 product key and can live with the bare operating system and software/drivers found on your PC's support page, you can make a plain W7 installation media by reading the info below.
    Use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link  below. You need a DVD or a 4 GB flash drive to use the USB method of compilation.
    Use the 25 character windows 7 product key to activate your installation.
    http://download.cnet.com/Windows-7-USB-DVD-Downloa​d-Tool/3000-18513_4-10972600.html
    Then go to the PC's support and driver page to install the drivers you need.
    Link to the W7 ISO file downloads is below. Download the applicable version of Windows 7 that is on your product key (Home Premium, Pro, or Ultimate).
    http://forums.mydigitallife.info/threads/14709-Win​dows-7-Digital-River-direct-links-Multiple-Languag​...

  • System Recovery on New Hard Drive Not Proceeding

    Scenario: I've installed a new (blank) hard drive on my 2008 HP Pavilion dv3500. I need to install the factory image on this new drive in the original HP machine.
    1. I am booting from the recovery disks I made (F9 from system startup menu) 
    2. The first disk loads some files after which Recovery Manager opens up.
    3. Without giving me any option other than to shut down, the Recovery Manager Wizard tells me:
    "Recovery data is missing. Please use recovery media to restore the system."
    Well, that's what I'm doing! - so why can't I click next have have the recovery manager install the factory image from the recovery disks I made?
    4. Clicking "Finish" on wizard restarts the system
    5. hitting ESC goes into Startup Menu again
    6. F11 - System Recovery:
    "BOOTMGR is missing
    Press Ctrl+Alt+Del to restart"
    7. I've read all the documentation I can find. Looks like HP strongly prefers the use of the partitioned recovery drive on the original hard drive. Can't seem to find any information on how to recover using the recovery disks without Recovery Manager trying to access the recovery partition on the old drive -- which is not my scenario.
    Summary: neither booting from recovery disk nor directly calling "System Recover" with F11 initiate the system recovery process from the recovery disks when a new drive replaced the older, smaller one.
    Anyone see a step I'm missing here?

    Try booting with a utilty cd to delete any partitions, create 1 partition & format hdd. I have had good results with the free Partition Wizard .Download the Bootable CD iso here .Get ImgBurn here to burn the image to cd.
    After all operations are done with PW, boot from the Recovery Disks and try again.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for