Aia_wss_saml_or_username_token_service_policy_OPT_ON In Provider

Hi All,
I have created a normal jca adapter for the provider - and it accepts an abm, tranfroms it and inserts into a table. When I look at the wsdl of the adapter from the EM, sometimes I see the following policy defined and attached to it. Also, only some of the provider wsdls have this policy attached. Due to this policy when i test the adapter - I have to enter the username and password. I suspect that this is causing some issues down the lane. Can someone tell me why this policy gets attached, and why does it happen only sometimes.
- <wsp:Policy xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy" orawsp:provides="{http://docs.oasis-open.org/ns/opencsa/sca/200903}authentication, {http://docs.oasis-open.org/ns/opencsa/sca/200903}clientAuthentication, {http://docs.oasis-open.org/ns/opencsa/sca/200903}clientAuthentication.message" xmlns="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="aia_wss_saml_or_username_token_service_policy_OPT_ON" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <wsp:ExactlyOne>
- <wsp:All>
- <sp:SupportingTokens xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
- <wsp:Policy>
- <sp:SamlToken sp:IncludeToken="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/AlwaysToRecipient">
- <wsp:Policy>
<sp:WssSamlV11Token10 />
</wsp:Policy>
</sp:SamlToken>
</wsp:Policy>
</sp:SupportingTokens>
</wsp:All>
- <wsp:All>
- <sp:SupportingTokens xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
- <wsp:Policy>
- <sp:UsernameToken sp:IncludeToken="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/AlwaysToRecipient">
- <wsp:Policy>
<sp:WssUsernameToken10 />
</wsp:Policy>
</sp:UsernameToken>
</wsp:Policy>
</sp:SupportingTokens>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
This the Tech stack.
AIA 11.1.1.5.0
SOA 11.1.1.5.0
jDeveloper 11.1.1.5.0
Thanks
Anish.

I found the issue. The policy gets added only if I have Adapter in the composite name.
Found the answer from one Gerhard's older posts Re: No Authentication Policy for ABCS composites

Similar Messages

Multi provider

Hi Experts.
I have one DSO and one CUBE.only two fields are common in the both DSO and CUBE.now my requirement is i need all the fields from the DSO and some fields from the cube( which fields are not common). what is the best one to use multi provider or Info set.
If we can achive through Info set how to do it.
regards..roi
Edited by: samuroi on Apr 13, 2010 2:17 PM

Hi
Check these links:
http://www.scribd.com/doc/6446225/BI-Data-Modeling-Multi-Providers-and-InfoSets
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
http://www.sap-img.com/business/steps-for-creating-multi-provider.htm
Regards
Chandra Sekhar T

How to provide text formatting options to user from a text field

Hi,
My requirement is - in the interactive form, a comments field needs to be provided where user should be able to enter text with formatting options like
Headers
indentations
bold/italic
bullet points and numbers
Once user enters the formatted texts in a text field, data needs to be displayed/printed in the same format. Could you help me on how to provide these formatting options to the user for a particular text field?
I understand that once I define the text field with format XHTML (with RTF), user formatting can be captured and displayed in the same way. But I am not sure on how to provide the formatting options for the text field.
Thank you,
Madhu

Hi,
if you select a text field for Rich Text and the press Ctrl + E you'll get a bar for all available text formatting options in Acrobat/Reader.

Hello I am experiencing some problems for my iMessage and FaceTime. I did the steps the Apple provided online and I still can't get it to work. My updates are up to date. Everything is working fine it's just that the Apple iMessage won't except anyth

hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage

Did you try everything here?
iOS: Troubleshooting Messages
Using FaceTime and iMessage behind a firewall
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues
In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried

I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt

How can I use more than one Data Provider in my web Apps

I am trying to use two different data provider in my web apps to run two different queries from the same table ,the data provider A is working correctly but when I attempt to run data provider B ,It display an error page ,here is the error message : Exception Details :javax.servlet.ServletEx ception
java.lang.RuntimeException: java.sql.SQLException : Cannot connect .Both dataSourceName and url properties are null.

Hi,
You can use more than one data provider in your application. However if you have defined a dataprovider for a particular table already, and wish to bind a component, select the component and use its context menu to Bind to Data...

Error while generating Data provider

We are facing a weird issue while using Design Studio 1.2. Locally the tool works fine but when we use it from BI-Launchpad or through BI Enterprise it gives intermittent error "Error while generating Data Provider"
Same setup works fine in our Validation Environment.
We have tried running repair for Design Studio, redeploy the war files, creating new view but issue still exist.
We have BI 4.0 SP7 installed on Windows 2008 R2 system.
4 CMS running in cluster, Design Studio 1.2 is installed on 3 Nodes out of 4.
For now we are using 1 tomcat to access the system to narrow down the issue.
Experts please help us to resolve this issue.
Attach is the error message we are receiving

I am not clear what your data source is, but I recommend checking the PAM https://websmp102.sap-ag.de/~sapidb/011000358700001013822013E because there are some limitations with Design Studio and BI4.0

Airport Extreme no longer recognizes or provides internet to wired devices

Not sure if it was the power outage or an update that is the problem; but, I had a 5th generation Airport Extreme as the center of my home network with a solid connection to the internet for both my wired and wireless components. A few days ago, after a power flicker (all components on surge protectors) my wireless internet would not stay connected more than 45 seconds before dropping and oddly, none of my wired components we showing up on the network or getting an internet signal from the AEBS. After two hours with my ISP technical support personnel we deduced that the problem was the AEBS and the modem was fine. I bought a new AEBS yesterday (the new long cube one) to use until my appointment to have the 5th gen looked at. Plugged that in and instantly my wireless network came back up - rock solid. However, anything I connect directly to the AEBS via ethernet does not get an internet connection or show up in the network. I searched for two days in these forums for a similar problem - but, have gotten nowhere. I used my wired connections for internet phone service and really need to get this fixed soonest. Much thanks for any help anyone can throw my way.

I would find it odd that you would have a replacement AirPort and still not have Ethernet connectivity ... but, of course, anything is possible. The DHCP service on the AirPort provides IP addresses to both wired and wireless clients by default so it shouldn't work for either if there was something amiss with it.
At this point, I would suggest that you try the following:
Perform a "factory default" reset on the AirPort. After it resets it will default to its "out-of-the-box" configuration which is a wireless Internet router that will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN.
Without making any changes to the AirPort, try connecting any of your wired devices to it. If it still does not get the proper IP address and network connectivity I would suggest that you try performing a complete power recycle of your networking hardware. Please check out the following AirPort User Tip for details.

The specified store provider cannot be found in the configuration, or is...

Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
All,
I have a solution developed in Visual Studio 2012 targetting .Net 4.0. Simplified: Startup project is a WPF library and supporting this library is another project that uses Entity Framework to retrieve data. I have copied the connection strings from my EF project to my startup project, and everything seems to work fine on the development machine.
However, as sson as this project is run on a user's desktop they get the error:
System.ArgumentException
The specified store provider cannot be found in the configuration, or is not valid.
Stack trace (transcribed from screenshot, so there might be typos):
at.system.Data.EntityClient.EntityConnection.GetFactory(String providerString)
at System.Data.EntityClient.EntityConnection.ChangeConnectionString(String newConnectionString)
at System.Data.EntityClient.EntityConnection..ctor(String connectionString)
at System.Data.Entity.Internal.LazyInternalConnection.InitializeFromConnectionStringSetting(ConnectionStringSettings appConfigConnection)
at System.Data.Entity.Internal.,LazyInternalConnection.TryInitializeFromAppConfig(String name, AppConfig config)
at System.Data.Entity.Internal.LazyInternalConnection.Initialize()
at System.Data.Entity.Internal.LazyInternalConnection.CreateObjectContextFromConnectionModel()
at System.Data.Entity.Internal.LazyInternalContext.InitializeContext()
at System.Data.Entity.Internal.InternalContext.GetEntitySetAndBaseTypeForType(Type entityType)
at System.Data.Entity.Internal.Linq.InternalSet` 1.Initialize()
at System.Data.Entity.Internal.Linq.InternalSet` 1.get_InternalContext()
at System.Data.Entiy.Infrastructure.DbQuery` 1.System.Linq.IQueryable.get_Provider()
at System.Linq.Queryable.Where[TSource](IQueryable` 1 source, Expression` 1 predicate)
at MyEntityNameSpace.MyEntitySet.LoadData()
I've already verified that Oracle.DataAccess is referenced in my EF project, and I'm including oci.dll, orannzsbb11.dll, oraociei11.dll, and OraOps11w.dll in my main library (fat installation).
This configuration worked when using the older ADO.Net DataSets, but now I want to use EF 4.4 (DataBase first/model first/whatever it's not Code First) because it's just easier to code against. So obviously I'm missing something when it comes to deploying my solution. Any ideas?
Note that this is a desktop application using MS OneClick.

Same issue:
The specified store provider cannot be found in the configuration, or is not valid. ---> System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
You mention "Sounds like the client system doesn't have an Oracle client installed."
I am using Win Server 2008 R2. I have installed what i think is the right client. How do i tell?
What is the right client? Where do i get it?

Providing DRC solution for ATMs in the enterprise network

Hi all,
I am looking for ideas on how to provide a Disaster Recovery solution for thousands of ATMs (Automated Teller Machine) deployed in the bank enterprise network. The solution should consider
the following facts:-
1.- Having the ATMs switch the connection to the Server at DRC shouldn't be automatic. This situation might last for the next few years until DRC becomes mirror image of primary data center.
2.- The ATM servers at the primary and disaster recovery center is single server equipped with high availability (Tandem). I mean to say, there is no SLBs invloved in the connection
3.- The application running on the ATMs is calling the ATM Server by hardcoded IP address in the application. The bank is willing to visit the ATMs to change once and forever.
I see source natting as the most appropriate solution, however your opanion and expertise are appreciated.
Thanks
Sami

Sami,
what kind of solution are you looking for ?
Is the concern the connection from ATM to central location ?
Or is it a concern about the server at the central location ?
For connection issues, I don't see any other solution than providing multiple lines.
If the concern is the single server, you could have a loadbalancer somewhere in your network.
The loadbalancer can use probes to check the health of the server.
If the primary fails, or is unreachable, you can automatically redirect the traffic to the standby.
ATM machines will point to the virtual ip (you could reuse the current ip and assign a new one to the servers).
Not sure where to place the loadbalancer without a better idea of the problem to solve and the network.
Gilles.

I need to know free login for itunes so please provide me necessary information on free procedure of free downloading apps of apple.

i need to know free login for itunes so please provide me necessary information on free procedure of free downloading apps of apple

Follow the instructions on this page when creating an account : http://support.apple.com/kb/HT2534

I want to access/sync a spreadsheet stored in /my personal/ iCloud folder from a work-provide iPad locked to a /different/ iCloud account. Possible? How?

I'm a teacher, and I've built a fairly substantial, personalized gradebook/student data spreadsheet in Numbers 3.0 for iCloud on my personal ca. 2011 MBP. Every evening when I'm home from school, I transcribe into it my daily handwritten notes on student progress, missing homeworks, test scores, etc. It can be pretty laborious. What I'd like to do, in the interest of efficiency, is load my gradebook/spreadsheet onto a school-provided iPad, and then use it to walk around the classroom and check off homework/attendance/whatnot on the fly. The issue: all of the iPads at school are all registered to district iCloud accounts, and locked down and inaccessible to teachers. I can't save to them, and I can't access them w/o reams of red tape and administration. So what i want to know is: is there a way I can load the spreadsheet onto a school-provided iPad for on-the-go recording purposes, even if temporarily?
To clarify: I do not have access to iCloud settings on the school's iPads, and I am issued a different iPad nearly every time I wish to use one. The iPad user accounts do not "belong" to me – they are accounts shared with other teachers, etc., and I would prefer if my gradebook was not accessible to anybody who shared the equipment. I want to look at a Numbers 3.0 documents on a private iCloud account unassociated with school. What to do?

Thanks! I've turned iCloud and Photostream on and the new photos are coming through. I emailed my older photos to myself (there weren't that many) to then download to the iPad.
For future reference, do you know how to import older images into Photostream?

I would like to downgrade to the older version of the Adobe Shape App Version 1.2.0. Can I please be provided with a link in order to download the older version?

I would like to be provided with a download for the older version of adobe shape 1.2.0 please!

If you've been backing up to your local iTunes library, check your APPS pane to see if you have an older version of Shape stored locally. If you do, you can delete Shape from your phone, connect your phone to your computer, and drag the older version from your iTunes library onto your device. That's what I did to go back to the older version, which produced shapes that work much better for my purposes.
Adobe, it seems like with the newest version of Shape, you made DRASTIC changes to the way the app processes images into shapes. Is there any way for us to opt for the older version of processing? Or to toggle between the two?

Adobe Photoshop CS6 provides no engine for debugging

Hello,
I've been trying to diagnose a problem with my wife's copy of CS6 Web and Design premium. Basically it's unable to run any JSX script that requires the Debug engine. I receive the error message 'Adobe Photoshop CS6 provides no engine for debugging' - trying it on Illustrator also gives a similar error. Persisting by clicking the 'play' button brings up a popup error message that says 'Unable to Run Script' or something similar.
Note that if I hack our JSX script to bypass the debug engine it works fine - except certain PSDs will cause CS6 (and my older copy of CS4) to crash, so this is only a stopgap measure. Disabling OpenGL on CS4 seems to prevent crashing but it's not an option on the wife's copy since she's a full-time artist and I'm not.
This is what I've had to change -
$.level = 2; // debug level: 0-2 (0:disable, 1:break on error, 2:break at beginning)
debugger; // launch debugger on next line
Changing the $.level = 0 lets me continue without issue.
This problem does NOT exist on my laptop using the same installer downloaded from Adobe.com. (I use trial version for testing, she uses her serial no.)
Is it possible this problem persists because I uninstalled an old copy of Photoshop CS5 (standalone installation) AFTER installing CS6 Web & Design (multiple programs)?
I've tried uninstalling and reinstalling CS6, but the problem persists.
Please help, our jobs rely on this. >.<
Worst case scenario I'll copy the entire install folder over from my laptop to try and fix the problem but I'd rather not have to since we're currently working in different countries and I can only use Remote Assistance to help.

The problem is the SCRIPTS work - the debugging engine is what's missing for some reason. Even if there's a way to just cleanly uninstall everything so I can start from scratch without formatting the hard disk would be a good solution. (since apparently I think I missed some files somewhere on the last uninstall)

Issue in Multi Provider

Hi all,
i need to create multiprovider combining cube and ods. i created MP and when i view the data in listcube, data is populated from cube . ods data didnt populated in MP.
eventhough i mapped common chars from two infoproviders MP, data is not populated in MP.what else has to be done to get data from ods and also how to pull data for time chars in the ODS.b'cos there is data for time char in cube and not in ods. is it that key figure is mandatory for mapping from both infoproviders in MP.
please provide answers for my query.
thanks

If you do not have a KF in ODS...what are you seeing in the listcube for MP????
If there are common KFs in ODS and Cube then in MP..go to Key Figure tab...click identification and then select if you need from both or from the one of the InfoProviders...
Also check your mapping and do listcube as per your mapping..that for the common characteristics...
Regards
Gajendra

Aia_wss_saml_or_username_token_service_policy_OPT_ON In Provider

Similar Messages

Maybe you are looking for