Air app in Flash Builder w/ lastest OSMF 1.6 s5

I am trying to build and air app with an osmf player in it. I need to use the lastest version. The challenge is the newest version requires the use of flex sdk 4.5 which doesn't compile to Air. I did find some instrustion on how to use inplement and use the new Air sdk 2.6 to allow flex to compile Air with the 4.5 sdk but it doesn't seem to work for me. Has anyone else had to install the Air 2.6 sdk for this reason? If so could you share how you got it to work?
I was attempting it with the following instrunction. http://blogs.adobe.com/cantrell/archives/2011/03/how-to-use-air-2-6-with-flash-builder-4.h tml

I used that : http://learn.adobe.com/wiki/display/airquestions/AIR+for+TV?focusedCommentId=79464085&#com ment-79464085
and it worked.
it forces you to downgrade to Flex 4.1 SDK though.

Similar Messages

Adl quits unexpectedly - while debugging AIR app in Flash Builder 4.5

the crash scenario:
     - i'm debugging an AIR app, things are running fine
     - my app is a media rotator and i've set it up to load in images, videos, sounds, and swfs (all good no problems there)
     - the original was built for AIR 2.6 and used the old halo components
      - however, now that i've done the conversions, targeted all spark and mx, and also setup my new AIR 3 SDK (following these instructions http://jeffwinder.blogspot.com/2011/09/installing-adobe-air-3-sdk-in-flash.html)
       when I go from loading a BitmapImage to loading a VideoDisplay element, the adl debugger simply crashes w/ 'adl quit unexpectedly' msg and a massive crash report.
     - it never did this in AIR 2.6 and Flex 4.0 SDK
     - i can load videos in sequence no problem, but the error only occurs when going from bitmap to video.
Any ideas? It's frustrating because after the crash there's not even an error message in the Console.
Also, is this really the best practice Adobe approved way of targeting AIR 3?
http://jeffwinder.blogspot.com/2011/09/installing-adobe-air-3-sdk-in-flash.html
Mike Delucchi

For example in the runtimes\player\win folder I would suggest downloading and renaming...
1. http://fpdownload.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_ax_debug_32bit .exe ===> FlashPlayerDebugger.exe
2. http://fpdownload.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_plugin_debug_3 2bit.exe ===> InstallPlugin.exe
3. http://fpdownload.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_ax_debug_32bit .exe   ===> InstallAX.exe

Developing Iphone App using Flash Builder and Flex Air Mobile

I started developing an Iphone app using the trial version of Flash Builder and was pretty impressed with how easy it was, then i hit problems:
Trying to submit my app, I was getting invalid binary, using google i tracked this down to a change in the Apple App Store meaning that all apps needed to have native iphone 5 support, which meant updating to Air SDK 3.7
Updating to AIR SDK 3.7 was a nightmare (mainly as a result of my failure to read the small print)
Once I got SDK 3.7 to work with flash builder / flex mobile i though i was there.
However now i can produce a fast build but everytime i try and produce a standard / production build i get strange errors (air 3.8 does the same).
My Question is - before i actually buy Flash Builder has anybody actually achieved the following:
     Building an Iphone App using:
     Flash Builder 4.7    (running on OSX)
     Flex Mobile 4.6
     Air 3.7
If so how ?
cheers
Toby

Thanks for your reply, its nice to know its not just me.
the error i got when submitting to the App store where due to native support for IPHONE 5 which is now mandatory (from May 1st), looking around the internet the common soloution seemed to be upgrading to Air 3.7.
The strange erorrs on 3.7 revolve around compiling a standard / production build (fast build works fine)
the error is always the same (snippet shown below):
Error occurred while packaging the application:
Undefined symbols for architecture armv7:
"__ZN7avmplus8Debugger9debugLineEi", referenced from:
      __ZN7avmplus9MethodEnv9debugExitEPNS_13CallStackNodeE in AOTBuildOutput-4.o
      __ZN7avmplus11BaseExecMgr22debugEnterExitWrapperNEPNS_9MethodEnvEiPj in AOTBuildOutput-4.o
I have completly failed to work out why, but my gut feeling is its something to do with how the mac is compiling the code in standard build and unable to find a library it needs.
cheers
Toby

Trace not working when create air app in flash cs6

hi
when i compile air app in flash cs6 , trace function dont workk and flash cs6 dispatch error with this title: test movie lunch failed, please help me

yeah, that happened to me, is not a compilation error is a popup that says "test lunch movie failed". I usually happened when the machine is saturated memory, and does not work well until after restart

Problems with Dashboard Demo App in Flash Builder 4

I imported the Adobe Flex Dashboard app into Flash Builder 4 using SD 4.1 and selected "Use Flex 3 compatibility mode", but there are still some issues after import.
I'm not talking about having to create the "libs" folder and re-generate the HTML templates. I know why that needs to be done. I'm also not talking about the IStroke and IFill errors you get for the number of arguments to the apply() and begin() methods, as those interfaces changed in Flex 3.5.
But when I get the app launched, the chart datatips are just a black rectangle (no text) and the combobox entry text is invisible.
I'm going to try and fix these, but I thought selecting "Use Flex 3 compatibility mode" meant no changed required?

Here is a simple example. Create a new project in Flash Builder 4 and in the project properties compiler section, select "Use Flex 3 compatibility mode". Then launch the app, hover over a column in the chart and you see black rectangles, not data tips. Why is this and how to fix?
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="srv.send()"
height="600">
<mx:HTTPService id="srv"
    url="http://aspexamples.adobe.com/chart_examples/expenses-xml.aspx"/>
<mx:ComboBox dataProvider="{srv.lastResult.data.result}" labelField="month"/>
<mx:Panel title="Column Chart">
    <mx:ColumnChart id="myChart" showDataTips="true"
      dataProvider="{srv.lastResult.data.result}">
      <mx:horizontalAxis>
        <mx:CategoryAxis categoryField="month"/>
      </mx:horizontalAxis>
      <mx:series>
        <mx:ColumnSeries xField="month" yField="profit"
          displayName="Profit"/>
        <mx:ColumnSeries xField="month" yField="expenses"
          displayName="Expenses"/>
      </mx:series>
    </mx:ColumnChart>
    <mx:Legend dataProvider="{myChart}"/>
</mx:Panel>
</mx:Application>

Overlaying adobe air sdk in flash builder 4.6

After overlaying adobe air sdk in flash builder 4.6 i am getting this error in my flex mobile project "Could not resolve <s:ViewNavigatorApplication> to a component implementation.". I have followed the steps mentioned on this link "http://rubberduckygames.com/how-to-overlay-abode-air-sdk-over-flex-sdk/". Can anyone please suggest me what i need to do in order to get this work.

Finally Figure it out..
geo = new Geolocation();
geo.addEventListener(GeolocationEvent.UPDATE, onLocationUpdate);
has to be executed before checking if it is muted.
geo.addEventListener(GeolocationEvent.UPDATE, onLocationUpdate);
Is what requests permissions from the phone to use the gps.
Hope this saves someone alot of time.
Tested With Flex 4.9.0 Air 3.8 Beta.

Built app with Flash Builder 4.6 and compiled for iOS, now error when loading to appstore

I built a fairly simple app using Flash Builder 4.6 and have successfully deployed it to the Android Market (after testing on my own Android device). I have also taken that same app and compiled it for iOS and tested it on my own iPad.
I have then done the release build with the "Final Release for App Store Distribution" option in the release build wizard. I have all the correct provisioning certificates in place and compiled the application to a .ipa file.
At this point, using a MAC, I have run the Application Loader utility to upload my application to the itunesConnect portal to get it in the appstore. I've already gone through the steps of entering the metadata, price scheme, and screenshots in the itunes connect portal, and just need to upload it for review.
When I upload the .ipa file into the application loader, it gives me the following error:
"iPhone/iPod Touch: application executable contains unsupported architecture(s): arm"
Anyone have any idea what this means and how I can fix it? Any help is greatly appreciated!
Thanks in advance!

Solved it. Just added the following in the <InfoAdditions> tag for iPhone in my app descriptor XML file:
<key>UIRequiredDeviceCapabilities</key>
<array>
<string>wifi</string>
<string>armv6</string>
<string>armv7</string>
</array>

Don't understand about portable apps in Flash Builder 4.7

Greetings,
I am a long time user of Flash Builder. I write *.mxml and *.as files. They get compiled to *.swf files that run in a Flash Player. This has been the most powerful and portable development system for the Web up until Jobs killed it. In response, Adobe has changed focus. According to the hype, Adobe has made Flash Builder do something more to address iOS, mobile, et al. The problem is that, for the life of me, I can't get past all the marketing BS to understand what Flash Builder now does (to address iOS, HTML5, etc.). Can someone please explain to me what Flash Builder now does besides generate swf files from *.as and *.mxml files in programmer speak without the hype? Now, as I too, am forced to look for a different portable solution, I'd like to at least understand what Adobe is talking about.
Thanks!

Android devices have an Adobe AIR install so the .swf files are interpreted like normal.
For iOS - Adobe actually compiles into native code and runs like any other app would. The downside to this is you can't load .swf files that have timeline code or linkage in the library because those have not been compiled into native code and there is no interpreter to run the commands.

Incorrect ADT version when compiling using updated AIR SDK in Flash Builder

I was wondering if anyone else has come across adt version issues when compiling with Flash Builder.
I just downloaded Flash Builder 4.7 (I had 4.6 installed previously). I upgraded due to AIR SDK issues when trying to send my app to iOS. I downloaded AIR 3.7 SDK and done the whole "overlay" described here http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html but when trying to compile it Flash Builder, it states that version 3.7 is not only up to 3.1 I did a check of the adt that is being used (adt -version) and it returns back that it is version 3.1 This is the one contained within the sdks/4.6.0/lib folder. If I copy the one from the AIRSDK folder and check the version on that 3.7 comes up correctly, but it needs files that are contained in the AIRSDK folder, so I'll need to copy more than just the adt.jar file.
Really I'm just trying to see if anyone knows what I can change in Flash Builder to point to the AIRSDK folder instead of the sdks/4.6.0/lib folder so I'm not constantly updating my adt.jar file each time I install a new AIR SDK.

OK, not the best solution (hopefully someone will be able to tell me where to update Flash Builder to point to the AIRSDK directory instead of {FB install dir}/sdks/4.6.0/lib, but until then, here's a work around.
First make sure to backup your old aot and android directories in your {FB install dir}/sdks/4.6.0/lib and your original adt file (I just renamed them to fileOrDir_original)
Then copy your adt.jar file, aot dir, android dir, and I copied legacy dir also to your {FB install dir}/sdks/4.6.0/lib
You should now be able to compile using the 3.7 AIR SDK. There's another fix for PIE in AIR 3.8, so I may be updating again soon to the labs build. I'm hesitant to copy any more files over in case it stops my non-mobile AIR builds from working, but hopefully this will be good enough for mobile builds and for anyone else having this issue in Flash Builder.

How to update the AIR included in Flash Builder SDK?

So, the Flash Builder SDK comes with a version of AIR, which it uses when you package a mobile app for iOS (Android mobile apps are run with the AIR that's downloaded from the Marketplace)... On my Windows machine, this "built-in" copy of AIR is located in "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\runtimes\" unless I'm mistaken.
I'm pretty sure that it does not automatically update itself -- and I'm equally certain that it's a pretty old version of AIR, because it's the one that was included with the 4.6 SDK which was released 8 months ago...
So how do I update this version of AIR that's built into the Flash Builder SDK?
Thanks,
Laurence MacNeill
Mableton, Georgia, USA

Oops -- never mind... Didn't realize there was a separate AIR SDK that you could download -- I thought it was integrated into the Flex SDK, and since there hasn't been a new Flex SDK since 4.6, I thought I had to somehow grab pieces and parts of AIR to update this manually...
But grabbing the AIR SDK from http://www.adobe.com/devnet/air/air-sdk-download.html did the trick... Just unzipped that into the sdks\4.6.0 folder and was done... Sweet...
L.

Webcam and Whiteboard not working with Adobe AIR with Adobe Flash Builder

Hi,
I am trying to build a simple chat service using Adobe Flash Builder target for desktop AIR( my final objective is to port it to android). My adobe AIR version is 2.5.0 and below is my source code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:rtc="http://ns.adobe.com/rtc">
<fx:Declarations>

<rtc:AdobeHSAuthenticator id="auth" userName="Yy" protocol="rtmfp"/>
</fx:Declarations>
<rtc:ConnectSessionContainer id="session" authenticator="{auth}" roomURL="https://collaboration.adobelivecycle.com/yytan1987/myfirstroom" width="100%" height="100%">
<mx:HBox width="100%" height="100%">
<mx:VBox width="25%" height="100%">
<rtc:WebCamera width="100%" height="50%"/>
<rtc:SimpleChat width="100%" height="50%"/>
</mx:VBox>
<rtc:SharedWhiteBoard width="75%" height="100%"/>
</mx:HBox>
</rtc:ConnectSessionContainer>
</s:WindowedApplication>
Basically when i debug it with AIR, the chat is working properly but the webcam and whiteboard just don't work....I really don't know what's wrong with it already...Appreciate it if anyone can help,thanks!!
Regards

Hi,
My take is , is your autopromote tuned on for the room. I mean whats
your user role when an user enters the room(who is not host), is it 10
or 50. If its 10 i.e. viewer , then he cant use his own cam etc. You
need to take a look at the logs when an user enters and if its 10 and
you want to give him these permissions, turn autopromote on from the
devconsole for the room to make his role 50 i.e. publisher.
I just now downloaded 2.5.1 AIR and created a new project with your
source and I am able to use everything.
Thanks
Hironmay Basu

Apache Flex 4.9 + Adobe Air 3.6 + Flash Builder 4.6

The new Flex and Air versions are released.
Is it possible to combine them and import the Flex + Air sdk combination on Flash Builder 4.6?

Where are these releases available to view, details etc. ??? could you give some more details e.g. Link. regards aktell2007

AIR 14 and Flash Builder 4.7!!!

I cant seem to find any documentation on this anywhere so I think I will have to just hit Adobe up directly
I am running Flash Builder 4.7 on a MAC running Mavericks ( OSX 10.9.3 ).
Do I have to update both this folder (Referring to this as Folder 1):
Applications/Adobe Flash Builder 4.6/sdks/
and this folder (Referring to this as Folder 2):
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722st
Or can you just update the second folder? I updated the 2nd folder by pasting the contents extracted from the zip I downloaded from this page:
Download Adobe AIR SDK
Before updated Folder 2, i was getting a compile error I think it was because of the java 1.6 error. But since updating Folder 2 to the AIR14 SDK that issue was fixed.
I will say I didnt do the whole Terminal Extract method. But things started compiling just fine.
I am using some native extensions for a mobile project and now I am back to getting compile errors. The Null point java errors or whatever. I am wondering is it because:
I need to update the SDK in Folder 1?
Or is it because I didnt extract files using the terminal into Folder 2?
Or do you need to do both??
Lastly can you provide more documentation and possibly an in depth explanation of the entire process?????

You need to contact Adobe support thru chat and ask them to reset your activations
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Build iOS app with Flash Builder Burrito.

I have some Android apps built with Flash Builder Burrito that I want to deploy on iOS.
Can it work?
How?
Is the folowing working ? StageOrientationEvent and StageWebView Class
Best regards,
mark

Solved it. Just added the following in the <InfoAdditions> tag for iPhone in my app descriptor XML file:
<key>UIRequiredDeviceCapabilities</key>
<array>
<string>wifi</string>
<string>armv6</string>
<string>armv7</string>
</array>

Adobe AIR.dll_unloaded When Flash Builder 4.6 closed.

I found nothing about Adobe AIR.dll_unloaded by Google.

I've been seeing what sounds like a similar problem (Windows application "BEX" error when attempting to close Flash Builder via its [X] icon).
(Win 7 Enterprise, SP1, 64-bit, i5 + 8GB RAM), Flash Builder 4.6, Java 1.7.0_07)
I tried the following:
-- Launching Tour de Flex (from the task bar icon), and then updating AIR to the latest version
-- Right-clicking on the Flash Builder task bar icon and then selecting "Run as Administrator"
-- Right-clicking on the Flash Builder task bar icon and then selecting "Troubleshoot compatability", then applying the compatability fixes it suggested.
Somewhere along the way, the problem went away. I then ran the compatability troubleshooter again and (I think) removed the compatability changes (since windows security was asking me whether I want to let the application update my computer every time I launched FlashBuilder--annoying!).
The problem still appears to be fixed--but only with a whole ten minutes testing. I'll just have to see if the above is really a fix/work-around.

Air app in Flash Builder w/ lastest OSMF 1.6 s5

Similar Messages

Maybe you are looking for