AIR application object - mouse drag problem
Hi,
We face the following problem. Attached herewith are code sample and simulation for the problem. Would be great if someone could help us.
Problem: Objects created in AIR application experience mouse drag problem.
To simulate the problem please execute the sample application, a grey box (object) appears on the screen. Hold down left and right mouse buttons and drag the object and release both the mouse buttons. Object sticks to mouse pointer and moves along with mouse pointer to wherever it is dragged.
Steps to Reproduce - Hold down left and right mouse buttons and drag the object and later release both the mouse buttons. Notice Object sticks to mouse pointer and moves along with mouse pointer to wherever it is dragged. Object stops to move along with mouse pointer after sometime, then move the mouse pointer to the object and see that it sticks to pointer again and gets dragged along with the pointer.
Actual Result - Object sticks to mouse pointer and moves along with mouse pointer to wherever it is dragged.
Expected Result - Object should not stick to mouse pointer even after the mouse buttons are released.
Due to problems with uploading the attachment here, please send a email to the following email-id ([email protected]) and I shall send the attachment in response.
Thanks in advance.
After some research, it seems this problem has been there for years with Bootcamp. Hope Apple can develop a better touchpad driver soon.
Similar Messages
-
Communication problem between air application from swf at browser
Hi,
I am trying to communicate adobe air native application from brwser using swf, I check for native application installed or not. If installed then launch and if not then install and launch.
I am facing problem when browser crashes and communication get lost with adobe air native application. And when user restart web browser and try to make local connection for communication with native application, some times it get failed. so, how to handle this state please help.
Thanks
Nitesh KumarHi sinious,
How could I clean up connection when browser is aborted or lost?
below you can find the code snippet to check for air application and connection
airSWFLoader = new Loader();
loaderContext = new LoaderContext();
loaderContext.applicationDomain = ApplicationDomain.currentDomain;
airSWFLoader.contentLoaderInfo.addEventListener(Event.INIT, onInit);
airSWFLoader.load(new URLRequest("http://airdownload.adobe.com/air/browserapi/air.swf"),loaderContext);
function onInit(e:Event):void
airSWF = e.target.content;
switch(airSWF.getStatus().toString())
case "available" : AirLoaderStatus = 1;
break;
case "unavailable" : AirLoaderStatus = 2;
break;
case "installed" : AirLoaderStatus = 3;
break;
private function getAppStatus():void
clearInterval(intervalIdentifier);
if(AirLoaderStatus == 0){intervalIdentifier = setInterval(getAppStatus,1000);return;}
m_launchInstallBtn.visible = true;
var statusInfo:String = airSWF.getStatus();
airSWF.getApplicationVersion(m_installerFileName, m_pubID, versionDetectCallback);
function versionDetectCallback(version:String):void
if (version == null)
trace("Not Installed");
// Take appropriate actions. For instance, present the user with
// an option to install the application.
else
m_isPluginsInstalled = true;
// Take appropriate actions. For instance, enable the
// user interface to launch the application.
private function onlickMouse(event:MouseEvent):void
m_text.text += "\nm_isPluginsInstalled:"+m_isPluginsInstalled+":::AirLoaderStatus:"+AirLoaderStatus;
trace("\nm_isPluginsInstalled:"+m_isPluginsInstalled+":::AirLoaderStatus:" +AirLoaderStatus);
switch(event.currentTarget)
case m_launchInstallBtn:
if(AirLoaderStatus == 1)
installAirsetup();
else
if(!m_isPluginsInstalled)
airSWF.installApplication(m_url, m_runtimeVersion, m_argsToPass);
airSWF.launchApplication(m_installerFileName, m_pubID, m_argsToPass);
else
airSWF.launchApplication(m_installerFileName, m_pubID, m_argsToPass);
break;
in the above code snippet I pass localConnection for send and recieve as an argument in m_argsToPass.
the connection names strarts with "_".
In the air application I I split the event arguments like given below
argsArray = event.arguments.toString().split(",");
and then try to establish connection.
Please suggest, how could I clean the connection on lost/ abort of browser, since then swf object embeded in browser also get lost. -
Title
Incorrect functionality of embed tag in html loader for adobe air development
Description
Problem Description: If we had loaded youtube.com video url in a view stack and navigate to other index of stack or away from we UI screen within the same native window video or embeded tag of flash player or any other embed object will be displayed on top of all screens layer in same position of where the object should be placed in side of html loader only.
Steps to Reproduce:
1) go to http://get.straweb.com/StraWebBrowser/StraWebBrowser.air download and install
2) load 2 tabs and in the 3 tab load video player of youtube.com which will a sample video
before completing the load of 3 tab which trying to load video from youtube.com, navigate to other tabs 1 or 2 in few second once the flash player of youtube.com video player is load it will display in the current tab or UI screen.
3) Try navigating to other tabs than youtube.com loaded tab you see the flash player is on top it stable.
4) navigate to 3 tab and try to navigate to other tab you can observe that so how it will not show that flash player and only visible in that 3 tab which is fine.
Actual Result: Embedded tag of html page displaying on top of all layers of Adobe air application native window
Expected Result: Embedded tag of html page should only displayed in side htmlloader
This you can replicate in any adobe air plugin update and on any Hardware and Environment.
Applicable to all sdk versions of adobe air.Adobe Bugbase: Bug 3823839 Incorrect functionality of embed tag in html loader for adobe air development
-
Can't drag/copy attachments from Outlook into AIR application
I need to either drag or copy a file from an email in Outlook and then drop/paste it into my AIR application. I can do this with say Outlook and Windows Desktop no problem, but when it comes to AIR it doesn't work. The Clipboard.getData() method returns null when the "paste" event is triggered.
I might be wrong, but ...
I know Microsoft Office 2011 is Mountain Lion compatible. In fact, Microsoft released updates to it right around the time of Mountain Lion's release to assure compatibility.
I do not believe Microsoft Office 2008 is Mountain Lion compatible. -
Problem in full screen mode air application
Hi All
I am facing some problem in creating an air application. I used fullscreenmode .FULL_SCREEN_INTERACTIVE to maximize the window on load the application was succeeded in some extent. But there is one problem one bottom bar is coming just under the window. can anybody please help me. I am attaching the preview with this.
Thanks and regardsHi M*A*S*H 4077 thanks agan for your reply sending you the total code i used in my project.As I am a new coder my codes are not in abc please try to understand.please have a look and if u want to see my componentcode then also i can send code.component i only used in the video part.
thank you
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:components="components.*"
verticalAlign="top"
backgroundColor="white"
borderStyle="none"
borderThickness="0"
creationComplete="init();"
baseline="0"
paddingLeft="0" paddingRight="0" paddingTop="0" paddingBottom="0"
initialize="service.send()"
applicationComplete="fullscreenmode()"
backgroundGradientAlphas="[1.0, 1.0]"
backgroundGradientColors="[#CCCCCC, #090909]"
backgroundImage="@Embed(source='assets/background/background.jpg')"
>
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import flash.display.Sprite;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import mx.rpc.events.ResultEvent;
import mx.effects.Iris;
import mx.effects.easing.*;
import flash.utils.Timer;
[Bindable]
public var secondsTillDue:int=100;
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
public var bol:Boolean;
[Bindable]
private var images:ArrayCollection;
[Bindable]
private var centerpoint:Number;
[Bindable]
private var currentIndex : Number = 0;
public var myTimer:Timer;
[Bindable]
private var mainwidth:Number;
[Bindable]
private var mainheight:Number;
private function init():void {
myTimer=new Timer(1000);
myTimer.addEventListener(TimerEvent.TIMER,warnIfClose);
myTimer.start();
// Initialize the uldr variable which will be used to load the external
// playlist XML file.
uldr = new URLLoader();
uldr.addEventListener(Event.COMPLETE, xmlCompleteHandler);
uldr.load(new URLRequest(PLAYLIST_XML_URL));
/* function setFullScreenDisplayState():void{
stage.displayState=stageDisplayState.FULL_SCREEN_INTERACTIVE;
public function warnIfClose(event:TimerEvent):void{
secondsTillDue=secondsTillDue-1;
if(secondsTillDue==90){
lab1.setStyle("hideEffect", fade);
lab1.visible=false;
clockpan.visible=false;
clockpan.includeInLayout=false
clock1.setStyle("hideEffect", fade);
clock1.visible=false;
else if(secondsTillDue==88){
mainbox
imagePart.setStyle("showEffect",fade);
imagePart.visible=true;
imagePart.includeInLayout=false;
else if(secondsTillDue==83){
imagePart.visible=false;
imagePart.setStyle("hideEffect",fade)
videoContainer.visible=true;
playVideo();
private function fullscreenmode():void{
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
mainwidth=stage.width;
mainheight=stage.height;
centerpoint=stage.height/2;
private function serviceHandler(event:ResultEvent):void{
images = event.result.gallery.img;
var timer:Timer = new Timer(15000);
timer.addEventListener(TimerEvent.TIMER,nextImage);
timer.start();
private function nextImage(event:TimerEvent):void{
if (currentIndex < images.length - 1){
currentIndex++;
else {
currentIndex = 0;
import mx.controls.ProgressBarMode;
* The amount of time between calls to update the playhead timer, in
* milliseconds.
private const PLAYHEAD_UPDATE_INTERVAL_MS:uint = 10;
* The path to the XML file containing the video playlist.
private const PLAYLIST_XML_URL:String = "playlist.xml";
* The client object to use for the NetStream object.
private var client:Object;
* The index of the currently playing video.
[Bindable]
private var idx:uint = 0;
* A copy of the current video's metadata object.
private var meta:Object;
private var nc:NetConnection;
private var ns:NetStream;
private var playlist:XML;
private var t:Timer;
private var uldr:URLLoader;
private var vid:Video;
private var videosXML:XMLList;
* The SoundTransform object used to set the volume for the NetStream.
private var volumeTransform:SoundTransform;
* Constructor
private function initApp():void {
// Initialize the uldr variable which will be used to load the external
// playlist XML file.
uldr = new URLLoader();
uldr.addEventListener(Event.COMPLETE, xmlCompleteHandler);
uldr.load(new URLRequest(PLAYLIST_XML_URL));
* Once the XML file has loaded, parse the file contents into an XML object,
* and create an XMList for the video nodes in the XML.
private function xmlCompleteHandler(event:Event):void {
playlist = XML(event.target.data);
videosXML = playlist.video;
main();
* The main application.
private function main():void {
volumeTransform = new SoundTransform();
// Create the client object for the NetStream, and set up a callback
// handler for the onMetaData event.
client = new Object();
client.onMetaData = metadataHandler;
nc = new NetConnection();
nc.connect(null);
// Initialize the NetSteam object, add a listener for the netStatus
// event, and set the client for the NetStream.
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
ns.client = client;
// Initialize the Video object, attach the NetStram, and add the Video
// object to the display list.
vid = new Video();
vid.x = 0;
vid.y = 0;
vid.attachNetStream(ns);
videoContainer.addChild(vid);
// Begin playback of the first video.
//playVideo();
//play video code goes here
// Initialize the Timer object and set the delay to
// PLAYHEAD_UPDATE_INTERVAL_MS milliseconds.
t = new Timer(PLAYHEAD_UPDATE_INTERVAL_MS);
t.addEventListener(TimerEvent.TIMER, timerHandler);
// Configure the positionBar ProgressBar instance and set the mode to
// MANUAL. Progress bar values will be explicitly set using the
// setProgress() method.
//positionBar.mode = ProgressBarMode.MANUAL;
// Configure the volumeSlider Slider component instance. The maximum
// value is set to 1 because the volume in the SoundTransform object
// is set to a number between 0 and 1. The snapInterval and tickInterval
// properties are set to 0.1 which allows users to set the volume to
// 0, 0.1 - 0.9, 1.0 which allows users to increment or decrement the
// volume by 10%.
//volumeSlider.value = volumeTransform.volume;
//volumeSlider.minimum = 0;
//volumeSlider.maximum = 1;
//volumeSlider.snapInterval = 0.1;
//volumeSlider.tickInterval = volumeSlider.snapInterval;
// Setting the liveDragging property to true causes the Slider
// instance's change event to be dispatched whenever the slider is
// moved, rather than when the user releases the slider thumb.
//volumeSlider.liveDragging = true;
//volumeSlider.addEventListener(Event.CHANGE, volumeChangeHandler);
// Configure the various Button instances. Each Button instance uses
// the same click handler.
//playButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//pauseButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//stopButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//backButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//forwardButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
* Event listener for the volumeSlider instance. Called when the user
* changes the value of the volume slider.
private function volumeChangeHandler():void {
// Set the volumeTransform's volume property to the current value of the
// Slider and set the NetStream object's soundTransform property.
//volumeTransform.volume = volumeSlider.value;
ns.soundTransform = volumeTransform;
* Event listener for the ns object. Called when the net stream's status
* changes.
private function netStatusHandler(event:NetStatusEvent):void {
try {
switch (event.info.code) {
case "NetStream.Play.Start" :
// If the current code is Start, start the timer object.
t.start();
break;
case "NetStream.Play.StreamNotFound" :
case "NetStream.Play.Stop" :
// If the current code is Stop or StreamNotFound, stop
// the timer object and play the next video in the playlist.
t.stop();
playNextVideo();
break;
} catch (error:TypeError) {
// Ignore any errors.
* Event listener for the ns object's client property. This method is called
* when the net stream object receives metadata information for a video.
private function metadataHandler(metadataObj:Object):void {
// Store the metadata information in the meta object.
meta = metadataObj;
// Resize the Video instance on the display list with the video's width
// and height from the metadata object.
vid.width = mainwidth;
vid.height = mainheight;
// Reposition and resize the positionBar progress bar based on the
// current video's dimensions.
//positionBar.move(vid.x, vid.y + vid.height);
//positionBar.width = vid.width;
* Retrieve the current video from the playlist XML object.
private function getVideo():String {
return videosXML[idx].@url;
* Play the currently selected video.
private function playVideo():void {
var url:String = getVideo();
ns.play(url);
* Decrease the current video index and begin playback of the video.
private function playPreviousVideo():void {
if (idx > 0) {
idx--;
playVideo();
// Make sure the positionBar progress bar is visible.
//positionBar.visible = true;
* Increase the current video index and begin playback of the video.
[Bindable]
private var newTime:Number;
private function playNextVideo():void{
if (idx < (videosXML.length() - 1)) {
// If this is not the last video in the playlist increase the
// video index and play the next video.
idx++;
playVideo();
// Make sure the positionBar progress bar is visible.
//positionBar.visible = true;
} else {
// If this is the last video in the playlist increase the video
// index, clear the contents of the Video object and hide the
// positionBar progress bar. The video index is increased so that
// when the video ends, clicking the backButton will play the
// correct video.
idx++;
vid.clear();
init();
//Alert.show("video end")
//positionBar.visible = false;
private function timerHandler(event:TimerEvent):void {
try {
} catch (error:Error) {
]]>
</mx:Script>
<mx:XML id="imagesXML" source="data/images.xml" />
<mx:Zoom id="zoom" />
<mx:Fade id="fadein" duration="1000" alphaFrom="100" alphaTo="0" />
<mx:Fade id="fade" />
<mx:Rotate id="rotate"
angleFrom="-180"
angleTo="0"
easingFunction="Elastic.easeInOut"
duration="2000" />
<mx:VBox id="mainbox" horizontalAlign="left" width="100%" height="100%" verticalScrollPolicy="off" horizontalScrollPolicy="off">
<mx:Panel borderStyle="none"
borderAlpha="0"
cornerRadius= "0"
headerHeight= "0"
backgroundAlpha= "0"
borderThickness="0"
verticalAlign="middle"
top="100"
height="500"
paddingLeft="0"
paddingRight="0"
paddingBottom="0"
verticalScrollPolicy="off"
horizontalScrollPolicy="off"
horizontalAlign="center"
width="{mainwidth-100}"
id="clockpan"
>
<mx:Label text="Current Time : " fontFamily="arial" fontWeight="bold" fontSize="15" id="lab1" color="#FFFFFF"/>
<components:MyWatch formatString="DD/MM/YYYY KK:NN:SS " themeColor="#0D424C" id="clock1"/>
</mx:Panel>
<!--image part start-->
<mx:Panel horizontalAlign="left" id="imagePart" visible="false" includeInLayout="false" borderStyle="none"
borderAlpha="0"
cornerRadius= "0"
headerHeight= "0"
borderThickness="0"
verticalScrollPolicy="off"
paddingLeft="0" paddingBottom="0" paddingRight="0" paddingTop="0"
horizontalScrollPolicy="off"
backgroundAlpha= "0" width="100%" height="100%">
<mx:Image source="assets/images/{images.getItemAt(currentIndex).file}"
showBusyCursor="true" id="imagefile" width="{mainwidth}" maxHeight="{mainheight}" minHeight="{mainheight}" maxWidth="{mainwidth}" minWidth="{mainwidth}" height="{mainheight}" hideEffect="{fadein}" x="0" y="0" maintainAspectRatio="false"/>
<mx:Text text="{images.getItemAt(currentIndex).title}" styleName="title" color="#ffffff" x="0" y="30"/>
</mx:Panel>
<!--image part end-->
<!--image part start-->
<mx:Panel borderStyle="none"
borderAlpha="0"
cornerRadius= "0"
borderThickness="0"
headerHeight= "0" top="0" left="0"
backgroundAlpha= "0" verticalAlign="middle"
verticalScrollPolicy="off"
horizontalScrollPolicy="off"
x="0"
>
<mx:VideoDisplay borderStyle="none" borderThickness="0" visible="false" id="videoContainer"
maintainAspectRatio="false"
/>
</mx:Panel>
<!--image part end-->
<!--<mx:Button label="fullscreen" click="stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;"/>-->
</mx:VBox>
<mx:HTTPService id="service" url="data.xml" result="serviceHandler(event)"/>
</mx:WindowedApplication> -
[Flex 4] Can't Set Drag indicator in Air Application
I'm trying to make a simple Air app that lets the user drag an Icon from one panel into another. I want to set the drag indicator to look like the icon being dragged. But no icon is being displayed. Here is my code. I'm using flash builder 4, it shouldn't be this hard.
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
viewSourceURL="srcview/index.html">
<fx:Script>
<![CDATA[
import mx.core.DragSource;
import mx.core.IUIComponent;
import mx.events.DragEvent;
import mx.managers.DragManager;
[Embed("assets/network.jpg")]
private var network_icon:Class;
//user clicks the src, so allow drag
private function mouseDownHandle(e:MouseEvent):void {
var img:Image = e.currentTarget as Image;
var dragImg:Image = new Image();
dragImg.source = img.source;
dragImg.width = 111;
dragImg.height = 111;
var src:Image = Image(e.currentTarget);
var ds:DragSource = new DragSource();
ds.addData(src, "img");
DragManager.doDrag(e.currentTarget as IUIComponent, ds, e, dragImg);
//user moves the drag proxy onto the drop target, so allow drop
private function dragEnterHandler(e:DragEvent):void {
DragManager.acceptDragDrop(e.currentTarget as IUIComponent);
//user drops src onto target, so re-parent the src to the target
private function dragDropHandler(e:DragEvent):void {
e.currentTarget.addElement(e.dragInitiator);
]]>
</fx:Script>
<!-- SRC -->
<s:Panel title="src" width="100" minHeight="133" x="10" y="10">
<s:layout>
<s:VerticalLayout gap="10" horizontalAlign="center"
paddingTop="10" paddingBottom="10" />
</s:layout>
<mx:Image source="{network_icon}" mouseMove="{mouseDownHandle(event);}" />
</s:Panel>
<!-- TARGET -->
<s:Panel title="target" width="100" minHeight="133" x="120" y="10"
dragEnter="dragEnterHandler(event);"
dragDrop="dragDropHandler(event);">
<s:layout>
<s:VerticalLayout gap="10" horizontalAlign="center"
paddingTop="10" paddingBottom="10" />
</s:layout>
</s:Panel>
</s:WindowedApplication>Hello from France!
Same problem here...
It works in a web application but not in an Air application.
Any idea will be welcome...
L.N. -
Problem with Expose and Adobe AIR application -can't click on app in Expose
I just installed a new Adobe AIR application called TwitterLocal. The app was working fine until I accidently hit some keyboard shortcut and the application window disappeared. I figured I accidently assigned the window to some other "space," however I do not have SPACES turned on. Furthermore, when I select EXPOSE, I can now see the content of the application's window, however if I click on the app (which takes on that grey-highlight appearance when you mouse over it) the desktop returns to its normal position. I can see via the top status bar that the app is currently selected, but I cannot access the app window.
Is there any way to send an app that was "sent" to expose back to the normal desktop? I've tried rebooting and even uninstalling/reinstalling the app but it is still lost in expose.
Any thoughts on this would greatly be appreciated.Solution was to change display to lower resolution, then the Adobe AIR app TwitterLocal became visible on the standard desktop and I was able to click on and move the app window towards the left of the desktop. Once I switched the resolution back, everything was ok.
-
Help need in drag drop operation in AIR application
I would like to know if there is a way to drag and drop an attachment file from an desktop mail client application(similar to MSoutlook) into an AIR application and make it accessible to the AIR application.
I did experiments with this the drag operation and its giving AIR a File Promise List format as its file type.
But I'm not exactly sure how to make use of it once it is dropped. The examples in web explains how to manupilate File Promises list format from an AIR application to the desktop.
There is not much explainations about droping a file promise list format into an AIR app. your valuable help will be greatly appreciated.Dear all,
Is the above mentioned task feasible or not?.If not do mention any other way for implementing this functionality or close to it.
Thanks -
Problem in making air application in full screen on load
Hi all
I am new in flex developing. The problem I m facing in making a air application is that I want to make the application window in full screen view without the top toolbar.
The code i got is like:
<mx:Button label="fullscreen" click="stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;"/>it is working on click the button.
But I want this on starting the application. Without any user interface.
Thanks and RegardsExtensions require both native code and ActionScript code and are packed by the native extension compiler by Adobe to an ANE file. Check this tutorial: http://www.adobe.com/devnet/air/articles/building-ane-ios-android-pt1.html
After compiling the extension, you can put the extensionId into your <extensions> branch in the application.xml and add the .ane as an excluded library into your AS3 project. Then you can use the extension like any other external library (swc file).
It's also helpful to download and play around with extisting ANEs. There are some nice open source libraries here: https://github.com/freshplanet -
Drag and drop file into Outlook from AIR application
I am hoping to see if this would be possible with the Adobe AIR API. We currently have a desktop AIR application that clients install in order to facilitate certain operations triggered via a web application (such as opening files directly from the web).
One of the actions we are requested to support is the ability to drag and drop files from our web application directly into Outlook and have the file added as an attachment. I saw the documentation at Adobe Flash Platform * Dropping file promises and was wondering if this might be a possibility, or if there was some other method of performing this.
We are trying to get around the fact that users now have to download a document to their desktop before being able to attach in Outlook.
Thanks for any assistance.You just aren't calling the right NativeDragManager functions. See http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7d83.html
-
Problems updating/installing air application
Hi,
We have an Adobe Air application that uses the Air update mechanism for newer versions. It seems to work fine for most of the customers but on some computers when it tries to install the new version it cannot. The only clue we have are some errors we found in the Install.log in in Adobe/Air/logs:
[2012-07-09:12:14:50] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-07-09:12:14:50] Rolling back install of C:\Users\pop.radu\AppData\Local\Temp\fla73EA.tmp\setup.msi
[2012-07-09:12:14:50] Rollback complete
[2012-07-09:12:14:50] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
We have checked other discussions on this problem and most of the solutions were using an uninstall tool to remove the app and then install it again. However, we would like to know if there is another way to solve this since we don't want our customers to uninstall and reinstall the application manually each time a newer version of the app appears.
Does anyone know if there is a way to do this?
Thanks,
RaduHi Radu,
The next step would be to enable MSI logging and take a look at what is failing with MSI. Unfortunately, MSI is very fragile at times and we do see this problem. Sometimes its simply a file/folder/registry permission issue. Other times it's more severe, like a missing .msi database file. Because this is an upgrade, I suspect what is happening is that MSI is looking for the old version's .msi database file so that it can run its "uninstall" routine. If the old msi can't be found, it will bail out and the upgrade will fail.
The only solution, other than locating the old msi database file (doubtful) is to run the Microsoft cleanup utility.
Thanks,
Chris
Ps. If you haven't already, I'd recommend taking a look at the captive runtime solution in AIR 3.x. http://www.adobe.com/devnet/air/articles/air3-install-and-deployment-options.html -
Problem(16824) in updation of Air application
hello friends
i m made an air application for my project.but needs to upgrade it.so i followed the update frame work as guided in this blog
http://www.adobe.com/devnet/air/flex/quickstart/update_framework.html
this frame works fine for two -three versions but after that when i upgrade the application to new version it reapeatdly shown error messg
There was and error downloading the file: error 16824.
there is not any abnormal change in update decriptor file (on server) and application discriptor file.still facing that surprised problem.
can any body help me out.
Thanks in advanceDeepak,
Import parameters are asked once you click on Execute button of the FM. Here the screen is here.
Most of the fields look like Boolean values with 'X', if yes. Also there are 3 table icons seen. Once you click you are into the screen where you can fill the table values also. After inputting these values when you click on the Execute button in this screen the Entries in The Tables (output) will be filled. This your output.
I did not work on this. But all new FMs I try this way only. Often we need to play with FMs through Execute button and passing the Import parameters. After several trials we start understanding, what it is asking and what is returned.
KJogeswaraRao -
Drag Email into Air Application
Can someone tell me if it is possible to drag an email
message from Outlook or other desktop email clients into an AIR
application, and have the application read the contents?AIR can get text, html, bitmaps, and file handles through
drag and drop. If the e-mail client puts the e-mail into one of
those formats, then an AIR application can recieve it. Otherwise,
it can't. -
AIR Application Launching problem
Hi All,
I created one AIR application using Flash CS3. The air file size is 350+ MB.
This air file included swf and flvs.
I installed successfully but the problem is when i try to launch the application It takes time.
How can i solve this? Any one help me to solve this problem.
Thanks
Regards
BalaI'm having the same issue. It's definitely due to the videos I have embedded, if I remove them from the package it starts up much more quickly.
Is there a way to avoid loading the videos into memory until I need them? -
Hi for All, Pleeeeeeease help me, Update Air application problem
Hi guys,
I have big adobe-air ajax based application installed in my computer ,I have updated some files in my application, and generate the new(updated) version of the air file and put it in the server .My application size is 300 MB. The problem is that the update framework will download and reinstall all the files of air application(300 MB !!!) ,
Is there any way to reinstall only the updated files of my application without need to reinstall all the files during the update process ????
RegardsHi Anil,
If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
1. You choose the appropriate InfoProvider.
2. You create one or more aggregation levels.
3. You create one or more filters.
4. You create one or more planning functions.
5. You create a planning sequence.
6. You test the planning model.
which is clearly explained in below link
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
Hope you understood basic thing, as you going on doing u will know clearly every thing.
Ravi
Maybe you are looking for
-
Help with Craigslist pro notifications
-
InDesign CS6 / CC crashing on Launch
InDesign is a crashing monster in CS5, so I figured CS6 (CC) would perhaps solve some serious issues. It crashes on launch on OS X 10.8.3 - doesn't even need to be opening a document. Tried clearing caches and preferences - doesn't matter. Running
-
Unable to start oid, oc4j_security, dsa ,logloaderd process type
E:\OraHome_1\opmn\bin>opmnctl startall opmnctl: starting opmn and all managed processes... ================================================================================ opmn id=CV2K3TESTAPP02:6200 1 of 3 processes started. ias-instance id=iasrep.c
-
I am down loading the new Firefox. As soon as I stated the down load I start seeing these New Tab boxes start flowing across the top of my screen. They just keep coming and coming and I don't know what is going on. It looks like my computer is being
-
Sanyo HD-2000 Native 1080p60. How compatible?
Hi, I currently own a HD1010. I film in 720p60. I use MPEG StreamClip to produce AIC files to use in FCE 4 (which according to Movie Inspector are 59.94fps). The HD-2000 is now available which shoots in 1080p60. I suppose I can produce (rather large!