AIR - no images after export release built

Hi,
when I am running my AIR project in Flex Bulider I have images in my application. After export release built there is no images in my application. How can I fix this?

Yeah I had the same problem. Here is a hack:
If not, then you can kind of cheat. When you publish your .air file, it
will offer you the choice of files to include in the archive.
If you click "back" at this point then you have the opportunity (outside
of flexbuilder) to copy any files you need to the "bin-release" folder
that gets temporarily created as part of the publishing operation. Back
in flexbuilder, click "next" again and you'll be back in the stage where
you can specify files to include, but now you'll have the opportunity to
select the files you just copied to bin-release.
This, however, gets old pretty quickly!
ref- http://old.nabble.com/How-do-I-include-a-file-in-the-AIR-app-storage-directory-at-install- time--td21007763.html
Although, I recommend to bundle all assets up with Apache Ant, but that requires some time to configure a file to do that if you are not familiar with Ant.
And here is another link I have bookmarked:
http://forums.adobe.com/message/2294086

Similar Messages

PIXELATED IMAGES AFTER EXPORT TO IDVD

Help! I'm confused and frustrated. I have imported 65 images from iPhoto to iMovie and added titles, music and a few transitions. The movie plays fine in iMovie full screen on my 20 inch iMac. After exporting to Idvd project a number of the images (most) are pixelated and even more confusing (at least to me), when I return to the original iMovie (which was great before the export) now those images are pixelated also. WHAT IS GOING ON? , how can I avoid this? Hope I am in the right forum.
imac g5 Mac OS X (10.3.9)

Bengt: Right now I'm jubilant. Tried your methodology, and results were beautiful. Good burn and no JAGGIES. Then made a disc image and tried a burn from that. Great. If this continues I owe you a "GREAT BIG THANK YOU!!" I have been struggling with this problem far to long. Next I want to try adding some more complex transitions and perhaps some Ken Burns and hoping to see the same SMOOTHE lines. Too bad more people don't know about this for I see others posting about pixelation.
For now, I remain grateful.
imac g5 Mac OS X (10.3.9)

Problem with image after exporting from Lightroom 5

Good day. Please can someone help me? I have Lightroom 5, and I have a problem in exporting edited images. At issue, do all the necessary settings and retreat noise and sharpness adjustment by brush adjustment tool, however, to export the image, noise and some minor adjustments are lost. Because in Lightroom visualize the way you wish, but after export, is not it the same? How do I get a different result? Thank you all!

I have the same problem!
Something got broken with my Lightroom 5.6 (Windows 7Pro) two days ago and I don't see any adjustments made with brush after exporting photos!
It's not a problem of library or RAW files - the same, work fine on other computers (iMac).
I tried to clean the computer with CC Cleaner Tool, and install everything again, but it didn't help.
I already lost 2 days trying to fix it, and I don't want to format the drive and install Windows again
Can anyone help?

Pixelated Images after exporting

I have recently switched from a Mac Laptop to a PC desktop. After I export my images they are really pixelated. I am not sure if lightroom is different for a PC. Can someone please help me.
I have the same settings picked too.

>switched from a Mac Laptop to a PC desktop
That should teach you not to do that ;-)
Sorry bad joke. The PC version behaves exactly like the Mac version so the same settings should give you identical files. Your screenshot doesn't show the crucial setting -> quality. It should be 80 or higher in general. Around 60 or so you'll start seeing blocky jpeg artefacts that might look like pixelation.

Editing RAW images after export to JPEG

Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

Jagged images after export to .mov format

Hi everyone reading,
In a project I'm working on in FlashCS3 Pro, I have a problem
with export > Quicktime film > ect.
When the encoding to the .mov format is finished and I play
my new created movie in QuickTime
a lot of images are jagged, not complete or the previous
frame remains in the vieuw.
How can I get a real clean and proper encoding from a .fla to
QuickTime H.264 or QT Animation?

Welcome to the discussions, evorot69.
If your original file is an MPEG file, you'll need to use MPEG Streamclip in order to convert it to an iPhone format WITH the audio.
http://www.squared5.com/svideo/mpeg-streamclip-win.html

Update image after export and overwrite

I am on XP64, but I expect this may apply to vista too. LR 2.3
1) I save my adjusted raw file as a dng to the same folder as the original raw using the export function under the file menu.
2) I decide to do some more adjustment and export again using the same file name. I select overwright to update the existing dng with my new adjustments (I only want one dng file).
3) On inspection I find that the dng file is not updated. I have to sync the folder to get the new settings applied to the dng. Would be nice to have this done automatically.

Patric,
Thank you for the advice. I did a sample on a separate sequence: same settings but field dominance none. I exported into 3 formats: appleprores 422, H.264, and MPEG-4. The quality is not much different. It still appears interlaced on the output.
I ended up applying the "de-interlace" filter on a few clips inside my first sequence with Upper (odd) field dom., and exported it and it looks good, except it does not play smoothly but that might the issue with my hard drive or fire wire connection as I have the export on ext. disc.
I must learn more about field dominance and why my camera records in Upper odd. I thought that there should be an output codec that would accommodate that field so I would not have to convert to progressive at all. Do you agree?
Thank you for any suggestions,
Izabela

Export Release Build error

I am exporting AIR project and getting the following error after providing a certificate:
"Error occurred while saving the project settings: "default" build target cannot be found for the selected project."
I am using FB 4.5.
Thanks

I get this error as well everytime I create a mobile project in the lastest version of Launchpad, import the resulting files into Flex Builder 4.5 then try to export the project as a signed AIR desktop app. Exporting Release Build to a mobile target device works fine however.
Here is my log file as well:
!ENTRY com.adobe.flexbuilder.project 4 43 2011-09-09 17:33:29.640
!MESSAGE Failed to get build target settings: default
!STACK 0
java.lang.Exception
     at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1009)
     at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
     at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
     at com.adobe.flexbuilder.project.ui.utils.ProjectBuildPackagingUI.doApplySettings(ProjectBui ldPackagingUI.java:754)
     at com.adobe.flexbuilder.project.ui.utils.ProjectBuildPackagingUI.applySettings(ProjectBuild PackagingUI.java:781)
     at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionBuildPackagingPa geContent.saveSettings(ExportReleaseVersionBuildPackagingPageContent.java:131)
     at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionBuildPackagingPa ge.saveSettings(ExportReleaseVersionBuildPackagingPage.java:84)
     at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:144)
     at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:811)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:430)
     at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:234)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4066)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3657)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
     at org.eclipse.jface.window.Window.open(Window.java:801)
     at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
     at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
     at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
     at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
     at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
     at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4066)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3657)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2640)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2604)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
     at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
Update:
     As a work around, I tried to export it as an unsigned airi, then manually signed it with ADT using a self signed certificate and it worked perfectly...
Message was edited by: Jason Woodcock

Can't Export Release Build for AIR app...

Flash Builder 4.7 won't let me export a release build for any AIR apps at all...
It started when I wanted to make some changes to an old AIR app. Couldn't even run it in the debugger, so I updated the AIR SDK (using instructions found here: http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html and here: http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html )
So after doing all that, and making some other changes, I finally got my AIR app to run in the debugger in Flash Builder 4.7. Made the changes I wanted to make, then tried to Export Release Build... Kept giving me a "Password Incorrect for this certificate" error whenever I tried it -- but it would never let me enter a password. I went to Project | Export Release Build, and on the first screen there, I would click "Next" and it would jump straight to compiling, skipping over the screen where you're supposed to be able to enter the certificate info and password.
Figured maybe because it was an old AIR project, that was causing the problem. So I started a brand new AIR project -- very simple one with just a <s:Label> inside a <s:WindowedApplication>. Went to Project | Properties | Flash Builder Packaging and created a brand-new self-signed certificate (which seemed to work) but again upon trying to export the release build, it wouldn't let me get to the screen where you enter the password. Clicking "Next" from the first screen on Project | Export Release Build just jumps straight to compiling and (of course) it gives me the Incorrect Password error, because it never gave me a chance to enter the password.
So what is going on here? Why can I not export any release builds for any AIR projects? This is extremely frustrating -- Flash Builder 4.6 never gave me these kinds of problems. What can I do to fix Flash Builder 4.7 so it will work properly with AIR projects?
Thanks,
L.

Hi,
I think something's wrong with either your FB 4.7 installation, or how you updated the AIR SDK. I just walked through the exact steps you listed (except I already had the AIR SDK overlayed) and I can build a desktop AIR app without issue. I get prompted for the password and everything.
I wish I had a better answer, but I'd suggest uninstalling and re-installing FB 4.7, be sure to remove preferences as well. Then before you update the AIR SDK, try building an AIR app with the base SDK that's included in 4.7. If you can get it to compile and prompt you for the password, then it's the way you overlayed the SDK that's messed something up.
Make sure you download the correct AIR SDK that's specific to Flex. On this download page: http://www.adobe.com/devnet/air/air-sdk-download.html is a reference in small print that says: Note : Flex users will need to download the original AIR SDK without the new compiler. Mac Windows. Make sure it's that version of the SDK (without the ASC 2.0 compiler). Then try overlaying the SDK again and see if that works.
I can definitely confirm that what you are experiencing isn't the norm, and that you can get the latest AIR SDK to work with FB 4.7
Good luck!
iBrent

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

1. Select Partition4: Bootcamp. You should see advanced Options.
2. Click Format and convert the partition to NTFS.
3. Click Next.
Reference - http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
See Page 6.

File appears to be unsupported or damaged after exporting an image.

After exporting an Image I wanted to go back into the development module and make another tonal correction. After clicking on develop I received this error "File appears to be unsupported or damaged". What happened? I had just toned and exported it. The file is on an external hard drive and is a Canon MKII CR2. I'm using Lightroom 4 on a Mac Book Pro. Thanks.

Did you tell LR to add the exported photo to the library upon export and are now by mistake trying to work on the "re-imported export"?

Buttons w custom image not showing up after export

Hi,
I have alot of buttons created with a custom image and all function fine within CP6, but after export to .exe module the buttons loose the image and appear as white squares. They still function correctly just have lost the image. Any ideas as to why?
Thanks!

Hello,
Welcome to Adobe Forums.
I tested this same workflow at my end and it worked for me, I used "Image button" instead of "Transparent button" and imported the image, screenshots :
Hope it helps !!
Thanks,
Vikram

Objects dissapear after exporting image

Hi, I´m a newbie at Illustrator and I have the following proble,:
I have been designing a personal card, the first screenshot shows how it should like after exporting, but if you take a look at the second image… some objects literally dissapear. I tried exporting different formats (JPG, BMP…etc) and it´s all the same result. I attached the link of Illustrator project so you can download and try to guess what is going on here.
Thanks in advance and sorry for my English
Leandro
https://www.sendspace.com/file/fbdwng

Thank you for your help Mylenium! Honestly I have been working on this like 2 days from now "by ear", I saw a lot of tutorials at youtube trying to learn from scratch and to achieve this… Of course my knowledge is not enough to solve that stuff. There are things that you (trained people) see that I can´t see… or maybe I think it is ok and actually it isn´t. For example the saturation you talk about on the flute.
The place where this prject will be printed (1000 copies) stablishes some rules to send files… for example:
Size: 50 mm x 90 mm
Images color MUST be in CMYK (C 60% M 50% Y 20% K 100% for black intense background)
Font must be converted into Vectors
I´m a little lost with this all that is new to me.
Anyways I thank you for your words. I hope I can figure it out =)
Leandro

Flex Builder 4.6 app runs fine in builder - exported release Air app flashes and dies

I have tried exporting release build on more than one computer.
I have successfully exported release builds of other projects.
if I open the application's .exe file and scroll down I see this kind of stuff:
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
      R6033
- Attempt to use MSIL code from this assembly during native code initialization
This indicates a bug in your application. It is most likely the result of calling an MSIL-compiled (/clr) function from a native constructor or from DllMain.
R6032
- not enough space for locale information
      R6031
- Attempt to initialize the CRT more than once.
This indicates a bug in your application.
R6030
- CRT not initialized
R6028
- unable to initialize heap
    R6027
- not enough space for lowio initialization
    R6026
- not enough space for stdio initialization
    R6025
- pure virtual function call
   R6024
- not enough space for _onexit/atexit table
    R6019
- unable to open console device
    R6018
- unexpected heap error
    R6017
- unexpected multithread lock error
    R6016
- not enough space for thread data
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
   R6009
- not enough space for environment
R6008
- not enough space for arguments
   R6002
- floating point support not loaded
    Microsoft Visual C++ Runtime Library
... <program name unknown> Runtime Error!

I have tried exporting release build on more than one computer.
I have successfully exported release builds of other projects.
if I open the application's .exe file and scroll down I see this kind of stuff:
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
      R6033
- Attempt to use MSIL code from this assembly during native code initialization
This indicates a bug in your application. It is most likely the result of calling an MSIL-compiled (/clr) function from a native constructor or from DllMain.
R6032
- not enough space for locale information
      R6031
- Attempt to initialize the CRT more than once.
This indicates a bug in your application.
R6030
- CRT not initialized
R6028
- unable to initialize heap
    R6027
- not enough space for lowio initialization
    R6026
- not enough space for stdio initialization
    R6025
- pure virtual function call
   R6024
- not enough space for _onexit/atexit table
    R6019
- unable to open console device
    R6018
- unexpected heap error
    R6017
- unexpected multithread lock error
    R6016
- not enough space for thread data
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
   R6009
- not enough space for environment
R6008
- not enough space for arguments
   R6002
- floating point support not loaded
    Microsoft Visual C++ Runtime Library
... <program name unknown> Runtime Error!

AIR - no images after export release built

Similar Messages

Maybe you are looking for