Aironet - Two SSIDs, One with WPA, One Without

I have an AP that I want to have two SSIDs on, let's say, "Admin" and "User."
The User SSID should be wide open, unsecure, etc.
The Admin SSID, should not be broadcasted, and be protected via a passwrd, preferably WPA pre-shared key.
Is this possible? If so, how?
So far I have both SSIDs working, in an open/unsecure mode. My VLANs are working great, and when I tried the suggestion in the help, it looks like it turned on WPA, but now I cannot see the SSID for Admin.
If you need a copy of the config, let me know.
Thanks,
Anthony

version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$zH.z$lhh9AqT3HXXU2WxXSd2f20
ip subnet-zero
no aaa new-model
dot11 ssid faculty
vlan 100
authentication open
dot11 ssid students
vlan 400
authentication open
guest-mode
username x password x
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid faculty
ssid students
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
interface Dot11Radio0.100
encapsulation dot1Q 100
no ip route-cache
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
bridge-group 100 spanning-disabled
interface Dot11Radio0.400
encapsulation dot1Q 400 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
ssid students
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio1.400
encapsulation dot1Q 400 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.100
encapsulation dot1Q 100
no ip route-cache
bridge-group 100
no bridge-group 100 source-learning
bridge-group 100 spanning-disabled
interface FastEthernet0.400
encapsulation dot1Q 400 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id FastEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
control-plane
bridge 1 route ip
line con 0
transport preferred all
transport output all
line vty 0 4
login local
transport preferred all
transport input all
transport output all
line vty 5 15
login
transport preferred all
transport input all
transport output all
end

Similar Messages

Two Firefox at the same time, (one with images, other without)?

Hi,
Is is possible to use two firefox browsers at the same time, the one with images enabled, the other disabled?

See this easy to follow directions:
http://www.callum-macdonald.com/about/faq/multiple-firefox-instances/

How to make a synchronous acquisition of two analog signals with a one channel DAQ ?

Hi !
It is the first time I use Labview. I have just made some easy VIs, and now, I do not know how to deal with my problem...
My problem : I have only one acquisition card (DAQ Ni 6034E) and I would like
to acquire simultaneously two analog signals. It seems to be possible, in a quasi-synchronous acquisition if the card acquires one point of the first signal, then the first point of the second signal, then the second of the first signal, and so on ... I thougth that I could made two sequencies with a VI of data acquisition in each sequency, with the AI MULT PT. But with this, I think that I will lose the precision of the sampling frequency. And I have to know the sampling fre
quency ...
Thanks for your help !
Carline

Hi Carline,
A PCI-6034E is a low-cost board, which only has one Analog to Digital Converter (ADC).
With only one ADC you can't acquire different channels at the same time. That's why you find a multiplexer before the ADC in this type of board. This enables you to acquire multi-channels at the same rate quasi simultaneously. The samples of the different channels will be interleaved as it is explained in the following knowledge base :
- http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/9379ea091c264b7c86256bc90082ca5d?OpenDocument.
With this method, the sampling frequency is the same for all channels. The sampling frequency of one channel is determined with the "scan rate" parameter. There is only a small delay between the samples
of each channels. When you perform an interval scanning acquisition, this delay depends on the "sample rate" that you specify. To have more informations about this terminology, please refer to the following KBs :
- http://digital.ni.com/public.nsf/websearch/4D1435DF82EF494186256D8A006DD6D4?OpenDocument.
- http://digital.ni.com/public.nsf/websearch/4D1435DF82EF494186256D8A006DD6D4?OpenDocument.
To easily perform such a multi-channels analog acquisition, you can use the VI named "AI Acquire Waveforms.vi". You also can use an example provided with LabVIEW. You just have to browse the NI Example Finder in "Harware Input & output >> Traditional NI-DAQ >> General".
Best regards,
Benjamin
National Instruments France

How to get rid of dupe music icons on iPhone, one with cloud, one without?

After getting a replacement iPhone, restoring from backup, and re-syncing, I have dupe entries for every song on the phone. One has a cloud icon and one doesn't. These weren't there before! What happened, and how can I get rid of all these dupes (there are thousands)?
-- I don't see dupes in my library, nor on my iPad, nor in "On This iPhone" from iTunes... just on the phone itself.
-- The dupes exist even after syncing.
-- I tried deleting all music storage on the phone and re-syncing, but I still wind up with dupes, one with the cloud and one without.
Any help would be greatly appreciated.

unsync the music from the phone. the songs with clouds are 'itunes in the cloud' which you download from the cloud server
the reason you don't see them in 'on this iphone' is that they're not technically on the phone nor are they taking up capacity yet
when you unsync your music, the songs with clouds should remain. you download them by tapping the clouds

Does apple replace iPhone 5 the used one with refurbished one

I got replaced my Iphone5 with some issues and when i set my back up data
I need to log in my Apple ID... and It just popped up with unknown apple ID.. even it was not one ID.. there were couple of different ID...
so.. i thought maybe the ID were preveous owners?
I did not want to get refurbished phone..;; coz I already had the issue with my phone before... and I dont want to go through AGAIN!!!
Is it normally? Apple use refurbished one to replacement?? and.. even.. It looks like not a one time they replace with this iphone5...

Yes, Apple replaces defective phones with refurbished ones. However they wipe them clean, and guarantee they have no flaws before giving them to customers.
Is very unlikely they would leave someone elses Apple ID on it.
There were some issues with the iTunes and Apple stores that may have been responsible for odd apple iDs popping up, as several users reported as much.

How to overload two different procedure with just one name in to package

i have created two procedure avg1 and avg2.avg1 calculate average of total salary based on e_id and avg2 calculate average based on j_id.now i want to create a package with specification and body where i want to use just one name -avg- for two different procedure.

You can overload the same name for procedure as long as their formal parameters differ in number, order, or datatype family.
Read more about overloading in documentation

There are two iPhones associated with my one Apple ID. Will I be able to "find my other phone?"

i have two iphones on my Apple iTunes account. I would like to use the App "Find My Friends" to locate each phone but it seems it works only from the Apple ID not the phone number.
In order to enjoy many of the features sometimes it seems Apple wants everyone to have their own account. Pay for their applications twice. etc. I think this is terrible.
Does anyone know how I can set up my iphones so I can use Find My Friend?
Thanks

Same issue...I think I found it though, but have not tested with my other devices yet. You do it with email addresses though, not phone numbers. You can associate additional email addresses with your primary apple id. For example, my email address is the primary apple id, but my wife and kids all have email addresses associated with this account. That is how we can FaceTime and iMessage each other. In the Find Friends app, touch "Me" at the bottom, then "Account" at the top. Once you are signed in with your primary apple id, you can select one of the other email addresses associated with your account by touching "Send As." Again, I won't be able to test it until I get home, but that is how it should work.

Double track listing in iPhone AFTER iCloud download one with and one without iCloud logo

My phone has a number of songs downloaded from match and the. After a few days the songs will appear listed twice now with an iCloud stumble next to one. As if it doesn't realize that the track has been downloaded and is on my iPhone. It is as if it doesn't realize the iCloud tracks are already on the iPhone. It is kinda crazy and makes it unusable

I know it this post week old. But try go into settings, iTunes and App Store turn off "Show All" for Music. If left on, it will show even show music not downloaded to your phone.

Is there any way my wife and I can have our two iPhones sync with our one iPad via the iCloud?

Currently we are using her apple ID but I'm wondering if we can both sync.

What do you mean by "sync with our iPad" exactly? A litle more detail ???? What do you want to sync?
If you use the same ID on all devices you should be able to sync across all devices with iCloud - as long as you are using only one iCloud account on all three devices.

2 computers..one with xp, one with win 7

have one computer at home with xp and another i take on the road with win7...can i load elements 8 on both and use the same catalog on both

The PSE 8 license allows you to install it on two computers.
As for sharing a single catalog between two computers, see this FAQ for options:
http://johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Using_a_single

Two ssids in one Dot11Radio interface

Hello,
Whilst configuring CISCO867-W router I have encoutered the following problem.
On built-in access point I have one Dot11Radio interface. Is it possible to have two ssids associated with two different vlans on one interface? If yes, how to do it? If no, is there any solution to have two separated wlans on an access-point with one Dot11Radio?

Of course you can have two wlans associated with two different vlans on the same radio interface.
Here is a simple example on how to it?
on the router the most important thing you have to make sure that the interface
Wlan-GigabitEthernet0 is configured as trunk and allowing the vlans mapped on the ssids defined under the radio interface of the embedded AP. Also you have to make sure that dhcp pools have been defined for both vlans.
Assuming that you have two ssids:
ssid1 & ssid2 mapped to vlans 1 and 2 consecutively. vlan 1 has been defined as the native on the trunk defined on
Wlan-GigabitEthernet0
AP(config)#dot11 ssid ssid1
                #authentication open
                #vlan 1
               #exit
AP(config)#dot11 ssid ssid2
               #authentication open
               #vlan 2
               #exit
AP(config)#interface dot11radio 0
              #ssid ssid1
              #ssid ssid2
              # no shut
              # exit
AP(config)#int dot11radio 0.1
               #encapsulation dot1q 1 native
               #bridge-group 1
               #exit
AP(config)#int dot11radio 0.2
               #encapsulation dot1q 2
               #bridge-group 2
               #exit
AP(config)#int gig 0.1
               #encapsulation dot1q 1 native
               #bridge-group 1
               #exit
AP(config)#int gig 0.2
               #encapsulation dot1q 2
               #bridge-group 2
               #exit
Please Don't forget to mark the question as answered once having the right response

Can I have smart print eprint on two different computes with only account

Can I have smart print eprint on two different computers with only one account???

Are you talking about accessing an ePrint account from various computers? Or having HP Smart Print on multiple computers?
ePrint account information is kept at the site. You can log on it from anywhere, from any computer. Just go to the sire and click on Sign in and enter your password and email address. You can have multiple printers on one user account at ePrint Center (EPC). But printers can only be registered on ePrint Center to one user account. If you have an ePrint cable printer you can create an account at this link here.
HP Smart Print does not require an account you can download to an Internet Explorere browser (versions 6-9) and use it with no registration.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Running two SSIDs, one with WPA2 and one with WEP

Hi,
I have a WRT610N.
How isolated are the two SSIDs that I can run?
I know one is running at 5GHz and the other at 2.4GHz. I've given each an SSID and a different security policy: I run "sensitive" stuff under WPA2, and I run the other for legacy hardware that supports only WEP (eg my son's Nintento DS).
But are these two keys to the same house, so to speak? If someone cracks my WEP network, can they access the machines on the WPA network? Or are they completely isolated?
Does this make sense?
Thanks for any enlightenment.
-- Mike
Solved!
Go to Solution.

Yes, they are "two keys to the same house". The "house" is your LAN. If someone cracks your WEP, and wirelessly breaks into your router, then they have access to your LAN. This would be like allowing a hacker to wire his computer directly to your router. Being on your LAN, puts the hacker in a very good position to break into any other computer on your network. Your WPA2 encryption does not give you any protection from someone who is already on your LAN.
The solution to your problem is to run two separate wireless routers:
modem ---- router1 --- router2
router1 is set to "Local IP address" 192.168.1.1 , WEP encryption , set "AP isolation" to "enabled" , (note: no printers on router1)
router2 is set to "Local IP address" 192.168.2.1 , WPA2 encryption, use a strong password (and not anything similar to the WEP password).
modem is wired to Internet port of router1
LAN port of router1 is wired to Internet port of router2
The wireless 2.4 GHz channels on the two routers must be different, and are preferably at least 5 channels apart. Usually channels 1, 6, or 11 work best.
With the above two router setup, the Internet port of router2 should protect you from any intruders on router1.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How can I make two copies of the same picture one with my watermark and one without for printing for clients?

how can I make two copies of the same picture one with my watermark and one without for printing for clients?

Export the photo twice, once with a watermark and once without a watermark.

Aironet - Two SSIDs, One with WPA, One Without

Similar Messages

Maybe you are looking for