Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

Similar Messages

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

IPhoto no longer works with Nikon 5100 after upgrade to 10.8

IPhoto with newly installed Mountain Lion no longer recognizes a connection to my Nikon 5100. The USB cable is good, as it works with my other Macs -- OSX versions 10.6.8 and 10.7.4, just as it did with my Imac before I upgraded to 10.8. My Preferences are set to recognize any camera. I even upgraded to IPhoto 11 v9.3.2, but no help. Any ideas?

Hi, I have the same problem with my Nikon Coolpix 5000: camera is not recognized at all by Mountain Lion after upgrading: worked just fine with Lion.
Problem: I connect the camera, Mac (MacBook Pro Late 2011) freezes for a while (!!!) then external disk icon does not appear.
Console registers messages like the following:
20/08/12 19:34:24,000 kernel[0]: USBF: 363761.547 AppleUSBEHCI[0xffffff801fcbf000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
Strange thing is, my Coolpix 5000 is a very old camera with only USB 1 support: this problem occurs to me with every USB 1 device connected on Mountain Lion!
Hope they'll fix the problem or just find some workaround...

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

I use Citrix Receiver to connect to my office systems when I work from home. The office systems are Windows 7 based and I work at home on a Imac. Up to yesterday everything worked like a dream. Then I upgraded from OSX 10.9.4 to 10.9.5 and sine then my keyboard has stooped responding when I am connected to my office system. When I close Citrix the keyboard works OK. I tried to connect using a MacBook still on 10.9.4 and there are no problems with the keyboard in Citrix. What do I do to get the keyboard to work under 10.9.5?

Citrix Receiver is upgraded to 11.9.0. http://discussions.citrix.com/topic/356870-receiver-for-mac-119-tech-preview-for -os-x-yosemite/
It works good together with OSX 10.10 Yosemite.
I think they did a great job releasing an update so soon after the release of Yosemite.
I upgraded to Yosemite on a mid 2011 iMac. It all performs better that OSX 10.9.5. No issues so far.

IHome no longer works with iPhone 4s after iOS 6.1 update.

My iHome no longer works with iPhone 4s after iOS 6.1 update. Prompts message 'This accessory is not supported by iPhone'. Has anyone come accross this and is there a fix?

Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

Airplay no longer works with iTunes

Airplay no longer works with iTunes 10.6; try to stream to speakers connected to Airplay device--use to work fine. Now, in iTunes, the icon in the bottom corner actually says 2 speakers, as it should, but when I open it it only shows speakers connected to computer directly. I have tried re-installing the AirPort utility and configuring it in every which way. I have tried turning off IPV6 in the network. Nothing seems to work.

I noticed this too and think it's by design. The new master volume slider in the AirPlay window is set at the highest volume in your list of speakers. Drag either the master volume or your external speaker slider to max, and you should get normal volumes out of your Airport Express speakers.
Unfortunately, the volume slider on the iTunes window seems to be the master volume now, rather than just the volume for the computer. So if you mute the computer using that slider, you mute all speakers. To mute just the computer, you have to do it though the AirPlay speaker list now. Unless I'm missing a preference setting somewhere... thought there used to be something in iTunes or Airport Utility that let you toggle this behavior, but I don't see anything now...

IPod Touch no longer works with car stereo after 4.0 update

I updated my iPod to 4.0 a couple of days ago, and my Hyundai Santa Fe's built-in iPod interface no longer recognizes my iPod's music - it just says "empty iPod" or something of that nature. Is anyone else having this problem?? What should I do?

Add me to the list. Brand blankety-new ipod touch that after 4.0.2 wouldn't work with the Subaru-factory-installed ipod connector in my '08 STI. The shut-it-off-and-restart-in-the-car method at least made it able to play music again but still no recharging.
To add insult to injury I did the have-an-Apple-GENIUS call me thing. The first thing was that they called me....for about 1/4 of a second. The phone blipped for less than a ring and then I got an email saying, "Oh, we TRIED to reach you and you weren't there. Why don't you call us?". So I called and was immediately put on hold. When one of the geniuses finally picked up, I described the issue with great patience and his insightful answer was, "let me put you on hold while I talk to my supervisor." So I sat on hold for five minutes until...they just hung up...no answer, no, "gee we think you're SOL"....just "click". Thanks a boatload Mr. Jobs.

Firewire iSight not working with 3rd party software on Leopard

I just installed OSX Leopard and not able to use firewire isight on any program other than ichat. I use 3rd party software for video conferencing (educational setting) and need an external iSight so as to position the camera on larger groups. Anyone have any suggestions?

My external iSight is working fine with QuickTime Pro, iMovie, Photo Booth (v2).
If http://docs.info.apple.com/article.html?artnum=93240 does not get things working, and especially if your problem is only with your 3rd party app, contact the developer to see if there are known issues with Leopard.
Jim Destin

Image preview not working with 3rd party photo apps in iPhoto/Image Capture

I haven't had a problem until recently with the iPhone 4. Pictures taken with third party photo apps such as Shake It Photo or Hipstamatic no longer generate a thumbnail preview in either iPhoto or Image Capture. It's just a generic jpg icon. All pictures taken with Apple's camera app appear just fine. I also had a problem where I couldn't import any of the photos, but I restarted the phone a couple times and that seemed to fix the importing issue, but not the thumbnail preview issue. This is particularly weird because i've been importing pictures since the first day this phone came out, and it's only been doing this since yesterday.
I know a lot of people are having problems getting their iPhoto to recognize the phone at all or that there are photos on the phone, but is anyone else having the same problem as me? Any solutions? I have iPhoto 8.1.2.
Thanks!
Message was edited by: Bud Inski

I have this issue but didn't recognize it until I read your post. I thought it was 2 bad photos.
I'll subscribe to this tread to see if anyone comes up with a fix.

Trouble getting java install wizard to work with 3rd party software

Hi,
I just installed Java 2 SDK version 1.4.2 under Solaris 8. The installation appears to be fine. I changed
the links and PATH to make sure I'm pointing to the correct version. I am trying to install a 3rd party software called Powerchute Network Shutdown by APC, to be able to shut down our servers remotely, that are attached to our APC UPS. I get these error messages from the software:
starting the wizard
Exception in main calss "JExpressLoader"
java wizard not started properly
unable to start the install wizard
Tech support at APC has been unable to help me. I am wondering if someone can tell me how to verify my java wizard is installed correctly. (I don't even know what a java wizard is by the way, so hopefully
this question makes some sense to someone).
Thanks.
-Trish

You need Xwindow System in your sun.

App Store Pages no longer works on Snow Leopard after upgrade

I bought Pages (and Numbers and Keynote) from the App Store last summer. I have been using it on Snow Leopard (10.6.8) with no problems up until a few weeks ago. Since then I must have told the App Store application to update all applications with updates (though I don't particularly remember doing that), and now when I attempt to open Pages I get a dialog box saying "You can't use this version of the application Pages.app with this version of Mac OS X. You have Mac OS X 10.6.8. The application requires Mac OS X 10.7.4". This is outrageous. How can a routine update of a App Store app stop it from working without any kind of warning? How do I revert to a version that will work on Snow Leopard? Don't just tell me that Pages isn't supported on Snow Leopard, because the version I bought last summer has been working just fine. Am I supposed to Google through pages and pages of information looking for warnings before I upgrade each application before updating? (I also own Aperture.) And what if I make a mistake and accidentally upgrade to a version that no longer works?

Which version of Pages 09 do you have? You don't need higher version than 4.0.4 on Snow Leopatd. Here you can download the iWork 9.0.4 update.

Issue with multi-monitor after upgrading to Mavericks

I ran Mountain Lion OS on my MacBook Pro along with VMWare Fusion 5 with an extra monitor and everything was working fine till I upgraded to Mavericks. Since then, I am not able to see the 2nd monitor in the Extended Mode.
on Apple, everything is work and I see two monitors and can move one window from one display to another but when I open my Windows in Fusion, only one display is accessible (the 2nd display showing Apple screen, which wasn't the case before). Even I can see that the color settings I had done before for my additional monitor is not in place after upgrade.
I have checked my WIndows and settings are fine as it was before. It's Windows 7 Pro. I read some articles that I have to upgrade to Fusion 6 and some others that mentioned this is an issue with Mavericks and upgrade won't fix it. So, I am looking for some advice or similar experince, if any.
Thx in advance for your help.
Behzad

Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

Trouble with Canon 2020Adv after upgrade to Maverick

Hi
We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac. I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver. Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
Any suggestions??
Thanks

Two possible causes for the issue you are having.
1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

Mail app constantly synching with iCloud server after upgrade to Mavericks

Since upgrading to Mavericks, Mail has been constantly synching with the iCloud server - and I mean constantly. I know this because I have the Activity window open. Consequently there is often a significant lag between clicking Send on a new message and it being sent, or new messages being downloaded. I have another iMac at my office and the same problem is being experienced there.
I left the computer running all night to see if it would eventually sych everything, but it seems to be going in a constant cycle ever since the upgrade.
If it means anything to anyone, the Console window displays a continuous stream of data similar to this:
9:24:37.448 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
9:24:37.449 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
9:24:39.808 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
9:24:39.809 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
Can anyone offer any advice on what the problem might be and how I might fix it.
Thanks,
Kevin

No solution here, but I have either the same or a similar problem. Apple Mail with Gmail (IMAP) used to work fine with Mavericks.
Now with Yosemite most emails load ok, but some show the spinning wheel and "Loading..." message forever. These messages never load.
I also have Thunderbird and it loads and shows these messages just fine. The messages that don't load in Mail are simple plain text messages so it's unrelated to complex attachments and such.
Clearly something is broken in Yosemite that wasn't broken in Mavericks.

Is anyone having trouble scrolling with your mouse after upgrading to Mavericks

After I upgraded to Mavericks my mouse seems to just time out and not work. I can point and click and that works fine but the scrolling is terrible. Just stops working.

Mavericks issue. See more like this at right.

Airplay no longer working with 3rd party after upgrading to Maverick.

Similar Messages

Maybe you are looking for