Airplay not stable (stutters)

I get radio and Spotify via Airplay not stable running. I have Time Capsule with Serial: C86H21DWDM74 and 7.6.4 software and an Airport Express to Serial: C86LG8WGDV2R and software version 7.6.4 and a Fritzbox 7340 modem / router. The following setups I've tried but not working properly:
Fritzbox, LAN cable to the TC and linked via wireless network Extend the AE
Fritzbox, LAN cable to the switch and that the TC and the AE linked.
Fritzbox, LAN cable to AE and TC omitted
Fritzbox, LAN cable to AE and with a LAN cable to the TC
Fritzbox, LAN cable to TC and with a LAN cable to the AE
Tried to extend wireless network, join network and create new network and created two separate networks. Different channels selected and tried automatic channel, but without any positive result.
Via IStumbler the Wifi checked and looks good. I have an iPhone and iPad 2.4 GHz to 5 GHz tried and the distance between idevice and AE is max. 4 meters.
[IMG]http://i.imgur.com/E8CG8Y1.png[/IMG]
The network start with 0 are mine
Does anybody has an idee how I can get Airplay working properly?
Thanks in advance.

If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.

Similar Messages

The newest version of firefox is NOT STABLE. I have gone back to Firefox 3.0.5, and that works fine. FIX IT

I have a Macbook- I'm running OSX version 10.5.8. Previous versions of firefox have always worked fine. I downloaded the newest version of firefox, and have had all sorts of problems with it. After about 6 weeks of struggling with it, I have gone back to version 3.0.5. I know it's an earlier version, but the performance is way better. Windows and tabs open quickly, there are no loading problems on any sites, and other browsers work fine now, too. I run safari and google chrome also. I was almost at the point where I was going to pass on firefox altogether. In my opinion, the newest version is NOT STABLE and unless you fix the problems, I will not use it. This was a terrible experience and I will not try a new version right now. I'm just happy that I have a stable version of firefox again. And by the way, the older version is way faster loading pages, too.

Going all the way back to Firefox 3.0.5 is shear foolishness, it is 14 security versions behind the last 3.0.19 release. And that version is missing at least a dozen security updates that were applied to the 3.5 and 3.6 versions after support for 3.0.x ended.
If you are not happy with Firefox 4, you should have installed Firefox 3.6.17. That is very similar to the 3.0 and has all the security fixes that have been released since support for Firefox 3.0.x ended last year.

AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437

The signal is not stable after the updates 7.1 ver

Dear friends,
i have a problem with my BB 9380 curve, after i update from 7.0 to 7.1 my signal is not stable. if u have any suggestions to solve this case. the reason why i update this mobile because my social servces is to slow. instead of solving the problem, its getting bigger the problem.
thx!!

Hey Bugoysky,
Welcome to the BlackBerry® Support Community Forums.
Network related issues are best handled by your network service provider, we would suggest contacting you them for further investigation into this to help further diagnose the cause.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Power button on my iphone 5s is not stable

Hi
I've purchased recently the new iphone 5s by friend in usa,
Since opening the box I noticed that is the power button on my iphone 5s is not stable ! It moves up and down and I've comparing it with several friends iphone 5s and it was the only one in this case, i am from jeddah saudi arabia and There is no an authorized dealer in my country for repair within the international warranty Please help me and Thank you And I wish you a happy day
# sorry for may bad english

Thank You
but My friend returned back to Saudi Arabia

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.

Airplay not detected in windows 7 itunes.

Airplay not detected on windows itunes even after windows update. Security & windows firewall not an issue. Please assist in re-installing the airplay option in my windows 7 itunes.

I, too, have the same problem. I have read multiple posts, but nothing works. It all began with an iTunes update. Airplay, my ATV, home sharing, and Apple Remote all worked. Now, everything that is dependent on iTunes does not work.
They are all on the same network. I have checked it and changed it multiple times. My ATV retrieves photos from my Win 7 HP computer fine, but iTunes might as well not exist. The ATV won't see iTunes through home sharing. None of my AirPlay devices are recognized by iTunes. There isn't even the icon. Remote doesn't recognize the iTunes library either.
I have reinstalled iTunes several times. Shut down and restarted everything several times. On two occasions, it all worked for a short time, so I know it can work. But I can't replicate that, no matter what I do.
I have disabled Norton security (and updated it). No difference. I shouldn't have to remove it since it all worked before the iTunes update. That's why I believe it is an iTunes issue. It once worked. Everything else works.

I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

App Store->Purchased
iTunes->Purchased->Download All

K7 GTX receive ok but not stable (pattern sensitive)

Hi,
I made a sensor with 8b10b TX fit Xilinx K7 GTX,
The data transfer is ok now, but not stable,
some special code (pattern) have higher error possibility.
Is there any part can be tuned to decrease the error rate?
or any document can be refer to? Thanks !!

Dear Austin,
Thanks for the reply,
I use same speed, cable, connnectors, and protocol, for both my TX IC & Xilinx K7 TX,
Xilinx K7 is ok, signal swing 800mV diff p-p, my TX IC can only 400mV diff p-p, (in spec)
my TX IC eye diagram jitter is larger than K7, but should be in spec (0.35UI, if I understand correctly).
improve my TX refernce clock source quality, TXPLL loop bandwidth, and K7 GTX RXEQ (from DFE-->LPM) can help,
but still has annoying specific symbol error,
the AC couple cap is 0.1uF, for 1.25Gbps & 2.5Gbps 8b10b,
Is there any spec for comma usage ? comma-to-comma maximum spacing or better comma type ?
since DFE-->LPM RXEQ improve a lot, how can I tune RXEQ parameters ?
Thanks and Best Regards,

Universe Connection not stable

Hi,
I have been using Universe Designer(BOXI 3.1) and connect to an Oracle 11g DB. The issue is that the connection I have created is not stable. When I test the connection, it would show me "Server is responding!" and suddenly within a matter of few minutes it would again lose connection.
I have never seen any particular pattern in which is happens, but have done the following checks when the connection goes down:
- Connect and run a query from SQL developer - Runs fine and its quick as well!
- Monitor connection between the 2 servers - No packet drops!
- Monitor TNSPING to the DB server directly - that works fine too!
I have around 7-8 active universe's and they all contain the same Connection String as parameter. I have also tried creating different connection for different universe's but I think it hardly made a difference.
Any help would be really great.....thanks in advance.

Hi,
Keep it simple if you can reproduce from Universe layer : You want to trace the Universe Designer Client Tool
See Note 1200800 - How to enable tracing for Universe Designer and Desktop Intelligence
also, are you dealing with Webi or DeskI reports downstream?
Consider things like the user used in the universe connection
Check the windows domain account
Check that the Windows environment is seeing the DNS first in the network connections.
Make sure the Windwos environment is part of the same domain.
Regards,
H

Why BIA is not stable after all these years? (old)

Hi all,
We purchased BIA (16GB blades) in 2006, implemented to our production in 2007 with Version 34.
It was a success; the first month BIA was hit 18K times. Today we are seeing about 300K hit a month (we're using 32GB blades with version 49. ). I can assure you that it was(and is)not a plug and play appliance, we have experienced every single BIA error existed on earth. Don't get me wrong; when it works it's an awesome product, I believe in BIA and support it 150%, this is why i am here spending my time.
3 weeks back, we upgraded BIA from Ver 48 to 49. After a week of quiet time, one of my blades went down for no appearent reason, that not only caused an outage for thousands of internal and external customers but wiped out the confidence that I have with the new version 49.
Today, I am "once again" sending apology emails to my users, customers, my boss, CIO etc about the BIA outage. Forget about preventing this to happen in the first place, but I don't understand why it is so hard for you SAP guys to identify the query that crushed the blade(s). I assume your priority is making BIA fancier - such as working on back-up and recovery - instead of making it stable, or at least more monitorable
It is very, very, very frustrating that after all these years that this tool is still not stable, in other words after all the feedback we gave to SAP, after all the times we spent together, we are back to the square one. Think about , would you be keep investigating to a car that keep stopping in the middle of rush hour traffic? So why should you pay hundreds of thousands of dollars for a product that goes down every day?
Anyways, let me know if you know a way to find out what particular query brings down BIA without leaving the trace on 24x7 for days.
Cheers
Tansu
Edited by: tansuaksu on Apr 30, 2009 1:46 PM
Edited by: tansuaksu on Apr 30, 2009 2:01 PM

Tansu,
if you go to Usage -> Acess Statistics in TREXAdmin (Python), not all the columns are populated by default (at least in our case)
Like #unloads, #reads, waittime, #merges, # writes, #plans, input/output, # FEMS among others.
To collect this data, you have to activate additional level of stats.
Go to indexserver.ini for your masterblade. default is set to No. Change it to yes.
[indexusagecollector]
#active = no
active = yes
Unfortunately, there is no documentation available on what each of these values truly represent. So you are left on your own to interpret them as you like.
A discussion in this forum on how you read these numbers would be helpful though.
BIA Stability:
To sum up: BIA has the notion "It rocks when it works" in our company.
Some of biggest issues:
1. There are queries failing that BI team doesn't know about unless users report to us. But users have stopped reporting BIA related failures to us because same query completes successfully after 5 mins (when the temporary memory goes down again). so our users just rerun the quey after sometime rather than reporting it to us. Bottomline - BIA is NOT up 100%. we only know if a query has failed if we go thru the trace files.
2. As Arun mentioned, we too have some queries that dont work at all with BIA due to huge dataset sent back to OLAP. Eventually we had to turn off BIA for those queries.
3. It takes too long for back up to take over. In our case it took 75 mins before back up took over.
we would rather prefer to set a threshold ourselves on when back up should kick in rather than waiting for active blade to go completely down. Unless its a hardware failure (chances of which are pretty slim), back up would always wait for active blade to go completely down. what if an acitve blade is in hung state?
[Re: Automated Failover - can we force backup blade to take over?] discussed here
4. We dont know which query brings BIA down. (that what we are tyring to figure out using the stats mentioned above.)
4. Inverted Data model - we have some cubes which have master data tables bigger than fact tables.
For some, BIA works. For others, aggregates are more effecient. we are still not able to figure out, whats the difference?
[How to relate STEPUID/DMUID in RSDDSTAT_DM to STATUID in RSDDSTATTREXSERV; discussed here
Lets see how Rev 50 addresses our issues.
Thanks,
Saurabh Bansal

Wifi is always not stable even the sign is on after updated to IOS6

After updated to IOS6, Wifi is not stable and always off line even the wifi sign is on. Aslo, the battery is running so fast.
Any advise.

spooky thing this WIFI problem. Coming home yesterday , everything worked OK for a while.
Really hope that APPLE , will respond to this issue, there is a lot of treads and suggestions for repair, but none working for me :-(

Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connetivity issue. My Panasonic Stereo is recognised on Airplay.

Since upgrading to the latest IOS, Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connectivity issue. My Panasonic Stereo is recognised on Airplay.

Hi
I don't know if you're still having this issue but there is a way round it as I'm having the same troubles.
I've just spoken to Apple about it and found out:
– If you have a Mac made before Mid-2011, it doesn't have a piece of hardware needed to take advantage of the 'Airplay mirroring'
– So you can update to a later version 10.6.8+ but this won't help at all
The way round it:
– Download 'Airfoil' and install this
– You can then play music from any defined source (Spotify, Quicktime etc) through your Airplay connected speakers
So sadly, for those have a Mac from before Mid-2011 there's isn't an option that's as easy as Option-click on the sound icon to switch to Airplay speakers.
Hope that helps, I can now get on with the rest of my day now after sorting this out.
Adam

Dialer Outbound not stable

Outbound dialer is not stable and
sometime we have to restart the BaImport (process) in Logger to make it working
We have applied below SR and ES for the Agent /MR PG
ICM 7.0_SR4;CTIOS7.0(0)SR2& ES13/ES25
We have applied below SR and ES for the Agent /MR PG
ICM 7.0_SR4;CTIOS7.0(0)SR2& ES13/ES25
Appreciate to comment and advice regarding any patch we can apply if any one comes across the same

The below error is coming and after i restart the Baimport process, it just work fine with the new records..
Failed to rename or delete the import file for Import Rule Id: 5017; FilePath: d:\tos\CUSTSAT.txt. This Import Rule has been temporarily disabled. To correct this condition: manually remove the import file and disable and re-enable the import rule using Import Configuration Component.
Kindly suggest what to do ?

TS1398 hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls hel

hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls help

At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what?

Airplay not stable (stutters)

Similar Messages

Maybe you are looking for