Airport Card Installation

I am in need of installing the airport card into my imac. I am looking for some instructions. I placed it in the bottom of my computer base and plug in this plug that was available. Please help before I destroy it.....Thank you

nicolina, Welcome to the discussion area!
See KB 58537, iMac (Slot Loading): Installing or replacing an AirPort Card.

Similar Messages

Airport card installation imac g4

hi, folks --
i've got an imac g4 flat panel purchased in 2004 (the half basketball-base model). can i purchase an airport card and install this myself?
thanks.
--adam

Your 1 GHz iMac G4 requires the 802.11b/g AirPort Extreme card. Yes you can install it yourself using the directions at "iMac (17-inch 1GHz) and iMac (USB 2.0): Customer-Installable Parts Instructions".

Apple Quicksilver 933 Airport card installation

I'd like to install a "Airport" wireless card in my old Apple Quicksilver 933 computer.
Are they still available? I have no idea where I would buy one for such an old computer. I believe I purchased it in 2002.
And if I did manage to buy one, would it be easy to install? I'm going to try and find the manual that came with it.... I'd appreciate any info as to where to buy one and how to go about installing the airport card.
Thanks.....

Hi-
Installation is easy:
http://docs.info.apple.com/article.html?artnum=42712
Buy one here:
http://eshop.macsales.com/item/Apple/M7600LLE/

Airport card installation for 2005 Power Mac G5

OK guys, I'm trying to get an airport card to work on my 2005 Power Mac G5. Here's the relevant info:
Power Mac G5 running on Mac OS X 10.4.11
Machine model: PowerMac7,3 (so this would be "early 2005" I guess?)
Airport card: M8881LL/A AirPort Extreme Card
I installed the card as described from the Apple Support site. It seemed to go in fine and I did hook up the antenna wire to the card and an actual antenna is attached to the back of the computer.
When I fired it back up, the computer still can't find the AirPort card. If I open AirPort Setup Assistant (from utilities) it says Airport hardware was not found.
Any chance there is some kind of driver or other missing software I need? Any suggestions?

APPLE WIRELESS AIRPORT EXTREME CARD 802.11g
Apple Model: A1026; M8881LL/A; Part # 661-3045?
Compatible with:
All Apple Products that Accept the Extreme Airport Cards
Such As: iBook G4, iBook G4 (12-inch Late 2004), iBook G4 (Early 2004), iBook G4 (14-inch), iBook G4 (14-inch Early 2004), iBook G4 (14-inch Late 2004), PowerBook G4 (12-inch), PowerBook G4 (12-inch 1.33Ghz), PowerBook G4 (12-inch 1.5Ghz), PowerBook G4 (12-inch DVI), PowerBook G4 (15-inch FW800), PowerBook G4 (15-inch 1.5/1.33GHz),PowerBook G4 (15-inch 1.67/1.5Ghz), eMac (USB 2.0), eMac (ATI Graphics), eMac (2005), AirPort Extreme Base Station, AirPort Extreme Card, Power Mac G4 (FW 800), Power Mac G4 (Mirrored Drive Doors), Power Mac G4 (Mirrored Drive Door 2003), Power Mac G5, POWER Mac G5 (June 2004), Power Mac G5 (Late 2004), Power Mac G5 (Early 2005), Mac mini, iMac G5 (17-inch), iMac (17-inch Flat Panel, 1GHz), iMac G5 (20-inch), iMac (USB 2.0), Etc.
http://tinyurl.com/3ovq734

Airport Card installation and compatability

I had set up my mac with Tiger and I noticed it has no Wi-Fi uses. I want and have to use my Wi-Fi router but I'm unsure if installing a card and using my current router is the ticket.

Do you mean that you have set up your system and subsequently discovered it has no wifi?
if so, and if it is an early G4 Mac mini (2 USB ports on the back - later Intel models have 4 USB ports) then it may be one of the models which was sold with no Airport (Apple's name for wifi) installed. The first minis had it as a build to order, but not as standard.
If it has no Airport hardware inside, you can add wifi by buying an Airport upgrade kit for it, but these are not easy to find and are quite expensive. Alternatively, you might find a USB wifi dongle that works, but this is typically not a reliable way to network systems.

Airport Card/Bluetooth Installation

Hi. Was wondering if anyone could help provide links with easy to understand, clearcut (step by step pics are always nice) instructions on how to install an airport card and bluetooth into my G4 flatpanel? Or, is this something best left to professionals?
I recently bought a new G4 iBook, and since it has the airport card built in, would like to buy a base station and go totally wireless so I can get rid of those pesky wires and move my iMac to another room (with no internet access).
Much, much thanks in advance.
KB1

The directions for installing an AirPort Extreme card in your iMac can be found on www.apple.com/support/imac/g4/doityourself/usb2/.
From what I understand, if I plugged my USB printer into an airport extreme base station, I can print wirelessly - without the need for bluetooth? Is this correct?
Yes that is correct. There is no need for Bluetooth.
For information on how to setup/configure your AirPort Extreme base station (AEBS), visit www.apple.com/support/airport/. On the right side under "Documentation" you will find the "AirPort Extreme Setup Guide" and "Designing AirPort Networks".
To give your iMac Bluetooth abilities, you will need to purchase a USB Bluetooth adapter.

Airport card 1.2.1 does not work with Ibook G3 with OSx.4.2

I just purchased a brand new airport express base station. It seems to be up and running on my G4Imac just fine as a server.
For the client,
I have an ibook G3 and now have OSX.3.4 on it.
I installed my ancient Airport card- 1.2.1 into the Ibook.
I installed the new software from the new Airport base station.
I tried to install the old software from the Airport 1.2.1 card but dont have Classic- so would not install.
Now, the Ibook does not allow me to choose Airport in the Network Preferences section- does not seem to recognize there is a card installed. So, no way to connect to the base station.
My questions:
1.can OS X..3.4 recognize the old Airport 1.2.1?
2. Does the software from the new base station support the old card when used in the client?
3. Do I need different software for the card in the iBook other then the base station software? ie, is there card software that needs to be installed, and if so what is it in system X?
Im trying to figure out if I have a hardward problem- ie the card or slot is not working- or s software problem.
Can anyone help?

MacOS 10.3.x has all the software to use an Airport card already installed. All I would recommend you do is install the Airport 4.1 update provided at:
http://www.apple.com/support/downloads/airport41formacosx.html
The software that ships on the CD that came with the Airport Express is only used to configure an Airport Express. It doesn't provide any software updates for the MacOS itself, nor for the Airport card installed in that Mac.
First thing I suggest you do - run the System Profiler utility on your Mac. See if it identifies that an Airport card is installed. If it does not then recheck the installation of the card - ie pull out the card, then plug it in again and make sure it is fully seated into its socket. Remember to also attach the antenna cable to the card. If the System Profiler still fails to "see" the installed Airport card, then the card itself is likely defective.
[Side note: Airport 1.2.1 was the version of the Airport software required to provide software support for the card in ancient MacOS versions. Airport 1.2.1 is not actually installed on the Airport card itself, so if you install an original Airport card into another Mac it makes no difference what Airport version was installed on the Mac the card was pulled from.]

Airport card for my g4 adp tower... I can't get it to work.

I'm not very good with computers (when it comes to technical support). And I recently purchased an original airport card for my computer. I also burned the downloads onto a disc so that I would have the software. My computer has an operating system of 10.3.5. I downloaded the driver, turned off my computer, insterted the card and it pops up with an error that says it can't find the airport base station. What is this and do I need to buy something else for my computer? My internet connection is Comcast wireless. Any suggestions, thoughts or opinions would be greatly appreciated. Thanks for taking the time to read through a computer illiterates post...

It sounds like you are trying to run either the Airport Setup Assistant or the Airport Admin Utility - and since this software is only of use to Airport Base Station owners (which you are not) this software is of no use to you.
If your Airport card has been properly installed, you will see a fan-shaped icon near the right side of the MacOS menu bar - that is the Airport menu. Click on it, and a list of all in-range wireless networks will appear. The name of the wireless router supplied by Comcast should appear there - click on that name to connect to it. With some luck you will now get an internet connection.
If there are no wireless networks displayed when you click on the Airport menu, recheck the installation of your Airport card - you probably forgot to attach the internal Airport antenna cable to its connector on the Airport card.

Kernel panic / Internet access with a bad AirPort card

My iBook G4 started suffering kernel panics just over a week ago. They have rapidly increased in frequency to the extent that it can take several attempts to boot up because they have started occurring during the boot up process (originally they occurred after the iBook had been on for a while).
I've looked through the forum and have seen that there seem to be some common causes -RAM, AirPort card, or something to do with the HD. I ran disk utility on the HD and it didn't find any problems and I also successfully ran the 'repair disk permissions'. I have tried taking out the RAM -that didn't do anything. The kernel panic does frequently occur when I am either using Mail or Safari, but as I've said, it also occurs when I'm booting up -does the fact that it happens when I boot up mean that it cannot be the AirPort card (which incidentally is not under the keyboard -so it must be inside)?
Earlier today I switched off AirPort and was able to work on the computer for almost three hours without any kernel panic (but also without internet access). Less than a minute after switching it back on, it froze again.
If this does mean that the problem is with the AirPort card, I have a question about internet access. I use the iBook on a wireless network that stems from a modem with a Mac downstairs and I do not have any internet cables, or a phone line, in the room where the iBook is used. Is it possible to use something like AirPort Express even with a bad AirPort card? And does AirPort Express connect to the iBook, or to the main modem downstairs?
Apologies for so many questions and many thanks for any help you are able to give -this has been driving me around the bend for the past week?

Update:
An acquaintance who works for Apple suggested that before assuming that the problem was the AirPort card / buying further equipment, I should boot up with the original installation disk in and use the disk utility function to 'repair disk'. I did that and got a 'Volume Header needs minor repair' message. It repaired that & I restarted the iBook. I was able to do an update back-up to my external hard drive & all was fine until I switched AirPort back on -there was an instant kernel panic.
I figured that it couldn't hurt to run the Apple Hardware Test -did that and restarted again. Was able to open Mail (AirPort was on) but then the AirPort connection disappeared and the pointer froze, but there was no kernel panic screen. I had to force quit -restarted again. This time I was able to use Mail, downloaded a song on iTunes, and was on the internet for about 45mins before the connection disappeared and the pointer froze again. I could force quit the app but with a frozen pointer I ended up having to force quit again.
I waited a while and then booted up again (without problem) but this time I was told that there was no Airport card present! Shut down and reran the Hardware Test (which said that AirPort 'Passed'). When I restarted AirPort was briefly there but disappeared when I opened AirPort Utility and at this point the pointer also froze. I did force quit to get out of the app and then there was a kernel panic. Is this now pretty conclusive that the AirPort card is the problem?
I would appreciate any feedback -I've had a very frustrating week with this.
Thanks.

"No airport card installed" only in swedish mode?

Hi all, got this problem with my Macbook pro!
Recently when I was reconfiguring my wifi-network (assigning my time capsule as main router and the modem I got from my ISP as a "bridge"), I noticed that my airport card was acting strange.
The problem is that it says "No airport card installed", but I still got internet connection and can surf/download stuff without a problem. Also, when I go into "System preferences/Network" I can see my airport connection and turn it on/off. Although when I click "Advanced" nothing happens.
I've tried several things but none seems to work, and I'm not sure its an hardware issue. Anyway, this is what I've tried:
1. Rebooting (several times) = Didn't work
2. Resetting PRAM and NVRAM = Didn't work
3. SMC-reset = Didn't work
4. Rebooting into Windows XP via bootcamp = Airport card detected and working just fine
5. Restoring older save via time capsule = Didn't work
6. Format and reinstall Snow leopard and restore older save via time capsule = Didn't work
7. Format and reinstall Snow leopard (again) = Didn't work...-ish?
Now, here's the strange bit. As I log in to a new account with english as main language I notice that the wifi-icon on the top dashboard now is filled (it was greyed out and only said "No airport card installed [in swedish ofc]) and I can now click it, change network and all that stuff. Although, when I go to "System preferences/Language & text" and change my preferred language to swedish and log out & in, the same problem occurs (greyed out wifi-logo, no airport card installed etc.)
So, I'm totally confused. Halp?

Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help Reinstall the OS.
If that doesn't do it, the card has likely died.

How do I install an Airport card on a G3?

I bought this Powerbook G3 a while ago, with only Ethernet connection, and I finally broke down and bought an Airport card, after trying some of the other stuff! I have the card 90% into the slot on the left back side of my Powerbook but how do you get it all the way in? Without a hammer? LOL It came with an install disc but it says, "you cannot install Airport on this volume (my Macintosh HD). Your Airport software is currently up to date" but in System Profiler "No information found" under Airport card?
My Imac I'm waiting on reinstall discs, from Apple, the 'book hasn't froze in at least 2 - 3 weeks! I have music playing on that I want to migrate here!
Thanks, Willy

WillyBlues,
Please identify your powerbook G3:
http://docs.info.apple.com/article.html?artnum=24604
If you have the Powerbook G3 FireWire M7572 "Pismo", there is an original AirPort card available, but it installs ONLY under the keyboard, not the PCMCIA/CardBus slot on the left side of the 'book, plus it works only in the Pismo. Here is what it looks like and how it is installed:
http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=10061
http://docs.info.apple.com/article.html?artnum=58581
If you have a WiFi PC card, please identify the card and software in addition to what version software you are using.
The PC card on the left side will always extend beyond the frame about 1". You should feel resistance in the last 1" of travel, then you may have to push hard to fully seat it. A PC card icon will then appear in the menu bar. It's possible the PC card slot is in the locked position; read this article on how the slot works.
http://docs.info.apple.com/article.html?artnum=16167

How do i know an airport card is installed & not working or not installed?

My Mac details are:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
I've always just connected to the internet via an ethernet cable to my router/modem, but now I don't want the long cord going from the phone line to the office within the house. I have a Airport Express and was wondering if I could set this up in the lounge and connect my computer/laptop/stereo etc.
To do this do I need to have an airport card installed. If so, which one and are they easy to instal?
Appreciate any help.
Cheers
Message was edited by: mindgrind

If you remove the side door and look down at the mother board, you can observe if the airport card is there. You can also use ASP . There are kits for the bluetooth and airport card available. Installation is not difficult. The difficult part is finding the connector wires. these are tucked at the top border of the mother board. The other issue is which lead goes to which connector. You can find the answer on the internet, just Google it.
Bottom line on the original Mac Pro the wireless reliability with that card is short range. Must have not too much interference.

Installed airport card into my imac G4 flat panel and now it work

I purchased an airport card from Mac-pro as Apple does not sell them anymore. I installed it into my IMAC G4 flat panel as per the instructions. Now, when I turn on the computer the power light comes on, and the screen is black and it really isn't making any noise, as though it is not starting up. It was working just fine before I installed this card!!!! can anyone help??!?!?!?!?

The following Apple article provides the details of
installing an AirPort card in the Flat Panel iMac
G4s. You may want to double-check it to see if you
might have missed something in the the installation
process.
I installed the card properly, as per the instructions you forwarded to me. I did have some trouble getting the card to completly fit into place, one side seemed to go in easier than the other, but it did go in. Is there anyway to get this machine up and running again?

"No Airport card installed" after 10.5.8 update

Just upgraded the latest Leopard update 10.5.8 and, after restart, the Airport icon in my menu bar says "No Airport card installed".
I've been into System Prefs and tried to switch it on, but nothing. I've even been into the system profiler and, when I look under Network > Airport card it says no information found.
I'm on a two-week-old 13" MacBook Pro, which has been working fine with its Time Capsule since it was bought.
Cheers in advance.

HI,
Try the 10.5.8 combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
As with any installation, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that. Any help on how to fix this? How do I know if it is the airport card or not?

MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
Any help on how to fix this? How do I know if it is the airport card or not?
is there anything else I can try first?
thanks

If the technician at the shop is competent, he has given you a diagnosis that should have identified the problem. You could run the Apple Hardware Test to verify the findings:
https://support.apple.com/en-us/HT201257
Note the Apple Hardware Test is not definitive.
Go to the iFixit.com and Powerbookmedic.com web sites. They have parts and installation instructions. To install an Airport card is fairly easy.
Ciao.

Airport Card Installation

Similar Messages

Maybe you are looking for