Airport Express Extends 5GHz at 2.4GHz?

My second generation(802.11n) Airport Express extends my 5GHz network, Net5, at 2.4 GHz. The express is about 20
feet from its "target," an iPad 3 serving as an internet radio. I know this because a scan turned up the 5GHz network on the same
channel as the 2.4GHz one and identified as "Net5."
As far as I can tell, all my settings are correct, etc. I'd be grateful for any ideas, comments, etc.

Ok, thanks for clarifying that for me. By default, the 2nd generation Express should extend both radios of your 5th generation Extreme. The key is placement. As you are already aware the range of the 2.4 Ghz band is greater than that of the 5 GHz one.
Even if you have the Express within 20 feet of the Extreme there may be some form of Wi-Fi interference (like walls) that may be preventing the 5 GHz band to be extended properly.
To rule out a possible placement issue, please check out the following AirPort User Tip for details on how to best place your base stations.

Similar Messages

Airport Express only broadcasts either 2.4ghz OR 5ghz at any one time?

Hi folks...here's hoping someone can help. I've searched high and low, but have not been able to find the answer.
I just got an Airport Express and successfully set it up to extend my existing network (from an Airport Extreme Base Station). However, it seems to be only extending the 2.4GHz signal. When I look at the set-up in Airport Utility, it seems that I would have to select either the 2.4GHz OR the 5GHz...it can't seem to broadcast both signals (unlike the Airport Extreme)
Does the airport express only broadcast either 2.4ghz OR 5ghz at any one time?

Does the airport express only broadcast either 2.4ghz OR 5ghz at any one time?
Yes. If you have the AirPort Express set to "extend a wireless network", it will extend either the 2.4 GHz or 5 GHz band, but not both. The AirPort Express is dual band in a sense that it can handle 2.4 GHz or 5 GHz signals. But, it can't do this simultaneously.
The Express extends the band that it "sees" with the strongest signal, which will be the 2.4 GHz band in most cases because 5 GHz signals are weaker and do not penetrate obstructions or travel over distance as well as 2.4 GHz signals.
If you want to extend both the 2.4 GHz and 5 GHz bands, you'll need another AirPort Express, or a simultaneous dual band AirPort Extreme would do the trick as well.

Airport express extending - n AND g

I have an airport express extending a dual band airport extreme network. The extreme has one band on n (for laptops) and one band on a/g (for iphones and an older laptop). The airport express extends the network, connecting wirelessly to the extreme in another room, and sharing its connection with an iphone and an old laptop.
My question is this: will the airport express connect with the airport extreme (receiving its internet connection) at n speeds, but then connect with my iphone and old laptop (sharing its internet) at a/g speeds? I know the express is not dual band and thus cannot share its connection on different bands, but can it connect on a different band than it shares?
Thanks!

From what I've tried the Airport Express will only extend as it connects to. I've tried and it doesn't seem to "auto-convert" from one to another.
Also, you might want to look at the 802.11n 5ghz and 802.11n b/g/n 2.4ghz. Set this in your Airport Extreme accordingly (which you already might have), and let Airport Express automatically extend the 802.11n b/g/n 2.4ghz. This way, the iPhone will connect as fast as it can and the older laptop can connect.
BTW here is my "poor man's dual band" setup if anyone's interested:
DSL modem is connected to Netcomm 802.11b/g/n wireless router. This supplies the 802.11b/g/ 2.4ghz N signal for iPhone, Xbox360, and anything else.
Then, I connect via ethernet from Netcomm wireless router to my existing Airport Express. Airport Express supplies a pure 802.11 5ghz N signal for my Mac, iPad2, new iPad and AppleTV.
This way, the Mac, iPads and AppleTV always "see" only the Airport Express network, hence WiFi iTunes syncing as well as AirPlay streaming is great, and the 5ghz network with maximum N speed doesn't suffer interference and/or dropouts such as when my microwave is running.
As for the iPhone, I'll just use a cable when I need to, but this way my iPhone and Xbox360 can access the Internet as needed without degrading the connectivity of the Mac, iPads and AppleTV. I don't play online games, I only need connectivity to update or download stuff on Xbox360.
Yes, the disadvantage is double-NAT, but I haven't encountered issues yet.

Airport Express extends 5 Ghz and 2.4 Ghz or just one at a time?

I recently switched my dual band Time Capsule to use different names for the 5 Ghz and 2.4 Ghz networks.
Will the Airport Express extend both or just one at a time, if so, which one will it extend?
I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
All are running the most recent firmware version.

Welcome to the discussion area, Mike!
Will the Airport Express extend both or just one at a time, if so, which one will it extend?
The AirPort Express is a single band device, so it can extend either the 2.4 GHz or 5 GHz band, +but not both at the same time+. Since you have different names for the 5 GHz and 2.4 GHz bands, the Express will extend the 2.4 GHz band by default. Using AirPort Utility, the setup application for the AirPorts, it is possible to configure the AirPort Express to extend either band.
If you are perhaps thinking of extending the 5 GHz band, this can be a bit tricky because 5 GHZ signals do not travel effectively over distance or penetrate obstructions as well as 2.4 GHz signals. You almost have to have a line-of-sight relationship between the Time Capsule and the AirPort Express to be able to extend the 5 GHz band.
I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
Look on the side of the AirPort Express for the model number in the small print. You'll need Model No A 1264 to be able to "extend". If you have the older Model No A 1084, that version will not be able to "extend" a wireless network, but you could use it to "join" the wireless network and stream AirTunes to the device.
All are running the most recent firmware version.
That would be 7.5.2. If you have the older version of the AirPort Express, the latest firmware version for that device would be 6.3.
Message was edited by: Bob Timmons

Do I have to use airport extreme to be a main network if I want to use Airport express extend my wifi range

Do I have to use airport extreme to be a main network if I want to use Airport express extend my wifi range.

You cannot extend wifi from a different brand router..
Only apple to apple.
But the apple router does not have to be the main router.. it can be in bridge.. as long as it is creating a wireless network it will work fine.

Problem with airport express extending wifi from extreme

My setup is an airport extreme wired to the internet with two iMacs connected by wire and an airport express to extend wifi from the extreme to the further parts of my house. When originally installed about a year ago this arrangement worked perfectly, but I noticed a few weeks ago that neither my iphone, ipad, nor my MBP 13" is connecting to the aitport express anymore and the network extension is not working as intended.
Last night I investigated the isue and found that the express is connected wirelessly to my extreme because when I wired my MBP to the express and turned off the wireless connection it could still reach the internet. But, even with the express sitting plugged in next to my iPhone I could not get it to connect to the express - it always uses the extreme and while I'm in range there is no problem. The problem is that my house is old and the wals tend to cause problems with reception and I can't get wifi in the garden and some parts of the house.
I have the express and the extreme configured to allow access only by the client macs that I have provided and it looks like the two devices share this information when they are in extend mode (but not sure about that). When I set up the system I added the aitports mac addresses to the approved list in the access control screen, which seemed to be necessary then though I removed them (the airport mac addresses) fromt he list last night to see what effect this had and biefly the airport did connect to my MBP. But after returning it to its location where it usually is I have not been able to reconnect to it.
In brief; I have an airport express extending an airport extreme wifi, it used to work, but now all wifi clients will only connect to the master. I have a suspicion that a recent airport update has caused this (both airports are up-to-date) but can't be sure. I have the express correctly configured to extend the wifi of the extreme as it was originally working.
One thing I have noticed - I had the express set to use a fixed IP by setting 'static' in the internet screen - this is not the current setting (it's reverted to DHCP) and I cannot force it to update to and remain set to static.
Does anyone know how I can restore the correct functioning of the express as an extension of the wifi network?
Thanks
Damon

Perform the Factory Default Reset one more time. Hold the reset button until the amber light has been blinking rapidly for 8-10 seconds before you release the reset button
Run the setup wizard, and wait for screen similar to this to appear, then click on Other Options:
Select the Add to an existing network option, then click Next and follow the prompts.
If you are still having difficulty, try running the setup utility on an iPhone or iPad, since Yosemite has a number of bugs in the setup process.

Iphone will not connect to airport express extended network - macbook and ipad will - Help

Iphone will not connect to airport express extended network - macbook and ipad will without problems.
iphone will connect to base station no problems, I've restored settings and started again but still the same, the iphone picked up the network for the last couple of months, but not now ?

I'm having the same issue. My AExpress used to give a good signal strength on the far side of the house extending he network created by my Extreme. However, I've noticed lately that my iPhone does not receive the same strong signal it once did. AE has a green light, I've rebooted it, and my Extreme but there is no change in signal strength. Other than the green light, how can I tell if the Express is working if I don't get a good network signal?

Airport express extending wifi extremely slow

Hello,
I have a time capsule creating a wireless network and a airport express extending the wireless network.
When I'm connected to the time capsule I have around 12mbp of speed but when I am connected to the airport express I have around 0.2mbp
In the airport utility it says the connection is good she connected to the airport express.
Everything was working fine a few days ago.
I was reading the the forum that it may be interference from a neighbour and to change the channel but I can fine where to change the channel.
Is changing the channel the solution? How can I access where to change the channel?
Or is there another solution?
Anyone knows how to fix this speed problem in airport express?
Cheers
Francisco

What is the distance between the Time Capsule (TC) and the AirPort Express Base Station (AX)? Are they in the same room, different room, different floor from each other? If in different rooms/floors, what is the basic building material used in the walls/floors/ceilings?
It is important to understand that the AX can only extend the TC's wireless network at the same bandwidth that it receives it. If you are only getting around .2 Mbps at the AX, then either there is too much distance between routers or there is some form of Wi-Fi interference (other Wi-Fis or the builiding material) between them that is preventing the AX from getting a strong enough signal to extend.
Changing channels is one possible solution. You would do so using the AirPort Utility. If you are using version 5.x of that utility, you would change channels as follows: AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless tab > Channel. By default Channel is set to "Automatic." Click on the up/down arrow to the right of the Channel window to get the other channel options.
If this doesn't resolve the problem, please check out the following AirPort User Tip for details on how to best place each base station for maximum bandwidth in an extended network.

Time Capsule & Airport Express Extended Network loses connection!

OK, so I am an Apple virgin of 2 months experience, after many many years with Windows based PCs, so please be patient and gentle with me. Sorry about the long explanation.....
My set-up comprises of a Time Capsule, which is connected to the Internet via a NetGear ASDL modem. Both pieces of equipment are situated in my wife's office on the first floor of our house. My office is on the ground floor, where I have a 27" iMac and an Airport Express which is connected to a printer via the USB port. The Airport Express is sited about 10 feet from the iMac.
All software and firmware are lastest versions - TC v7.5, AX v7.4.2 & Airport Utility v5.5.
For the past 2 months, I have only been using the AX to print wirelessly and the set-up has worked faultlessly.
Earlier this week, I decided change the configuration to extend the network to allow me to use my laptop & iPhone in areas of the ground floor where I had no signal. I followed the online instructions and first changed the TC to check the box to 'allow this network to be extended', after updating the configuration successfully I moved to the AX. Here I changed the wireless mode to 'Extend a wireless network', selected the network name and checked the 'Allow wireless clients' box. This also updated successfully.
Everything ran correctly and the range of the network was greatly increased.......great, job done...not!
After about 3 hours the iMac lost the connection and the TC disappeared from the Airport Utility pane and refused to reappear. I checked but also couldn't connect or see any network on the laptop or iPhone, so have dismissed a fault with the iMac. I finally got things back up after doing a power reset of the TC, but after a few hours same problem occurred, and occurred and occurred. By clicking the Airport Utility icon on the top right of the screen and following the prompts from 'no Internet connection', I can at least get things up and working without a power reset of the TC, but the connection still drops after 2-5 hours each time.
My first call to Apple Support led to a full reset and re-config of both the TC and AX, setting the extended network up as I had done originally. The only difference was an iMac reset (alt/cmd P&R on power up) and changing the 2.4Ghz channel from 1 to 11. This had no affect and the connection drop-out problem continued.
My second call to Apple Support led to me being passed to a Level 2 Techie, who first suggested that I tried disabling the Guest Network - tried it, and it made no difference. I was then told to try a WDS network, which whilst not losing connection, is slower and has less range than the original extended network and frankly sounds a cop-out.
Has anyone had a similar problem, anyone solved the problems, can anyone offer any help or advice please.. I'd appreciate any input....thanks.

Similar problem here. Cable Modem (Moto SB6120)->AEBS (802.11n dual-band)>AX (802.11n) for wireless connection to MacBook Pro running Mac OS X 10.6.2. AEBS configured as dual-band: 801.11a/n at 5GHZ and 801.11b/g/n at 2.4 GHZ. AX configured to wirelessly extend the AEBS 5GHz 802.11a/n network. I am able to run on the extended 5GHz network (via AX) for varying lengths of time, until the internet connection dies. When this occurs, I am able to switch over to the 2.4GHz network to get back online. Solution up until now has been to unplug the AX, then plug it back in. After the AX restarts, I am able to hop back onto its 5GHz signal and get to the internet. However, the internet connection on this band will drop again after some time.
I was on the phone with Apple Support twice in the past week to get this resolved, but no joy. Senior Advisor seemed to think that my AX was working properly, and that that the problem could be with my AEBS -- perhaps the 5GHz antenna might be bad in my AEBS? Seems odd to me, since both my AEBS and AX are less than 2 months old...
I just read the post from LocoDoc and decided to see if I could replicate the problem. Sure enough, when I am connected to the internet via my AX extended 5GHz network signal and a Time Machine backup starts, the internet connection quits. Only recourse is to restart the AX. Note that I do not experience this problem with Time Machine while connected wirelessly straight to the AEBS 5GHz signal. Only when I am connected to the "extended" signal via the AX.

Can you make Airport Express go 5Ghz?

Hi all,
I am using FIOS at my house that runs through a Verizon router to my Airport Extreme that broadcasts wirelessly. I have also installed a Airport Express in an adjoining room to extend the network as well as to play music via Itunes.
When I am in the room with the Extreme, I get a strong signal at 5GHz. But when I am in the adjoining room I get a strong signal at 2.4GHz. I assume this is coming from the Express. My question is this; Can I set up the Express to go to 5GHz?

The issue is primarily due to the physical properties of higher vs. lower RF frequencies. The higher frequencies offer better bandwidth with a trade-off of range. In practice, the 5 GHz network is typically only useable in the same room as the wireless router providing it. It you want to provide 5 GHz networks in adjourning rooms, you may want to consider setting up a roaming network.
You can "force" the Express to extend the Extreme's 5 GHz radio, only if the following are true:
The Express must be within range of the Extreme's 5 GHz network.
The Extreme's 5 GHz network would need to have a separate Network Name.

Macmini sharing - airport express extending?

I've set up my macmini to act as a base station through network sharing. But now my airport express won't allow me to run airtunes. I've tried to get the airport express to pick up the macmini network in client mode but it just says it can't find a base station. When I try and use it for airtunes it tells me that the airport in my macmini is in use and to turn it off.
Is there a way to get the express to extend the wireless network created by the macmini? Or to get my airtunes to work whilst the macmini is a base station?
hope that makes sense! I've searched far and wide...

From what I've tried the Airport Express will only extend as it connects to. I've tried and it doesn't seem to "auto-convert" from one to another.
Also, you might want to look at the 802.11n 5ghz and 802.11n b/g/n 2.4ghz. Set this in your Airport Extreme accordingly (which you already might have), and let Airport Express automatically extend the 802.11n b/g/n 2.4ghz. This way, the iPhone will connect as fast as it can and the older laptop can connect.
BTW here is my "poor man's dual band" setup if anyone's interested:
DSL modem is connected to Netcomm 802.11b/g/n wireless router. This supplies the 802.11b/g/ 2.4ghz N signal for iPhone, Xbox360, and anything else.
Then, I connect via ethernet from Netcomm wireless router to my existing Airport Express. Airport Express supplies a pure 802.11 5ghz N signal for my Mac, iPad2, new iPad and AppleTV.
This way, the Mac, iPads and AppleTV always "see" only the Airport Express network, hence WiFi iTunes syncing as well as AirPlay streaming is great, and the 5ghz network with maximum N speed doesn't suffer interference and/or dropouts such as when my microwave is running.
As for the iPhone, I'll just use a cable when I need to, but this way my iPhone and Xbox360 can access the Internet as needed without degrading the connectivity of the Mac, iPads and AppleTV. I don't play online games, I only need connectivity to update or download stuff on Xbox360.
Yes, the disadvantage is double-NAT, but I haven't encountered issues yet.

Time Capsule + AIrport express extended mode, poor usability

Hello all:
I have a TC(late 2009 model) and airport express(wireless N model) that acts as extended network of the TC. Right where the airport express is located the internet signal/reception is good, but if I move away 20 feet from the airport express, my internet goes terrible slow. Not sure why, but I just followed the steps on the wizard to set this up.
Any ideas?

Similar problem here. Cable Modem (Moto SB6120)->AEBS (802.11n dual-band)>AX (802.11n) for wireless connection to MacBook Pro running Mac OS X 10.6.2. AEBS configured as dual-band: 801.11a/n at 5GHZ and 801.11b/g/n at 2.4 GHZ. AX configured to wirelessly extend the AEBS 5GHz 802.11a/n network. I am able to run on the extended 5GHz network (via AX) for varying lengths of time, until the internet connection dies. When this occurs, I am able to switch over to the 2.4GHz network to get back online. Solution up until now has been to unplug the AX, then plug it back in. After the AX restarts, I am able to hop back onto its 5GHz signal and get to the internet. However, the internet connection on this band will drop again after some time.
I was on the phone with Apple Support twice in the past week to get this resolved, but no joy. Senior Advisor seemed to think that my AX was working properly, and that that the problem could be with my AEBS -- perhaps the 5GHz antenna might be bad in my AEBS? Seems odd to me, since both my AEBS and AX are less than 2 months old...
I just read the post from LocoDoc and decided to see if I could replicate the problem. Sure enough, when I am connected to the internet via my AX extended 5GHz network signal and a Time Machine backup starts, the internet connection quits. Only recourse is to restart the AX. Note that I do not experience this problem with Time Machine while connected wirelessly straight to the AEBS 5GHz signal. Only when I am connected to the "extended" signal via the AX.

Extreme + Express = separate 5Ghz and 2.4Ghz networks ...

I have an Extreme and an Express.
If I set up the Extreme for 802.11n (5Ghz) clients only, how do I setup the Express to handle the 802.11g/b (2.4Ghz) clients?
Specifically, if you're using an 802.11n computer, wouldn't it be possible for it to connect to the Express (2.4Ghz) accidently? How do I ensure that the 802.11n capable computers ONLY connect to the Extreme?
My place is only 1000sq ft. so should I just plug in the Express to the Extreme via ethernet? Or set up a WDS?

Specifically, if you're using an 802.11n computer, wouldn't it be possible for it to connect to the Express (2.4Ghz) accidently?
Give your 5 GHz and 2.4 GHz networks different names and different wireless encryption passwords.
My place is only 1000sq ft. so should I just plug in the Express to the Extreme via ethernet? Or set up a WDS?
If you connect the AirPort Express (AX) to the AirPort Extreme base station (AEBS) using WDS the wireless bandwidth will drop to half of 802.11g. If you want the AEBS to operate at 802.11n speeds, you will want to connect the AX to the AEBS via Ethernet.

AirPort Express Extend Wireless Networks (Multiple)

I've got an AirPort Extreme with these wireless networks:
AirPort Network
AirPort Network 5GHz
AirPort Guest Network
I've also got an AirPort Express which I would like to extend these wireless networks with (at least the first two), however the settings only allow me to select one of these wireless network.
I considered connecting the two AirPorts via ethernet, but then thought the two wireless networks would likely clash?
If anyone could advice me as to what I should do, that would be perfect, many thanks.

I've also got an AirPort Express which I would like to extend these wireless networks with (at least the first two), however the settings only allow me to select one of these wireless network.
If you have a "new" AirPort Express with dual band wireless capability, it will both bands using wireless only if you use the same wireless network name for both the 2.4 GHz and 5 GHz network on the main AirPort Extreme.
The Guest Network cannot be extended.
If you do have the option to connect the AirPort Express using Ethernet, it can certainly be configured to provide more wireless coverage that way. The networks will not "clash".

Airport Express 802.11n only 2.4GHZ setting

I'm bit puzzled..I just configured my Airport Express with 802.11n only 2.4GHZ -setting and another Airport Express to extend the network, yet my old MacMini is still able to use the new setup WiFi connection even tough it only supports only 802.11a/b/g.
Could it be that the 2nd AE actually extends the network with 802.11a/b/g/n support? Other possibility is that 802.11n only 2.4GHZ -setting is not really taken as config by the main AE despite Airport Utility shows it as such.
Ideas ? Comments ?

Addtional info both AE's now have ver 7.5.2 installed, prior it was 7.6 and situation is still the same.

Airport Express Extends 5GHz at 2.4GHz?

Similar Messages

Maybe you are looking for