Airport Express & Netgear DG834G 54Mbps Wireless ADSL Modem Router

Could you offer any advice as to whether an Airport Express could be used as a range extender for an existing Netgear DG834G 54Mbps Wireless ADSL Modem Router setup as I really like the idea of Airtunes and sharing a USB printer. I gather that it is possible to use an Airport Express to extend the range of an Airport Extreme basestation setup but have not been successful in finding any info regarding the Netgear.
Any info gratefully received !
G5 Dual 2.3Ghz Mac OS X (10.4.6)

mac-junkie, Welcome to the discussion area!
No it can not be used as a range extender.
But you can still use it for music and printer support. See KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Similar Messages

Netgear DG834G V2 WIRELESS ADSL Router/newbie

Hello Everyone,
I have just signed up to eclipse to get broadband.
I have wanted to go wireless so I picked the
Netgear DG834G V2 WIRELESS ADSL Router
This needs to work with Both my PC (Medion/Intel Pentium 4E, 3200 MHz)
and my Mac (G4 400Mhz OSX) (at the moment they are connected by an ethernet lead).
Not knowing that Netgear Router doesnt support
Mac wirelessly but for the pc you can use
Netgear 802.11G WIRELESS USB Adapter – WG111
So my problem is what can I use with this
router so I can use it wirelessly with my Mac
At the netgear forums I was told I would have to get
a network adapter is this correct?
please help...
http://www.eclipse.net.uk/index.cfm?id=broadbandhardware_res
L I S T E R

As Donald said, an AirPort Extreme card will not work in your G4 400 MHz.
If your G4 400 MHz is a very early model based on the Yikes! architecture, it does not have any internal slot.
If your G4 400 MHz is based on the Sawtooth architecture, it has a slot for the original AirPort card.
You can use the information in KB 58418, Power Mac G4: How to Differentiate Between Models to determine which Power Mac G4 you have.
If your Power Mac G4 doesn't have an internal slot or if you can't get an original AirPort card, I would suggest either a Mac compatible PCI wireless card or an Ethernet wireless adapter. The Ethernet wireless adapter does not require any drivers and therefore will work with any Ethernet device regardless of OS.
Unlike Donald I do not recommend any USB wireless adapters. These require drivers that must match the version of Mac OS that you are using. Frequently these drivers are incompatible with OS X and other software installed on the Mac. Many people have tried them and given up.

Which wireless adsl modem router???

I am completely confused by the various products and descriptions out there. My current G4 iMac is wired into D-link ADSL modem and I now have a G4 iBook and a MacBook and a Dell Inspiron XP wireless laptop in the house.
I am looking for a wireless modem router or router, which will be compatible with all above and be very easy to set up without too much technical ability. I understand that the Apple Airport Extreme base station has been withdrawn and so I have been looking at something like Netgear DG834G.
I would also like my Epson 1520 printer to be connected via USB to the router, as it was available on the Apple base station.
Can anyone help me.
Thanks
Desmond
imac G4 Mac OS X (10.4.7) D-Link ADSL modem

A simple solution if your D-Link has more than one LAN port is to get an Airport Express.
The G4 iMac and Airport Express would be connected to the LAN ports, you could then use your printer.
Check out the following website.
Reviews of equipment
http://www.adslguide.org.uk/reviews/
iFelix

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

Airport Express for stereo / Belkin Wireless G Plus Router/

Quicksilver G4 using Ethernet connection directly to Belkin Wireless G Plus
Router . Airport Express working remotely via router to stream audio to
loudspeakers. Was able to choose (from iTunes window) whether to play thru
computer speaker (1) or remote speakers (2)
Problem: I temporarily disconnected the Airport Extreme unit. No options now... can only play thru computer. iTunes no longer
shows a dropdown selection option to stream to remote speakers.
Have reset Airport Express. Have used Airport Setup to re-install....have
done this using both a laptop G-4 (successfully to be able to a/b select
either computer speaker or streaming to remote) but when trying to do
the same re-install from the G-4 Quicksilver.... and getting a message that
the installation was successful.... iTunes streaming network signal doesn't show up in the Quicksilver menu bar AND neither is there an option to select
streaming to remote speakers.
Other manipulation tried: disconnected cable modem, reconnected to
"reset" the modem. Other observation: the Airport Express indicator
is steadily green.
I hope this makes enough sense that someone like Tessarex can suggest
a solution to enable iTunes streaming with the G-4 Quicksilver, via the
wireless Belkin router to the Airport Express and stereo. (I don't want to
have to resort to using my wife's laptop to initiate

With your QuickSilver G4 connected via Ethernet to the Belkin router, you should be able to stream iTunes to the AirPort Express Base Station (AX) by joining the Belkin's wireless network as a wireless client.
Try the following...
To set up AirTunes on the AirPort Express Base Station (AX), temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select the existing wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (checked)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

Recommend me wireless ADSL modem router which supports IPv6

As the topic says. My previous device broke up contract with me and since my ISP supports IPv6 (at least in theory) I'd like to set up IPv6 network at home.
Thanks...

I did not mean to imply that Netopia was the only maker, you asked for a combo wireless router and ADSL modem; that was what came to mind.
IPv6 is has not been finalized and there are still many other aspects of the protocol that need to be finished before it is just dumped into the public. Also you need to think about the scale that we are dealing with when we are talking about changing from IPv4 to v6. There are not too many things between the two that are similar. Remember that the reason for IPv6 is not because its a newer thing, it is because we are running out of v4 addresses, but in the PUBLIC realm. Internally even large companies have an abundant of addresses using the private ranges such as 10.1.x.x; 172.16.x.x and 192.168.x.x for each class A,B,C respectively. The great advantage if v6 is that we will no longer have to use NAT, which can be problematic depending on how it is implemented. Right now when IPv6 is used it is actually being NATed from IPv6 to v4, and believe it or not that is what you will end up doing if you make your internal network v6. So you see there is no reason for any mfg. to hype IPv6 when it is still a mute point. We will start seeing more and more IPv6 within the next couple or years and once more large corporations begin to implement and are used to work out all of the kinks will we start seeing packaging hyping v6.

Netgear Wireless ADSL Modem Router

I am able to easily connect my Windows based laptop to the Internet, but am having problems using my Imac wirelessly.
When I go Open Internet Connection, the Airport frame status shows "Connected to "billcarolinternet42", signal level maximum ..... but
the computer doesn't seem to be connected to the Internet!
Please help, as my mother is getting tired of Ethernet cable!!
thanks Bill

Check points:
iMac has correct network name and password?
iMac is set to 'use DHCP' and has obtained IP number from the router?
Has the router been set to accept only specific MAC addresses (MAC is nothing to do with Macs, it's a unique number allocated to every ethernet or wireless card)? If so has your iMac's MAC address been intered?

Problems reconfiguring ADSL modem+router to modem only

I've currently got the Netgear DG834G working as a modem+router and connected to the AEBS which is in bridge mode.
I want to use the AEBS as the router. I've discovered how to set the DG834G to modem only, but I cannot get the internet connection working like this. It connects using PPPoA. It asks me for a LAN IP address.
I'm not sure what I should be entering on the AEBS. In Airport Utility, under Internet, I have connect using Ethernet, IP address as the static IP address given to me by my ISP, for subnet mask I've entered 255.255.255.0, for router address I didn't know what to enter, and I've tried using the same as the static IP address, also tried a slight variation on that (increased the last value), I've tried using the IP address of the modem, but nothing has helped. The DNS server settings I've entered are those provided by my ISP. For connection sharing, I've set it to Share a Public IP address. NAT is enabled.
I've got no idea what is wrong. I've read in other threads about power cycling the devices, so I've tried that and it didn't work.
Perhaps if someone could point me to the right settings, perhaps it's worth power cycling again with the right settings. I'm particularly baffled by 2 things 1) what the AEBS wants for the Router Address and 2) why the modem has an IP address (perhaps just for accessing it's web based control panel?).
Help would be most welcome - I feel I have exhausted all of my 'trial and error' options.

If your ISP has provided you with a static IP address, then they will also have provided you with a subnet mask, a gateway or router (they are the same thing in this context) IP address, and domain name server address(es). It is essential to know this router (or gateway) IP address.
I've just reconfigured the DG834G back to mode+router, and noticed that when it connects it shows the subnet mark and gateway. My ISP only provided the IP address, and the Netgear seems to get the other details automatically. I have made a note of them, so I will try again entering them on the AEBS.
What remains unclear to me is exactly what functionality remains to the Netgear device when - as you said - it becomes configured to work as a modem only.
The info on the web control panel says it loses all routing functionality when in modem only mode.

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

How do I connect the airport express base station to the DSL modem? Can it be done wirelessly?

Can the airport express base station be wirelessly connected to the DCL modem?

Alan1111 wrote:
Can the airport express base station be wirelessly connected to the DCL modem?
Alan,
Please provide more information. (Make/model of the modem and airport express, Mac OS version, etc.)
Most likely your modem is the source of your internet connect and you sound like you are trying to extend your network through the airport express (which is a router).
I don't know what a "DCL modem" is. Perhaps you meant "DSL".
Most internet modems are either a "Cable Modem" or a "DSL Modem".
Time Warner (TMC) and Comcast typically provide cable modems, which use a coaxial (round) cable.
"DSL Modems" are used with AT&T and they are connected to your telephone wires.
Both of these types of modems usually includes a router built-in, some include a wireless router, too.
Either way, I don't know of any way to connect an Airport base station to a router wirelessly.
That would be called a "bridge" in networking terms and while it may be possible, it is not common.
Most routers use a direct ethernet cable connection, because the data flows much faster than wirelessly.
Normally, one connects to their airport base station with an ethernet cable from the primary home/office computer.
It can be accessed wirelessly, but only if you enable that option in the Airport utility (not the default).
Again, connecting or bridging one router to another router is not a common method.

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router
1. I’m writing from a rural town in Southern Nepal, very close to India. I’m planning to create a new WI-FI network at a small monastery here. Ideally, we will have two parallel wireless networks: the first network produced by an ADSL router/modem and a second network produced by another router in “repeater” mode.
2. Earlier, someone suggested that, when I post a question, I should provide as many details as possible about the situation here. Forgive me if there is “too much information”. I have to make a trip to the US to buy new networking equipment, so I very much want to get this right. Once I return here, I’ll be pretty much stuck with whatever I get in the US.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX). An Apple router would be ideal because my experience with Apple routers is happy: they are easy to set up, reliable, and secure. Moreover, we use Apple computers and iOS devices here (and the new AX has the “ac” thing which will be preferable as we replace old machines with new ones).
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
6. Our current, super-crappy 2wire 2701hg-t (ADSL modem/router) covers the 100-foot distance without a problem when it is working and there is Ethernet flowing to us. Frequently, our connection is very bad, and I may be unfairly judging the 2wire 2701hg-t. But, based on user reviews on the America Amazon.com, the 2wire 2701hg-t is pretty terrible: first it is simply old and second, among other problems, it seems to have a poor quality power supply unit. I do observe that it frequently seems to be recycling from scratch as if it had turned off and restarted. In any case, we are replacing it since it may be about 4 or 5 years old.
7. In previous posts on this forum, “LaPastenague” responded to some of my earlier questions about AX and ADSL. Among other things, he pointed out that (1) line-attenuation may be contributing to our poor connection and (2) we must choose a modem/router that is suitable for “long lines.” I’ve looked at our current modem/router statistics page; however, there are no statistics for line-attenuation or noise. (As you will see below, my strategy is to get the “better” modem/router that is suitable for long lines.)
8. Concerning our ADSL service, these are the facts I’ve gleaned from looking at the current router’s configuration pages:
Connection Type: PPPoE
Currently, the router is configured to use WPA-PSK security.
Connection Speed: Incoming: 1024 kbps & Outgoing: 509 kbps
(The following information may be unimportant at this time.)
Broadband Link Diagnostics:
DSL Synchronization: UP
G.DMT Signal: UP
PVC Connection: UP
PPPoE Service: UP
PPP Authentication: UP
IP Connection: UP
DNS Communication: UP
9. The ISP (Nepal Telecom) doesn’t supply a modem/router; however, they do have a list of (at times ancient) hardware and hardware vendors:
http://www.ntc.net.np/internet/adsl/adsl_vendersConf.php
10. Concerning what equipment is available here, what I have observed is that generally the ADSL modem/routers for sale locally, and in the far-away capital Kathmandu, and in nearby India are often also available in the United States, but they are the cheaper, older models. I will have to buy the new equipment in the US this year. At a different institution nearby, they are using the TP-Link modem/router td-w89016 which they purchased locally, I believe.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
13. In fact, does connecting them with a cable help alleviate some of the problems that can occur between the Apple device and the ADSL modem/router?
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
I think there are a lot of good reasons to use an AX router. Of course, if it is just going to be very cumbersome then, we would be loosing one of the best parts of using Apple products. So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple. Apple can rest assured that I will buy other things from them!
In that case, I’d likely buy a second TP-Link device to create a second network:
TL-Wa801NP [AP Mode Multi-SSID Mode AP Client Mode Repeater Mode (WDS / Universal) AP+ Bridge mode (point-to-point / point to Multi-point)].
Thank you in advance. Long live Apple!
Message was edited by: Jess1911

I am not sure if there are different interfaces but my 2wire does an excellent job with line info.
I get into this from browser.. using main IP.. in my case 10.0.0.138/MDC
In your case it should be whatever the IP of the 2wire is, followed by /mdc
Give it a try.
As you can see it shows vendor and loads of info about the line.
I rate it the best domestic modem for line info.
A good modem actually albeit a lousy router.
MDC is the diagnostics and Management Console.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
You are not repeating.. you are simply setting up two routers which are interconnected, so one is dependent on the other.. ie one is your adsl modem router and that will take the main router function. Your second router is really not working as a router, but as wireless access point (and switch if you plug things in).
That is perfectly fine. You are not roaming in this case since both routers are running different wireless names and networks.. but they are actually using same IP range.. all devices are on the one IP network with two different wireless access points.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX).
Apple router is fine for this. Easy to configure out of the box.
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
The problem arises when you try and interconnect using wireless extend or repeater.. you are not using wireless to extend, you are using ethernet. Wired has no issues.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
It is a good choice.. It should be fine considering how poor your line is.. this modem is proving to have a couple of bugs.. it does not handle torrents well but I would suggest your system is not being used for that purpose. It has some port forwarding issues. Again you are probably not going to overload it.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
Absolutely best.. only decent method.
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
Bridge. Although if it gives issues there is another method, although rather complex to setup.. not something to worry about now.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
Only the adsl modem has the ISP authentication.. it is the box that does the link. The TC just piggy backs.
The passwords on the TC are for its Admin, wireless and disk access.
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
For ADSL you must have the PPPoE authentication username and password.
So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.
hmmm.. I am biased because I see the issues not all the good stories..
The latest airport and Time Capsule seem to have a few pretty severe bugs.. if they happen to hit you, they are extremely hard to fix if you are in the middle of Nepal. And Apple service centre is a long long way away.
I cannot answer your question from the point of view of a person on the ground in remote area. If the economics of the purchase works for you, great. Go for it.
In terms of wireless coverage.. the Asus AC models or Netgear R7000 kill the Apple. Sorry but it is just fact.
See reviews here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c
That is average.. if you look at the apple router in the worst location by changing the filters, it comes out worse again.
I cannot post the URL to our local forum here.. (apple doesn't allow it). But in testing with apple clients the asus still beat Apple router soundly.
Pure wireless range is not the only consideration.. but in a mixed environment and since the wireless on the 8980N is not too bad.. then buy Apple router for apple client devices makes good sense.
Maybe the older Gen5.. or two of them.. would do a better job.. with a bit more tested and known hardware.
One thing you do need to check.
Routers from every other brand allow you to select country. Any country from anywhere in the world. Apple routers do not.
If you buy an airport in North America it is coded to North America and offers just a few countries.. USA, Canada I suppose.. what else is North America??
You cannot change it to Nepal.
To get the one for Nepal you must buy the model that covers, South Asia I guess.. I am not sure which it is.
See what the license information is for wifi in Nepal as it might be very different to US and therefore illegal for you to run it in Nepal.
If only the whole world would just bow to America.. we could all follow the FCC regs..
http://en.wikipedia.org/wiki/List_of_WLAN_channels
This only applies to the Apple.. the TP-Link etc allows you to choose Nepal or correct country regulations for wifi.
Buying modems has one tricky bit.. that the actual adsl ATM channel is different in different parts of the world. No modem is usually impossible to setup but some can be difficult if it is pre-configured for US.. this is easy to overcome generally as you can download a firmware for another locality, so you can have local settings.

Jumping gun? Netgear N300 Wireless ADSL2+ modem/router

Hi,
I'm probably jumping the gun here but I've got a Verizon Actiontec GT704WG modem/router and have been disapointed in the last few months by spotty wireless and internet connectivity when nothing else in my house has changed. In addition, I need to make a non-network-ready external HD a network drive so either have to have a NAS adapter (incredibly difficult to find at a local store) and I'm awaiting information on whether or not I have to format (again) my already FAT32 file system drive for an adapter to recognize the drive or whether or not the adapter will work without re-formatting my drive. The work around is the Netgear N300 Wireless ADSL2+ modem router because it will allow me to attach the non-network ready drive without an additional NAS adapter.
However, after reading all the problems that people have with third-party modem/routers and Verizon DSL I'm a little concerned about trying to hook this up as a solution. So I have some questions:
1. Do I have to put the Actiontec GT704WG into bridge mode as Verizon recommends or can I get rid of the Actiontec altogether and just use the new modem/router?
2. I have no idea if I have ADSL+ service with Verizon. Assume I can call and find out or get the info from my account page. But if I do not have that service, will the new modem/router work with basic ADSL service that Verizon provides (ok, that's my really dumb question)?
3. If it's better to just stick with the Verizon modem/router and get a NAS adapter does anyone have a recommendation on a reasonably priced adapter? I don't want a NAS enclosure as I'm not really interested in breaking my external drive and removing the guts so I'd prefer a stand-alone adapter.
4. If I can get rid of the Actiontec altogether, can someone provide some assistance for the proper settings to get me setup without too much fiddling? I'm so sick of spending hours trying to troubleshoot computer issues!
I have an older PC wired into the Actiontec, a network printer attached to the Actiontec, and am running windows XP pro on the PC and have a laptop that is running windows 7. Evil Empire Microsoft has made the lovely choice to make it difficult sometimes for the two OS to communicate and I'm tired of leaving the PC on all the time so that I can use my external drive (if Win7 cooperates) as a network drive through the PC. I'd rather have it as a real network drive operating independently of the PC and point my iTunes, word processing, and database programs to the network drive rather than trying to get them to run through the PC into the external drive.
I wish Verizon would offer more choices on modem/routers, especially ones that offer you the option to add a usb storage device as a network asset!
Thanks for any help! I know I'm jumping the gun a bit, but I'd like to return the new modem/router ASAP if it's not going to do what I need without tons of hassle.
Solved!
Go to Solution.

Since the Netgear you have is a DSL modem, there is no need to use the ActionTec. Disconnect it from the line and keep it around as a spare modem should you ever need it for troubleshooting purposes. Also, even though the modem you are buying is marketed as an ADSL2+ modem, the technology is specced to be backwards compatible with traditional ADSL. The ActionTec you currently have is an ADSL2+ modem itself, so that should back up that statement enough. The only thing you need to make sure you verify before switching the ActionTec out for the Netgear is what authentication mode the ActionTec is using. This can be set to either PPPoE or DHCP (shows as Routed Bridge mode) and should show up on the main status page when you visit the ActionTec's web inteface. If you're using PPPoE, you should have no issues getting the Netgear to work. If you're using DHCP, you will need to either close the MAC address of the ActionTec into the Netgear, or leave the modem overnight before you are able to obtain an IP address.
Otherwise the Netgear depends on how you decide to set it up. If you set it up through the Web Interface (http://192.168.1.1/ for Netgears, normally), you need to make sure the DSL Virtual Circuit is set to use 0/35, VPI of 0, VCI of 35. The modem should auto-detect this on first boot. Additionally, if you're using PPPoE you'd need to use your Verizon Username and Password to connect the modem. If you set it up using the Setup CD, it should do all of that heavy lifting.
ReadySHARE (what you're looking to set up with the External Hard Drive) uses the same Windows File and Sharing setup, however it does it using Samba shares, FTP and HTTP since the router runs Linux. The reliability you see might remain the same, but I suppose it's one of those things you need to wait and see how it works once the router is set up. Just remember, the speeds to the drive will not be as fast as going through a PC with better hardware under the hood.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Airport Express & Netgear routers....Again!

I've just bought an airport express expecting to be able to link it to my existing wireless network with a netgear DG834G2 router , guess I was naive to think it would be easy!
I've read the thread by MacAddict39 and being a bit green I'm not sure how to go about some of it so if someone could guide me and answer my questions it would be fantastic.
1. Connect the AirPort Express to your wired network; you do not need wireless to configure it, as it'll grab a DHCP lease itself off a LAN, assuming it's not setup for wifi yet. If you already screwed yours up royally, just push and hold the reset button -- wait and try this step again. It'll then use your LAN as it would out of box.
Do I use an ethernet cable and do I plug it into the router?what's DHCP?
2. Use the AirPort Admin Program, not the Setup Assistant. You can then enter the IP manually it gets from DHCP, or just scan the network to find it with AirPort Admin (insure you first install the latest version kids).
Where do I find the IP?being new from the box shouldn't the AX have the latest version?
3. When setting up your AirPort Express, enter your SSID by hand, and don't worry if it doesn't see it. Is the SSID NETGEAR?
4. When you enter the 128 bit WEP key, don't use the passphrase, use the key (hex code) generated/shown in the NETGEAR config screen. When you enter this code into the AirPort Admin app, preceed this code with the '$' character, as this tells it that you are entering a hex code, not the string literal thats used to generate the key. Yes, in both password fields add that '$' character -- both times. Where abouts do I find the WEP hex code?
5. Apply the changes (I set the AirPort Express to join my wireless network, since it's using wireless as a client). It'll take about 30 seconds to reboot and voila. You owe me a beer.
It'll be worth a beer after all this buggering about!
Thank you for any help you can provide......Cheers Phil
iMac G5 17" 1.8Ghz ,160GB hard drive,airport,superdrive,768MB ram Mac OS X (10.3.9)

I've just bought an airport express expecting to be
able to link it to my existing wireless network with
a netgear DG834G2 router , guess I was naive to think
it would be easy!
You should configure your AX to connect to the Netgear router in client mode.
What is client mode?
http://docs.info.apple.com/article.html?artnum=108040
You can do this wirelessly from your Mac.
If you have tried to configure before then you may need to reset the AX first.
Resetting AirPort Express
http://docs.info.apple.com/article.html?artnum=108044
Do I use an ethernet cable and do I plug it into the
router?
Yes that is what the instructions mean.
what's DHCP?
Simply this a process by which a router assigns IP addresses to clients on the network automatically.
Each client (computer or AX) needs their own individual IP address.
Where do I find the IP?
Using the Airport Admin Utility, therefore you need to be able to connect to it to know the IP address.
Your Netgear router may have a list of connected devices and therefore you can get the IP address that way.
being new from the box
shouldn't the AX have the latest version?
Sometimes yes, sometimes no.
. When setting up your AirPort Express, enter your
SSID by hand, and don't worry if it doesn't see it.
Is the SSID NETGEAR?
If your Netgear's wireless network name is NETGEAR, which it probably will be if you haven't changed the SSID from the default configuration.
Where abouts do I find the WEP
hex code?
First did you configure the Netgear router to use WEP?
From the configuration page of the Netgear router which will be accessed from a web browser, check the Netgear manual for details on how to do this.

Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?

Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?
Flow would be
Cable modem---->cisco e2000 wifi router (This is broadcasting wifi but not strong enough)---->4 port hub ---->airport express (to extend the wifi in another part of house)
thanks!

Yes, you can do this as you stated. In essence you will want to configure both routers for roaming network. Please check out the following Apple Support article that describes this type of network. Although this article uses two or more AirPorts, it can be done with just about any manufacturer's router.

Airport Express Card on a wireless PC network??

Hey there, I was curious if it was possible to use a G5 with an Airport Express Card on a wireless PC network. My wife needs to be able to access the internet from another part of the house. Someone mentioned that it might be possible, but I can't seem to find anything explaining how to do it. Thanks for your time!
Jeff

Which wireless router are you using?
Are you using WEP?
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
iFelix

Airport Express & Netgear DG834G 54Mbps Wireless ADSL Modem Router

Similar Messages

Maybe you are looking for