Airport Extreme Encryption Key for TV on OS X Server configuration

I have a Airport Extreme last model 5th generation, which is controlled by the OS X Server 2.2.1 on Mountain Lion 10.8.2. I´m running in a small structured Home Network. To go in i have always to input a User Name and Password, that works perfectly with OS X or Windows computers, as well as iPhone, iPad, and also my NAS system.
The problem is with my TV-set, it is a Panasonic and should connect via Wi-Fi, but it ask for the Network Encryption Key ! i tried to enter the Airport Password, but no success . also i tried look around google and the solutions were around the Airport Utility App, which was last year re-vamped and those solutions can not be used
any suggestion, where can i find my Network Encryption Key is welcome
thanks

yes, it is the right way
i start the Guest Wi-Fi Network with WPA2 Personal and it rocks
the problem, or not, i build a secure Network at home manage by the Server and not i open a Guest Hole dont know what are the risks in this Guest connection.
thanks anyway, your sugestion works

Similar Messages

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

Can you use airport extreme 802.11n for files backup

Can you use airport extreme 802.11 for files back up and sharing

You can if you connect a hard drive that has been formatted correctly to the USB port on the AirPort Extreme.
Apple does not officially support Time Machine backups for this type of setup, but you could store regular files this way.

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?

Airport extreme (UFO) used for bridge for remote camera system.

Where do I start! This could be a whole page of frustrated user set up of my APE.
Anyhow, after several hours of trying to get it to work, I'l give a quick summary of what I'm trying to accomplish.
What I Have : Airport extreme (square) base station running B/G specs (universal for all my computers)
Airport extreme ( UFO ), trying to use as a remote bridge for my video surveillance system in my basement.
What I want to do : Make the APE UFO talk to the APE square to send signal from my remote camera system to my APE square in my office.
Seems like it should be simple enough, however, I'm beyond myself at this point in trying to make it work. Maybe my settings are wrong on one, or even both of the APE's.
Port forwarding? Could I be missing a important step here?
Any thoughts, or step by step walk through would be very much appreciated.
AJ

A.J. Jones wrote:
What I want to do : Make the APE UFO talk to the APE square to send signal from my remote camera system to my APE square in my office.
You'll need to create a "static WDS" arrangement. To do that, you'll first need to note the MAC addresses ("AirPort IDs") of each station. Launch AirPort Utility, enter "manual setup" mode for the square APE, then hold down an "option" key while you pull down the "Wireless Mode" list under the AirPort/Wireless panel. Pick the choice to "Participate in a WDS network". Fill in the details, declaring the square APE to be the "WDS Main" and the AirPort ID of the UFO station in the WDS Remote" list. Save the configuration. Now use AirPort Utility on the "UFO" APE. (You may need to connect to it with an Ethernet cable to see it.) Set the "Wireless Mode" the same, declaring the base station as a remote station. Be sure to use identical values for network name, wireless security method, network password, band, and channel on both stations.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Apple Airport Extreme Base Station for PPPoE, DHCP and NAT with ActionTec DSL modem

I just spent several hours trying to track down proper instructions for setting up my Apple AEBS to do the PPPoE, DHCP and NAT while connected to an ActionTec M1000 (no wireless module). It turns out my initial set ups on both devices were correct, but that the order for rebooting and reconnecting the two devices is critical. All of the threads I found on this forum and on many others suggested this was not possible, but it is. What I don't yet know is whether it is the best method for running my home network DSL connection to my ISP (CenturyLink).
The instructions I found that worked come courtesy of Brandon Konkle's blog and are both simple and clear: http://brandon.konkle.us/post/19637529637/centurylink-actiontec-q1000-airport-ex treme-bridge
The proper settings for the ActionTec DSL Modem can be found under Advanced Setup/IP Adressing/WAN IP Address
Click RFC 1483 Transparent Bridging then click on Apply.
(see also http://qwest.centurylink.com/internethelp/modems/m1000/pdf/M1000_BRIDGE.pdf )
To reduce time, do this BEFORE you reset your AEBS then set the AEBS so that you don't have to wait for the AEBS to reboot.
In contrast to what Brandon described for the Q1000 modem, my AEBS never reconnected to the modem (he describes his as getting an IP from his ISP, then dropping it then getting another over and over - mine never got an IP). Once you have reset both devices as described, the critical steps I have not found described elsewhere were:
1. Disconnect the power from both the modem and the Airport Extreme.
2. Disconnect the Ethernet cable between the two devices
3. Restore power to the 2 devices and allow them to fully reboot. For the ActionTec M1000, this is indicated when the lights stop blinking. (Note that the Internet light will NOT be lit in this instance since the modem is acting only as a bridge. You will NOT have an Internet connection until the AEBS is reconnected.) The AEBS will be blinking yellow.
4. Reconnect the Ethernet cable between the devices (make sure on the M1000 that you are using the connector with the circle icon over it, not the arrow icon).
Within about 60 seconds, the AEBS light went to steady green and the connection to the Internet was restored.
Now I have to see if this is a more stable configuration than the flaky one I had before while using the AEBS as a bridge and the M1000 to do everything.
Does anyone think or know if it will make a difference?
Message was edited by: Bud Shaw

Now I have to see if this is a more stable configuration than the flaky one I had before while using the AEBS as a bridge and the M1000 to do everything.
Does anyone think or know if it will make a difference?
No one can accurately predict in advance what the actual results might be. I've tried both ways with different products and cannot say that one method is better than the other. What works is best.
In theory, it is preferable to have the modem provide the PPPoE connection service since it is the device connected directly to the Internet.
In practice, results vary depending on the service provider, products used, phase of the moon, alignment of the planets, etc.

AirPort Extreme (Still) Looking for a PPPoE Host

Help! I have a PowerBook G4 (OS X 10.4.2) that I've used with my AirPort Extreme for over a year and half without any major problems. I upgraded to AirPort 4.2 last week without incident, but since yesterday my base station hasn't been able to connect over PPPoE to my DSL.
Sometimes the AirPort Admin Utility can't find the base station, even after a hard reset; sometimes it can find it but not configure it ("there was an error configuring the base station"). Even if I can connect to the base station and configure it, though, the base station still won't connect to the internet ("Looking for PPPoE host" for about 5 minutes, followed by "Not connected via PPPoE. There was no answer.") I can get on the internet without any problems if I connect through the built-in Ethernet, at least once completely reconfigure the network port settings.
I'm not sure what to do at this point; I've tried to reset both the base station and the modem over 20 times (including leaving them unplugged for an hour), and "rebuilding AirPort from scratch" like one of the other posts suggested, but nothing seems to work. At this point I'm considering re-installing the software AirPort came with (3.1) or re-installing Tiger, though I'm not sure 3.1 will work with Tiger--and I'd prefer not to rebuild the entire system.
Any ideas?

I'm suffering from the same problem but was able able to run airTunes. First, go to admin and tell it not to connect using PPPoE but make sure you uncheck the PPPoE in Network. Now the other problem that I have is the latest Airport Admin Utility. It will not connect. Solid green light, AE is just a metre away and it says 'can't connect to the net. So how do I remove Admin 6.4 'cause that's the main problem. i've installed the Express firmware 6.1.1 & 6.2. I'm buggerd if I know.

Airport Extreme drops connection for a few seconds at a time

My airport extreme seems to drop its connection for about 5 seconds at a time and then is back up. It does it every 10-15 minutes or so. I am not really sure why it is doing this because it has just started happening recently and worked fine for months and months. I need help because I dont know much about networking.

When you inserted your AirPort Extreme (It was an AirPort Extreme card, right?) card in your G5, did you attach the antenna cable AND the external "T" antenna?

Airport Extreme causes ssh_exchange_identification for SFTP

I get ssh_exchange_identification during a client SFTP session to webserver behind a Load balanced server.
SFTP works with Lion and Snow Leopard but does not work with my Airport Extreme in place. SFTP also works with other firewalls in other networks. It seems the Airport is the culprit. This should be straight forward as its just a client session going out. Tried many modification to OSX but not sure if they are really needed since SFTP works fine without the Airport Extreme. Aiport is running 7.6.1. Below is the SFTP log.
$ sftp -v -v -v [email protected]
OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011
debug1: Reading configuration data /etc/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX] port 22.
debug1: Connection established.
debug1: identity file /Users/USER/.ssh/id_rsa type -1
debug1: identity file /Users/USER/.ssh/id_rsa-cert type -1
debug1: identity file /Users/USER/.ssh/id_dsa type -1
debug1: identity file /Users/USER/.ssh/id_dsa-cert type -1
ssh_exchange_identification: Connection closed by remote host
Looks to me a connection is started on port 22 then gets clipped. Any help would be greatly appreciated.

my IP did not sure. i am positive of that.
The DNS problem is not constant, sometimes it works without pinging the others i have to ping manually.
by the way, i am trying to SSH into the same computer i am using :S
i know it is stupid not to SSH user@localhost
yes, @localhost works, but before that day, i used to ssh @my IP
HTTP works perfectly again, it was a DHCP error

System encryption using LUKS and GPG encrypted keys for arch linux

Update: As of 2012-03-28, arch changed from gnupg 1.4 to 2.x which uses pinentry for the password dialog. The "etwo" hook described here doesn't work with gnupg 2. Either use the openssl hook below or use a statically compiled version of gnupg 1.4.
Update: As of 2012-12-19, the mkinitcpio is not called during boot, unless the "install" file for the hook contains "add_runscript". This resulted in an unbootable system for me. Also, the method name was changed from install () to build ().
Update: 2013-01-13: Updated the hook files using the corrections by Deth.
Note: This guide is a bit dated now, in particular the arch installation might be different now. But essentially, the approach stays the same. Please also take a look at the posts further down, specifically the alternative hooks that use openssl.
I always wanted to set up a fully encrypted arch linux server that uses gpg encrypted keyfiles on an external usb stick and luks for root filesystem encryption. I already did it once in gentoo using this guide. For arch, I had to play alot with initcpio hooks and after one day of experimentation, I finally got it working. I wrote a little guide for myself which I'm going to share here for anyone that might be interested. There might be better or easier ways, like I said this is just how I did it. I hope it might help someone else. Constructive feedback is always welcome
Intro
Using arch linux mkinitcpio's encrypt hook, one can easily use encrypted root partitions with LUKS. It's also possible to use key files stored on an external drive, like an usb stick. However, if someone steals your usb stick, he can just copy the key and potentially access the system. I wanted to have a little extra security by additionally encrypting the key file with gpg using a symmetric cipher and a passphrase.
Since the encrypt hook doesn't support this scenario, I created a modifed hook called “etwo” (silly name I know, it was the first thing that came to my mind). It will simply look if the key file has the extension .gpg and, if yes, use gpg to decrypt it, then pipe the result into cryptsetup.
Conventions
In this short guide, I use the following disk/partition names:
/dev/sda: is the hard disk that will contain an encrypted swap (/dev/sda1), /var (/dev/sda2) and root (/dev/sda3) partition.
/dev/sdb is the usb stick that will contain the gpg encrypted luks keys, the kernel and grub. It will have one partition /dev/sdb1 formatted with ext2.
/dev/mapper/root, /dev/mapper/swap and /dev/mapper/var will be the encrypted devices.
Credits
Thanks to the authors of SECURITY_System_Encryption_DM-Crypt_with_LUKS (gentoo wiki), System Encryption with LUKS (arch wiki), mkinitcpio (arch wiki) and Early Userspace in Arch Linux (/dev/brain0 blog)!
Guide
1. Boot the arch live cd
I had to use a newer testing version, because the 2010.05 cd came with a broken gpg. You can download one here: http://releng.archlinux.org/isos/. I chose the “core“ version. Go ahead and boot the live cd, but don't start the setup yet.
2. Set keymap
Use km to set your keymap. This is important for non-qwerty keyboards to avoid suprises with passphrases...
3. Wipe your discs
ATTENTION: this will DELETE everything on /dev/sda and /dev/sdb forever! Do not blame me for any lost data!
Before encrypting the hard disc, it has to be completely wiped and overwritten with random data. I used shred for this. Others use badblocks or dd with /dev/urandom. Either way, this will take a long time, depending on the size of your disc. I also wiped my usb stick just to be sure.
shred -v /dev/sda
shred -v /dev/sdb
4. Partitioning
Fire up fdisk and create the following partitions:
/dev/sda1, type linux swap.
/dev/sda2: type linux
/dev/sda3: type linux
/dev/sdb1, type linux
Of course you can choose a different layout, this is just how I did it. Keep in mind that only the root filesystem will be decrypted by the initcpio. The rest will be decypted during normal init boot using /etc/crypttab, the keys being somewhere on the root filesystem.
5. Format and mount the usb stick
Create an ext2 filesystem on /dev/sdb1:
mkfs.ext2 /dev/sdb1
mkdir /root/usb
mount /dev/sdb1 /root/usb
cd /root/usb # this will be our working directory for now.
Do not mount anything to /mnt, because the arch installer will use that directory later to mount the encrypted root filesystem.
6. Configure the network (if not already done automatically)
ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1
echo "nameserver 192.168.0.1" >> /etc/resolv.conf
(this is just an example, your mileage may vary)
7. Install gnupg
pacman -Sy
pacman -S gnupg
Verify that gnupg works by launching gpg.
8. Create the keys
Just to be sure, make sure swap is off:
cat /proc/swaps
should return no entries.
Create gpg encrypted keys (remember, we're still in our working dir /root/usb):
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > root.gpg
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > var.gpg
Choose a strong password!!
Don't do this in two steps, e.g don't do dd to a file and then gpg on that file. The key should never be stored in plain text on an unencrypted device, except if that device is wiped on system restart (ramfs)!
Note that the default cipher for gpg is cast5, I just chose to use a different one.
9. Create the encrypted devices with cryptsetup
Create encrypted swap:
cryptsetup -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -d /dev/urandom create swap /dev/sda1
You should see /dev/mapper/swap now. Don't format nor turn it on for now. This will be done by the arch installer.
Important: From the Cryptsetup 1.1.2 Release notes:
Cryptsetup can accept passphrase on stdin (standard input). Handling of new line (\n) character is defined by input specification:
if keyfile is specified as "-" (using --key-file=- or by positional argument in luksFormat and luksAddKey, like cat file | cryptsetup --key-file=- <action> ), input is processed
as normal binary file and no new line is interpreted.
if there is no key file specification (with default input from stdin pipe like echo passphrase | cryptsetup <action> ) input is processed as input from terminal, reading will
stop after new line is detected.
If I understand this correctly, since the randomly generated key can contain a newline early on, piping the key into cryptsetup without specifying --key-file=- could result in a big part of the key to be ignored by cryptsetup. Example: if the random key was "foo\nandsomemorebaratheendofthekey", piping it directly into cryptsetup without --key-file=- would result in cryptsetup using only "foo" as key which would have big security implications. We should therefor ALWAYS pipe the key into cryptsetup using --key-file=- which ignores newlines.
gpg -q -d root.gpg 2>/dev/null | cryptsetup -v -–key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool luksFormat /dev/sda3
gpg -q -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -v luksFormat /dev/sda2
Check for any errors.
10. Open the luks devices
gpg -d root.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda3 root
gpg -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda2 var
If you see /dev/mapper/root and /dev/mapper/var now, everything is ok.
11. Start the installer /arch/setup
Follow steps 1 to 3.
At step 4 (Prepare hard drive(s), select “3 – Manually Configure block devices, filesystems and mountpoints. Choose /dev/sdb1 (the usb stick) as /boot, /dev/mapper/swap for swap, /dev/mapper/root for / and /dev/mapper/var for /var.
Format all drives (choose “yes” when asked “do you want to have this filesystem (re)created”) EXCEPT for /dev/sdb1, choose “no”. Choose the correct filesystem for /dev/sdb1, ext2 in my case. Use swap for /dev/mapper/swap. For the rest, I chose ext4.
Select DONE to start formatting.
At step 5 (Select packages), select grub as boot loader. Select the base group. Add mkinitcpio.
Start step 6 (Install packages).
Go to step 7 (Configure System).
By sure to set the correct KEYMAP, LOCALE and TIMEZONE in /etc/rc.conf.
Edit /etc/fstab:
/dev/mapper/root / ext4 defaults 0 1
/dev/mapper/swap swap swap defaults 0 0
/dev/mapper/var /var ext4 defaults 0 1
# /dev/sdb1 /boot ext2 defaults 0 1
Configure the rest normally. When you're done, setup will launch mkinitcpio. We'll manually launch this again later.
Go to step 8 (install boot loader).
Be sure to change the kernel line in menu.lst:
kernel /vmlinuz26 root=/dev/mapper/root cryptdevice=/dev/sda3:root cryptkey=/dev/sdb1:ext2:/root.gpg
Don't forget the :root suffix in cryptdevice!
Also, my root line was set to (hd1,0). Had to change that to
root (hd0,0)
Install grub to /dev/sdb (the usb stick).
Now, we can exit the installer.
12. Install mkinitcpio with the etwo hook.
Create /mnt/lib/initcpio/hooks/etwo:
#!/usr/bin/ash
run_hook() {
/sbin/modprobe -a -q dm-crypt >/dev/null 2>&1
if [ -e "/sys/class/misc/device-mapper" ]; then
if [ ! -e "/dev/mapper/control" ]; then
/bin/mknod "/dev/mapper/control" c $(cat /sys/class/misc/device-mapper/dev | sed 's|:| |')
fi
[ "${quiet}" = "y" ] && CSQUIET=">/dev/null"
# Get keyfile if specified
ckeyfile="/crypto_keyfile"
usegpg="n"
if [ "x${cryptkey}" != "x" ]; then
ckdev="$(echo "${cryptkey}" | cut -d: -f1)"
ckarg1="$(echo "${cryptkey}" | cut -d: -f2)"
ckarg2="$(echo "${cryptkey}" | cut -d: -f3)"
if poll_device "${ckdev}" ${rootdelay}; then
case ${ckarg1} in
*[!0-9]*)
# Use a file on the device
# ckarg1 is not numeric: ckarg1=filesystem, ckarg2=path
if [ "${ckarg2#*.}" = "gpg" ]; then
ckeyfile="${ckeyfile}.gpg"
usegpg="y"
fi
mkdir /ckey
mount -r -t ${ckarg1} ${ckdev} /ckey
dd if=/ckey/${ckarg2} of=${ckeyfile} >/dev/null 2>&1
umount /ckey
# Read raw data from the block device
# ckarg1 is numeric: ckarg1=offset, ckarg2=length
dd if=${ckdev} of=${ckeyfile} bs=1 skip=${ckarg1} count=${ckarg2} >/dev/null 2>&1
esac
fi
[ ! -f ${ckeyfile} ] && echo "Keyfile could not be opened. Reverting to passphrase."
fi
if [ -n "${cryptdevice}" ]; then
DEPRECATED_CRYPT=0
cryptdev="$(echo "${cryptdevice}" | cut -d: -f1)"
cryptname="$(echo "${cryptdevice}" | cut -d: -f2)"
else
DEPRECATED_CRYPT=1
cryptdev="${root}"
cryptname="root"
fi
warn_deprecated() {
echo "The syntax 'root=${root}' where '${root}' is an encrypted volume is deprecated"
echo "Use 'cryptdevice=${root}:root root=/dev/mapper/root' instead."
if poll_device "${cryptdev}" ${rootdelay}; then
if /sbin/cryptsetup isLuks ${cryptdev} >/dev/null 2>&1; then
[ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
dopassphrase=1
# If keyfile exists, try to use that
if [ -f ${ckeyfile} ]; then
if [ "${usegpg}" = "y" ]; then
# gpg tty fixup
if [ -e /dev/tty ]; then mv /dev/tty /dev/tty.backup; fi
cp -a /dev/console /dev/tty
while [ ! -e /dev/mapper/${cryptname} ];
do
sleep 2
/usr/bin/gpg -d "${ckeyfile}" 2>/dev/null | cryptsetup --key-file=- luksOpen ${cryptdev} ${cryptname} ${CSQUIET}
dopassphrase=0
done
rm /dev/tty
if [ -e /dev/tty.backup ]; then mv /dev/tty.backup /dev/tty; fi
else
if eval /sbin/cryptsetup --key-file ${ckeyfile} luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; then
dopassphrase=0
else
echo "Invalid keyfile. Reverting to passphrase."
fi
fi
fi
# Ask for a passphrase
if [ ${dopassphrase} -gt 0 ]; then
echo ""
echo "A password is required to access the ${cryptname} volume:"
#loop until we get a real password
while ! eval /sbin/cryptsetup luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; do
sleep 2;
done
fi
if [ -e "/dev/mapper/${cryptname}" ]; then
if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
export root="/dev/mapper/root"
fi
else
err "Password succeeded, but ${cryptname} creation failed, aborting..."
exit 1
fi
elif [ -n "${crypto}" ]; then
[ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
msg "Non-LUKS encrypted device found..."
if [ $# -ne 5 ]; then
err "Verify parameter format: crypto=hash:cipher:keysize:offset:skip"
err "Non-LUKS decryption not attempted..."
return 1
fi
exe="/sbin/cryptsetup create ${cryptname} ${cryptdev}"
tmp=$(echo "${crypto}" | cut -d: -f1)
[ -n "${tmp}" ] && exe="${exe} --hash \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f2)
[ -n "${tmp}" ] && exe="${exe} --cipher \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f3)
[ -n "${tmp}" ] && exe="${exe} --key-size \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f4)
[ -n "${tmp}" ] && exe="${exe} --offset \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f5)
[ -n "${tmp}" ] && exe="${exe} --skip \"${tmp}\""
if [ -f ${ckeyfile} ]; then
exe="${exe} --key-file ${ckeyfile}"
else
exe="${exe} --verify-passphrase"
echo ""
echo "A password is required to access the ${cryptname} volume:"
fi
eval "${exe} ${CSQUIET}"
if [ $? -ne 0 ]; then
err "Non-LUKS device decryption failed. verify format: "
err " crypto=hash:cipher:keysize:offset:skip"
exit 1
fi
if [ -e "/dev/mapper/${cryptname}" ]; then
if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
export root="/dev/mapper/root"
fi
else
err "Password succeeded, but ${cryptname} creation failed, aborting..."
exit 1
fi
else
err "Failed to open encryption mapping: The device ${cryptdev} is not a LUKS volume and the crypto= paramater was not specified."
fi
fi
rm -f ${ckeyfile}
fi
Create /mnt/lib/initcpio/install/etwo:
#!/bin/bash
build() {
local mod
add_module dm-crypt
if [[ $CRYPTO_MODULES ]]; then
for mod in $CRYPTO_MODULES; do
add_module "$mod"
done
else
add_all_modules '/crypto/'
fi
add_dir "/dev/mapper"
add_binary "cryptsetup"
add_binary "dmsetup"
add_binary "/usr/bin/gpg"
add_file "/usr/lib/udev/rules.d/10-dm.rules"
add_file "/usr/lib/udev/rules.d/13-dm-disk.rules"
add_file "/usr/lib/udev/rules.d/95-dm-notify.rules"
add_file "/usr/lib/initcpio/udev/11-dm-initramfs.rules" "/usr/lib/udev/rules.d/11-dm-initramfs.rules"
add_runscript
help ()
cat<<HELPEOF
This hook allows for an encrypted root device with support for gpg encrypted key files.
To use gpg, the key file must have the extension .gpg and you have to install gpg and add /usr/bin/gpg
to your BINARIES var in /etc/mkinitcpio.conf.
HELPEOF
Edit /mnt/etc/mkinitcpio.conf (only relevant sections displayed):
MODULES=”ext2 ext4” # not sure if this is really nessecary.
BINARIES=”/usr/bin/gpg” # this could probably be done in install/etwo...
HOOKS=”base udev usbinput keymap autodetect pata scsi sata usb etwo filesystems” # (usbinput is only needed if you have an usb keyboard)
Copy the initcpio stuff over to the live cd:
cp /mnt/lib/initcpio/hooks/etwo /lib/initcpio/hooks/
cp /mnt/lib/initcpio/install/etwo /lib/initcpio/install/
cp /mnt/etc/mkinitcpio.conf /etc/
Verify your LOCALE, KEYMAP and TIMEZONE in /etc/rc.conf!
Now reinstall the initcpio:
mkinitcpio -g /mnt/boot/kernel26.img
Make sure there were no errors and that all hooks were included.
13. Decrypt the "var" key to the encrypted root
mkdir /mnt/keys
chmod 500 /mnt/keys
gpg –output /mnt/keys/var -d /mnt/boot/var.gpg
chmod 400 /mnt/keys/var
14. Setup crypttab
Edit /mnt/etc/crypttab:
swap /dev/sda1 SWAP -c aes-cbc-essiv:sha256 -s 256 -h whirlpool
var /dev/sda2 /keys/var
15. Reboot
We're done, you may reboot. Make sure you select the usb stick as the boot device in your bios and hope for the best. . If it didn't work, play with grub's settings or boot from the live cd, mount your encrypted devices and check all settings. You might also have less trouble by using uuid's instead of device names. I chose device names to keep things as simple as possible, even though it's not the optimal way to do it.
Make backups of your data and your usb stick and do not forget your password(s)! Or you can say goodbye to your data forever...
Last edited by fabriceb (2013-01-15 22:36:23)

I'm trying to run my install script that is based on https://bbs.archlinux.org/viewtopic.php?id=129885
Decrypting the gpg key after grub works, but then "Devce root already exists." appears every second.
any idea ?
#!/bin/bash
# This script is designed to be run in conjunction with a UEFI boot using Archboot intall media.
# prereqs:
# EFI "BIOS" set to boot *only* from EFI
# successful EFI boot of Archboot USB
# mount /dev/sdb1 /src
set -o nounset
#set -o errexit
# Host specific configuration
# this whole script needs to be customized, particularly disk partitions
# and configuration, but this section contains global variables that
# are used during the system configuration phase for convenience
HOSTNAME=daniel
USERNAME=user
# Globals
# We don't need to set these here but they are used repeatedly throughout
# so it makes sense to reuse them and allow an easy, one-time change if we
# need to alter values such as the install target mount point.
INSTALL_TARGET="/install"
HR="--------------------------------------------------------------------------------"
PACMAN="pacman --noconfirm --config /tmp/pacman.conf"
TARGET_PACMAN="pacman --noconfirm --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
CHROOT_PACMAN="pacman --noconfirm --cachedir /var/cache/pacman/pkg --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
FILE_URL="file:///packages/core-$(uname -m)/pkg"
FTP_URL='ftp://mirrors.kernel.org/archlinux/$repo/os/$arch'
HTTP_URL='http://mirrors.kernel.org/archlinux/$repo/os/$arch'
# Functions
# I've avoided using functions in this script as they aren't required and
# I think it's more of a learning tool if you see the step-by-step
# procedures even with minor duplciations along the way, but I feel that
# these functions clarify the particular steps of setting values in config
# files.
SetValue () {
# EXAMPLE: SetValue VARIABLENAME '\"Quoted Value\"' /file/path
VALUENAME="$1" NEWVALUE="$2" FILEPATH="$3"
sed -i "s+^#\?$${VALUENAME}$=.*$+\1=${NEWVALUE}+" "${FILEPATH}"
CommentOutValue () {
VALUENAME="$1" FILEPATH="$2"
sed -i "s/^$${VALUENAME}.*$$/#\1/" "${FILEPATH}"
UncommentValue () {
VALUENAME="$1" FILEPATH="$2"
sed -i "s/^#$${VALUENAME}.*$$/\1/" "${FILEPATH}"
# Initialize
# Warn the user about impending doom, set up the network on eth0, mount
# the squashfs images (Archboot does this normally, we're just filling in
# the gaps resulting from the fact that we're doing a simple scripted
# install). We also create a temporary pacman.conf that looks for packages
# locally first before sourcing them from the network. It would be better
# to do either *all* local or *all* network but we can't for two reasons.
# 1. The Archboot installation image might have an out of date kernel
# (currently the case) which results in problems when chrooting
# into the install mount point to modprobe efivars. So we use the
# package snapshot on the Archboot media to ensure our kernel is
# the same as the one we booted with.
# 2. Ideally we'd source all local then, but some critical items,
# notably grub2-efi variants, aren't yet on the Archboot media.
# Warn
timer=9
echo -e "\n\nMAC WARNING: This script is not designed for APPLE MAC installs and will potentially misconfigure boot to your existing OS X installation. STOP NOW IF YOU ARE ON A MAC.\n\n"
echo -n "GENERAL WARNING: This procedure will completely format /dev/sda. Please cancel with ctrl-c to cancel within $timer seconds..."
while [[ $timer -gt 0 ]]
do
sleep 1
let timer-=1
echo -en "$timer seconds..."
done
echo "STARTING"
# Get Network
echo -n "Waiting for network address.."
#dhclient eth0
dhcpcd -p eth0
echo -n "Network address acquired."
# Mount packages squashfs images
umount "/packages/core-$(uname -m)"
umount "/packages/core-any"
rm -rf "/packages/core-$(uname -m)"
rm -rf "/packages/core-any"
mkdir -p "/packages/core-$(uname -m)"
mkdir -p "/packages/core-any"
modprobe -q loop
modprobe -q squashfs
mount -o ro,loop -t squashfs "/src/packages/archboot_packages_$(uname -m).squashfs" "/packages/core-$(uname -m)"
mount -o ro,loop -t squashfs "/src/packages/archboot_packages_any.squashfs" "/packages/core-any"
# Create temporary pacman.conf file
cat << PACMANEOF > /tmp/pacman.conf
[options]
Architecture = auto
CacheDir = ${INSTALL_TARGET}/var/cache/pacman/pkg
CacheDir = /packages/core-$(uname -m)/pkg
CacheDir = /packages/core-any/pkg
[core]
Server = ${FILE_URL}
Server = ${FTP_URL}
Server = ${HTTP_URL}
[extra]
Server = ${FILE_URL}
Server = ${FTP_URL}
Server = ${HTTP_URL}
#Uncomment to enable pacman -Sy yaourt
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
PACMANEOF
# Prepare pacman
[[ ! -d "${INSTALL_TARGET}/var/cache/pacman/pkg" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/cache/pacman/pkg"
[[ ! -d "${INSTALL_TARGET}/var/lib/pacman" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/lib/pacman"
${PACMAN} -Sy
${TARGET_PACMAN} -Sy
# Install prereqs from network (not on archboot media)
echo -e "\nInstalling prereqs...\n$HR"
#sed -i "s/^#S/S/" /etc/pacman.d/mirrorlist # Uncomment all Server lines
UncommentValue S /etc/pacman.d/mirrorlist # Uncomment all Server lines
${PACMAN} --noconfirm -Sy gptfdisk btrfs-progs-unstable libusb-compat gnupg
# Configure Host
# Here we create three partitions:
# 1. efi and /boot (one partition does double duty)
# 2. swap
# 3. our encrypted root
# Note that all of these are on a GUID partition table scheme. This proves
# to be quite clean and simple since we're not doing anything with MBR
# boot partitions and the like.
echo -e "format\n"
# shred -v /dev/sda
# disk prep
sgdisk -Z /dev/sda # zap all on disk
#sgdisk -Z /dev/mmcb1k0 # zap all on sdcard
sgdisk -a 2048 -o /dev/sda # new gpt disk 2048 alignment
#sgdisk -a 2048 -o /dev/mmcb1k0
# create partitions
sgdisk -n 1:0:+200M /dev/sda # partition 1 (UEFI BOOT), default start block, 200MB
sgdisk -n 2:0:+4G /dev/sda # partition 2 (SWAP), default start block, 200MB
sgdisk -n 3:0:0 /dev/sda # partition 3, (LUKS), default start, remaining space
#sgdisk -n 1:0:1800M /dev/mmcb1k0 # root.gpg
# set partition types
sgdisk -t 1:ef00 /dev/sda
sgdisk -t 2:8200 /dev/sda
sgdisk -t 3:8300 /dev/sda
#sgdisk -t 1:0700 /dev/mmcb1k0
# label partitions
sgdisk -c 1:"UEFI Boot" /dev/sda
sgdisk -c 2:"Swap" /dev/sda
sgdisk -c 3:"LUKS" /dev/sda
#sgdisk -c 1:"Key" /dev/mmcb1k0
echo -e "create gpg file\n"
# create gpg file
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > /root/root.gpg
echo -e "format LUKS on root\n"
# format LUKS on root
gpg -q -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- -c aes-xts-plain -s 512 --hash sha512 luksFormat /dev/sda3
echo -e "open LUKS on root\n"
gpg -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- luksOpen /dev/sda3 root
# NOTE: make sure to add dm_crypt and aes_i586 to MODULES in rc.conf
# NOTE2: actually this isn't required since we're mounting an encrypted root and grub2/initramfs handles this before we even get to rc.conf
# make filesystems
# following swap related commands not used now that we're encrypting our swap partition
#mkswap /dev/sda2
#swapon /dev/sda2
#mkfs.ext4 /dev/sda3 # this is where we'd create an unencrypted root partition, but we're using luks instead
echo -e "\nCreating Filesystems...\n$HR"
# make filesystems
mkfs.ext4 /dev/mapper/root
mkfs.vfat -F32 /dev/sda1
#mkfs.vfat -F32 /dev/mmcb1k0p1
echo -e "mount targets\n"
# mount target
#mount /dev/sda3 ${INSTALL_TARGET} # this is where we'd mount the unencrypted root partition
mount /dev/mapper/root ${INSTALL_TARGET}
# mount target
mkdir ${INSTALL_TARGET}
# mkdir ${INSTALL_TARGET}/key
# mount -t vfat /dev/mmcb1k0p1 ${INSTALL_TARGET}/key
mkdir ${INSTALL_TARGET}/boot
mount -t vfat /dev/sda1 ${INSTALL_TARGET}/boot
# Install base, necessary utilities
mkdir -p ${INSTALL_TARGET}/var/lib/pacman
${TARGET_PACMAN} -Sy
${TARGET_PACMAN} -Su base
# curl could be installed later but we want it ready for rankmirrors
${TARGET_PACMAN} -S curl
${TARGET_PACMAN} -S libusb-compat gnupg
${TARGET_PACMAN} -R grub
rm -rf ${INSTALL_TARGET}/boot/grub
${TARGET_PACMAN} -S grub2-efi-x86_64
# Configure new system
SetValue HOSTNAME ${HOSTNAME} ${INSTALL_TARGET}/etc/rc.conf
sed -i "s/^$127\.0\.0\.1.*$$/\1 ${HOSTNAME}/" ${INSTALL_TARGET}/etc/hosts
SetValue CONSOLEFONT Lat2-Terminus16 ${INSTALL_TARGET}/etc/rc.conf
#following replaced due to netcfg
#SetValue interface eth0 ${INSTALL_TARGET}/etc/rc.conf
# write fstab
# You can use UUID's or whatever you want here, of course. This is just
# the simplest approach and as long as your drives aren't changing values
# randomly it should work fine.
cat > ${INSTALL_TARGET}/etc/fstab <<FSTAB_EOF
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sda1 /boot vfat defaults 0 0
/dev/mapper/cryptswap none swap defaults 0 0
/dev/mapper/root / ext4 defaults,noatime 0 1
FSTAB_EOF
# write etwo
mkdir -p /lib/initcpio/hooks/
mkdir -p /lib/initcpio/install/
cp /src/etwo_hooks /lib/initcpio/hooks/etwo
cp /src/etwo_install /lib/initcpio/install/etwo
mkdir -p ${INSTALL_TARGET}/lib/initcpio/hooks/
mkdir -p ${INSTALL_TARGET}/lib/initcpio/install/
cp /src/etwo_hooks ${INSTALL_TARGET}/lib/initcpio/hooks/etwo
cp /src/etwo_install ${INSTALL_TARGET}/lib/initcpio/install/etwo
# write crypttab
# encrypted swap (random passphrase on boot)
echo cryptswap /dev/sda2 SWAP "-c aes-xts-plain -h whirlpool -s 512" >> ${INSTALL_TARGET}/etc/crypttab
# copy configs we want to carry over to target from install environment
mv ${INSTALL_TARGET}/etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf.orig
cp /etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf
mkdir -p ${INSTALL_TARGET}/tmp
cp /tmp/pacman.conf ${INSTALL_TARGET}/tmp/pacman.conf
# mount proc, sys, dev in install root
mount -t proc proc ${INSTALL_TARGET}/proc
mount -t sysfs sys ${INSTALL_TARGET}/sys
mount -o bind /dev ${INSTALL_TARGET}/dev
echo -e "umount boot\n"
# we have to remount /boot from inside the chroot
umount ${INSTALL_TARGET}/boot
# Create install_efi script (to be run *after* chroot /install)
touch ${INSTALL_TARGET}/install_efi
chmod a+x ${INSTALL_TARGET}/install_efi
cat > ${INSTALL_TARGET}/install_efi <<EFI_EOF
# functions (these could be a library, but why overcomplicate things
SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?$\${VALUENAME}$=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^$\${VALUENAME}.*$\$/#\1/" "\${FILEPATH}"; }
UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#$\${VALUENAME}.*$\$/\1/" "\${FILEPATH}"; }
echo -e "mount boot\n"
# remount here or grub et al gets confused
mount -t vfat /dev/sda1 /boot
# mkinitcpio
# NOTE: intel_agp drm and i915 for intel graphics
SetValue MODULES '\\"dm_mod dm_crypt aes_x86_64 ext2 ext4 vfat intel_agp drm i915\\"' /etc/mkinitcpio.conf
SetValue HOOKS '\\"base udev pata scsi sata usb usbinput keymap consolefont etwo encrypt filesystems\\"' /etc/mkinitcpio.conf
SetValue BINARIES '\\"/usr/bin/gpg\\"' /etc/mkinitcpio.conf
mkinitcpio -p linux
# kernel modules for EFI install
modprobe efivars
modprobe dm-mod
# locale-gen
UncommentValue de_AT /etc/locale.gen
locale-gen
# install and configure grub2
# did this above
#${CHROOT_PACMAN} -Sy
#${CHROOT_PACMAN} -R grub
#rm -rf /boot/grub
#${CHROOT_PACMAN} -S grub2-efi-x86_64
# you can be surprisingly sloppy with the root value you give grub2 as a kernel option and
# even omit the cryptdevice altogether, though it will wag a finger at you for using
# a deprecated syntax, so we're using the correct form here
# NOTE: take out i915.modeset=1 unless you are on intel graphics
SetValue GRUB_CMDLINE_LINUX '\\"cryptdevice=/dev/sda3:root cryptkey=/dev/sda1:vfat:/root.gpg add_efi_memmap i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 pcie_aspm=force quiet\\"' /etc/default/grub
# set output to graphical
SetValue GRUB_TERMINAL_OUTPUT gfxterm /etc/default/grub
SetValue GRUB_GFXMODE 960x600x32,auto /etc/default/grub
SetValue GRUB_GFXPAYLOAD_LINUX keep /etc/default/grub # comment out this value if text only mode
# install the actual grub2. Note that despite our --boot-directory option we will still need to move
# the grub directory to /boot/grub during grub-mkconfig operations until grub2 gets patched (see below)
grub_efi_x86_64-install --bootloader-id=grub --no-floppy --recheck
# create our EFI boot entry
# bug in the HP bios firmware (F.08)
efibootmgr --create --gpt --disk /dev/sda --part 1 --write-signature --label "ARCH LINUX" --loader "\\\\grub\\\\grub.efi"
# copy font for grub2
cp /usr/share/grub/unicode.pf2 /boot/grub
# generate config file
grub-mkconfig -o /boot/grub/grub.cfg
exit
EFI_EOF
# Install EFI using script inside chroot
chroot ${INSTALL_TARGET} /install_efi
rm ${INSTALL_TARGET}/install_efi
# Post install steps
# anything you want to do post install. run the script automatically or
# manually
touch ${INSTALL_TARGET}/post_install
chmod a+x ${INSTALL_TARGET}/post_install
cat > ${INSTALL_TARGET}/post_install <<POST_EOF
set -o errexit
set -o nounset
# functions (these could be a library, but why overcomplicate things
SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?$\${VALUENAME}$=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^$\${VALUENAME}.*$\$/#\1/" "\${FILEPATH}"; }
UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#$\${VALUENAME}.*$\$/\1/" "\${FILEPATH}"; }
# root password
echo -e "${HR}\\nNew root user password\\n${HR}"
passwd
# add user
echo -e "${HR}\\nNew non-root user password (username:${USERNAME})\\n${HR}"
groupadd sudo
useradd -m -g users -G audio,lp,optical,storage,video,games,power,scanner,network,sudo,wheel -s /bin/bash ${USERNAME}
passwd ${USERNAME}
# mirror ranking
echo -e "${HR}\\nRanking Mirrors (this will take a while)\\n${HR}"
cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.orig
mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.all
sed -i "s/#S/S/" /etc/pacman.d/mirrorlist.all
rankmirrors -n 5 /etc/pacman.d/mirrorlist.all > /etc/pacman.d/mirrorlist
# temporary fix for locale.sh update conflict
mv /etc/profile.d/locale.sh /etc/profile.d/locale.sh.preupdate || true
# yaourt repo (add to target pacman, not tmp pacman.conf, for ongoing use)
echo -e "\\n[archlinuxfr]\\nServer = http://repo.archlinux.fr/\\\$arch" >> /etc/pacman.conf
echo -e "\\n[haskell]\\nServer = http://www.kiwilight.com/\\\$repo/\\\$arch" >> /etc/pacman.conf
# additional groups and utilities
pacman --noconfirm -Syu
pacman --noconfirm -S base-devel
pacman --noconfirm -S yaourt
# sudo
pacman --noconfirm -S sudo
cp /etc/sudoers /tmp/sudoers.edit
sed -i "s/#\s*$%wheel\s*ALL=(ALL)\s*ALL.*$$/\1/" /tmp/sudoers.edit
sed -i "s/#\s*$%sudo\s*ALL=(ALL)\s*ALL.*$$/\1/" /tmp/sudoers.edit
visudo -qcsf /tmp/sudoers.edit && cat /tmp/sudoers.edit > /etc/sudoers
# power
pacman --noconfirm -S acpi acpid acpitool cpufrequtils
yaourt --noconfirm -S powertop2
sed -i "/^DAEMONS/ s/)/ @acpid)/" /etc/rc.conf
sed -i "/^MODULES/ s/)/ acpi-cpufreq cpufreq_ondemand cpufreq_powersave coretemp)/" /etc/rc.conf
# following requires my acpi handler script
echo "/etc/acpi/handler.sh boot" > /etc/rc.local
# time
pacman --noconfirm -S ntp
sed -i "/^DAEMONS/ s/hwclock /!hwclock @ntpd /" /etc/rc.conf
# wireless (wpa supplicant should already be installed)
pacman --noconfirm -S iw wpa_supplicant rfkill
pacman --noconfirm -S netcfg wpa_actiond ifplugd
mv /etc/wpa_supplicant.conf /etc/wpa_supplicant.conf.orig
echo -e "ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=network\nupdate_config=1" > /etc/wpa_supplicant.conf
# make sure to copy /etc/network.d/examples/wireless-wpa-config to /etc/network.d/home and edit
sed -i "/^DAEMONS/ s/)/ @net-auto-wireless @net-auto-wired)/" /etc/rc.conf
sed -i "/^DAEMONS/ s/ network / /" /etc/rc.conf
echo -e "\nWIRELESS_INTERFACE=wlan0" >> /etc/rc.conf
echo -e "WIRED_INTERFACE=eth0" >> /etc/rc.conf
echo "options iwlagn led_mode=2" > /etc/modprobe.d/iwlagn.conf
# sound
pacman --noconfirm -S alsa-utils alsa-plugins
sed -i "/^DAEMONS/ s/)/ @alsa)/" /etc/rc.conf
mv /etc/asound.conf /etc/asound.conf.orig || true
#if alsamixer isn't working, try alsamixer -Dhw and speaker-test -Dhw -c 2
# video
pacman --noconfirm -S base-devel mesa mesa-demos
# x
#pacman --noconfirm -S xorg xorg-xinit xorg-utils xorg-server-utils xdotool xorg-xlsfonts
#yaourt --noconfirm -S xf86-input-wacom-git # NOT NEEDED? input-wacom-git
#TODO: cut down the install size
#pacman --noconfirm -S xorg-server xorg-xinit xorg-utils xorg-server-utils
# TODO: wacom
# environment/wm/etc.
#pacman --noconfirm -S xfce4 compiz ccsm
#pacman --noconfirm -S xcompmgr
#yaourt --noconfirm -S physlock unclutter
#pacman --noconfirm -S rxvt-unicode urxvt-url-select hsetroot
#pacman --noconfirm -S gtk2 #gtk3 # for taffybar?
#pacman --noconfirm -S ghc
# note: try installing alex and happy from cabal instead
#pacman --noconfirm -S haskell-platform haskell-hscolour
#yaourt --noconfirm -S xmonad-darcs xmonad-contrib-darcs xcompmgr
#yaourt --noconfirm -S xmobar-git
# TODO: edit xfce to use compiz
# TODO: xmonad, but deal with video tearing
# TODO: xmonad-darcs fails to install from AUR. haskell dependency hell.
# switching to cabal
# fonts
pacman --noconfirm -S terminus-font
yaourt --noconfirm -S webcore-fonts
yaourt --noconfirm -S fontforge libspiro
yaourt --noconfirm -S freetype2-git-infinality
# TODO: sed infinality and change to OSX or OSX2 mode
# and create the sym link from /etc/fonts/conf.avail to conf.d
# misc apps
#pacman --noconfirm -S htop openssh keychain bash-completion git vim
#pacman --noconfirm -S chromium flashplugin
#pacman --noconfirm -S scrot mypaint bc
#yaourt --noconfirm -S task-git stellarium googlecl
# TODO: argyll
POST_EOF
# Post install in chroot
#echo "chroot and run /post_install"
chroot /install /post_install
rm /install/post_install
# copy grub.efi file to the default HP EFI boot manager path
mkdir -p ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/
mkdir -p ${INSTALL_TARGET}/boot/EFI/BOOT/
cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/bootmgfw.efi
cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/BOOT/BOOTX64.EFI
cp /root/root.gpg ${INSTALL_TARGET}/boot/
# NOTES/TODO

Airport Extreme & Remote Access for database application

Hi There,
I have spent an entire week of my time between apple, apple consultants and networking experts trying to get a access remotely to a simple database program inside an wireless network. I have read the discussions on remote access thru the AEBS and port mapping.
I'm hoping an user here can help me with a foolproof solution that the 'apple experts' can seem to design?
All that is required to get this program up and running remotely is the ip address of my computer inside my wireless network. I have set that this computer to a static address but since my dsl provider uses dynamic IP's this doesn't seem to work (or it does for about 12 hours until the IP address of my AEBS is changed). Will port mapping work for me or is my only solution an up-charged static IP?
Thanks in advance for any suggestions......the thought of spending another week on this is frightening!

If your ISP is refreshing the dynamic host configuration of the public ip address assigned to the ISP provided router you will need to request a static ip address from your service provider.
The addresses that are used "inside of your network" are private ip addresses. If you are using the (1) public address for your router (APE)(Apple airport extreme) from the ISP what you are trying to do will not work very well since your router (APE) will use the Public IP address to provide access to the public internet for your private network using the private ip addresses you have used to create your subnet and told your router (APE) about. Three private IP address schemes can be used for a private internet. One for each class. Class A 10.x.x.x/8, Class B 172.16.0.0/12 and Class C 192.168.0.0/24. Translated using dynamic NAT (network address translation with overload) making your LAN hosts using private IP addresses to seem as if they are using a public ip address allowing access to the public internet where only public ip addresses can be used.
PAT (port address translation) is what you are trying to accomplish. For PAT you must have a valid public ip address from your ISP and a private address from your network assigned to interesting host. Use the private ip assigned to the interesting host in the port mapping panel of airport admin that you wish to allow access to via the global internet as well as the tcp or udp port number for the traffic to be directed. For example port 5003 for FileMakerPro or port 20 and 21 for ftp. You should also implement security policies to protect your network and hosts.
Since you said that it works for 12 hours you must have the basics set up correctly. All you need now is to get a static ip address assigned to you from your ISP or use a service such as http://www.dyndns.com/
Hope I didn't ramble on too much

Where best to store encryption key for dbms_crypto?

We want to use dbms_crypto to encrypt pwds.
Thing is with the encryption key. We now store the encryption key in the package itself.
When we deploy the pkg we wrap it.
That gives some security, but if we loose the source code we loose the key and also somebody who has access to the pkg spec can get the key.
What is the solution to this???
We can't store these in tables also since users can read it.

The DBMS_CRYPTO package includes a number of hash routines just as it includes a number of encryption routines.
So, for example, if you wanted to use the SHA-1 hash algorithm to generate a hash for the combination of the user name scott, the password tiger, and some constant salt, you could simply do
SQL> ed
Wrote file afiedt.buf
1 select dbms_crypto.hash( utl_raw.cast_to_raw('scott' || 'some constant salt' || 'tiger') , 3 ) password_hash
2* from dual
SQL> /
PASSWORD_HASH
AF5DFD24A4F70E60D863339E6E27DE21D7771EC1In the future, if you wanted to verify the username and password, you'd simply take the provided username & password along with the same salt, compute the hash, and then compare the hash values to verify that the username & password were correct.
There is no key to manage because the hash algorithm is intended to be a one-way transform. There is no way to get from the hashed value back to the original input string. But that's exactly what you want for a password-- you just want to be able to verify that a user entered the password correctly, you don't want anyone to ever be able to see a user's password.
Ideally, you'd keep the salt relatively private but it doesn't really matter if it gets out. The salt just exists so that you can't download a "rainbow table" where people have pre-computed the hash for various possible passwords (i.e. the SHA-1 hash for the string "password" is well known but if you add more data, people probably haven't precomputed the SHA-1 hash for, say, "jcaveXYZZ12345password" where XYZZ12345 is the salt). Even better would be to generate a different salt for every user and store it in the USERS table.
Justin

I have a MacBook ProDo I have to have the Airport Extreme Base Station for my Airport Express to work?

I cannot get the darn Airport Express to work! It just keeps blinking Amber. I know it must be something silly I am over looking. And I do not have the Airport Extreme Base Station.
Thank you for any help!!!
Elizabeth

Thanks,
This is the rear of your modem/router:
Connect a Cat5e or Cat6 cable from any of the 4 Ethernet Lan ports to the (single) socket on the Express, then go to Airport Utility (Applications>Utilities>Airport Utility) and select create a new network.
You will need to turn the wireless transmiter in the Netgear off, here is a link to the Netgear Manual in case you need to refer to it.
Netgear Manual

AirPort Extreme 802.11n for older Macs?

Are there any plans for Apple to release some sort of upgrade for older Macs so that we can use 802.11n wireless networking?
I have a Power Mac G5 (2.5GHz DP) and a MacBook Pro 17" Core Duo (not Core 2 Duo), so the hardware in my Macs doesn't handle the 802.11n specification. (Please note that I'm not talking about the software enabler. That's not going to work on older hardware.)
Are there plans for new AE cards that can be swapped into the G5s or an ExpressCard 34 card for the laptop?
(And why oh why does the UK government not allow wide channel? UK consumers are stuck with only a 2.5x speed increase, whereas US consumers get the full 5x speed increase.)
Thanks!

802.11n refers to a speedy wireless connection. When
you connect with a wire, you're not using 802.11 at
all. You're using Ethernet, and your Core Duo mac
will connect to the Airport Extreme at 100Mbs (a
little faster than the top speed of 802.11n). Then
The top speed of 802.11n is considerably faster than 100Mbps. In narrow band mode, the Airport Extreme cards are connecting to AE Base Stations (AEBS) at 130Mbs. In wide band mode, 270Mbs. In theory, that makes connecting to the new AEBS device wirelessly faster than via the wired ethernet. It's a design decision that just doesn't make sense in my opinion.

Airport Extreme Encryption Key for TV on OS X Server configuration

Similar Messages

Maybe you are looking for