Where best to store encryption key for dbms_crypto?

We want to use dbms_crypto to encrypt pwds.
Thing is with the encryption key. We now store the encryption key in the package itself.
When we deploy the pkg we wrap it.
That gives some security, but if we loose the source code we loose the key and also somebody who has access to the pkg spec can get the key.
What is the solution to this???
We can't store these in tables also since users can read it.

The DBMS_CRYPTO package includes a number of hash routines just as it includes a number of encryption routines.
So, for example, if you wanted to use the SHA-1 hash algorithm to generate a hash for the combination of the user name scott, the password tiger, and some constant salt, you could simply do
SQL> ed
Wrote file afiedt.buf
1 select dbms_crypto.hash( utl_raw.cast_to_raw('scott' || 'some constant salt' || 'tiger') , 3 ) password_hash
2* from dual
SQL> /
PASSWORD_HASH
AF5DFD24A4F70E60D863339E6E27DE21D7771EC1In the future, if you wanted to verify the username and password, you'd simply take the provided username & password along with the same salt, compute the hash, and then compare the hash values to verify that the username & password were correct.
There is no key to manage because the hash algorithm is intended to be a one-way transform. There is no way to get from the hashed value back to the original input string. But that's exactly what you want for a password-- you just want to be able to verify that a user entered the password correctly, you don't want anyone to ever be able to see a user's password.
Ideally, you'd keep the salt relatively private but it doesn't really matter if it gets out. The salt just exists so that you can't download a "rainbow table" where people have pre-computed the hash for various possible passwords (i.e. the SHA-1 hash for the string "password" is well known but if you add more data, people probably haven't precomputed the SHA-1 hash for, say, "jcaveXYZZ12345password" where XYZZ12345 is the salt). Even better would be to generate a different salt for every user and store it in the USERS table.
Justin

Similar Messages

Where Can I Buy Replacement Keys For Mid 2012 Macbook Pro Retina?

Hi Recently my macbook pros right arrow key fell of, i didnt hit it or anything it just came of. i placed it back on and a day later it fell off agin, now i have lost that key. Where can i buy replacement keys for my mac?
Product
Mid 2012 Macbook Pro 15 inch Retina Display

Ask your local Apple retailer.
Check iFixit.com.
Try searching Google.

System encryption using LUKS and GPG encrypted keys for arch linux

Update: As of 2012-03-28, arch changed from gnupg 1.4 to 2.x which uses pinentry for the password dialog. The "etwo" hook described here doesn't work with gnupg 2. Either use the openssl hook below or use a statically compiled version of gnupg 1.4.
Update: As of 2012-12-19, the mkinitcpio is not called during boot, unless the "install" file for the hook contains "add_runscript". This resulted in an unbootable system for me. Also, the method name was changed from install () to build ().
Update: 2013-01-13: Updated the hook files using the corrections by Deth.
Note: This guide is a bit dated now, in particular the arch installation might be different now. But essentially, the approach stays the same. Please also take a look at the posts further down, specifically the alternative hooks that use openssl.
I always wanted to set up a fully encrypted arch linux server that uses gpg encrypted keyfiles on an external usb stick and luks for root filesystem encryption. I already did it once in gentoo using this guide. For arch, I had to play alot with initcpio hooks and after one day of experimentation, I finally got it working. I wrote a little guide for myself which I'm going to share here for anyone that might be interested. There might be better or easier ways, like I said this is just how I did it. I hope it might help someone else. Constructive feedback is always welcome
Intro
Using arch linux mkinitcpio's encrypt hook, one can easily use encrypted root partitions with LUKS. It's also possible to use key files stored on an external drive, like an usb stick. However, if someone steals your usb stick, he can just copy the key and potentially access the system. I wanted to have a little extra security by additionally encrypting the key file with gpg using a symmetric cipher and a passphrase.
Since the encrypt hook doesn't support this scenario, I created a modifed hook called “etwo” (silly name I know, it was the first thing that came to my mind). It will simply look if the key file has the extension .gpg and, if yes, use gpg to decrypt it, then pipe the result into cryptsetup.
Conventions
In this short guide, I use the following disk/partition names:
/dev/sda: is the hard disk that will contain an encrypted swap (/dev/sda1), /var (/dev/sda2) and root (/dev/sda3) partition.
/dev/sdb is the usb stick that will contain the gpg encrypted luks keys, the kernel and grub. It will have one partition /dev/sdb1 formatted with ext2.
/dev/mapper/root, /dev/mapper/swap and /dev/mapper/var will be the encrypted devices.
Credits
Thanks to the authors of SECURITY_System_Encryption_DM-Crypt_with_LUKS (gentoo wiki), System Encryption with LUKS (arch wiki), mkinitcpio (arch wiki) and Early Userspace in Arch Linux (/dev/brain0 blog)!
Guide
1. Boot the arch live cd
I had to use a newer testing version, because the 2010.05 cd came with a broken gpg. You can download one here: http://releng.archlinux.org/isos/. I chose the “core“ version. Go ahead and boot the live cd, but don't start the setup yet.
2. Set keymap
Use km to set your keymap. This is important for non-qwerty keyboards to avoid suprises with passphrases...
3. Wipe your discs
ATTENTION: this will DELETE everything on /dev/sda and /dev/sdb forever! Do not blame me for any lost data!
Before encrypting the hard disc, it has to be completely wiped and overwritten with random data. I used shred for this. Others use badblocks or dd with /dev/urandom. Either way, this will take a long time, depending on the size of your disc. I also wiped my usb stick just to be sure.
shred -v /dev/sda
shred -v /dev/sdb
4. Partitioning
Fire up fdisk and create the following partitions:
/dev/sda1, type linux swap.
/dev/sda2: type linux
/dev/sda3: type linux
/dev/sdb1, type linux
Of course you can choose a different layout, this is just how I did it. Keep in mind that only the root filesystem will be decrypted by the initcpio. The rest will be decypted during normal init boot using /etc/crypttab, the keys being somewhere on the root filesystem.
5. Format and mount the usb stick
Create an ext2 filesystem on /dev/sdb1:
mkfs.ext2 /dev/sdb1
mkdir /root/usb
mount /dev/sdb1 /root/usb
cd /root/usb # this will be our working directory for now.
Do not mount anything to /mnt, because the arch installer will use that directory later to mount the encrypted root filesystem.
6. Configure the network (if not already done automatically)
ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1
echo "nameserver 192.168.0.1" >> /etc/resolv.conf
(this is just an example, your mileage may vary)
7. Install gnupg
pacman -Sy
pacman -S gnupg
Verify that gnupg works by launching gpg.
8. Create the keys
Just to be sure, make sure swap is off:
cat /proc/swaps
should return no entries.
Create gpg encrypted keys (remember, we're still in our working dir /root/usb):
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > root.gpg
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > var.gpg
Choose a strong password!!
Don't do this in two steps, e.g don't do dd to a file and then gpg on that file. The key should never be stored in plain text on an unencrypted device, except if that device is wiped on system restart (ramfs)!
Note that the default cipher for gpg is cast5, I just chose to use a different one.
9. Create the encrypted devices with cryptsetup
Create encrypted swap:
cryptsetup -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -d /dev/urandom create swap /dev/sda1
You should see /dev/mapper/swap now. Don't format nor turn it on for now. This will be done by the arch installer.
Important: From the Cryptsetup 1.1.2 Release notes:
Cryptsetup can accept passphrase on stdin (standard input). Handling of new line (\n) character is defined by input specification:
if keyfile is specified as "-" (using --key-file=- or by positional argument in luksFormat and luksAddKey, like cat file | cryptsetup --key-file=- <action> ), input is processed
as normal binary file and no new line is interpreted.
if there is no key file specification (with default input from stdin pipe like echo passphrase | cryptsetup <action> ) input is processed as input from terminal, reading will
stop after new line is detected.
If I understand this correctly, since the randomly generated key can contain a newline early on, piping the key into cryptsetup without specifying --key-file=- could result in a big part of the key to be ignored by cryptsetup. Example: if the random key was "foo\nandsomemorebaratheendofthekey", piping it directly into cryptsetup without --key-file=- would result in cryptsetup using only "foo" as key which would have big security implications. We should therefor ALWAYS pipe the key into cryptsetup using --key-file=- which ignores newlines.
gpg -q -d root.gpg 2>/dev/null | cryptsetup -v -–key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool luksFormat /dev/sda3
gpg -q -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -v luksFormat /dev/sda2
Check for any errors.
10. Open the luks devices
gpg -d root.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda3 root
gpg -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda2 var
If you see /dev/mapper/root and /dev/mapper/var now, everything is ok.
11. Start the installer /arch/setup
Follow steps 1 to 3.
At step 4 (Prepare hard drive(s), select “3 – Manually Configure block devices, filesystems and mountpoints. Choose /dev/sdb1 (the usb stick) as /boot, /dev/mapper/swap for swap, /dev/mapper/root for / and /dev/mapper/var for /var.
Format all drives (choose “yes” when asked “do you want to have this filesystem (re)created”) EXCEPT for /dev/sdb1, choose “no”. Choose the correct filesystem for /dev/sdb1, ext2 in my case. Use swap for /dev/mapper/swap. For the rest, I chose ext4.
Select DONE to start formatting.
At step 5 (Select packages), select grub as boot loader. Select the base group. Add mkinitcpio.
Start step 6 (Install packages).
Go to step 7 (Configure System).
By sure to set the correct KEYMAP, LOCALE and TIMEZONE in /etc/rc.conf.
Edit /etc/fstab:
/dev/mapper/root / ext4 defaults 0 1
/dev/mapper/swap swap swap defaults 0 0
/dev/mapper/var /var ext4 defaults 0 1
# /dev/sdb1 /boot ext2 defaults 0 1
Configure the rest normally. When you're done, setup will launch mkinitcpio. We'll manually launch this again later.
Go to step 8 (install boot loader).
Be sure to change the kernel line in menu.lst:
kernel /vmlinuz26 root=/dev/mapper/root cryptdevice=/dev/sda3:root cryptkey=/dev/sdb1:ext2:/root.gpg
Don't forget the :root suffix in cryptdevice!
Also, my root line was set to (hd1,0). Had to change that to
root (hd0,0)
Install grub to /dev/sdb (the usb stick).
Now, we can exit the installer.
12. Install mkinitcpio with the etwo hook.
Create /mnt/lib/initcpio/hooks/etwo:
#!/usr/bin/ash
run_hook() {
/sbin/modprobe -a -q dm-crypt >/dev/null 2>&1
if [ -e "/sys/class/misc/device-mapper" ]; then
if [ ! -e "/dev/mapper/control" ]; then
/bin/mknod "/dev/mapper/control" c $(cat /sys/class/misc/device-mapper/dev | sed 's|:| |')
fi
[ "${quiet}" = "y" ] && CSQUIET=">/dev/null"
# Get keyfile if specified
ckeyfile="/crypto_keyfile"
usegpg="n"
if [ "x${cryptkey}" != "x" ]; then
ckdev="$(echo "${cryptkey}" | cut -d: -f1)"
ckarg1="$(echo "${cryptkey}" | cut -d: -f2)"
ckarg2="$(echo "${cryptkey}" | cut -d: -f3)"
if poll_device "${ckdev}" ${rootdelay}; then
case ${ckarg1} in
*[!0-9]*)
# Use a file on the device
# ckarg1 is not numeric: ckarg1=filesystem, ckarg2=path
if [ "${ckarg2#*.}" = "gpg" ]; then
ckeyfile="${ckeyfile}.gpg"
usegpg="y"
fi
mkdir /ckey
mount -r -t ${ckarg1} ${ckdev} /ckey
dd if=/ckey/${ckarg2} of=${ckeyfile} >/dev/null 2>&1
umount /ckey
# Read raw data from the block device
# ckarg1 is numeric: ckarg1=offset, ckarg2=length
dd if=${ckdev} of=${ckeyfile} bs=1 skip=${ckarg1} count=${ckarg2} >/dev/null 2>&1
esac
fi
[ ! -f ${ckeyfile} ] && echo "Keyfile could not be opened. Reverting to passphrase."
fi
if [ -n "${cryptdevice}" ]; then
DEPRECATED_CRYPT=0
cryptdev="$(echo "${cryptdevice}" | cut -d: -f1)"
cryptname="$(echo "${cryptdevice}" | cut -d: -f2)"
else
DEPRECATED_CRYPT=1
cryptdev="${root}"
cryptname="root"
fi
warn_deprecated() {
echo "The syntax 'root=${root}' where '${root}' is an encrypted volume is deprecated"
echo "Use 'cryptdevice=${root}:root root=/dev/mapper/root' instead."
if poll_device "${cryptdev}" ${rootdelay}; then
if /sbin/cryptsetup isLuks ${cryptdev} >/dev/null 2>&1; then
[ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
dopassphrase=1
# If keyfile exists, try to use that
if [ -f ${ckeyfile} ]; then
if [ "${usegpg}" = "y" ]; then
# gpg tty fixup
if [ -e /dev/tty ]; then mv /dev/tty /dev/tty.backup; fi
cp -a /dev/console /dev/tty
while [ ! -e /dev/mapper/${cryptname} ];
do
sleep 2
/usr/bin/gpg -d "${ckeyfile}" 2>/dev/null | cryptsetup --key-file=- luksOpen ${cryptdev} ${cryptname} ${CSQUIET}
dopassphrase=0
done
rm /dev/tty
if [ -e /dev/tty.backup ]; then mv /dev/tty.backup /dev/tty; fi
else
if eval /sbin/cryptsetup --key-file ${ckeyfile} luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; then
dopassphrase=0
else
echo "Invalid keyfile. Reverting to passphrase."
fi
fi
fi
# Ask for a passphrase
if [ ${dopassphrase} -gt 0 ]; then
echo ""
echo "A password is required to access the ${cryptname} volume:"
#loop until we get a real password
while ! eval /sbin/cryptsetup luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; do
sleep 2;
done
fi
if [ -e "/dev/mapper/${cryptname}" ]; then
if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
export root="/dev/mapper/root"
fi
else
err "Password succeeded, but ${cryptname} creation failed, aborting..."
exit 1
fi
elif [ -n "${crypto}" ]; then
[ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
msg "Non-LUKS encrypted device found..."
if [ $# -ne 5 ]; then
err "Verify parameter format: crypto=hash:cipher:keysize:offset:skip"
err "Non-LUKS decryption not attempted..."
return 1
fi
exe="/sbin/cryptsetup create ${cryptname} ${cryptdev}"
tmp=$(echo "${crypto}" | cut -d: -f1)
[ -n "${tmp}" ] && exe="${exe} --hash \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f2)
[ -n "${tmp}" ] && exe="${exe} --cipher \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f3)
[ -n "${tmp}" ] && exe="${exe} --key-size \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f4)
[ -n "${tmp}" ] && exe="${exe} --offset \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f5)
[ -n "${tmp}" ] && exe="${exe} --skip \"${tmp}\""
if [ -f ${ckeyfile} ]; then
exe="${exe} --key-file ${ckeyfile}"
else
exe="${exe} --verify-passphrase"
echo ""
echo "A password is required to access the ${cryptname} volume:"
fi
eval "${exe} ${CSQUIET}"
if [ $? -ne 0 ]; then
err "Non-LUKS device decryption failed. verify format: "
err " crypto=hash:cipher:keysize:offset:skip"
exit 1
fi
if [ -e "/dev/mapper/${cryptname}" ]; then
if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
export root="/dev/mapper/root"
fi
else
err "Password succeeded, but ${cryptname} creation failed, aborting..."
exit 1
fi
else
err "Failed to open encryption mapping: The device ${cryptdev} is not a LUKS volume and the crypto= paramater was not specified."
fi
fi
rm -f ${ckeyfile}
fi
Create /mnt/lib/initcpio/install/etwo:
#!/bin/bash
build() {
local mod
add_module dm-crypt
if [[ $CRYPTO_MODULES ]]; then
for mod in $CRYPTO_MODULES; do
add_module "$mod"
done
else
add_all_modules '/crypto/'
fi
add_dir "/dev/mapper"
add_binary "cryptsetup"
add_binary "dmsetup"
add_binary "/usr/bin/gpg"
add_file "/usr/lib/udev/rules.d/10-dm.rules"
add_file "/usr/lib/udev/rules.d/13-dm-disk.rules"
add_file "/usr/lib/udev/rules.d/95-dm-notify.rules"
add_file "/usr/lib/initcpio/udev/11-dm-initramfs.rules" "/usr/lib/udev/rules.d/11-dm-initramfs.rules"
add_runscript
help ()
cat<<HELPEOF
This hook allows for an encrypted root device with support for gpg encrypted key files.
To use gpg, the key file must have the extension .gpg and you have to install gpg and add /usr/bin/gpg
to your BINARIES var in /etc/mkinitcpio.conf.
HELPEOF
Edit /mnt/etc/mkinitcpio.conf (only relevant sections displayed):
MODULES=”ext2 ext4” # not sure if this is really nessecary.
BINARIES=”/usr/bin/gpg” # this could probably be done in install/etwo...
HOOKS=”base udev usbinput keymap autodetect pata scsi sata usb etwo filesystems” # (usbinput is only needed if you have an usb keyboard)
Copy the initcpio stuff over to the live cd:
cp /mnt/lib/initcpio/hooks/etwo /lib/initcpio/hooks/
cp /mnt/lib/initcpio/install/etwo /lib/initcpio/install/
cp /mnt/etc/mkinitcpio.conf /etc/
Verify your LOCALE, KEYMAP and TIMEZONE in /etc/rc.conf!
Now reinstall the initcpio:
mkinitcpio -g /mnt/boot/kernel26.img
Make sure there were no errors and that all hooks were included.
13. Decrypt the "var" key to the encrypted root
mkdir /mnt/keys
chmod 500 /mnt/keys
gpg –output /mnt/keys/var -d /mnt/boot/var.gpg
chmod 400 /mnt/keys/var
14. Setup crypttab
Edit /mnt/etc/crypttab:
swap /dev/sda1 SWAP -c aes-cbc-essiv:sha256 -s 256 -h whirlpool
var /dev/sda2 /keys/var
15. Reboot
We're done, you may reboot. Make sure you select the usb stick as the boot device in your bios and hope for the best. . If it didn't work, play with grub's settings or boot from the live cd, mount your encrypted devices and check all settings. You might also have less trouble by using uuid's instead of device names. I chose device names to keep things as simple as possible, even though it's not the optimal way to do it.
Make backups of your data and your usb stick and do not forget your password(s)! Or you can say goodbye to your data forever...
Last edited by fabriceb (2013-01-15 22:36:23)

I'm trying to run my install script that is based on https://bbs.archlinux.org/viewtopic.php?id=129885
Decrypting the gpg key after grub works, but then "Devce root already exists." appears every second.
any idea ?
#!/bin/bash
# This script is designed to be run in conjunction with a UEFI boot using Archboot intall media.
# prereqs:
# EFI "BIOS" set to boot *only* from EFI
# successful EFI boot of Archboot USB
# mount /dev/sdb1 /src
set -o nounset
#set -o errexit
# Host specific configuration
# this whole script needs to be customized, particularly disk partitions
# and configuration, but this section contains global variables that
# are used during the system configuration phase for convenience
HOSTNAME=daniel
USERNAME=user
# Globals
# We don't need to set these here but they are used repeatedly throughout
# so it makes sense to reuse them and allow an easy, one-time change if we
# need to alter values such as the install target mount point.
INSTALL_TARGET="/install"
HR="--------------------------------------------------------------------------------"
PACMAN="pacman --noconfirm --config /tmp/pacman.conf"
TARGET_PACMAN="pacman --noconfirm --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
CHROOT_PACMAN="pacman --noconfirm --cachedir /var/cache/pacman/pkg --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
FILE_URL="file:///packages/core-$(uname -m)/pkg"
FTP_URL='ftp://mirrors.kernel.org/archlinux/$repo/os/$arch'
HTTP_URL='http://mirrors.kernel.org/archlinux/$repo/os/$arch'
# Functions
# I've avoided using functions in this script as they aren't required and
# I think it's more of a learning tool if you see the step-by-step
# procedures even with minor duplciations along the way, but I feel that
# these functions clarify the particular steps of setting values in config
# files.
SetValue () {
# EXAMPLE: SetValue VARIABLENAME '\"Quoted Value\"' /file/path
VALUENAME="$1" NEWVALUE="$2" FILEPATH="$3"
sed -i "s+^#\?$${VALUENAME}$=.*$+\1=${NEWVALUE}+" "${FILEPATH}"
CommentOutValue () {
VALUENAME="$1" FILEPATH="$2"
sed -i "s/^$${VALUENAME}.*$$/#\1/" "${FILEPATH}"
UncommentValue () {
VALUENAME="$1" FILEPATH="$2"
sed -i "s/^#$${VALUENAME}.*$$/\1/" "${FILEPATH}"
# Initialize
# Warn the user about impending doom, set up the network on eth0, mount
# the squashfs images (Archboot does this normally, we're just filling in
# the gaps resulting from the fact that we're doing a simple scripted
# install). We also create a temporary pacman.conf that looks for packages
# locally first before sourcing them from the network. It would be better
# to do either *all* local or *all* network but we can't for two reasons.
# 1. The Archboot installation image might have an out of date kernel
# (currently the case) which results in problems when chrooting
# into the install mount point to modprobe efivars. So we use the
# package snapshot on the Archboot media to ensure our kernel is
# the same as the one we booted with.
# 2. Ideally we'd source all local then, but some critical items,
# notably grub2-efi variants, aren't yet on the Archboot media.
# Warn
timer=9
echo -e "\n\nMAC WARNING: This script is not designed for APPLE MAC installs and will potentially misconfigure boot to your existing OS X installation. STOP NOW IF YOU ARE ON A MAC.\n\n"
echo -n "GENERAL WARNING: This procedure will completely format /dev/sda. Please cancel with ctrl-c to cancel within $timer seconds..."
while [[ $timer -gt 0 ]]
do
sleep 1
let timer-=1
echo -en "$timer seconds..."
done
echo "STARTING"
# Get Network
echo -n "Waiting for network address.."
#dhclient eth0
dhcpcd -p eth0
echo -n "Network address acquired."
# Mount packages squashfs images
umount "/packages/core-$(uname -m)"
umount "/packages/core-any"
rm -rf "/packages/core-$(uname -m)"
rm -rf "/packages/core-any"
mkdir -p "/packages/core-$(uname -m)"
mkdir -p "/packages/core-any"
modprobe -q loop
modprobe -q squashfs
mount -o ro,loop -t squashfs "/src/packages/archboot_packages_$(uname -m).squashfs" "/packages/core-$(uname -m)"
mount -o ro,loop -t squashfs "/src/packages/archboot_packages_any.squashfs" "/packages/core-any"
# Create temporary pacman.conf file
cat << PACMANEOF > /tmp/pacman.conf
[options]
Architecture = auto
CacheDir = ${INSTALL_TARGET}/var/cache/pacman/pkg
CacheDir = /packages/core-$(uname -m)/pkg
CacheDir = /packages/core-any/pkg
[core]
Server = ${FILE_URL}
Server = ${FTP_URL}
Server = ${HTTP_URL}
[extra]
Server = ${FILE_URL}
Server = ${FTP_URL}
Server = ${HTTP_URL}
#Uncomment to enable pacman -Sy yaourt
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
PACMANEOF
# Prepare pacman
[[ ! -d "${INSTALL_TARGET}/var/cache/pacman/pkg" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/cache/pacman/pkg"
[[ ! -d "${INSTALL_TARGET}/var/lib/pacman" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/lib/pacman"
${PACMAN} -Sy
${TARGET_PACMAN} -Sy
# Install prereqs from network (not on archboot media)
echo -e "\nInstalling prereqs...\n$HR"
#sed -i "s/^#S/S/" /etc/pacman.d/mirrorlist # Uncomment all Server lines
UncommentValue S /etc/pacman.d/mirrorlist # Uncomment all Server lines
${PACMAN} --noconfirm -Sy gptfdisk btrfs-progs-unstable libusb-compat gnupg
# Configure Host
# Here we create three partitions:
# 1. efi and /boot (one partition does double duty)
# 2. swap
# 3. our encrypted root
# Note that all of these are on a GUID partition table scheme. This proves
# to be quite clean and simple since we're not doing anything with MBR
# boot partitions and the like.
echo -e "format\n"
# shred -v /dev/sda
# disk prep
sgdisk -Z /dev/sda # zap all on disk
#sgdisk -Z /dev/mmcb1k0 # zap all on sdcard
sgdisk -a 2048 -o /dev/sda # new gpt disk 2048 alignment
#sgdisk -a 2048 -o /dev/mmcb1k0
# create partitions
sgdisk -n 1:0:+200M /dev/sda # partition 1 (UEFI BOOT), default start block, 200MB
sgdisk -n 2:0:+4G /dev/sda # partition 2 (SWAP), default start block, 200MB
sgdisk -n 3:0:0 /dev/sda # partition 3, (LUKS), default start, remaining space
#sgdisk -n 1:0:1800M /dev/mmcb1k0 # root.gpg
# set partition types
sgdisk -t 1:ef00 /dev/sda
sgdisk -t 2:8200 /dev/sda
sgdisk -t 3:8300 /dev/sda
#sgdisk -t 1:0700 /dev/mmcb1k0
# label partitions
sgdisk -c 1:"UEFI Boot" /dev/sda
sgdisk -c 2:"Swap" /dev/sda
sgdisk -c 3:"LUKS" /dev/sda
#sgdisk -c 1:"Key" /dev/mmcb1k0
echo -e "create gpg file\n"
# create gpg file
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > /root/root.gpg
echo -e "format LUKS on root\n"
# format LUKS on root
gpg -q -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- -c aes-xts-plain -s 512 --hash sha512 luksFormat /dev/sda3
echo -e "open LUKS on root\n"
gpg -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- luksOpen /dev/sda3 root
# NOTE: make sure to add dm_crypt and aes_i586 to MODULES in rc.conf
# NOTE2: actually this isn't required since we're mounting an encrypted root and grub2/initramfs handles this before we even get to rc.conf
# make filesystems
# following swap related commands not used now that we're encrypting our swap partition
#mkswap /dev/sda2
#swapon /dev/sda2
#mkfs.ext4 /dev/sda3 # this is where we'd create an unencrypted root partition, but we're using luks instead
echo -e "\nCreating Filesystems...\n$HR"
# make filesystems
mkfs.ext4 /dev/mapper/root
mkfs.vfat -F32 /dev/sda1
#mkfs.vfat -F32 /dev/mmcb1k0p1
echo -e "mount targets\n"
# mount target
#mount /dev/sda3 ${INSTALL_TARGET} # this is where we'd mount the unencrypted root partition
mount /dev/mapper/root ${INSTALL_TARGET}
# mount target
mkdir ${INSTALL_TARGET}
# mkdir ${INSTALL_TARGET}/key
# mount -t vfat /dev/mmcb1k0p1 ${INSTALL_TARGET}/key
mkdir ${INSTALL_TARGET}/boot
mount -t vfat /dev/sda1 ${INSTALL_TARGET}/boot
# Install base, necessary utilities
mkdir -p ${INSTALL_TARGET}/var/lib/pacman
${TARGET_PACMAN} -Sy
${TARGET_PACMAN} -Su base
# curl could be installed later but we want it ready for rankmirrors
${TARGET_PACMAN} -S curl
${TARGET_PACMAN} -S libusb-compat gnupg
${TARGET_PACMAN} -R grub
rm -rf ${INSTALL_TARGET}/boot/grub
${TARGET_PACMAN} -S grub2-efi-x86_64
# Configure new system
SetValue HOSTNAME ${HOSTNAME} ${INSTALL_TARGET}/etc/rc.conf
sed -i "s/^$127\.0\.0\.1.*$$/\1 ${HOSTNAME}/" ${INSTALL_TARGET}/etc/hosts
SetValue CONSOLEFONT Lat2-Terminus16 ${INSTALL_TARGET}/etc/rc.conf
#following replaced due to netcfg
#SetValue interface eth0 ${INSTALL_TARGET}/etc/rc.conf
# write fstab
# You can use UUID's or whatever you want here, of course. This is just
# the simplest approach and as long as your drives aren't changing values
# randomly it should work fine.
cat > ${INSTALL_TARGET}/etc/fstab <<FSTAB_EOF
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sda1 /boot vfat defaults 0 0
/dev/mapper/cryptswap none swap defaults 0 0
/dev/mapper/root / ext4 defaults,noatime 0 1
FSTAB_EOF
# write etwo
mkdir -p /lib/initcpio/hooks/
mkdir -p /lib/initcpio/install/
cp /src/etwo_hooks /lib/initcpio/hooks/etwo
cp /src/etwo_install /lib/initcpio/install/etwo
mkdir -p ${INSTALL_TARGET}/lib/initcpio/hooks/
mkdir -p ${INSTALL_TARGET}/lib/initcpio/install/
cp /src/etwo_hooks ${INSTALL_TARGET}/lib/initcpio/hooks/etwo
cp /src/etwo_install ${INSTALL_TARGET}/lib/initcpio/install/etwo
# write crypttab
# encrypted swap (random passphrase on boot)
echo cryptswap /dev/sda2 SWAP "-c aes-xts-plain -h whirlpool -s 512" >> ${INSTALL_TARGET}/etc/crypttab
# copy configs we want to carry over to target from install environment
mv ${INSTALL_TARGET}/etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf.orig
cp /etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf
mkdir -p ${INSTALL_TARGET}/tmp
cp /tmp/pacman.conf ${INSTALL_TARGET}/tmp/pacman.conf
# mount proc, sys, dev in install root
mount -t proc proc ${INSTALL_TARGET}/proc
mount -t sysfs sys ${INSTALL_TARGET}/sys
mount -o bind /dev ${INSTALL_TARGET}/dev
echo -e "umount boot\n"
# we have to remount /boot from inside the chroot
umount ${INSTALL_TARGET}/boot
# Create install_efi script (to be run *after* chroot /install)
touch ${INSTALL_TARGET}/install_efi
chmod a+x ${INSTALL_TARGET}/install_efi
cat > ${INSTALL_TARGET}/install_efi <<EFI_EOF
# functions (these could be a library, but why overcomplicate things
SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?$\${VALUENAME}$=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^$\${VALUENAME}.*$\$/#\1/" "\${FILEPATH}"; }
UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#$\${VALUENAME}.*$\$/\1/" "\${FILEPATH}"; }
echo -e "mount boot\n"
# remount here or grub et al gets confused
mount -t vfat /dev/sda1 /boot
# mkinitcpio
# NOTE: intel_agp drm and i915 for intel graphics
SetValue MODULES '\\"dm_mod dm_crypt aes_x86_64 ext2 ext4 vfat intel_agp drm i915\\"' /etc/mkinitcpio.conf
SetValue HOOKS '\\"base udev pata scsi sata usb usbinput keymap consolefont etwo encrypt filesystems\\"' /etc/mkinitcpio.conf
SetValue BINARIES '\\"/usr/bin/gpg\\"' /etc/mkinitcpio.conf
mkinitcpio -p linux
# kernel modules for EFI install
modprobe efivars
modprobe dm-mod
# locale-gen
UncommentValue de_AT /etc/locale.gen
locale-gen
# install and configure grub2
# did this above
#${CHROOT_PACMAN} -Sy
#${CHROOT_PACMAN} -R grub
#rm -rf /boot/grub
#${CHROOT_PACMAN} -S grub2-efi-x86_64
# you can be surprisingly sloppy with the root value you give grub2 as a kernel option and
# even omit the cryptdevice altogether, though it will wag a finger at you for using
# a deprecated syntax, so we're using the correct form here
# NOTE: take out i915.modeset=1 unless you are on intel graphics
SetValue GRUB_CMDLINE_LINUX '\\"cryptdevice=/dev/sda3:root cryptkey=/dev/sda1:vfat:/root.gpg add_efi_memmap i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 pcie_aspm=force quiet\\"' /etc/default/grub
# set output to graphical
SetValue GRUB_TERMINAL_OUTPUT gfxterm /etc/default/grub
SetValue GRUB_GFXMODE 960x600x32,auto /etc/default/grub
SetValue GRUB_GFXPAYLOAD_LINUX keep /etc/default/grub # comment out this value if text only mode
# install the actual grub2. Note that despite our --boot-directory option we will still need to move
# the grub directory to /boot/grub during grub-mkconfig operations until grub2 gets patched (see below)
grub_efi_x86_64-install --bootloader-id=grub --no-floppy --recheck
# create our EFI boot entry
# bug in the HP bios firmware (F.08)
efibootmgr --create --gpt --disk /dev/sda --part 1 --write-signature --label "ARCH LINUX" --loader "\\\\grub\\\\grub.efi"
# copy font for grub2
cp /usr/share/grub/unicode.pf2 /boot/grub
# generate config file
grub-mkconfig -o /boot/grub/grub.cfg
exit
EFI_EOF
# Install EFI using script inside chroot
chroot ${INSTALL_TARGET} /install_efi
rm ${INSTALL_TARGET}/install_efi
# Post install steps
# anything you want to do post install. run the script automatically or
# manually
touch ${INSTALL_TARGET}/post_install
chmod a+x ${INSTALL_TARGET}/post_install
cat > ${INSTALL_TARGET}/post_install <<POST_EOF
set -o errexit
set -o nounset
# functions (these could be a library, but why overcomplicate things
SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?$\${VALUENAME}$=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^$\${VALUENAME}.*$\$/#\1/" "\${FILEPATH}"; }
UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#$\${VALUENAME}.*$\$/\1/" "\${FILEPATH}"; }
# root password
echo -e "${HR}\\nNew root user password\\n${HR}"
passwd
# add user
echo -e "${HR}\\nNew non-root user password (username:${USERNAME})\\n${HR}"
groupadd sudo
useradd -m -g users -G audio,lp,optical,storage,video,games,power,scanner,network,sudo,wheel -s /bin/bash ${USERNAME}
passwd ${USERNAME}
# mirror ranking
echo -e "${HR}\\nRanking Mirrors (this will take a while)\\n${HR}"
cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.orig
mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.all
sed -i "s/#S/S/" /etc/pacman.d/mirrorlist.all
rankmirrors -n 5 /etc/pacman.d/mirrorlist.all > /etc/pacman.d/mirrorlist
# temporary fix for locale.sh update conflict
mv /etc/profile.d/locale.sh /etc/profile.d/locale.sh.preupdate || true
# yaourt repo (add to target pacman, not tmp pacman.conf, for ongoing use)
echo -e "\\n[archlinuxfr]\\nServer = http://repo.archlinux.fr/\\\$arch" >> /etc/pacman.conf
echo -e "\\n[haskell]\\nServer = http://www.kiwilight.com/\\\$repo/\\\$arch" >> /etc/pacman.conf
# additional groups and utilities
pacman --noconfirm -Syu
pacman --noconfirm -S base-devel
pacman --noconfirm -S yaourt
# sudo
pacman --noconfirm -S sudo
cp /etc/sudoers /tmp/sudoers.edit
sed -i "s/#\s*$%wheel\s*ALL=(ALL)\s*ALL.*$$/\1/" /tmp/sudoers.edit
sed -i "s/#\s*$%sudo\s*ALL=(ALL)\s*ALL.*$$/\1/" /tmp/sudoers.edit
visudo -qcsf /tmp/sudoers.edit && cat /tmp/sudoers.edit > /etc/sudoers
# power
pacman --noconfirm -S acpi acpid acpitool cpufrequtils
yaourt --noconfirm -S powertop2
sed -i "/^DAEMONS/ s/)/ @acpid)/" /etc/rc.conf
sed -i "/^MODULES/ s/)/ acpi-cpufreq cpufreq_ondemand cpufreq_powersave coretemp)/" /etc/rc.conf
# following requires my acpi handler script
echo "/etc/acpi/handler.sh boot" > /etc/rc.local
# time
pacman --noconfirm -S ntp
sed -i "/^DAEMONS/ s/hwclock /!hwclock @ntpd /" /etc/rc.conf
# wireless (wpa supplicant should already be installed)
pacman --noconfirm -S iw wpa_supplicant rfkill
pacman --noconfirm -S netcfg wpa_actiond ifplugd
mv /etc/wpa_supplicant.conf /etc/wpa_supplicant.conf.orig
echo -e "ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=network\nupdate_config=1" > /etc/wpa_supplicant.conf
# make sure to copy /etc/network.d/examples/wireless-wpa-config to /etc/network.d/home and edit
sed -i "/^DAEMONS/ s/)/ @net-auto-wireless @net-auto-wired)/" /etc/rc.conf
sed -i "/^DAEMONS/ s/ network / /" /etc/rc.conf
echo -e "\nWIRELESS_INTERFACE=wlan0" >> /etc/rc.conf
echo -e "WIRED_INTERFACE=eth0" >> /etc/rc.conf
echo "options iwlagn led_mode=2" > /etc/modprobe.d/iwlagn.conf
# sound
pacman --noconfirm -S alsa-utils alsa-plugins
sed -i "/^DAEMONS/ s/)/ @alsa)/" /etc/rc.conf
mv /etc/asound.conf /etc/asound.conf.orig || true
#if alsamixer isn't working, try alsamixer -Dhw and speaker-test -Dhw -c 2
# video
pacman --noconfirm -S base-devel mesa mesa-demos
# x
#pacman --noconfirm -S xorg xorg-xinit xorg-utils xorg-server-utils xdotool xorg-xlsfonts
#yaourt --noconfirm -S xf86-input-wacom-git # NOT NEEDED? input-wacom-git
#TODO: cut down the install size
#pacman --noconfirm -S xorg-server xorg-xinit xorg-utils xorg-server-utils
# TODO: wacom
# environment/wm/etc.
#pacman --noconfirm -S xfce4 compiz ccsm
#pacman --noconfirm -S xcompmgr
#yaourt --noconfirm -S physlock unclutter
#pacman --noconfirm -S rxvt-unicode urxvt-url-select hsetroot
#pacman --noconfirm -S gtk2 #gtk3 # for taffybar?
#pacman --noconfirm -S ghc
# note: try installing alex and happy from cabal instead
#pacman --noconfirm -S haskell-platform haskell-hscolour
#yaourt --noconfirm -S xmonad-darcs xmonad-contrib-darcs xcompmgr
#yaourt --noconfirm -S xmobar-git
# TODO: edit xfce to use compiz
# TODO: xmonad, but deal with video tearing
# TODO: xmonad-darcs fails to install from AUR. haskell dependency hell.
# switching to cabal
# fonts
pacman --noconfirm -S terminus-font
yaourt --noconfirm -S webcore-fonts
yaourt --noconfirm -S fontforge libspiro
yaourt --noconfirm -S freetype2-git-infinality
# TODO: sed infinality and change to OSX or OSX2 mode
# and create the sym link from /etc/fonts/conf.avail to conf.d
# misc apps
#pacman --noconfirm -S htop openssh keychain bash-completion git vim
#pacman --noconfirm -S chromium flashplugin
#pacman --noconfirm -S scrot mypaint bc
#yaourt --noconfirm -S task-git stellarium googlecl
# TODO: argyll
POST_EOF
# Post install in chroot
#echo "chroot and run /post_install"
chroot /install /post_install
rm /install/post_install
# copy grub.efi file to the default HP EFI boot manager path
mkdir -p ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/
mkdir -p ${INSTALL_TARGET}/boot/EFI/BOOT/
cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/bootmgfw.efi
cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/BOOT/BOOTX64.EFI
cp /root/root.gpg ${INSTALL_TARGET}/boot/
# NOTES/TODO

Airport Extreme Encryption Key for TV on OS X Server configuration

I have a Airport Extreme last model 5th generation, which is controlled by the OS X Server 2.2.1 on Mountain Lion 10.8.2. I´m running in a small structured Home Network. To go in i have always to input a User Name and Password, that works perfectly with OS X or Windows computers, as well as iPhone, iPad, and also my NAS system.
The problem is with my TV-set, it is a Panasonic and should connect via Wi-Fi, but it ask for the Network Encryption Key ! i tried to enter the Airport Password, but no success . also i tried look around google and the solutions were around the Airport Utility App, which was last year re-vamped and those solutions can not be used
any suggestion, where can i find my Network Encryption Key is welcome
thanks

yes, it is the right way
i start the Guest Wi-Fi Network with WPA2 Personal and it rocks
the problem, or not, i build a secure Network at home manage by the Server and not i open a Guest Hole dont know what are the risks in this Guest connection.
thanks anyway, your sugestion works

SP2010 Secure Store Encryption Key Must Be Refreshed After Reboots

We use a Secure Store Service Application for several external connections. All else appears normal, however, we frequently find that the master encryption key requires a manual refresh. In the meantime, the secure store service application is
non-functional, and of course so is everything beyond it, for users.
The issue has been occurring since we set SSSA up months ago. It's been difficult to pinpoint exactly the types of actions that produce this state. It appears common that a reboot of the SharePoint server (all-inclusive, one server in farm, SQL
services elsewhere on different server) triggers the need for a key refresh. We have reproduced the issue each of the past two nights, with scheduled reboots.
When in Central Administration, the Secure Store Service Application page shows "Unable to obtain master key".
If we try to access a data connection beyond the SSSA, Windows logs receive a few events:
Windows Application log shows Event ID 7522 from Secure Store, saying "[...] encountered a failure while restoring the encryption key. The error returned was: 'Exception of type 'Microsoft.Office.SecureStoreService.Server.KeyManagement.InvalidMasterKeyException'
was thrown.'."
Another event, ID 7535 is also thrown: "[...] failed to retrieve the master secret key. The error returned was: 'Unable to obtain master key.'"
Any help or insight is greatly appreciated!

Hi John,
After you create the Secure Store service application and the proxy, you have to refresh the encryption key.Here is the steps to refresh the encryption key:
1.On the Central Administration home page, in the Application Management section, click
Manage service applications.
2.Click the Secure Store service application.
3.In the Key Management group, click Refresh Key.
4.In the Pass Phrase box, type the pass phrase that you first used to generate the encryption key.
This phrase is either the pass phrase that you used when you initialized the Secure Store Service service application or one that you used when you created a new key by using the
Generate a New Key command.
5.Click OK.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Where I could get Registration Key for ProtectLink ?

Register Your Product
Please enter your Registration Key (for example xx-xxxx-xxxxxx-xxxxxx) below and                                                                  click Next
Contact your reseller if you cannot locate your Registration Key.
If you are a current ProtectLink Gateway user, and have purchased another                                                                  router,
Click here
to register                                                                  the new router.
For further assistance, contact www.cisco.com/support

www.cisco.com/go/protectlink
in the middle of the page it mentions the 30day trial.
1year and 3year licenses can be bought from your local Cisco Sb distributor.
or from any Online Retailer
http://www.amazon.com/Cisco-L-PLEP-25-3YR-Protectlink-Incremental-LPLEP253YR/dp/B0046SKRSW/ref=sr_1_15?ie=UTF8&qid=1295006936&sr=8-15
(if it wouldn't show 'currently unavaible)
Hope it helps
Jo

Where can I buy replacement keys for my keyboard??

Two of my keys are broken on my laptop (stupid cat broke them off, long story short), and I want to replace them. This seems like a pretty idiotproof task, but for some reason Apple wants me to bring everything into one of their stores.
This is kindof a hassle at the moment, and I'm a little annoyed that they won't just let me buy the d@rn things - does anyone know of a place online where I can just order the two keys, get them sent to me, and take care of this in the privacy of my own home??

Here's some helpful laptop sites.
Fix It Guides for Mac Laptops & Mini
http://www.ifixit.com/Guide/
The guides can be viewed on-line or you can download a PDF file.
How to Upgrade, Repair, Disassemble an Apple/Macintosh Laptop or Notebook
http://repair4laptop.org/disassembly_apple.html
PowerBookTech
http://www.powerbooktech.com/
(Note - PowerBookTech has some good info, however, some Mac users in other forums were having difficulty getting delivery on parts from them.)
How to Upgrade, Repair, Disassemble an Apple/Macintosh Laptop or Notebook
http://repair4laptop.org/disassembly_apple.html
Laptop Repair Guides
http://www.applerepairmanuals.com/#portables
Another suggestion. You can join join LEM-Swap for buying & selling Mac stuff. http://groups.google.com/group/lemswap
After you join, post a WTB (want to buy). Someone may have a non-operational keyboard or just the keys you need.
Cheers, Tom
 Cheers, Tom

Where do I find replacement keys for Macbook Pro late '11?

My T-button is very loose and falls off as I type. I can see that the button is slightly broken underneath where it connects to the hinge. I want to buy/get a new key - where do I buy this?

You can try an Apple store genius bar and see if they can help, and also try on-line at www.iFixit.com as they have a lot of parts for sale.

How to create an encrypted key for a user table

I have an airshow website where volunteers and vendors can apply online (www.hollisterairshow.com) . The city attorney requires that we have a wet signature on a printed application form so the volunteer/ vendor currently has to print their application at the time they apply online, then sign it and mail it in and this works fine. Unfortunately, we have had a lot of instances where volunteers/ vendors needed to print their application again and the only way we could do this was for an administrator to print their application to a pdf file and e-mail the file to them. So, I'd like to improve this process by automatically sending an e-mail to the applicant when they apply online with a link to a printable page and containing a key pointing to their application. This way, volunteers/ vendors could print and sign their application whenever they want and as many times as they need to. Each volunteer is a single row in a volunteer table and each vendor is a single row in a vendor table.
The key I use in the tables is a sequential key automatically incremented by MySQL so I would end up sending them a link looking something like www.hollisterairshow.com/printvolunteerapp.php?volunteernumber=27 . This would work, but it wouldn't be hard for a volunteer to change it to a different volunteernumber and so get access to someone else's personal information, which would not be acceptable. So, I'm thinking I need a secondary key that is somehow scrambled and used as an secondary index in the table so I'd be sending a link that mght look like www.hollisterairshow.com/printvolunteerapp.php?volunteerkey=sygew . So I'd really appreciate some advice on how to create a scrambled secondary index for each volunteer or vendor and plug it into the link I send them in the e-mail.
Thanks for any advice.
Tony

Your question is not clear whether you want to create account or you want to create agent.
For creating local agent you can refer
http://bhabaniranjan.com/configure-odi-11g-local-agent/
For creating EE Agent you can refer
http://bhabaniranjan.com/configure-odi-java-ee-agent-on-windows-server-2008-64-bit/
For creating account, login to supervisor and then go to security tab. There you can create different user to login to odi Studio. Let me know If i understand you correctly or not.
Thanks.

App Store "Option key for purchase" does not work to reinsatll Lion

Hello,
I was able to re-install Lion from the App Store
by holding the "option key" while clicking on "Prchased" in the App store
Since I upgraded to 10.7.1 this does not work anymore !
Is it the upgrade to 10.7.1 that"s preventing a new download ?
or
Is it Apple that cancelled that access ?
One way or the other how do I reinsatll Lion ?
Note: I have too many partition on my drive, so it did not create a "restore HD" for LIon
Thanks

My problem was resolved the following day, today. I went to the App Store then to Purchased. The associated button said Resume. Yesterday that had been totally unresponsive but today when I clicked it the download resumed for another minute or two and then Lion just installed. I presume that the system was just being pushed to the limit and beyond yeasterday.
I hope that you have solved your difficulty - good luck!

Where does FCPX store files converted for YouTube etc?

FCPX clearly does some kind of conversion/compression before uploading a video to YouTube. I wondered where the resultant files were kept?

I wondered too. So I shared something to Vimeo and it created a Shared Items folder inside the Final Cut Projects folder inside the folder for the project shared. The .mov file is in there.

Need help. Need to store single key for 2 values

Hi,
I need to store 2 value objects with only one key value. How do I do that?

Use an array of length 2 or a class like this:class Pair {
    private Object a;
    private Object b;
    public Pair (Object a, Object b) {
        this.a = a;
        this.b = b;
    public Object getA () {
        return a;
    public Object getB () {
        return b;
}Kind regards,
Levi

Where best to store photos

I recently migrated from PC to Mac and am delighted with the Mac experience. However, my photos now seem to be scattered in different places. If I look in the Finder, some are in the "Pictures" folder and others in the "My Photos" folder.
When I first migrated I used iPhoto but have since bought Aperture for the added functionality and flexibility. So my iPhoto library has now been imported/duplicated into Aperture.
All in all It's a right old mess and, I suspect, entirely my fault! My first question: is there an ideal central location in which to store and organise photos on a Mac - and from which they can be backed-up to a Time Machine? My second question is; how do I go about deleting/removing all the duplicate photos?

I don't know how aperture stores the photos, but I assume it is similar to iPhoto in that it imports them into a centralized location.
Your "My Photos" folder is not a Mac item. It likely came along with your transfer from your PC. The Pictures folder would be the normal folder to place them into if you don't want to use Aperture's method.

HT1620 Where do you find security key for iOS on iPad. 4digit key for update..

Need to find security key. 4didgit To update iPad to7.1.1. I have no idea were it is , first time ever asked for a pass to update

The iOS upgrade is seeking whatever code you use to unlock your iPhone or iPad device; your device passcode or PIN or password you're using to secure your device.
This to avoid somebody random poking buttons and unexpectedly upgrading your temporarily-unlocked device.
If you've forgotten the PIN or password that you had originally configured to unlock your phone, there is a reset sequence.

Where do I store and download for IPhone Apps and Computer Apps?

I'm feeling like a dinosaur in not understanding how to download and store apps for my iphone and those that I may DEMO or buy for my computer.
For instance I have started syncing the iPhone to the MacBookPro so that this is easy when I am traveling. Now the MacBookPro is in the shop and I'd like to d/l an app for the iPhone. Can I do this on the MacPro which I am using now? If so, do I go directly to the Mac App Store do I open some App program on my MacPro? Do I have to d/l this app from my phone or MacBookPro only? I don't get this.
Also, I called in for Aperture support the other day and didn't have any info on this software that I bought. I guess I downloaded a demo from some Mac Computer App store and then paid for the App after running the Demo? Then this information is stored somewhere different from having downloaded the Software directly without a demo or from another site or from some app on my MacPro?
Something of a newbie here so any straightening out on how this works now and (perhaps) how it may work differently in IOS 5 or Lion would be really wonderful.
Thanks.

The iphone will sync with one computer at a time. If you sync to another, then the current contetn will be erased and reaplaqced with content from the new computer.
"If so, do I go directly to the Mac App Store do I open some App program on my MacPro? "
The Mac app store has NOTHING at all to do with iphone. it is for buyong apps for your computer ONLY, NOT iphone.
You can download apps from the itunes app store on your iphone or on your computer. Your choice.
iPhone User Guide (For iOS 5.0 Software)

Where best to store encryption key for dbms_crypto?

Similar Messages

Maybe you are looking for