Airport Extreme used as access point. External disk does not show up in Finder

The title pretty much sums it up. I'm using my Airport as just an access point. I connected an external disk to it. The disk shows up in the Airport Utility, however I cannot connect to it because my Airport has never shown up in Finder. I went to preferences and checked Connected Servers, still no go. Any advice?

A few things to check:
The drive must be formatted in Mac OS Extended (Journaled), or FAT32
Since the USB port on the AirPort Extreme is under powered, you almost always have to use a powered USB hub when connecting a hard drive, even if the hard drive has its own power supply
When locating the disk on your Mac, open Macintosh HD or the Finder and look for the AirPort Extreme icon under the SHARED heading on the left side of the window.
Click on the AirPort Extreme icon and a folder will appear to the right representing your drive
Double click the folder to mount the drive on the desktop

Similar Messages

External drive does not show up in finder/ disk utility not able to repair

Hello,
My external drive does not show up in finder. But it appaers in DISK UTILITY. When I tried to repair it, it said:
Verify and Repair volume “ANNE HD”
** /dev/disk1s1 (NO WRITE)
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
Unable to read directory (Input/output error)
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
How can I back up files if the external drive is not found in FINDER? I tried to restore with disk utility, but it doesn't seem to be able to select the hard drive.
Can you please help me?

Thanks a lot Niel,
Diskwarrior is a program for what you need to buy a DVD. I live in Brazil I have no idea where to buy it. Or can you download it?
A

External drive does not show up in Time Machine

I just applied the lastest update today and now my external drive does not show up in Time Machine. It does show up in Finder.

Gracias Sir Kappy, These instructions didn't include Yosemite, but I followed the closest and used Mavericks instructions and the command-R was the key, which I suppose means 'restore?' Nothing is explained as we should all be able to read the programmers minds by now...
Thanks for the help and problem resolved.

My samsung external HD does not show its folders on MAC. Does somebody can help me?

My Samsung external hd does not show its folders on MAC. It runs sometimes at Windows systems. I hadl already tried to configure to show hidden folders, but it does not solve my problem.

Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files?

Can Airport be used as Access Point?

I am wondering if Airport Extreme or Airport Express could be used as Access Point or Wireless Repeater where it could help me to enhance my home wireless signal.
Although i have network cables laid in different rooms, but i would still prefer to have the whole house wireless.
Could anyone advise me.
Thanks!

Can I have multiple Airport Extreme N devices set up as APs and have clients roam between them?
Note that because this is a concrete building, they can't see each other and be used as repeaters. I just want to have multiple wired APs and be able to connect to the nearest one.
I'm currently using Linksys WAP54GP devices, but traffic from my MacBook keeps stopping, and I have to turn the AirPort (N) in the MacBook off and back on.
[Not sure how to describe the problem above, email and web servers time out, but an SSH session to a local Linux box continues to work just fine.]
Anyway, I'm giving up on the Linksys, and would like to know if I can use the Airport Extreme(s) instead.
Thanks!

External hard disk does not show in finder

WD usb external hard disk does not appear in finder. Disk utility sees it and will mount/unmount and eject. I ran repair disk util. and all is well but still does not appear in finder

Hey Hatter, Thanx for the input.
Among other things I tried was a terminal routine someone suggested with no luck and new drivers/firmware for the drive, again, no luck.
I still don't know for sure what caused my problem, but I re-partitioned the drive and re-formatted it and that seemed to solve the provlem. Sadly, I lost all my info that was backed up on that particular drive but hopefully it won't come back to bite me later.
Cheers!!

External Hard Drive does not show up in Finder

My external hard drive is not showing up in Finder.
It shows up in Disc Utility, but I do not have access to it. I have tried the following:
command-shift c, nothing happens
confirmed in Preferences/General that external hard drive was checked
tried another cable
tried another port on the back of the external drive
tried to connect through the USB port
re-started, etc.

zone-5 wrote:
I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
Just above the list of topics, on the left, is a +Post New Topic+ option.

External harddrive does not show on desktop

Trying to back up data for genius bar appointment, but external harddrive is not showing on desktop.

Look in Finder > Preferences > general tab > check external disks.

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

1 TB External WD Drive Not Showing Up In Finder/Disk Utility/Terminal

Hey everyone,
First time posting here so forgive any mistakes. I recently purchased a Late 2013 Macbook Pro Retina, 15-inch, 2.6 GHz Intel Core i7 from Apple. Previously, I had the late 2007 Macbook Pro model until a friend spilled some water on it and corrupted the motherboard. Regardless, I was using a Western Digital 1 TB external hard-drive to keep all my documents and files backed up, manually, alongside the time machine feature built in. (This was not connected at the time of the spill, and was not thereafter, so rule out water damage) During the period between when the old one died, (earlier this year May-2013), I kept the drive safely in storage because I knew I would want to transfer my 100gb music librairy along with my photos and other files when I finally got the new one later that year (was waiting for the hardwell processors to come out for the MBP). Just recently after this purchase I tried to connect the drive to my new MacBook Pro but it was not showing up. I have scowered the online forums for trouble shooting tips and took all the steps to no avail. I have replaced the data-drive cable with a new one, connected it to the wall outlet in case it wasn't drawing enough power from the laptop, among a few other simple tricks, but still it would not show up in either Disk Utility or the terminal command to show all active drives, all that's there is the internal Macintosh HD one. It was a fairly quiet drive-however I do notice there is not much of a 'spin-up' noise or any sound of it begining to work when turned on or plugged in, so I'm worried there might be something wrong with the drive itself. Nonetheless, the power signal continues to flash but still no recognition from the computer that it's there, so I'm certain it's not reading it. I have tried on my other buddys Mac and it is the same situation, as well as my roommates PC (which I figured wouldnt anyway because of how its formatted, but it was worth a shot) I am not sure which avenue to take next as I have all my files and college work that I still need access to on the drive, and would really hate to have to format the drive or anything drastic as such. Possibly there is a part I can buy and replace myself to make it start up and spin again, but I am not sure what that part could be or if there is an easier solution out there.
I would greatly appreciate any information or help on this problem, thank you all for the time and advie.

Clicking from a hard drive is bad. Does the external drive have an external power supply? If it does I would use this supply.

I have an airport extreme space station which works fine, but does not ask for the password so anyone can get on my network. I don't know what to do to fix this.

I set up airport wifi with a WEP password, but it never asks for the password and anyone can enter my network...what to do?

Is it possible to backtrack your way out of the keychain?
Yes:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Delete every entry that has both your Network Name with this Kind.
What can I do to test or reset?
You can completely erase all the base station's passwords by performing either a "hard" or "factory default" reset. You can also temporarily disable these passwords for up to five minutes so that you will have enough time to change them using the AirPort Utility, by just performing a "soft" reset. I would recommend this one first.
This would also be a good time to consider using WPA or WPA2, instead of WEP, as WEP is no longer considered secure.
I got the airport extreme based used with no softward and set up with reset on airport base and followed instructions.
You can download a copy of the AirPort Utility, that runs on OS X Tiger here.

External HDD (Internal) Not Showing Up In Finder, But It Is Showing Up In Disk Utility

Before I start, I know that this question has technically been solved before, but not exactly in my case. Keep in mind that I'm a graphic designer, this is why I am so passionate about fixing this issue. So, here's the story. Yesterday, I sold my Mac mini (Late 2009). I had plans of buying the new MacBook Pro w/ Retina Display (15 inch), and that worked out perfectly. I bought the MacBook and sold my Mac mini. Prior to selling the Mac mini, I decided to format an old hard drive that I had, which was a 160GB hard drive. My plan was to sell the computer with the 160GB HDD, and keep my 750GB HDD. I know my fair share of computing and repair, so I replaced the hard drive myself, and reinstalled Mac OS X ML on the 160GB HDD. I installed the OS via external SATA to USB connection, and it booted up perfectly through that connection to my Mac mini. Then, when I took out the 160GB HDD, my computer booted to my priority internal drive, which was the 750 GB HDD, that I'm having problems with currently. It booted up perfectly, and all of my information was on it. So, at that point, seeing that everything was flawless, I extracted the 750GB HDD, from inside the computer and replaced it with the 160GB HDD, which I formatted, reinstalled ML on, and was planning on selling it with. The 160GB HDD booted perfectly and everything was working on the Mac mini, but then, I plugged in my 750GB HDD via USB connection, to see if my files and everything was still there, I got a message saying, "The disk you inserted is not readable by this computer" and it gave me three options underneath, which were: "Initialize...", "Ignore" and "Eject". I pressed on initialize, and tried to do everything that I possibly could, without formatting it, and all of the options like "Verify Disk" and "Repair Disk" were "grayed out", if you know what I mean. I tried plugging it into all 5 USB ports, but I got the same message. It was recognized in Disk Utility, but not in Finder. So, I sold the computer with the 160GB HDD that was working fine, but now I had another dilemma which was why my 750GB HDD, isn't showing up in Finder. I can hear the HDD spinning when I plug it in via USB. This Hard Drive has run Mac OS X Lion and Mountain Lion on it, I've never installed Windows on it. So, it was properly formatted for a Mac. Now, I went out and bought the MacBook Pro with Retina Display that I needed, and I tried doing the same thing, which was plugging it in via USB, and seeing if Finder would pick it up. Still, nothing. I ended up with the same message. Here are some reference screenshots, of what I'm getting exactly.
I've called Western Digital, and they told me to try booting up the 750GB HDD, in an older Macbook Pro, to see if it will boot, and recovery all of the files from there. The problem is, I don't know anybody with an older MBP. I called Best Buy and they said that they could take a look at it, but I would truly prefer by fixing this on my own, without having to pay them. That would be my LAST resort. I'm aware that I can't boot up the 750GB HDD in my new MBP w/ Retina because it can only carry SSD. So, I'm basically puzzled. If anybody could help me out, it'd be greatly appreciated. Like I said before, I'm a graphic designer, and I'm in desperate need of the files that were on my 750GB HDD. Thanks.

I describe how you fix it here
https://discussions.apple.com/message/21995208#21995208

10.2.8 installation and external hard disk does not show on desktop

I just reinstalled OS X 10.2 (by erasing the hard disk during installation) and upgraded with the Combo pack to 10.2.8 . This is an iMac G4 1GHz with a 17-inch display. I tried connecting a Western Digital MyBook with 500Gb through both the USB port and through FireWire. In both cases the hard drive does not appear on the desktop BUT does appear in the Disk Utility program and in the System Information window. Finder, therefore, doesn't display the drive. The MyBook drive is formatted to Windows FAT 32. Before I reinstalled OS X 10.2.8, this machine was running 10.3.9 and the drive did appear (I'm still searching for the 10.3 disk).
Is this an issue with OS X 10.2.8? Given the drive is detected by the System Information section and by the Disk Utility, is there a way of forcing Finder to display it (and allow access)?

Sometimes I have found that I have to turn of the ext. hd and then reconnect the firewire cables. there is a cylinder that is an inch away from one of the firewire plugs, which should be connected toward the tower and the other firewire plug toward the ext. hd. have patience, sometimes it will show up. also a restart maybe...

Used disk space not showing up in finder

A friend has asked me to look into his external hard drive issue.
He got it back from a store that backed up his start-up drive to this external the other day to discover that there isn't any visible files on the drive. It does state that there is 100 gigs being used on the drive, the exact size of his back up, but there isn't one file or folder on the drive.
I've used tinkertools to see if there was any hidden files with no luck and I've also repaired and verified the permission.
Does anyone know why this is happening? I don't want to simply re-format without a clue why the 100 gigs isn't showing.

Hi Eric,
Please refer the following HP article to expand your array , refer the TechNet article to expand your drive:
HP Proliant Servers - How to Expand an Array and Extend the Logical Drive
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03510253-1%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=4231377&ac.admitted=1411638027623.876444892.199480143
TechNet article:
Extend System/Boot Volume on Windows Server 2008/ Windows Vista/Win7 Beta
http://blogs.technet.com/b/mghazai/archive/2009/02/24/extend-system-boot-volume-on-windows-server-2008-windows-vista-win7-beta.aspx
Extend a simple or spanned volume
http://technet.microsoft.com/en-us/library/cc776741.aspx
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have a HP printer 8600 and airport extreme -- want to print from two computers - does not work

I just bought HP 8600 -- run Lion -- have airport extreme want to print wirelessly from both computers won't work

How are you trying to connect the printer - wirelessly or Ethernet or USB to the Airport?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Airport Extreme used as access point. External disk does not show up in Finder

Similar Messages

Maybe you are looking for