Airport Just Not Working

I was able to download the Airport Utility and set up my Airport on my Windows Laptop. The utility says everything is fine but the airport itself is flashing amber. The wireless internet is not working and I have tried resetting the Airport but no luck. Any ideas on how to resolve this issue?
Thanks

Have you tried to reset the base?
Just get a paper clip and find the area in the back to reset the base
just insert the paper clip until the amber light flashes twice as fast as before and hold it there for about 5 seconds. Also try reseting your modem as well.
This cleared up my problems yesterday .

Similar Messages

Airport express not working since today's itunes update

Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.

Ray Dio wrote:
Since updating iTunes today, Airport Express not working.
try this:
go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
now have iTunes connect to the remote speaker again.
JGG

TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated!

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother was signed into it but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.

Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.

Airport Express not working with Comcast

I used to have AT&T and had my airport working well. Yesterday i changed to Comcast and my airport is not working the light stays yellow.. I tried resetting it but it didn't work.. I use it with my old Cisco router and its working. Whats wrong with my Airport Express? My computers are Windows 7

A solid amber light indicates that the AirPort Express has locked up....or it is defective.
Suggest you that try a Factory Default Reset as follows:
Pull the Express from power
Let it rest for a few minutes
Hold in the reset button and keep holding it for another 8-10 seconds while you plug the Express back in to power
Release the reset button after the hold period and allow 40-45 seconds to restart
The Express should display a slow, blinking amber light at this time
If you continue to see a solid amber light after a few tries with a Factory Default Reset, the Express has failed and it will need to be replaced.

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

It would be helpful to know what version of Acrobat, WORD, and operating system.
Without that info, I would suggest at this point to open your WORD file and then go to the print menu and print to file using the Adobe PDF printer. Open the created file in Distiller and see if you get a PDF. If so, check to see if AcroTray is running in the background.
You say you tried many ways. It would help to know what you tried and what worked or did not work, and at what point the failure occurs.

After an update my airport is not working. It won't turn on. Do I need to redownload a driver, and how?

After an update my airport is not working. It won't turn on no matter how many times I press the turn on Wi Fi button. Do I need to redownload a driver, and how?

Hello
Try this
plug a WIERED mouse , start up your imac , hold on mouse buttons for 30-40 second at least by chance cd could be ejected
HTH
Pierre

I updated my iPhoto app on my mac pro and now it is not letting me to save pictures from google. I've restarted my mac and everything and it's just not working.

It's just not working and i am ******....

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. How you feel about this is of no help and less interest.

Airport just stopped working

Hi Everyone,
I hopw someone has some info that might help.
I have a MacBook and PC (yuck). Both just stopped working with my Airport Extreme, and when I tried plugging the ethernet cable directly into both, nothing happened. No data was transferring.
I called my cable company and they were able to get my PC working, directly connected, but not the MacBook.
When the ethernet cable is plugged directly into the MacBook, nothing happens...no lights showing it's connected to the computer. When I connect the ethernet cable to the Airport, everything lights up, showing a connection, but I can't get the data to transfer from Airport to MacBook (or PC for that matter).
Right now, I'm hijacking someone else's wireless signal in my condo...don't really know who. So, I know my Airport card is working properly.
The tech at Brighthouse cable saod something about earthlink customers having trouble recently because of something that earthlink downloaded to them, where IP addresses wouldn't renew. I never downloaded anything, is this possible?
I'm really stumped, and frustrated because I can't connect, and it's not feasible for me to hardwire in due to the location of my cable modem. Plus, that only works with the crappy PC, and I don't want to use that.
Please, someone help...I'm desperate...and at a loss for what the problem could be!
Thank you!!!!
EDIT: I just powered up my old iBook G4, and it won't connect to my base station either
EDIT X2: I should probably add what I have already tried...I have (several times) unplugged the cable modem and Airport base station. Used Airport set up to re-set it (again, several times).

Ok MCOJerry,
Here's the scoop.
My friend called and gave me the story much like you described. Almost identical in fact.
He had called TimeWarner, who didn't come to any resolution and then referred him to Earthlink, washing their hands in the process.
A over seas tech support then spend a couple of hours, then made a call back with another tech. who also spent significant time on the phone. This time the tech reconfigured OSX a couple of times. Set up alternate location profiles, changed the DNS settings etc.
They re-assigned the IP address and forced the cable modem to init. the MAC address list. They also disconnected the Airport Extreme (the square version) connected the mac directly to the modem and forced a manual set of IP settings.
They got the mac to work with this last configuration, but of course the rest of the machines were out of luck as was the network printer.
All in all he spent six hours on the phone.
When I got 'the call' I had him give me some preliminary network stats and then had him reconnect the Airport Extreme. This yielded a dead internet connection.
So as I wrote earlier, I went over there armed with a boat load of tools & cables.
I reconfigured the mac to a normal & stable automatic type configuration. I also reset the the Airport buy pressing the reset button for 5sec. Then set up a new configuration. I made sure that the latest update was applied to the Airport extreme.
Then I logged on to the cable modem. Don't mis-understand, I did not log on to the internet through the modem. I logged on to the modem's internal web server. checked some logs and ran a couple of tests.
Then I found the problem. The real problem: The signal power level from the point of demarcation (at the pole) was so low as to be useless. Eliminating the Airport Extreme, simply removed a level of complication in the system. It also may have removed some spurious RF that may have been introduced into the network. It did not result in a resolution to the real problem.
The cable line needs to be physically repaired. Either a wet connection or a frayed shield or the line needs a booster. But the problem, which looked like a Airport extreme issue is in fact a bad cable line.
I do have him up and running on the Airport Extreme at this moment by eliminating all extraneous length from his cable line within the house. The cable modem is now located in the basement where the cable enters the house. I have an single ethernet cable running from there to the Airport Extreme. I pulled all the other electrical items from this particular power line branch (This specific circuit.) This is all temporary until the cable guy/gal arrives to fix the problem.
I hope this may help you in your trouble resolution.
-Alan
Specs:
Motorola SB 5100 Cable Modem.
minus (-)5db signal power level
Software Version: SB5100-2.3.2.5-SCM01-NOSH
Hardware Version: 3
MIB Version: II
GUI Version: 1.0
VxWorks Version: 5.4
OSX 10.4.9
Airport Utility 5.1 (510.18)
Airport Extreme Base Station (square model) V7.1
Open DNS
208.67.222.222
208.67.220.220
AlBook, TiBook, iMac, iBook Mac OS X (10.4.9) Corporate / mixed environment / multiple networks.

AirPort card not working ... mostly

This is one that has me a bit stumped. I have a G3 iBook with the original airport card installed. Yesterday, it stopped recognizing any wireless networks in the local area (I have one graphite ABS and one AirPort Express, plus there are one or two other wireless network around here I can normally at least see). My other portable (PowerBook G4 12") sees all these networks fine. I re-seated the card in the iBook, to no avail. I assumed it had conked out and started researching replacement cards (quite spendy, as you probably know).
Just today, my iBook started recognizing wireless nets again ... briefly. For about five or ten minutes, I saw a few networks and actually was able to access the WAN. After then, though, it's back to not working at all. Has this happened to anyone? Was it the last, final gasp of my venerable airport card? Or if this has happened to you, did you find that it was another problem entirely?
Thanks for any help.
iBook G3 Mac OS X (10.4.4)

Appelfan,
I had gotten frustrated with the random behavior and posted a question about the possibility of an USB dongle wireless solution for the Mac. Duane answered me and gave me a very helpful suggestion - that I consider Ethernet Wireless Adapters, and even mentioned a couple of brands - just in case you may consider that route. I have copied his responses to me, below:
Thank you,
Gino
Duane
Re: Is there a USB Wireless Dongle or card for a Mac?
Posted: Mar 24, 2006 5:33 PM in response to: Gino La Pointe
An alternative to USB wireless adapters is Ethernet wireless adapters. Those require no drivers and therefore will work with any Ethernet device regardless of OS.
Duane
Re: Is there a USB Wireless Dongle or card for a Mac?
Posted: Mar 25, 2006 11:14 AM in response to: Gino La Pointe
Examples of Ethernet wireless adapters are the Linksys WET11 and Linksys WET54G. There are many more.

Airport Express Not Working with iMac G4 and HP laptop

Ok I am really frustrated with this. I had my Airport Express configured to my mac and my old roommate's mac fine. I moved and just tried setting it up with my mac and my new roommate's PC laptop. It did not work. I tried connecting a router to see if that would help. It still didn't work. I reset the airport's default settings and it still didn't work. Is there a connectivity issue between macs and pcs using the airport express that I don't know about? Am I missing something? Can anyone give me some suggestions of what to try next because I am seriously fed up and running out of ideas of how to alleviate this.
Could it have anything to do with a firewall on the pc or the fact that I'm going from a place that supplied me cable internet to a place that now has dsl?
Thanks for any help.
Aaron

Macs and PCs work together just fine with an Airport Express.
Unfortunately, you have given us little information to help you with beyond simply indicating that "it doesn't work". Please elaborate:
1. do the Mac and PC "see" the Airport Express wireless network?
2. if so, does the Airport Utility (or Airport Admin Utility) on either computer "see" the Airport Express and allow you to view/change its configuration?
3. what does the status light on the Airport Express show?
4. if you can connect to the Airport Express wireless network from the PC and/or Mac, is the only problem that you cannot access the internet?
5. what kind of reset did you do? To really start from scratch, do a factory default reset as described here.

Airport Express not working with wireless router

I just bought Airport Express to play music on my stereo. My PC running XP is connected to my wireless router (TeleWell TW-EA510v3) with ethernet cable and airport express wirelessly. Problem is that Airport Utility (and iTunes) can't find AE if it's not connected to router with ethernet cable.
I can connect to AE from Aiport Utility by "configure other" option so it's connected to my wireless network correctly.
Is this kind of set up even possible (pc wired to router and AE wireless)? I have tried tried WEP, WPA/WPA2 and no encryption on my wireless network and AE connects ok every time but Airport Utility still can't find it. I even tried to make a WDS network but AE was not compatible with my router. Now I can't come up with anything else to try.
Is there anything else to do? Should I buy WLAN adabter to my PC and would AE work then?
Why can't Apple make Airport Utility to recognise AE with given IP like with "configure other" option? Should not be too hard to program?!
Message was edited by: -MTL-

Follow the isntruction lisetd below...they work.
Actually, the ae is a slick device, once you get it to work.
Make sure that one (or both) checkboxes in Airport Utility > Airport Express tab
(middle of page) are not checked...if one or both are checked, they limit (hide) wireless connectivity options (e.g., WEP-64) to choose from.
P.S. You must have patience: it may take a couple of minutes to establish the connection and turn the led to solid green. So, give it a chance.
===============================================================================
OMG!!! You are da man!!!
I have this streaming perfectly now!! Here is what I did for others to see and use (it does work perfectly)
Step 1) Clear/Reset the Airport Express
Step 2) Connect the Airport Express directly to the Router/Modem via Ethernet to set up Wireless
Step 3) Do it via the Manual Set-up Effort Listed Below following:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Linksys wireless network>
o Wireless Security: <select the encryption type of the existing wireless network> I have 64bit WEP
(Same as 40bit on the drop down menu)
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
Once it congratulates you, unplug the ethernet cable
Verify in Aitport Utility that it still recognizes (if not, repeat the above). Note this may take a few minutes, so be patient.
Now place the airport express with your stereo (or whatever) and again be patient as it tries to find the network
(mine took 4 minutes) then it turns green and you are off listening to music on your stereo downstairs in another room.
Frustrating when it does not work at first, but keep trying and it will work!!
Thanks everyone for your help!!
===============================================================================

Airport Express not working with University Network

So I recently purchased an Airport Express to use as a router/to stream music because my University's (University of Arizona) network is a WPA-2 Enterprise network doesn't allow that. I have an ethernet port in my dorm room and its all hooked up but when I connect to my created network there is no internet connection. I already registered the MAC address with the network so now I'm not sure why its not working.

I have just bought the new Airport Express as well and when I plug it into my router at home it does not pick up the Internet. My old AE has no problems at all and all other connections work.
I can see the new AE in my Airport Utility but cannot connect to it. Really frustrating and far from plug and play.

Airporter does not work after snow leopard upgrade

I upgraded my old macbook to snow leopard, and the Time Capsule can not detect the disk drive on the Airporter. The laptop has no problem using airporter to get to the internet, and the airport utility can see the disk drive. After the install of snow leopard, I saw the time capsule, and it asked if I wanted the file recovered from the time capsule. This seemed to work perfectly, and made the upgrade painless except my time capsule does not work anymore.

I have the metadata.mds.plist but I do not have the Spotlight.plist as well. Regarding a fix, I had a similar issue with Spotlight's index when I upgraded one of my iMacs. A clean install, properly resolved the issue. I'd be curious if a reinstall of Snow Leopard would take care of the issue, as the A&I feature isn't there anymore I've yet to determine what exactly the install of SL over SL would do. My understanding is that the A&I is performed, it's just not called as such.

Help - Airport network not working - confused!!

Hello, I wonder if anyone out there can help. I have got a problem with my airport network that doesn't make any sense and I havent seen another post with the same problems.
I have an imac G5 with 10.3.9. I have a wireless network set up, with an airport wireless card and two ax boxes (the second was bought later to boost the signal when we moved the Mac to another room). Initially it set up fine and worked for about 8-9 months. Then I noticed the second ax started behaving strangely. It would occasionally turn from 'green' to flashing amber for no reason - often after it had been on for a while. Turning it off and on did not change anything. Usually though it would work again the next day after being off all night. This continued to happen randomly until a couple of months later it switched to flashing amber continually.
I thought it had 'lost' the network so I tried using the airport set up assistant to reconnect it. However the set up assistant does not recognise ax number 2 any more, so I am not able to reconnect it. At the moment I am running off a faint signal from ax number 1.
I also tried setting up a completely new network from scratch. Again the new network is fine from the base ax bx but ax number 2 is still not recognised by my mac.
I also have a wireless printer connected to the network which does not work any more. This is where things became more confusing. The printer needs a boost signal to operate so when my booster ax went wrong the printer would not work. So I moved the printer and mac nearer ax number 1 to ensure it would pick up the network. However it still didn't work. So I attempted to set up the printer as wireless again, thinking it had become 'disconnected' somehow. However during installation you have to select the network to connect to. The computer would not pick up the apple network at all from ax number 1, yet it easily recognises our neighbours network from the flat above us. Strangely when I tried turning on the faulty ax box, the printer set up program picked up the faulty ax and not the original ax. But obviously I can't use the printer from the faulty ax box because it doesnt connect to the rest of the network.
So now I am confused. I am not sure what has gone wrong and what I need to replace. Originally I thought it was the second ax box that had gone wrong. But as the printer software can identify the second ax box I am not sure that this is the problem. Could there be something wrong with the airport card? I have checked that the card is properly connected and there is nothing visibly wrong there.
If anyone can help - please reply as I am going crazy here with things not working and don't know what to do next.
Thanks, Wrenster

Hello Wrenster,
I understand why you are confused, I was too while reading your post. However I have the solution for you. I believe you are a victim of environmental interference. Someone in your neighborhood just moved in with a another network, someone had a baby and is using a baby monitor, or maybe a local ham radio operator just got his license. Who knows!
This is what you need to do. Get all the devices in the same room and preform a hard restart on each one them per http://docs.info.apple.com/article.html?artnum=108044. Remember to preform a hard restart! After performing a hard restart on all three devices check the wireless networks available. You should have 3 ( one main and 2 airport expresses) ( or two depending on how many airports you own, I am not sure from your post). If you don't have the correct amount you may a bum base station and it may need to be replaced. But if you have the correct number of wireless networks ( Apple network XXXXXXX), use the airport admin utility ( inside of the utility folder ) to locate the main base station and configure it.
You will know when you are on the configuration page when you can read Name, Contact and Location.
First change the name to the location of the main base station, ie; it is the den so name should read DEN. leave the contact and location alone. On the bottom half of the page is where you create your network, so under network name change it to your desired network name ie; when others come over to my house I have them select COWSWEAT from the network list.
Second click on the change wireless security and set the security to WEP 128 BIT and make your password. Once you have configured a successful password be sure to click on the lock on the main configuration page ( the one with password under it) to get the HEX password for your PC friends.
Third ( we are almost done ) Select the WDS tab at the top and enable this base station as a main station. Select allow other wireless client on this base station as well. Now on that empty list box below click the plus sign to the right to add other base stations to this WDS network. From here you should be able to select the other 2 base station that we have not configure yet ( but preformed a hard restart on). After you have added them ( be sure the check box for auto configure is selected) they should read in the list that was empty on the WDS page.
Now update this should start the update process and may take 5-10 mins, it should provide a summery pop-up when with each station is done.
( Also you may get a message that there is update for the base station, please preform the updates for the selected base stations)
Now when it is completed check to see how many networks you have available ( it should only be one ). Select the network and confirm that all of your base stations appear under the select a base station in Airport admin utility, then move them back to their homes around the house. Giving them 45 secs to restart they should turn green if not , they could out of range of each other or the environmental interference could be affecting them. So you my need to rearrange them until they all green.
Good Luck,
Cowsweat

Airport Just Not Working

Similar Messages

Maybe you are looking for