Airport Print Server Stops Working Since OS 10.5 Mac added to OS 10.4's

I recently bought an iMac with Leopard. Since I purchased the Mac, my Canon IP5000 which is connected to an Airport Express (wireless printing) seems to drop off the network. Often, on my OS10.4.3 Mac (G4 Powerbook), I'll have to uninstall the IP5000, unplug and then re-start the Airport, and then re-install the printer for it to start working again. It will work with no trouble until I turn on the new iMac... sometime thereafter, I'll loose connectivity to the IP 5000 again.
I can't seem to figure out whether there is 100% correlation to my iMac starting on the network... trying to experiment a bit. But I figured while I'm trying to nail the source of the problem, I'd fire a question off to the Forum since even if I confirm that the iMac with Leopard seems to be causing the IP 5000 to loose connectivity, I still need to solve the issue.
Any suggestions will be enormously helpful.
- David

*"Is there a compatibility issue between the different OS?"*
Since you're trying to connect to a wireless network, the OS each computer is running has no bearing on this issue whatsoever.

Similar Messages

  • Printer, CP4025, stopped working with Windows 10 upgrade

    When I did my  Windows 10 upgrade my Printer, CP4025, stopped working. I tried deleteing and added, wouldn't work.So i went back to Windows 7 because I have to be able to print today. But it still will not work. Now it will not add, getting a message saying "the folder you specified doesn't contain driver software for your device". Yes, I am using the disk to try and do this. HELP!!!! I am an old lady and if you go too techincal I will just be further confused.

    You may need the AMD chipset driver for that one. Select the first one listed.http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx 

  • Printing from within iTunes has stopped working since my last iTunes update.

    Printing from within iTunes has stopped working since my last iTunes update. Using Toshiba Satellite Pro Windows 7 and HP printer.

    That's too bad.
    If/when help is truly desired, try providing some specifics of what is occurring, such as any errors that may occur when attempting to print and what specifically is attempting to be printed.

  • HP printer has stopped working - Laserjet p1006

    I just installed Windows® 8 Consumer Preview and my HP printer has stopped working. I am using the Laserjet p1006 and I have tried everything, reinstalling the printer, re-downloading drivers etc. but to no avail. Are there new drivers available that work with Windows 8?
    Update:
    The printer is installed and driver has been picked up by Windows but every time I try and print something, it gives me an error that the document could not be printed.
    Any suggestions

    Really Thanks God
    i Found solution of this problem Randomly only by praying
    The solution
    Connect The p1005 printer to a pc have windows 7 and print a page with it and get the cable connected to windows 8 after that and go to control panel > hardware and sounds > Device and printer > hp laser jet p1005 Right click > Printer properties > ports > uncheck bidirectional support then press ok and print ,, it works
    Note : after doing the pervious steps if u turned the printer off u will need to connect it to windows 7 pc again and print and connect it to windows 8 it will work without the pervious steps //
    it seems like if windows 7 gives it information that is reseted after turn it off
    we wish windows 8 to solve this problem nearly
    That is the Original post page : http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/laserjet-p1005-will-not-print/34...

  • Printer MX320 stopped working and shows: close feeder cover

    Printer MX320 stopped working and shows: close feeder cover

    Hello,
    Please try pressing the OK or STOP button to clear the error.
    If the error remains, it may be due to the application you are scanning from not supporting scanning from the ADF.  However, if the issue persists, it would be best to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. Can u please help???

    FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • HT204266 hello i would like to know why my gnome village app as stop working since ihave done a up date to ios6 on my ipod touch

    hello I would like to know why my gnome village app as stop working since I have done a software up date to a ico6 on my ipod touch

    iOS: Troubleshooting applications purchased from the App Store
    Have youwent to the developer's site?

  • After down loading the latest up dates, I am now getting a pop up that says can't get e mail server stopped working, how can I stop this pop u.

    After the latest ISO 8.3 down  load to my, I now keep getting a pop up saying can't gette mail server stopped working, I am still receiving e mail so I know it working, it's just annoying having to cancel this pop up, any ideas how to stop this pop up.

    Pull your mail plist from ~/Library/Preferences

  • My Iphone4 alarm stopped working since last two days. Is it the same issue which cropped up on Jan 1 2011? What is the way out?

    my iphone4 alarm stopped working since last two days (31.12.2011). is it the same issue that cropped up last year on 1.1. 2011? what is the way out? and who should i turn to for support?

    This issue was fixed in iOS5 - what is yours running?

  • My Airport Extreme just stopped working.  The message says ethernet cable not plugged in, but it is.  Cable modem works fine.  Is this a common problem?

    My 2-year-old Airport Extreme instantly stopped working last night and is flashing the status light.  The problem description is that the ethernet cable is not plugged in... however, the ethernet cable is still plugged into the cable modem.  I checked the modem by plugging directly into my laptop... it works fine.  Is this a common problem?  Is there anything I can try other than sending it in for warranty repair?

    At this point, before sending it back, I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    Thanks for that.  I did as suggested but when I tried again, it still did not work.  Another  com.apple.Grab.plist appeared in the Library.
    I now have the following files in Library
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
    file://localhost/Users/peterpatel/Library/Preferences/
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
    What do you suggest I do now?

  • My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

  • Airport Express has stopped working, no IP-adress

    Airport Express has stopped working. In my Airport tool, I can't see the Airport Express anymore.
    Under network, I can still see the Airport, but it says, that it cant find an IP-Adress.
    It can see my Airport Extreme.
    Thanks in advance.
    Best
    Clintcool1968

    Try resetting the Airport Express.
    If you don't see it in Airport Utility in your Utilities folder, then you would need to reset it...
    Do you have it set to "Join" the Extreme network? or something else?
    See this Apple doc on how to reset your base station.
    http://support.apple.com/kb/HT3728
    Also, you would not see it in your Network preference panel in the System Preferences.
    You will only see the main network which is your Airport Extreme....
    Unless you have 2 separate networks....
    How many do you have?

  • My time capsule has stopped working since installing Yosemite. It says to wait to tell me how much longer but it stays that way for hours.

    My time machine has stopped working since I upgraded to Yosemite. It gets to the point that says it will estimate the time remaining, but it never gives me that answer and it just stays on that page and never completes it's backup. This is a brand new macpro, so I wanted to capture the previous info on my computer I was able to put my external hard drive on new computer and it did the migration and all my old info returned. However, two days later I wanted to do a backup using Time Machine with my Western Digital Mac external hard drive but it won't progress past saying how much time remaining, even after several hours of sitting there.

    You do need to wait a long time.. as it takes a long while for Yosemite to index the existing backup if it is large.
    Here is Apple's List of bad things that happen to TM in Yosemite.
    OS X Yosemite: Time Machine problems
    It is clearly no where near as comprehensive as it needs to be.
    I presume your disk has your old backup.. it may be better to keep the old backup.. save that for the future.. and get a new disk and start a fresh clean backup.
    I would also recommend using Carbon Copy Cloner or similar for the time being. Make a bootable clone backup of your drive to a new external drive.. it is really superior in lots of ways to Time Machine. And does show you what it is doing.
    For TM at least you can still use the widget so you have some log access to that TM does.
    A1 here. http://pondini.org/TM/Troubleshooting.html

  • Face time has stopped working since update on iPad and iPhone

    My face time has stopped working since both my iPad 2 and iPhone 4S did their iOS 6.1 update. They just say that a connection cannot be made, or FaceTime unavailable. Both devices are sitting beside each other, both have excellent wifi. If you try to FaceTime one of the devices, it will ring once and then lose the connection. Apple account details are all fine, FaceTime is switched on, on both. Kind of lost and frustrated now

    Hey guys,
    So I also noticed a few weeks ago facetime stopped working on my iphone but was still working on my ipad2 and macbook pro.
    Phone - iphone 4
    os version - 6.1.3
    carrier - at&t 14.2
    location - usa
    I use the same apple id for all devices
    I searched online for a fix and/or troubleshooting help. I tried alot of the suggestions on this discussion as well as others but nothing seemed to work. Out of frustration, I finally reached out to apple tech support. I went through the entire trouble shooting steps with an apple technician and was even transferred to a senior advisor for additional help. We tried everything from resetting passwords, resetting icloud accounts, resetting phone settings, checking network settings, resetting date & time, resetting location, making sure push and multitasking functionalities were working properly, etc. We spent a couple hours troubleshooting trying everything but nothing worked. The apple tech said I would have to restore the os and if that didn't work, the only other thing to do would be to send in my phone. But he did stress that I had to restore as a NEW device.
    I backed up my phone using iclould and my computer (everything is synced) and restored as a new device. I tested facetime and it worked, however my phone was back to factory position which is not ideal. So I went to itunes and restored my most resent backup. I got all my phone contents back but FaceTime no longer worked. I called the apple senior advisor back and he said I would not be able to restore from a backup because there seemed to be an issue with it that prevented FaceTime from working properly. So I backed up what I could to itunes and iCloud then restored my phone as new. After the restore, it prompted me to install the carrier software update which I did. Then I used itunes to sync my music, apps, contacts, mail, videos, pics, etc. I did this yesterday and facetime has been working properly since then. However certain things I was not able to recover.
    So far, these are the things I noticed have been lost with the restore:
    - all my settings (everything went back to default/factory)
    - voicemail messages greater than 30 days old
    - all text and iMessages (but I still have copies of imessage conversations on my iPad and mac)
    - data stored within apps (you start fresh like when you first downloaded the app. some apps i have online accounts that sync but most apps the data is lost)
    - screen display configurations
    - notes that were only on phone and not synced with an email account
    Out of all my research, this has been the only thing to get facetime working again. But on the downside, it does take a lot of time to backup, restore, re-sync, and then set up my phone similarly to how I previously had things. The big thing for me was the loss of my apps data. I wish there was a way to restore that. But when all is said and done, I'm glad to have FaceTime back on my phone.
    If you are not quite ready to restore, check out this discussion for other suggestions you can try first:
    https://discussions.apple.com/thread/5163024?start=0&tstart=0
    I hope you guys find this useful.

Maybe you are looking for

  • Import process customization

    Hi Sap Experts, Right now i am working in a project where mostly material is import.Can any body tell me,How import process is differnt from local purchase.what access sequence,condition types,control data.and taxes are define in customization menu.H

  • Bad iBook G4 WiFi reception after hard-drive swap

    I just replaced the hard drive in my iBook G4 with a larger one. Everything works fine except that the WiFi only works in close proximity to our Airport Extreme Router. Our other 2 current Macs and our 2 iPhones continue to have good WiFi connections

  • Include new field in dynamic selection in fbl1n

    Hi Guys, I want to add a new field in dynamic selection in tcode FBL1N. Regards, H.Sathiskumar

  • Yosemite screen res settings

    Hi again, I have a HP widescreen, that requires a resolution of 1680 1050, but yosemite does not have this screen res setting... Is there any way I can fix this, I am using programs like Blender and Unity, so I don't wan't the screen to be stretched.

  • Socket does not have a constructor in PPro CC

    Hi there, I"m trying to run a very simple script using Socket in PPro CC         var conn = new Socket;         if(conn.open("192.168.1.23")) {             conn.write("GET /index.html HTTP/1.0\n\n");             reply = conn.read(999999);