Printer, CP4025, stopped working with Windows 10 upgrade

When I did my Windows 10 upgrade my Printer, CP4025, stopped working. I tried deleteing and added, wouldn't work.So i went back to Windows 7 because I have to be able to print today. But it still will not work. Now it will not add, getting a message saying "the folder you specified doesn't contain driver software for your device". Yes, I am using the disk to try and do this. HELP!!!! I am an old lady and if you go too techincal I will just be further confused.

You may need the AMD chipset driver for that one. Select the first one listed.http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx

Similar Messages

HP 6600 ALL IN ONE PRINTER SCANNER STOPPED WORKING WITH WINDOWS 10 UPGRADE

Upgraded my 2 year old lap top to windows 10 and the HP scanner is unresponsive, printer works fine, reloaded installation CD, nothing, went to HP online and it sends you every where but any fix to this issue

Hello Stringfield, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then recommend downloading and running the HP Print and Scan Doctor.
Please let me know the results. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My Canon Pixma iP8500 printer has stopped working with Mavericks

Hi, my Canon Pixma iP8500 printer has stopped working in the past few days and I made no alterations that could explain why this might happen. I am using OS X 10.9.5 Mavericks on a Mac Pro desktop computer. I can print a test page when selecting it on my Canon Printer Utility from my desktop so it seems that there is contact between the computer and the printer but it will not print from iPhoto, Preview or Mail. When I select Print from any of these nothing happens and there is nothing on the Print List. I have checked the Printers & Scanners in my System Preferences and my Canon iP8500 is listed and highlighted as Idle Default and Share this printer is ticked. I have tried deleting this printer then adding it but it still will not print. I would appreciate any helpful suggestions bearing in mind that I am fairly elderly and have a limited knowledge of IT and some of the terminology.
Thank you,
Colin.

Hi, might try this...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

T510 Mouse and Keyboard stops working with Windows Update - unable to roll back, happened twice

My mouse has been working fine for a while but it stopped working followed by the keyboard, I put it down to a Windows update but because Windows 7 keeps bluescreening on a restore point I couldn't recover. I contacted Lenovo got the rebuild disc for my machine, completely rebuilt it, all working fine, then after 2 days same issue, mouse stopped, keyboard stopped, restore points make no difference. Does anyone know what windows update is causing this and if there is a fix aside from rebuilding, I can't keep doing this and I need to understand the cause really, not had it with a laptop before. Gone back to using my old laptop until I can get it sorted. Does anyone have any ideas?

I installed the latest drivers via windows update and got the touchpad back, rebooted, it went again. Netiher the trackpoint or touchpad work. I then thought rather than focus on drivers check the bios. I disabled the trackpoint in the bios, still neither works, however if I disable the touchpad in the bios and enable the trackpoint, the trackpoint does consistently work. I can't explain why the touchpad worked after a touchpad update but now fails, the ultranav driver is installed but if both are enabled in the bios it say it isn't installed, if the trackpoint is enabled it tells me I need to enable both so it clearly knows it's there. What's curious is that this doesn't happen on the complete clean IBM build. I can't not turn off windows updates, I'm a developer so Ioad the laptops up with a vast variety of software and I need many of the windows update fixes, either way I am surprised they are conflicting with the touchpad so dramatically. I can't see it being a virus I'm using two layers of protection and if I blow the machine away and installed the updates via an .iso image (so it's never connected to anything else), I can replicate the problem. It's feasible it's another piece of software causing the conflict. Any one have any idea what could be going on or seen it before?

Web cam stopped working with Windows 7 (but works fine with Ubuntu Live CD).

Since two days my web cam stopped working. I am using Windows 7 64 bit and I have a Toshiba L505d S5992. It does not show in Device Manager and Windows Update doesn't recognize it, manually I can not install it, so my best guess it was broken.
But then I tried the LiveDVD of Ubuntu 10.10 (64 bit) and it recognized immediately my web cam and the blue light came on. I have no clue what happened with Windows 7 but it's getting very frustrating.
Any help would be very welcome at this point.

Download the webcam application for your unit from this website.
Uninstall it on the programs and features then installed the downloaded webcam application.
Hope this will help you solve the issue.

Has Photoshop stopped working with Windows 7?

I just signed up for Adobe's monthly plan. But when I tried to download Photoshop, I got a message that I was using an operating system that Photoshop no longer works with. I'm using Windows 7. What's going on?

No problem with Windows 7. Restart your computer, and run the Desktop Application manager as Administrator, and try again.

Vugen stopped working with Windows socket protocol

Hi Everyone...
I am trying to record windows client apllication with Windows socket protocol(Single). Its throughing following messange and crassed Vugen with the following message.
If anyone know about how to proceed further can please let me know.
Thanks,
Sri

Hi,
Parallels is not an application I have so I can not test this further.
I would think the answer may lie in the BootCamp forum where people may have tried the same thing as you or at any Parallels Forum you can find.
(Start here as there are links to the unintegrated ones).
7:32 PM Saturday; March 28, 2009

My Printer won't work with windows vista

I just got a new computer that runs windows vista and I can not get my printer to work it is a photosmart 1115. How can I get this to work it is my favorite printer

If this is the Photosmart 1115 that uses the #45 and #78 cartrdiges then use the "Add Printer" command in the Printers folder to add the Deskjet 970 printer. The Deskjet 970 driver is compatible with the Photosmart 1115 for printing although the functionality of reading the card slots back to the computer will not be available.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer does not work with Windows 7

I need help for printing with my HP Deskjet IA 3545 eAiO printer.
I cannot print with my laptop running on Windows 7. I have tried uninstalling and re-installing countless times over the past 3 days using the accompanying CD as well as trying to get the latest driver updates from the internet but all failed to print. I have also tried using Wireless Direct but that did not work as well. The printer printed the internal page when I ran the HP Printing and Scanning Doctor tool.
I have no such printing issue with thsi printer model while using my desktop and other laptop running on Windows 8.1. This Windows 7 laptop prints smoothly however when I switch to my Brother DCP-J315W and Canon LBP7100Cn printers.
Windows Updates lets me know there is one important update for the driver for this printer but for some mysterious reason the Windows 7 laptop just will not accept the down-loading and installation operations for this particular update.
Please assist me.

Hi there @YuLen ,
Welcome to the HP Forums
I read your post about how your Deskjet Ink Advantage 3545 is not completely functioning on your own computer running Windows 7 however, another computer functions fine with the printer, and the printer will also print out test pages successfully. This seems to sound like an operating system issue so far, and I have some ideas in mind for you to try out that might help.
1. Run the Microsoft Fix It Tool to uninstall the printer.
2. Restart your computer.
3. Perform a Clean Boot.
4. Restart the PC again.
5. Run Windows Updates: Use your Start menu to check for updates
6. Download and run the full installation here: HP Deskjet Ink Advantage 3540 e-All-in-One Printer series Full Feature Software and Drivers
7. Try printing now!
If there is still an issue with performing the Windows Updates, contact Microsoft: Microsoft Support Forums
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer Sharing stopped working with 10.5.4

I was able to print remotely via Sharing to my Epson x8400 printer connected to my G5, no Isight iMAC, until I ran the latest update to 10.5.4. Epson sad the following:
Subject
Problem. Mac OS 10.5.4 Printer is not accessable for remote printing. when ac...
Discussion Thread
Response (Oladele M) 07/18/2008 03:22 PM
This issue seems to be with the Mac update, since this problem did not occur until after you updated. Please contact Apple.
For optimal performance Epson tests and supports a direct connection from the printer to the Host PC/MAC. Although other methods are offered by third-party vendors Epson does not support or recommend this. Epson cannot guarantee consistent data transfer through any intermediate third-party devices. Because of the amount of information sent to the printer during a print job, it is necessary to have uninterrupted and consistent data flow. If you are experiencing communication errors while connected through any such device, you may want to contact the manufacturer.
Customer (Patrick Allen) 07/15/2008 06:42 PM
Problem. Mac OS 10.5.4 Printer is not accessable for remote printing. when accessed from a remote computer two printers are presented in the printer shared window one is not acessable to print and the when the other one is selected it reports an error. I have loaded and run your 10.5.3 update I have confermed this problem on one other system, also a powerPC MAc running 10.5.4.
Best regards,
Pat Allen
[email protected]

I'm having the same problem.
My Epson CX-4200 printer won't print via printer sharing over my wi-fi anymore.
I have the printer hooked directly to my intel iMac running 10.5.4.
When I try and print from my Macbook via the default printer; the app I'm in at the time will crash before the print dialogue box opens up.
My Macbook is also running 10.5.4. I have a US Robotic Max-G router.
Network works great. File sharing still works.
I've made no changes to my setup. I was able to get a couple docs to print yesterday after deleting an adding the printer back to each system. It printed very slowly but did work.
This morning. Same problem; wont' print again. I tried repeating what I did yesterday. Still won't work.
Whenever I try and print from my Macbook; the app I'm printing from will crash. Very annoying.
This used to work without any problem before.

Crystal Reports has stopped working with Windows 7 and demo database

I'm trying to get back up to speed on Crystal Reports after 10 years away. I'm running Crystal Reports 2008 Standard with the just-released Service Pack 3 (same symptom with SP2).
So I downloaded the demo database and tried creating a new report. No problems creating a simple customer list. When I add the Orders table and link the CustomerID columns and then add the OrderDate column to the report, everything works fine. But as soon as I add the OrderID or OrderDate column, the application crashes.
Culprit seems to be MSVCR80.dll. Here's the log:
Faulting application name: crw32.exe, version: 12.3.0.601, time stamp: 0x4bd05d31
Faulting module name: MSVCR80.dll, version: 8.0.50727.4927, time stamp: 0x4a2752ff
Exception code: 0xc000000d
Fault offset: 0x00008aa0
Faulting process id: 0x1944
Faulting application start time: 0x01cb0139cfafeb40
Faulting application path: C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\MSVCR80.dll
Report Id: 3b28c990-6d2d-11df-b9d8-00080d72c9f2
Suggestions? Thanks in advance.

Hello,
It may be that something was "fixed" and our default xml file falls out of the Standards now.
Are you wanting to connect to SQL or XML?
Go to Microsoft's site and search for C++ distribution and download and install the recommended one for windows 7. It may be that part is corrupt or our installer thinks it is there. Try doing a Repair install and custom options to select all of the DB drivers and exports types to see if that resolves the issue.
Thank you
Don

ISight stopped working with windows messenger (bootcamp/parallels)

A few days ago I installed windows xp pro via bootcamp. After installing the drivers and everything, windows messenger was great with the iSight and everything. Just today I installed parallels, and after opening windows i no longer have a "webcam" installed, and i noticed that even my "speaker" and "Microphone" settings have gone back to "Intel(r) Integrated Audio"
Any ideas how i could get this working again? The audio actually works, but I just need windows to find my iSight again...

Hi,
Parallels is not an application I have so I can not test this further.
I would think the answer may lie in the BootCamp forum where people may have tried the same thing as you or at any Parallels Forum you can find.
(Start here as there are links to the unintegrated ones).
7:32 PM Saturday; March 28, 2009

My Epson Printer has stopped working with my Mac Air

I have asked Epson for support but they keep telling me the obvious about deleting the printer via settings and reinstalling again. There have been several updates from Epson at the same time so there is obviously a problem but this is getting ridiculous now. Has anyone had the same problem and how have you sorted it out.
My Epson is Office Stylus BX635FWD.
Thanks

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Is the printer attached to the computer or is it a network printer?

My iTunes has stopped working with Windows 8 (worked fine at first).

Error message states "iTunes could not connect to iTunes store. Unknown error (0x80090318). Anyone else have this issue?

Hello kagreenebean
If you are having issues connecting to the iTunes Store, check out the article below to troubleshooting and resolve the issue.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G

Itunes stops working with vista

Has anyone had problems with itunes stopping working with windows vista? I have tried all the upgrades but itunes still stops working when playing songs and videos.

Tizzy79,
Your computer is blue screening. This is frequently caused by problems with driver conflicts or a computer virus. Make sure you've scanned your computer for viruses and spyware.
If that doesn't help, let's capture a minidump of the crash and send it to the Apple engineers to analyze.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties". In the dialog that comes up, select "Advanced System Settings" on the left. In the dialog that comes up, select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
You need to send that file to our buddy Roy, [email protected] Make sure that you include:
(1) the mini dump file.
(2) the link to this thread.
(3) a one line description of your problem, i.e. "iTunes Blue Screens Vista".
(4) the username that you're using here in the discussion boards.
Roy is getting a little swamped with messages and needs to make sure he gets all the information. And if he doesn't get that information, the message is just going to get dropped on the floor.

Printer, CP4025, stopped working with Windows 10 upgrade

Similar Messages

Maybe you are looking for