Ajuda com Product/Software Component/Business System

Pessoal
Preciso de uma ajuda de vcs, estou com um ambiente que o BASIS instalou tudo mas o Produto/Software Component SAP NFe 1.0 não está aparecendo no SLD portanto nao consigo fazer a amarracao com o Business System ( que foi criado ).
Vcs sabem me falar a nota ou sp que crie/instale esse produto no meu SLD?
Grato

Atualize a versao do SAP CR Content para qq versao superior a 3.10 (recomendacao eh a a ultima versao disponivel, acho q é 6. alguma coisa). Detalhes de como faze-lo: SAP Note 669669.
Abs,
Henrique.

Similar Messages

How to create Product, Software Component..after the XI Installation

Hi Experts,
SAP XI was installed completely. After this, I would like to test some sample File File scenario. But I am not sure, how to create the Product, Software Component etc. I am able to login and run the SXMB_IFR to get the XI tools.
Can some one please provide the initial steps / procedure, what else I need to do (like creating Product, Software Component etc) as soon as the XI installation was finished.
Thanks in advance.
Sree

hi Sree,
You can create this in SLD>Software Catalog>new Software component and create the SWC with the new version.
As you know, the SWC acts as place holder for all your design objects. In simple terms, the newer version will be an enhancement to your older released version with added functionality.
Also refer to the following links on help.sap.com for more detailed explanation and look for the compatibility changes when developing a new software component version.
http://help.sap.com/saphelp_nw04/helpdata/en/29/17647d028113439108ce1161263b6e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/71/0b99063e1f974d9f25951746d04dc3/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/87/59c5726d8b5141bf22831a6ce79d8a/content.htm
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
/people/scott.braker/blog/2005/01/20/software-deploymentcomponent-archive-basics
please reward points
Regards
Sreeram.G.Reddy

" Product / Software Component " Concept

Hello Everyone
Can you pls. explain the concept of <b>Product & S/W component</b>. I mean the relationship between the two.
How they are important while transportation of the objects.
Best Regards
Lalit

1 Product has Many S/W Components
we import S/W in IR and work with them...
The product SAP R/3 Enterprise, which represents an SAP technical component, has, among other things, a product version SAP R/3 Enterprise Core 4.7. The software unit that represents the functions of this product version has the same description as the product version. Various software components (or versions) fill the functions of this software unit. These software components (or versions) are, among others, SAP Basis 6.20, SAP HR 4.70, and SAP Enterprise Retail 1.10.
for more details
http://help.sap.com/saphelp_nw70/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm
Regards.
Jeet.

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
                                    OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1.      Call the wizard-based configuration tool as described in Configuration Wizard.
       2.      Select the scenario PI and the task PIPostInstallProcess.
       3.      Choose Execute.
A list of the steps to be executed by the wizard is displayed.
       4.      Choose Install.

Missing business systems in model configurator

Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, Trevor

Dear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

Business Systems for File to File Configuration

Good day.
We need to created two (2) Business Systems for our File to File Configuration.
Configuration Details:
SWCV must be attached to a Product.
Technical Systems must be Third Party.
Business Systems must be identified as an Application System.
Problem is that i don't know where to start. Can you help me.
Thanks.

Hi Abe
Pls. follow below steps -->
In SLD
1. Create the Product & Software Component for File Systems.
2. Create the Technical systems as Third Party & select the Installed Products for File systems accordingly.
3. Create the Business Systems & select the corresponding technical system.
In IR
1. Import the SWCV from SLD using Tools --> Transfer from SLD option
2. Create the Data Type & Message Type for source & destination .
3. Create the Inbound & Outbound message interfaces
4. Create the Message Mapping & interface Mapping.
In ID
1. Create the scenario
2. Using context menu of Business System. Assign Business system for Source & target systems
3. Create the Sender & receiver file adapter.
4. Create the receiever determination, interface determination
5. Create the Sender & receiver agreement.
- Lalit -

Model Configurator - Business System not listed

Hello,
I have the following problem when using the model configurator to create a configuration scenario based on an integration scenario.
I want to assign a communication component to a product. However the according communication component is not listed in the value list for a specific product.
I have added the product to the business system (installed) in the SLD and also cleared the SLD cache. However the communication component is still not listed.
Any idea what else I could try?

Hi, I have the same issue. How did you make it show up in the value list? The input box on Model Configurator won't simply let you type it in.

Can't delete Software Component in Integration Repository

Created Software Component,technical system, business system in SLD. Imported SC into IR (didn't create any scenarios/Dt/Mt/mi/etc yet).
Want to delete the Software Component and remove it from Integration Repository. Was able to delete in SC SLD, but cannot detemine how to delete in IR. The delete option is gray out. Any ideas..

Hi,
If you haven't activated it yet, then you can simply Reject Changes from the change list.
Otherwise, to delete SC you need to delete the SC Version (open for editing and choose "Delete SC version" from the menu). It is possible after you removed all namespaces and their objects.
The SC will be removed if it has no SC Versions in the IR.
Hope this helps.

Proble in SC State while adding a software component into a Track

Hi all,
I have created a product, software component in SLD and added the dependencies to the software component in SLD and in CMS i created a track and include the software component which i have created in SLD. For this software component SC State is not at all displaying (red, yello, green). How to change the SC state of the software component. Is there any procedure to do that, if so could any tell me the procedure.
Thank and Regards,
Ramesh.

Is there any DC checked in?

How to decide no.Technical and Business Systems required for any senario

Hi XI experts
     I am very new to XI but it is very interesting ....
     To develop any scenario how to decide Technical systems and Business
     Systems...
     For any scenario but how to decide the systems howmany to create ?
     I had a scenario like SOAP to RFC to SOAP ? For this how to decide?
     One more like FILES to BPM to JDBC ...like
     Can any one explain me for any scenario which may include SAP
     R/3,CRM,APO,BW,JDBC,SOAP,RFC...any system.
Adv..thanks and points to all
Kiranlvs

Hi Kiran.
Ok here I will try to answer your question.
1) SOAP (Web Service) -> RFC (R/3) -> SOAP (Web Service)
a) you will need to create a Business System for R/3.
b) you will need to create a third party business system or a business service for the Web Service system.
2) File (File System) -> XI -> JDBC (Database)
a) you will need to create a third party business system or a business service for the File system.
b) you will need to create a third party business system or a business service for the Database system.
note: BPM is one of the functionality of XI so there is no need to create a BS or TS for it.
3) CRM or APO or BW (SAp Systems) -> XI -> IDoc (R/3)
a) Business System for CRM or APO or BW
b) Business System for R/3.
The bottom line is you need to create Business System for any SAP system that is part of you integration scenario or when you have to Idoc, RFC and Proxies.
If the business system already exists for the SAP system then you just need to attach your SWCV or Product to that Business System.
Regards,
Ashish

About ABAP Technical Systems and Business Systems

Hi experts,
I have an Integration scenary with XI and an R3 vía RFC. I've already created it in the development environment and when I'm going to transport to Consolidation and Production I find that the ABAP Business System related to the ABAP Technical System of the R3 have a different name from the development one.
In the Integration Repository everything its OK because my scenario is developped on a third party system BS and TS. The problem is in the Directory because of the BS of the Message interfaces....
I think that transport Directory scenario with .tpt wont work. I'll probably have to develop it in each environment... What do you think?
Regards
Gonzalo

This is what you need to do to move from Dev to QA.
1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
3. Now, create the QA Tech and Business Systems in the QA SLD
4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
Regards
Bhavesh

PI 7.1 third-party business system and software component.

Hi,
I wish to know if it is possible to associate a third-party business system to a software version and therefore to a software component.
This is importnat for me to know it applied to teh PI 7.1. I know that for abap and java this is possible.
Any help will be well appreciated.
Thanks in advance.
Regards,
Giovanni

Hi,
go to SLD.......go to Business system......click on new business system to create it.........then select your technical system for third party........then tell the sw component to be linked to the third party business system........then your third party business sytem will be linked to the sw component in PI7.1.
Regards,
Rajeev Gupta

How to Create Software components , Technical systems , Business Systems

Hi,
How to Create Software components , Technical systems , Business Systems and Logical Systems
and Link between them. foe different adapters.
Ponts will be awarded..
Regards,
Jayasimha Jangam.

Steps to create software component,
1. Goto SLD --> Software catalog
2.select new product
3.Fill the Vendor, Name , version and choose create
4.now go back to the SLD main page and then choose software type as sofware component
5. select new component and in the next page select your product which you have created in the previous step
6.then give your vendor, name and version and choose create
7. now the sofware component is created, you can import the same in you integration repository for your scenario
Go through the following link which gives you a clear idea about technical, business systems,
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

Message interface not exist in any software components on business system

Hi Experts,
In development-environment we have an interface (SAP->XI->3rd party system) with a conditional receiver determination (based upon a fieldvalue in RFC that comes from SAP, "CONTROL_RECEIPE_DOWNLOAD"). This functions properly in development.
After transport to production environment this structure is not known when I try to use it in the Integration Directory when creating a conditional receiver determination. Double-click on the interface does result in the startup of the integration builder, but the interface itself can not be found. The following error-message appears:
"Error message Message interface does not exist in any software components installed on this business system"
All design-objects have been put into production and in Integration Builder the structure is available. In IR it is not...
In development In the business system of the sending SAP system, I can see the interface. In production, I don't see any interfaces at the business system....so this might be the problem but how can I add an interface manually to a business system?
Can anybody please help?
Thanks in advance
William

Hi William,
One more thing. In Production, check the technical system of source. SWCV in which you have developed your interface, should be installed on the source system. If this SWCV is not in list of your installed products & SWCV then add it. Update the business sytem in ID again & it will work. I guess you have done a typo by saying that objects are not available in IR but in Integration builder its avaliable.
Regards
Sushil

Ajuda com Product/Software Component/Business System

Similar Messages

Maybe you are looking for