Albums appear in different locations

I have quite a few various artist albums in my library, some appear under V and other appear at the end on the collection after numbered artists (10cc, 10000 Maniacs etc) information in album info appears to be the same for albums in different locations and source files. Not a massive problem I know but frustrating!  

ComputerFixer wrote:
From what i understand,  there is a check period (every hour) that time capsle will search through your HDD for files that are not backed up.   I think it is supposed to stop while the laptop is in battery mode, but there is always the possibility that it is checking anyway, which would contribute to some battery drain.
Time Machine has an option called "Back up while on battery power." I have that option turned off.
I don't think Time Capsule is a significant contributor to this. The check is simply a quick poll over the network. The network traffic and energy use for this check is probably a lot less than whatever power the CPU and radio consume checking email and loading up whole web pages.
The wifi signal strength may be a factor, but on the whole it's hard to say what's really causing the difference without inventorying the specific settings and applications in use and the CPU loads of the applications.

Similar Messages

  • Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

    Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

    Generally setting a common Album title and Album Artist will fix things.
    For compilations that aren't, select all tracks, Get Info, and on the option tab set Part of a Compilation to No. If it already says No tick the box alongside, then click OK.
    For deeper problems see Grouping tracks into albums.
    tt2

  • Video appearing in a different location

    Hello everyone,
    I'm somewhat new to Dreamweaver and just completed a website with embedded QuickTime videos. All the pages look identical except for one in which the video appears in a different location on the web, than it does in Dreamweaver and the browser preview. The code for each page layout is identical. Any help resolving this would be appreciated.

    Post a URL to the page please.  The answer is in your code.
    HTML Validator - http://validator.w3.org
    CSS Validator - http://jigsaw.w3.org/css-validator/
    Video Streaming Tutorials http://www.mediacollege.com/video/streaming/
    Nancy O.

  • Trying to import a CD. iTunes put the content into four different locations. I wanted to import it as an album.

    The CD is a new release, Water Night by Eric Whitacre. When I tried to import it, the titles on the album ended up in four different locations! I want all of the songs in the same location so I can load it onto my iPod as an album. I found no way to do this, so I cobbled together a playlist and loaded it that way - but I don't have the cover art or the convenience of playing it as an album. Anyone know what to do about this?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • Uploaded music to iCloud and it broke up my albums, I now have the same albums in different location with 2 or 3 songs on each one, can I make them whole albums again and how do I keep it from happening again?

    uploaded music to iCloud and it broke up my albums, I now have the same albums in different location with 2 or 3 songs on each one, can I make them whole albums again and how do I keep it from happening again?

    The iTunes Match forum is here: https://discussions.apple.com/community/itunes/itunes_match

  • Am I able to assign different lists of favourites to different Locations in Mac OSX 10.6? (ie, my work favs when work network settings applied and home favs appear when home network settings applied?)

    # Question
    am I able to assign different lists of favourites to different Locations in Mac OSX 10.6? (ie, my work favs when work network settings applied and home favs appear when home network settings applied?

    The local firewall is off out of the box.
    The log on the Netscreen shows nothing out of the ordinary. Shows the connections being established then closed.
    Support for the firewall is long gone.
    I can try calling Apple but I do not look forward to that call just to be told the firewall is at fault and there is nothing they can do about it.

  • Showing visible JPopupMenu in different location does not appear

    In my application if a popup menu is already displayed and the user right clicks to reshow the popup menu in a different location the popup menu disappears. I have included a very simple sample app below that shows the problem.
    Any suggestions as to what I'm doing wrong gratefully received.
    import java.awt.event.MouseEvent;
    import java.awt.event.MouseListener;
    import javax.swing.*;
    public class Test extends JFrame implements MouseListener {
      public static void main(String[] args) {
        Test test = new Test();
        test.setVisible(true);
      JPopupMenu popup;
      public Test() {
        super("Test");
        popup = new JPopupMenu();
        popup.add("Test1");
        popup.add("Test2");
        setSize(400, 300);
        getContentPane().addMouseListener(this);
      public void mouseClicked(MouseEvent e) {
      public void mouseEntered(MouseEvent e) {
      public void mouseExited(MouseEvent e) {
      public void mousePressed(MouseEvent e) {
        popup.show((Component)e.getSource(), e.getX(), e.getY());
      public void mouseReleased(MouseEvent e) {
    }

    Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html#popup]How to Use Menus. It shows a better way to check if a popup should be displayed.

  • I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months a year.  So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

    I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months each year.  When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud?  Does Icloud push all the new calendar and contact items over the old items?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Same album name by different artists

    Hi Everyone,
    Im having an issue that I have 3 x 'Greatest Hits' albums by 3 different artists. The problem is that on my 160gig Classic the menu shows each of the albums individually when scrolling through the 'artist' menu. However when scrolling through the 'album' menu the songs for all 3 'Greatest Hits' albums appear under 1 heading. They are not selected as being a compliation on either itunes or on the ipod directly. Is there any way to seperate them without changing the album names? Please Help!

    http://discussions.apple.com/thread.jspa?messageID=7743599&#7743599
    and
    http://discussions.apple.com/thread.jspa?messageID=7229921&#7229921

  • Songs saved in two different locations, why?

    I was looking around my hd today and found that I have two copies of many of my mp3 files, some of which i deleted months ago. The first set of songs are in the "Music" folder and are only sorted by file name. The second set is located in music>itunes>itunes music and is sorted by artist then album, the same as in iTunes.
    I have two questions. Firstly, is it safe to delete the copies in the Music folder and just use the ones in the iTunes folder? And second is there any way I can stop this from happening in the future?
    Thanks

    May I ask a related question, since what I'm trying to do is to avoid having songs in two different locations? (If not, just tell me the rules; I'm relatively new to Discussions, as well as being a new Mac OS X user!)
    I've set up separate user accounts for my children on our iMac. They want to put music on the computer, but their interests overlap somewhat. In order to avoid having the same songs copied into the iTunes Music folder of more than one user, and to allow all users to access all music files, I followed a suggestion from David Pogue's book on OS X, namely to put all the music in an iTunes Music folder in the ~/Users/Shared folder, and then make that the default folder for each user by changing the iTunes preferences.
    The problem with this was that then my son was unable to copy (import?) the music from a CD by dragging it to his iTunes Library icon--error message said he didn't have access to the folder--whereas he had been able to do so when ~/Users/HisUsername/Music/iTunes/iTunes Music was his default folder. I tried to solve this problem by changing the permissions on ~/Users/Shared/iTunes Music to be read & write, but then everyone but me started having problems running iTunes (it would give an error message saying "iTunes is on a locked disk, or you don't have access . . .").
    Lots of people seem to have the same problem (i.e., error message in running iTunes), but leaving that aside my basic question is what's the most efficient way to store and access music files so that (a) everyone can access it, (b) the number of duplicates is minimized, and (c) individual users can add music to the computer? Any suggestions will be very welcome!
    --Eric

  • Setting backup on two different location

    Hello, people. I am a newbie DBA and at my work place , Using RMAN for my backup strategy I want to set up a backup to two different location ( e.g A:\backup and B:\backup), I have configure two channels, and also set configure device type disk parallelism 2, but I seem not to be getting the result i need.
    What does configure device type disk parallelism actually do?
    For me to proceed, what do i need to do? thank you.

    Question is, do you want A:\ & B:\ backup locations to by synchronized? If so, you'll need to use the COPIES parameter (could also copy the backupset once the backup is complete). Setting the PARALLELISM alone will not synchronize the two backup locations.
    In your case, it would appear that you manually allocated multiple channels with a format specified, therefore RMAN produced the three pieces in A:\ and the one piece in B:\ .
    What you'll experience with multiple copies AND multiple channels (parrlelism 2 for example) is that one channel will grab a group of files and begins backing up to the multiple locations while channel two grabs another group of files and begins backing up to the multiple locations at the same time.
    Hope this helps.

  • Why does PSE 10 Organizer jumble up photos on the same date from different locations ?

    I have PSE 10 installed on a PC with Windows 7. My camera is a Nikon D90 using a Sandisk 8 gb SD card. When I take photos at different locations on the same date and download them into the Organizer , instead of keeping the photos from the different locations together by location, it jumbles them all up. It does not keep them in order by time taken from first to last for that day , it just mixes them all up in random order. Why ?

    Hi Lyndy,
    When you use Albums and Keyword Tags, you aren't moving the images around (they stay in their folders) - you just look at them differently.
    What you can try is this:-
    1) select one of your folders in folder view so that it displays all of those images in filename order
    2) click on the instant album button (to the top right of the thumbnails)
    This will generate an album with the same name as the folder
    3) Now switch to Thumbnail view
    4) click on the new albumb name on the right side
    Now, all the images should be in date/time order - you may have adjust the options
    The real power of the Keywrd Tags is the many different ways you can look at the images.
    If you have a Keyword Tag structure like this:-
    Places
         Scotland
                Holyrood
                Britania
    Then if you assign the Holyrood and britania tags to the appropiate photos, there are various ways of viewing the photos.
    Selecting just Holyrood would show only the Holyrood ones
    Selecting Scotland would show both Holyrood and Britania ones.
    The only limit seems to be your own imagination
    I hope that gives you ideas rather than adding confusion
    Brian

  • New album appears

    I have been editing some photos within an album. I have noticed twice now that a new album just appears without my doing. I cannot even explain this. For example, I am working in an album titled "Martin/ Dees 3" and unexpectedly "Martin/ Dees 4" appears. This new album that appears contains all of the pictures in the one that I actually created and had been working in plus 1 or 2 extra (these I deleted or moved to another album). The last time this happened I noticed that I had copied some photos to another album (with a different name). I have not a clue as to how this happens. Can anyone explain what is happening? Thanks in advance!

    Spooky. And also, have you noticed, two identical posts on here as well. Spooky.
    Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    Regards
    TD

  • RMAN backup to 3 different locations

    Hi,
    I'm trying to backup my database to 3 different locations. If one location is unavailiable backup fails. Is there a possibility to make backup to other 2 locations when one is unavailiable? For example second location from following code is unavailiable. Here is my code:
    RUN
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
    CONFIGURE DEFAULT DEVICE TYPE TO DISK;
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup/location1/%d_DB_%u_%s_%p', '/backup/location2/%d_DB_%u_%s_%p', '/backup/location3/%d_DB_%u_%s_%p';
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 3;
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 3;
    BACKUP DATABASE PLUS ARCHIVELOG SKIP INACCESSIBLE;
    }

    Hello again;
    I was able to find an example of your other question :
    If you specify a nonexistent directory, RMAN displays output such as the following:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/29/2001
                14:36:04
    ORA-19504: failed to create file "/nosuchdisk/0cd2momi_1_1"
    ORA-27040: skgfrcre: create error, unable to create file
    SVR4 Error: 2: No such file or directory
    Source
    Spreading a Backup Across Multiple Disk Drives: Example
    Database Backup and Recovery Advanced User's Guide
    So it really looks like it errors, ORA-19504 appears to be the key.
    Unable to find any Oracle note regarding skip. Interesting question.
    Best Regards
    mseberg

  • Items in the shopping cart appear with different price than in the catalog

    Hi All,
    We are running SRM 5.0 (Classic Scenario) with external catalogues.
    After selecting items from the external catalogue and transferring them to the shopping cart, the items appear with different price(the problem exists in the productive system)
    The strange thing is that there is no dependence or sequence between the differences. For example, in one shopping cart, one item is with correct price, the price of the other item is not correct (when I click on the icon which is  showing item details in the catalogue, the price is different than the one in the shopping cart). Sometimes the difference is significant, sometimes not - if the item price in the catalogue is 22.34 EUR, in the shopping cart is 21.22EUR or if the item is 45.62EUR in the shopping cart is 45.60 EUR. There is no logic.
    I tried to create a shopping cart in the support system, with the same items from this catalogue, and they are sent back in SRM with the correct prices.
    I traced all OCI parameters, sent from the supplier catalogue, and everything is correct.
    At the example given below the price in the shopping cart ordered in the productive system is 69.00CZK, and after that during the test the correct price of 73.870CZK has appeared.
    NEW_ITEM-DESCRIPTION==Durable-KeyClip-keytag%2C+black
    NEW_ITEM-MATNR==
    NEW_ITEM-MATGROUP==
    NEW_ITEM-QUANTITY==10
    NEW_ITEM-UNIT==EA
    NEW_ITEM-PRICE==73.870
    NEW_ITEM-PRICEUNIT==1
    NEW_ITEM-CURRENCY==CZK
    NEW_ITEM-NEW_ITEM-LEADTIME==1
    NEW_ITEM-VENDOR==
    NEW_ITEM-VENDORMAT==0176%2F1957001
    NEW_ITEM-MANUFACTCODE==
    NEW_ITEM-MANUFACTMAT==
    NEW_ITEM-CONTRACT==
    NEW_ITEM-CONTRACT_ITEM==
    NEW_ITEM-SERVICE==
    NEW_ITEM-EXT_QUOTE_ID==
    NEW_ITEM-EXT_QUOTE_ITEM==
    NEW_ITEM-EXT_PRODUCT_ID==23109
    NEW_ITEM-EXT_SCHEMA_TYPE==UNSPSC
    NEW_ITEM-EXT_CATEGORY_ID==55121504
    NEW_ITEM-LONGTEXT_1%3A132==Durable-KeyClip%0D%0Akeytag%2Cblack%0D%0A%0D%0A6pc
    I checked the error log in SLG1 for BBP_OCI, and no error message exists. In my opinion the problem can be in supplier system, because otherwise all items will be with wrong price. And at the moment, there are shopping carts in which all items are with the correct price!
    It is not something in the user profile, because in one shopping cart created by one user some items are correct, some of them not.
    I also checked with the supplier,  they said that they haven't change the price, recently.
    Has somebody of you met this problem?
    In the IMG-> Define External Web Services (Catalogs, Vendor Lists etc.) I have set all parameters for the standard call structure: the URL of the supplier, our company ID and password for their catalogue.
    In the Detail view for the catalogue, the following parameters are set
    u201CAdditional functions in the product catalogueu201D field:
    -     Display product data again in the catalogue
    -     Validate product data from SAP Enterprise Buyer
    -     Find supply sources
    u201CTechnical Settingsu201D field
    - Use Error Log
    Thanks,
    Desi

    That means that we are not maintaining material numbers in SRM, so there are no predefined price or info records for that materials in R/3 system, or in SRM.
    In the set up of external catalogues, validation of the price is set. Which means that, if a new shopping cart is created from already existing one, and meanwhile, a change of the price is done by the supplier in the catalogue, the new item price will be adopted in the shopping cart.
    No prices are maintained in the SRM system, everything is from the supplier catalogue.
    Desi

Maybe you are looking for