ALE Config for Solman BPs

Is there any documentation out there to help me in setting up ALE between ECC and Solman to create BPs in Solman. I have basic documentation on ALE config in general but am looking for specific docs for Solman BP population.
Thank you,
Alex

Hi Alex,
Solution Manager was based on CRM so I will recomend you to start with Note 550055 - EBP/CRM: New integration for business partner
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index
This will give you the guideline, what I would suggest is to mantain as well the Org Structure in 1 system in this case ECC and then replicate maybe the Support Org Structure along with the BP's to Solution Manager.
Another SAP Note you cam use 615896 - HR-ALX: Distribution models - Templates, Most probably you have the templates in your system if you have current SP's, I do remember I saw some templates for CRM which will work fine for Solution Manager.
Hope this helps
Best regards,
Juan Jose Alvarado
Edited by: Juan Jose Alvarado on Mar 1, 2010 5:27 PM
Edited by: Juan Jose Alvarado on Mar 1, 2010 5:31 PM

Similar Messages

Purchase Order Download ALE Config for automation

We need to automate the current PO idoc creation message download whenever a PO is created , changed or deleted. We have set up an output type Z005 for it and manual creation of idocs from the Purchase Order works fine. We need to automate it though. We have used the transactions NACE, VK01 and MN04 but the PO download message ORDERS is not triggered automatically.
regards
Aveek Ghose

Hi Aveek,
You first have to check if the output type you have customized for the Purchase Orders is triggered. So create a PO and check in the message determination that your output type is triggered. If it has been triggered save the Purchase order and re-enter the purchase order to check the message has been processed succesfully (yout output type should be "green" now).
Regards,
John.

Urgent...problem in manuall ale config

hi all,
when iam doing ale config for a a simple vendor master data transfer i got error.
the first 3 steps r ok. rfc destination and test connection and remote logon is ok.
in step 4 ..i assigned a message type(cremas) to the modelview.when i expand modelview i shows sender lg sys,rec log sys and cremas,no fillers in cremas.
1)but when distribute modelview it shows no message type is assigned to modelview.
2)in partner profiles i generate ports . here also i got error. partnet profile is not generated to the xxxx log sys and cancelled in both xxxx and yyyy log sys..
reply please.
vijay

Hi,
Try creating the ports and partner profiles manually through transactions WE21 and WE20 respectively and then the distribution model (txn BD64). Now try distributing the model view and proceed with the Idoc generation.
~ Bineah.

Transport abt ALE Config

Hi,
We have done all IDOC to File scenarios
We have configured the ALE settings on SAP R/3's DEv server.
Can i transport these Config to SAP R/3's QTY Server or Should i create them as it is appear in the SAP R/3's DEV server???
Regards
Suman

Hi Suman..
This was the ALE settings...
Steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.\
idoc to idoc
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
regards,
Kishore

CRM to PI outbound IDOC scenario : IDOC ALE config

Hi folks,
I have a scenario: CRM-> PI
CRM system posts an IDOC to PI,
I have done all the necessary ALE configs:
1. comm. id on PI
2. RFC Destination on CRM to PI
3. Port on CRM. we21
4.Logical SYsm on CRM
5. Partn Prof on CRM
now, when i try to push out an idoc out of CRM , it fails in CRMs TRFC queu(SM58)
with this error:
Transaction IDX1: Port SAPDX1, client 500, RFC destination contain error
I have no clue why it failed with this error.
1. No idea from where it picked up this port as well.
2. Port i created to PI was an autogenerated Port and not SAPDX1, don't knw how it picks this up.
Would appreciate any help with respect to this.
Thanks,
Hank

Also, for your reference just double check if the following steps are completed properly for outbound processing:
1.Define Logical Systems and Assign Client to Logical System u2013 Transaction SALE
2.Maintain RFC Destinations u2013 Transaction SM59
3.Define Ports u2013 Transaction WE21
4. Maintain Distribution Model u2013 Transaction BD64
5.Generate/Create Partner Profile u2013 Transactions BD82/WE20
6.Distribute Model View u2013 Transaction BD64
    -Select the Model View
     -Go to menu path Edit -> Model View -> Distribute
     -Result log will be displayed on the next screen
Hopefully it should work now.
Puneet

Ale config part 2...question

Hi,
While doing the ale config as per blog...
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I managed to distribute the model view..however when i go to BD10 and select the specified material SWAR1...out of matmas...i get an error telling me that no material could be found.............How can i test that i can send an idoc to the XI system....? is there a standard material that i can send to verify this...
Venkat

There are no standard material numbers avaiable in SAP. All u need to do it to create in the TC MM01 and u can refer to the table MARA and the material number field is MATNR.
Coming WRT to the blog when u want to test it either u press F4 to get the list of material avaiable or check in MARA.

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Error while updating SP's for Solman

Hello ,
I am updating the SP's for Solman. and I have come across these 3 errors, how do I resolve them
1.Function RSDDTREX_INDEX_CHECK (RSDDTREX_CHECK     01) does not fit into the existing function group ((RSDDTREX     06))
2.Table RSBGUI_R_TEST is not in nametab.
3.     Phase ADDON_CONFLICTS_?: Explanation of Errors
     Conflicts were found between the Support Packages that you want to
     import and the Add-Ons installed in the system. To guarantee the
     consistency of your system, the import is interrupted until all Conflict
     Resolution Transports (CRTs) for the listed Support Packages are
     included in the queue.
     To include the CRTs in the queue, proceed as follows:
     #NAME?
     - Leave this screen by choosing 'Cancel' (F12).
     #NAME?
       Service Marketplace or request them from your Add-On supplier.
     #NAME?
     #NAME?
       the beginning.
     If the problem involves an SAP Add-On, see SAP Note 53902, which tells
     you which CRTs resolve the conflicts. Otherwise contact the supplier of
     your Add-On for details on how to proceed.
     The following contains a table of Support Packages for each Add-On for
     which conflicts were detected. The column 'Information on the Conflict
     Resolution' specifies how you can resolve a conflict. For more
     information, select the corresponding 'Information for the Conflict
     Resolution'.
     Note:
     You are importing the queue in the test scenario. As this scenario is
     only used for performing analyses, you can skip the errors and continue
     the import in the next phase.
     In the standard scenario, however, note that the errors have to be
     rectified before importing can be continued in the next phase.
     Conflicts Between Add-On ST-SER 700_2006_1 and Support Packages
     Component     Release     Support Package     Information onConflict Resolution
     ST     400     SAPKITL425     CRT: DUMMY
Thanks Druva

Hi there,
Thank you cauz I did get some lead into the issue with your response.
I missed on some ST's which did give me a CRT error and I downloaded them and the problem is fixed now.
I have another question in my new post please have a look at it.
I am closing this thread.
Thank you
Druva

Config for Dispatch Intrastat

Hello Experts,
Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
Regards,
Karan

Hello Karan,
We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
Thanks,
Sarthak

Vendor Payment Terms config for 30%advance 70% after GR

Hi Guys,
How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
Please suggest your expert comments.
Thanks in advance.
Regards,
Jackie

sappassion2011 wrote:
Hi Guys,
>
> How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
>
> Please suggest your expert comments.
>
> Thanks in advance.
>
> Regards,
>
> Jackie
Hi Jackie,
Do them in trxn OME2
Regards
Shiva

What's the best Mac Pro config for Fireworks?

What's the best Mac config for Fireworks?
I can pretty much get whatever Mac I want at work... My boss is sick and tired of watching Fireworks crash all the time... I figure a hefty processor and lots of RAM and maybe a SSD will help…
I should get a Mac Pro right? Which processor?
• Two 2.40GHz 6-Core Intel Xeon processors (12 cores)
• Two 2.66GHz 6-Core Intel Xeon processor (12 cores)
• Two 3.06GHz 6-Core Intel Xeon (12 cores)
Should I get 24GB RAM?? Or is that overkill?
I'll get a 2TB serial hard drive…
I should get a 512 GB solid state drive offered by Apple right?
Or is it possible to get a larger better 3rd party SSD?
And then maybe two 21" Displays… Two 27s seems a little much… or does it?
Thanks in advance.

Oh and what about video cards? Or is Apple's default ok? (I'm not doing hard core PhotoShop retouching or anything).

Looking for SEM-BPs Bw doc's and Traig material

Hi All
Guys please help me for BW BPS Training Material and Doc's
Thanks
Stob

Besides the How-to-Guides available in SDN, you can also refer help.sap.com
Goto SAP Netweaver> Information Integration>BW>BPS
To get a SEM oriented perspective, you can visit service.sap.com/sem; documentation on SEM-BPS is available there
Also, in help.sap.com....... if you go to mySAP ERP ; you can goto SEM and refer the BPS details there
From my experience if you are looking at help while doing hands on ...... help.sap can prove to be a handful
Cheers

Add file config for hole application?

Hi everyone,
Is there any one worked with build file config for hole fusion adf application? It is similar with web.config in .NET ASP web site. I think in jdeveloper, we can use web.xml for add some parameter but don't know how to read this parameter?
Any help is appreciate!
Thank.

User, please tell us your jdeveloper version!
In general you can read context or innit parameters from web.xml.
You get to them via the servlet context
String databaseHost =getServletContext().getInitParameter("database.host");
And to get to the servlet context use
FacesContext ctx = FacesContext.getCurrentInstance(); ServletContext servletContext = (ServletContext) ctx.getExternalContext().getContext();
Timo

No System selectable in Maintenance Transaction for SolMan 7.0 itself

Hello,
I would like to update Solution Manager 7.0 SPS17 (SAPKITL427) to EHP1 with a "Maintenance Transaction". But in Basic Settings, when I choose Solution Manager 7.0, the System and Logical Component (which is configured) aren't displayed. So in the next Step, the Button "Find Download files" under "Calculate Download files automatically" is greyed out.
When I start a MOPZ for the connected ERP 6.0, the productive System (but Q and Dev not) and the configured Logical Component are selectable, and the Button works.
So, I checked the SMSY-Configuration for SolMan and the ERP P-System, and cannot find a difference. And I think, that the QAS- and DEV-System should be visible too?
Does anyone has an idea, what I have to check, to get the SolMan-System/Logical Component (and the QAS and DEV) in MOPZ?
Thank you very much
Regards
Rudolf

Thank you very much Waaseem,
Solution was Note 1247550 (as "Sub-Note" of 1122966): All system are now visible (SolMan, QAS and DEV)
When I now go to the second step I can choose "Maintenance" and select afer pressing "Find Download files" SPS till 21.
But:
For the ERP System I can choose "Enhancement Package Installation". As SPS 21 for Solution Manager is correspondig to EHP1, I think, I should see the choice "Enhancement Package Installation" for the solution Manager, too?
Is this correct? And, if not, should I solve it, to be able to install EHP1?
Thanks and regards
Rudolf

ALE Config for Solman BPs

Similar Messages

Maybe you are looking for