No System selectable in Maintenance Transaction for SolMan 7.0 itself

Hello,
I would like to update Solution Manager 7.0 SPS17 (SAPKITL427) to EHP1 with a "Maintenance Transaction". But in Basic Settings, when I choose Solution Manager 7.0, the System and Logical Component (which is configured) aren't displayed. So in the next Step, the Button "Find Download files" under "Calculate Download files automatically" is greyed out.
When I start a MOPZ for the connected ERP 6.0, the productive System (but Q and Dev not) and the configured Logical Component are selectable, and the Button works.
So, I checked the SMSY-Configuration for SolMan and the ERP P-System, and cannot find a difference. And I think, that the QAS- and DEV-System should be visible too?
Does anyone has an idea, what I have to check, to get the SolMan-System/Logical Component (and the QAS and DEV) in MOPZ?
Thank you very much
Regards
Rudolf

Thank you very much Waaseem,
Solution was Note 1247550 (as "Sub-Note" of 1122966): All system are now visible (SolMan, QAS and DEV)
When I now go to the second step I can choose "Maintenance" and select afer pressing "Find Download files" SPS till 21.
But:
For the ERP System I can choose "Enhancement Package Installation". As SPS 21 for Solution Manager is correspondig to EHP1, I think, I should see the choice  "Enhancement Package Installation" for the solution Manager, too?
Is this correct? And, if not, should I solve it, to be able to install EHP1?
Thanks and regards
Rudolf

Similar Messages

  • Adding maintenance transaction for a Z table

    Hello All,
    Can anyone tell how to add a maintenance transaction for a Z table.
    Thanks in advance.
    Best Regards,
    Sasidhar Reddy Matli.

    Hi
    Check this:
    able maintennace generator is used to create screen to maintain values in a table. Once you create maint generator you can goto transaction SM30 and add data to table . In SAP it is more relevant to customizing data.
    Create a table maintance program for a z table :
    In transaction SE11, in the attribute tab of your z table check table maintenance check box. Go to SM30 transaction, enter the ztable name and click on maintain button. Here you can enter new entries into the ztable .
    Or
    You can create a PARAMETER TRANSACTION for the transaction for SM30 .
    Follow these steps :
    1. go to transaction SE93 , give your own transaction code say ztran_tab, for maintaining your ztable.
    2. Click on create button and check the radio button Transaction with parameters (PARAMETER TRANSACTION) and click on the tick button.
    3. In the next screen enter default values:
    transaction : SM30
    check the check box skip initial screen
    4. Scroll down you will find a table control for default values
    Name of the screen field | value
    VIEWNAME | your ztable name
    SHOW | X
    Save your work.
    Now as you have created a custom transaction for maintaining your ztable this transaction can be called from any program with CALL transaction 'XXX'.
    Regards,
    Vishwa.

  • After TECO system  not allow any transaction for orders

    Dear all,
    We have taken TECO for Production / Process orders but system is allowing to cancel confirmation / to cancel GRN / to cancel operations.
    Actually we dont want to cancel any of the above said after TECO.
    How to restrict this one. Explain very clearly if it is possible.
    Thanks,
    Regards,
    Sakthivel.S

    Hi sakthi vel  
    You should go to transaction BS22, then click on status I0045
    After that change RMRU, RMWA and RMWF from Allowed to Forbidd.
    The problem will be solved.
    Regards
    Dinh Trung Tin

  • Main optimizer error - There is already a transaction for the system

    Hi Guru's,
       I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
    'There is already a transaction for the system of this product version'
    After this error, it does not proceed further.
    There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
    Any ideas or solutions most welcome.
    Moses

    As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
    You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
    Best regards,
    Joachim

  • Maintenance Transaction Table

    Hi guys,
    I have created a maintenance transaction for a custom table. It is using an SAP standard. It has an initial screen of showing 2 fields that is used to filter data.
    If there is no value placed in the second parameter, the cursor should automatically go to the blank text field.
    Is this possible? I used
    SET CURSOR FIELD 'FIELDNAME'.
    but not successful.
    <b><REMOVED BY MODERATOR></b>
    Thanks in advance.
    Benedict
    Message was edited by:
            Alvaro Tejada Galindo

    Is this what you are looking for:
      field  your_field   module validate_your_field    on request.
    *&      Module  VALIDATE_your_field  INPUT
    *       text
    module validate_your_field input.
      IF your_field IS INITIAL.
        MESSAGE E000.
      ENDIF.
    endmodule.                 " VALIDATE_your_field  INPUT

  • System not available for selection in Maintenance Optimizer

    Hello,
    When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
    Any ideas are helpful, thank you.

    Hello,
    There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
    Priority
    Short Text
    Product version
    When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
    I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
    Regards,
    Robert

  • There is already a transaction for the systems of this product version(MOPZ)

    Hello All,
    I am trying to configure maintenance optimizer in Solution Manager 7.0
    on Windows 2003 server and SQL 2005 server.
    I am configuring this for SAP CRM 2007 server.
    Created the server, database and system in SMSY
    Created Logical Component in TA code SMSY
    SM59 connection for SAP-OSS is OK.
    S-User is assigned to a User.
    Created a solution using TA code solution_manager.
    Defined the product version for the solution created in the TA code
    solution_manager.
    When creating a Maintenance Optimizer transaction, I select the
    product version and its logical component in the Plan Maintenance
    (Phase) and click on Continue to go to Select Files Phase, I get below
    warning:
    Information Procedure 8000000130 Saved
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    I cannot get pass this phase.
    I have deleted and recreated the solution, carried out the same
    activity again but its giving the same Warning
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    Any help will be appreciated???
    Regards,
    Satish.

    Hello Ragu,
    Thanks for your response.
    As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
    I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
    I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
    I was successful in configuring CRM and SOLMAN.
    But  when I tried to configure in ECC, it failed due to RFC erros.
    So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
    Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
    When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
    Please let me know if you need further information.
    Regards,
    Satish.

  • Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01.

    Dear Experts,
    We have solution manger 7.0 ehp1 ,
    ERP 6. 0 EHP4 Development server(seperate server) this is upgraded from erp 6.0 to erp 6.0 ehp4
    I configured the maintenece optimzer also. and created the RFC destinations also it is working fine. For downloading the support packages  In Miantenance optimizer I am getting the error.
    Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01
    I deleted the systems in SMSY and and recreated using the SLD refresh. Agin also I am getting the sama error for downloading the support packages. I chagned the systems details in the Service.sap.com also. in the logs it is showing the below error also
    No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)
    thanks

    Hello,
    we have the same error in our environment.
    Product version is EHP4 for ERP6.0 and we have both product version (EHP4 and ERP 6.0) active in the SMSY as described in SAP note 1464712 and nethertheless we get this error message.
    " No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)"
    Anyone with a solution here?
    Greets
    Jens

  • How to create transaction for a maintenance view, Thank you.

    How to create transaction for a maintenance view,
    Thank you.
    deniz...

    Hi Deniz,
    Go to se93.
    Then create the new T.code.
    Under that select parameter Transaction.
    Then give the sm30 in the t.code in default values tab.
    check the checkbox skip initial screen.
    in classification tab.
    click checkbox inherit gui attributes..
    Now below..
    In the default values..
    select
    viewname and give ur table name.
    UPDATE= Xsave
    view - table name ( Should be upper case
    update X ( should be upper case).
    http://www.sap-basis-abap.com/sapbs011.htm
    Hope this helps you.
    Regards,
    Viveks

  • Popup window for data selection in maintenance view

    Hi,
    How to create popup window for data selection in maintenance view. For example when you go to view v_t510 in se16, there you will see a popup window to enter values. after you enter the values in that window, then data related to those values that you entered in the popup window will displayed.
    How can we do that for the custom maintenance view?
    Thanks in advance for your help guys.
    Regards,
    Srinivas.

    In your custom maintainace view, if you select the Data browser / Table view maintainace under the tab "Maint Status" as "Dispaly maintanence allowed with restriction" than system will give you popup to restrict by selection.
    Regards,
    Naimesh Patel

  • Active transaction for the systems of this product version

    Hi All,
    When i tried to create a new transaction for maintenance optimizer, I received the warning below:
    There is already a transaction for the systems of this product version
    The solution from note 1296589 does not help.
    Transaction code /n/tmwflow/maintenance only show one open session (the current session).
    Regards,
    KayJay

    > When i tried to create a new transaction for maintenance optimizer, I received the warning below:
    > There is already a transaction for the systems of this product version
    What happens if you click on the button "Maintenance transactions" just next to the "new Maintenance" button?
    Markus

  • Maintenance Transaction - Status was reset by system

    Hi,
    I started the "Maintenance Transaction" under <Change Management - Maintenance Optimizer>
    None others transaction was found. I did <Create New Maintenance Transaction>, then I gave the poroduct version and next with <continue>
    II got a warning message Status was reset by system and There is already a transaction for the systems of this product version, after them the process stoped.
    I checked with <SLG1>, but I detected no importing messages.
    Regards
    Richard

    Hi,
    check this [maintenance optimizer problem|maintenance optimizer problem]
    Might be helpful.
    Thanks,
    Jansi

  • How to find Transaction for a Known Table maintenance View

    Hello Friends,
    May I know how to find transaction for a known table maintenance View.
    Thanks,
    Best Regards,
    Sudhanshu Garg

    Goto SE16 Transaction and enter TSTCP Table
    Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
    enter table name in bold.
    Thanks
    Seshu

  • Use visual composer for maintenance transaction of R/3

    Hi:
    Can I use the visual composer as a tool to connect to maintenance transaction of R/3.
    Can I use it to build a sales order or a porches order in the R/3.

    Does anyone know if you can use an IDOC interface with VC? Also, does anyone have suggestions for a BAPI for creating and displaying notifications?
    Any help is appreciated.
    Pete

  • Selecting Printer defined in VV22 Transaction for Smartform printout

    Hi All,
    Can any one help me. My requirement is to print a picking list output using smartform automatically when ever a transfer order is generated.
    The main problem is i have to select the printer which is defined in VV22 Transaction for that particular output type but when the smartform is called it is taking the printer defined in SU3 transaction.
    I have developed the smartform and now done the setting for automatic printing also by passing NO_DIALOG = 'X' when the function module is called but unable to set the printer defined in VV22 Transaction.
    Please let me know if you know the solution.
    Regards
    Ravi

    I think u can directly pass the printer name in ur driver program.
    eg:
    data: l_t_out TYPE ssfcompop.
    l_t_out-tddest    = 'LOCL'.
          CALL FUNCTION l_f_fname   -
    > Smartform Function Module Name 
          EXPORTING
                archive_index =  toa_dara
         ARCHIVE_INDEX_TAB =   TSFDARA
          archive_parameters =  arc_params
              control_parameters         = l_t_control
              output_options             = l_t_out
              user_settings              = space
              p_langu                    = p_langu
            TABLES
              g_t_item               = g_t_final
       EXCEPTIONS
         formatting_error           = 1
         internal_error             = 2
         send_error                 = 3
         user_canceled              = 4
         OTHERS                     = 5.
    Rgds,
    Pavan

Maybe you are looking for