"ALEAUDIT IDoc cannot find request IDoc in Integration Server" error in PI

Hi Experts,
i am getting error "ALEAUDIT IDoc cannot find request IDoc in Integration Server" and
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_NO_REQUEST</SAP:Code> in PI .
i am using ALEAUD.ALEAUD01 IDoc in my scenario.
i found two threads in SCN (scn.sap.com/thread/1370194,scn.sap.com/thread/1132815)but still i did not understand clearly for this issue .
Please clearly expline the solution for this issue in this thread ,i will give you points who post the correct solution.
Please send me solution for this issue clearly.
see the below payload also.
Thanks,
Aadi

the same problem
"ALEAUDIT IDoc cannot find request IDoc in Integration Server"
Could someone help with it?

Similar Messages

ALEAUDIT IDoc cannot find request IDoc in Integration Server

Hi,
i m working with a scenario SAP ECC 7.0 -> IDoc -> PI -> IDoc -> R/3 4.6c
I m sending a purchase order (ORDERS.ORDERS05) from SAP ECC and i want to receive an acknowledgment from R/3. Unfortunately there are only zeros in the field E1ADHDR / E1STATE / DOCNUM, this leads to the error "ALEAUDIT IDoc cannot find request IDoc in Integration Server" on PI.
Does anybody know what to do in the R/3 system to send the original IDoc number in E1STATE / DOCNUM?
XML Source of the ALEAUD received at PI:
<?xml version="1.0" encoding="UTF-8" ?>
<ALEAUD01>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>100</MANDT>
<DOCNUM>0000000004307392</DOCNUM>
<DOCREL>46C</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>ALEAUD01</IDOCTYP>
<MESTYP>ALEAUD</MESTYP>
<SNDPOR>SAPQV1</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>QV1CLT100</SNDPRN>
<RCVPOR>A000000022</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>QXC100</RCVPRN>
<CREDAT>20090605</CREDAT>
<CRETIM>111523</CRETIM>
<SERIAL>20090605111521</SERIAL>
</EDI_DC40>
<E1ADHDR SEGMENT="1">
<MESTYP>ORDERS</MESTYP>
<MESTYP_LNG>ORDERS</MESTYP_LNG>
<E1STATE SEGMENT="1">
<DOCNUM>0000000000000000</DOCNUM>
<STATUS>53</STATUS>
<STACOD>SAPV1311</STACOD>
<STATXT>&1 &2 wurde gesichert</STATXT>
<STAPA1>Terminauftrag EX</STAPA1>
<STAPA2>2510016042</STAPA2>
<STATYP>I</STATYP>
<STAMQU>SAP</STAMQU>
<STAMID>V1</STAMID>
<STAMNO>311</STAMNO>
<STAPA1_LNG>Terminauftrag EX</STAPA1_LNG>
<STAPA2_LNG>2510016042</STAPA2_LNG>
<E1PRTOB SEGMENT="1">
<DOCNUM>0000000004307353</DOCNUM>
<OBJTYPE>BUS2032</OBJTYPE>
<OBJKEY>2510016042</OBJKEY>
</E1PRTOB>
</E1STATE>
</E1ADHDR>
</IDOC>
</ALEAUD01>
Regards,
Udo

Hi Volker,
yes, that was the right hint
I needed to change the RCVPRT field to LS to force the receiving system to send the ALEAUD with original number at the right place. Strange reaction, but it is SAP software, he, he.
Regards,
Udo

Error: Idoc name IDoc cannot find request IDoc in Integration Server

Hi,
I am getting an error while working on a scenario.
scenario is Idoc to file. when the Idoc is posted, i am getting the error "ALEAUDIT IDoc cannot find request IDoc in Integration Server" when i see the status in SXMB_MONI
I have tested the message mapping and configuration induvidually. They are working fine.
Kindly help me out in solving this issue.
please reply

Hi,
The AleAduit sent in the case of Idoc to File if the file is posted successfuly is not actually a App Ack, and that is why we get the info Ack not possible.
But, as the R3 might expect this Idoc, XI still sends it back to the Source R3 system.
Regards,
phani

Cannot complete request because of a disk error

HI all,
I just upgrade to CS4 creative suite on my iMac and using for about 2 months. Everything is fine and great until recently.
Suddenly, I will always get this message "Cannot complete request because of a disk error" when I try to open or save the file in Photoshop CS4. Then, the program will freeze. Sometime re launch it will solve the problem but mostly not. I will need to force quit or restart my computer to make it go away. Also, when I start up the program, it takes a little bit longer than before to read the preference file. It will stay saying "reading preferences" for like about half to one minute.
First, I think there is a problem on my HD. I used disk utility to check it and the HD was fine. Also, the problem only happen in Photoshop but not others programs.
I really want to find out what's the cause of it.
Does anyone can help me figure out the problem? Thanks!
Rachel

you need to BACK up your data now
then add "disk error" to your search (it has been covered before)
you could have "bad blocks" on one of your disks that a scratch disk is hitting, or a file written over a bad area that can no longer be accessed
Basically, I would get the BACKUP done, then "Carbon Copy Cloner" clone the hard driver over to a new drive if you are lucky, the clone will get you back to work
If the problem is hitting on your Scratch Disk, you could try to "zerowrite" it to repair it
"" are all search words...

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Cannot find a report for SQL Server monitoring

We installed a SCOM 2012 environment recently and imported the SQL Server Management packs successfully. SQL Servers are being monitored.
However, in the reporting section, i cannot find a group for SQL Server Reporting. All other show up ( Active Directory, Appication Monitoring, Web monitoring, etc) Just none for the SQL Reporting.
Please help

Hi,
I assume that you miss some SQL management packs, would you please re-download the management pack here and import it:
https://www.microsoft.com/en-hk/download/details.aspx?id=10631
After successful importing, you should see it under reporting workspace:
If you still cannot see it, please check operation manager event logs for more information to help to troubleshoot this issue.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I cannot log in to iCloud account on my notebook. It says :"you cannot sign in because of a server error".

I cannot log in to iCloud account on my notebook. It says :"you cannot sign in because of a server error".

Hello knitterspinnerweaver,
The article linked below details a number of steps that can help get you logged into FaceTime on your Mac.
Get help signing in to FaceTime, Game Center, Messages
https://support.apple.com/en-us/HT204408
All my best,
Allen

'Cannot begin data load. Analytic Server Error(1042006): Network Error

Hi...
I got a error message when I upload data from source file into Planning via IKM SQL to Essbase (data).
Some records are found following errors.
'Cannot begin data load. Analytic Server Error(1042006): Network Error [10061]: Unable To Connect To [localhost:32774]. The client timed out waiting to connect to the Essbase Agent using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct'
What is this error about? is the commit interval too large? now the value is 1000.

Hi,
You could try the following
1. From the Start menu, click Run.
2. Type regedit and then click OK.
3. In the Registry Editor window, click the following directory:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters
4. From the Edit menu, click New, DWORD Value.
The new value appears in the list of parameters.
5. Type MaxUserPort and then press Enter.
Double-click MaxUserPort.
6. In the Edit DWORD Value window, do the following:
* Click Decimal.
* Enter 65534.
* Click OK.
7. From the Edit menu, click New, DWORD Value.
The new value appears in the list of parameters.
8. Type TcpTimedWaitDelay and then press Enter.
9. Double-click TcpTimedWaitDelay.
10. In the Edit DWORD Value window, do the following:
* Click Decimal.
* Type 300
* Click OK.
11. Close the Registry Editor window.
12. Reboot essbase server
Let us know how it goes.
Cheers
John
http://john-goodwin.blogspot.com/

Init deletion problem...cannot find request

Hi all,
I have a problem with finding the init request. when i activate my chains it asks me to delete the init request. But I cannot find the init request. I use transaction RSRQ to find the request...it takes me to the monitor and shows me that the request it still running. When i click on the init request it gives me the following message....
Object ZPAK_4TNGT3YJGOGOGC8EP1F61EDL9 does not exist in objekt version A for object type InfoPackage (ISIP)
i want to delete this request. How can i do that?
pls advice..
thanks,
wills

Hi,
1. First you should think about why process chain is asking to delete the Init request? It could be possible that you are activating and scheduling the process chain at the same time but you didnt change the update type to delta after doing init for one perticular infopackage.
2. If your Init is not complated yet then first you must complete the Init request then schedule the process chain.
Init deletion could cost a big so be sure that you really dont want it.
Last problem "Object ZPAK_4TNGT3YJGOGOGC8EP1F61EDL9 does not exist in objekt version A for object type InfoPackage (ISIP)" - Looks like this infopackage has been deleted from Bw system.
Let me know if it helps.
Mayank

Error Message in PSE 12. Cannot complete request due to a Program Error

Hi,
I have just bought Photoshop Elements 12 and have checked for updates. All ok. My laptop meets the system requirements. The OS is Windows 7 Home Premium 64-bit. There is stacks of room on the dedicated hard drive I use for Elements. I use a Nikon 7100. When I am editing my RAW images sometimes everything is fine with the edit completed and saved as designed. At other times I do my editing, click on "open image" and I get an error message that my request cannot be completed because of a program error. The only thing I can do to get editing again is to re-start Elements. Sometimes I get the error message at my first edit and at other times on my second, after a successful first save.
I'd be grateful for any ideas as to why I'm getting this message and what I need to do to fix it.
Thanks.
Miceal Zimmer

Well, your info is inadequate/ insufficient/ vague. We need exact info about your system, exact memory and file handling settings, what files you work with, what tools/ features/ functions you use when the errors occur and so on. There's always a specific cause.
Working with your Operating System’s Tools
Mylenium

Error code 28. I cannot find any sensible reference/procedure for Error 28.

My Ipod tells me to connect to I Tunes. After connecting I am told that Itunes will restore my Ipod to Factory Settings. Soon after
I am given Error code 28. Searing the web I cannot find Error 28 and any solution to restoring my Ipod. Has anyone had the same and
what can I do to get my Ipod working again. Help please !!

http://support.apple.com/kb/TS3694#error28
Points to a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

[SOLVED]ld cannot find -l-L/usr/lib -lalleg error

I just installed allegro4 (I know it's outdated but I don't really know much allegro 5 and I need to make a game as a project for school), and everything seems to be working fine. I'm using Code::Blocks. In the Settings->Compiler and Debugger window under the Linker Settings tab I have set
`allegro-config --libs`
When I compile, I get the following error
ld cannot find -l-L/usr/lib -lalleg
I've tried searching for errors similar to this on google but I haven't had much luck.
Last edited by Hurricane (2012-10-18 21:41:38)

axs wrote:It should be -L/usr/lib -lalleg; judging by the message, you have -l"-L/usr/lib -lalleg"
My guess is that you put `allegro-config --libs` where your IDE expects library name while it should go to where IDE expects linker options.
That worked perfectly. Thank you very much.

NO INTEGRATION SERVER, Error while refreshing the XI runtime cache

Hello guys,
I have the following error in an integration scenario of SOAP -> PI -> PROXY.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">BUSINESS_SYSTEM</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>NO INTEGRATION SERVER</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone migth now what could be happening? I already checked The Receiver XI Adapter parameters and everything seems to be rigth.
Thanks for your help,
Regards,
Felipe

Hi,
The error is clearly showing there is cache error.
To resolve this..go to SXI_CACHE tcode and do a delta cache refresh or full cache refresh.
That will solve ur problem
Please award marks if found useful.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from requesting points
SDN PI/XI Forum Moderator
Thanks
Hamja

SAP PI 7.0 INTEGRATION SERVER ERROR

Hi,
When i am working with the Business Systems in SLD PI 7.0 I am unable to see Integration Server. It was displaying INTEGRATION SERVER as NONE. How to connect to the Integration server in SLD.

Hi,
Try these,
1) Create a business system in SLD with role as Integration Server->Give the pipeline URL as that of ur PI i.e http://<host>:<port>/sap/xi/engine/?type=entry
Then assign this as integration server to other business sytem whose roll will Aplication System.
2) In PI -> sxmb_adm-> integration engine configuration-> corresponding integration server maintained or not.
3) In ECC -> sxmb_adm-> integration engine configuration
maintain role of business system as "LOC Application system" and
Corresponding integration server as "dest://<RFC destination for XI>" or
"http://<host>:<port>/sap/xi/engine?type=entry"
4) Cross check the RFC Connection
TCP/IP - LCRSAPRFC & SAPSLDAPI
HTTP Connection to ABAP System.
Regds,
Pinangshuk.

"ALEAUDIT IDoc cannot find request IDoc in Integration Server" error in PI

Similar Messages

Maybe you are looking for