Alert beeps and lots of "trust"

I have already noticed that many users complain here about alert beeps that can't be stopped. That's my complaint, also, but I don't have any of the 10 or 12 reasons that others have found that could cause the beeps. I can't see any pattern for the beeps. They happen with no Safari launched, no iOS device connected and when I am signed out of iCloud. I do not ever use any of the following:
Nimbuzz
FaceTime or other messenger app
Messages
Email notification
Notifications for Safari
Twitter
FaceBook
To avert the occasional reader who loves to reply here with "So what's your question", my question is how to kill the alert beeps other than never use sound.
After the last incidence of an alert sound, I checked Console and noticed 123 entries that contain the word "trust" in less than 30 minutes. Is that about iPhone or just a coincidence (I do also have the perpetual "Trust" nag from connecting iPhone, even when I choose "Trust", but that just puts me in the huge crowd of iPhone users with that annoyance. Here is the System Log for a 28 minute period that had at least one alert sound around 3:50 p.m. (I'm not in your time zone)….
8/30/14 3:25:21.000 PM kernel[0]: process 58813 set trusted
8/30/14 3:25:21.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58813)
8/30/14 3:25:21.000 PM kernel[0]: process 58814 set trusted
8/30/14 3:25:21.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58814)
8/30/14 3:26:21.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 58814)
8/30/14 3:26:21.000 PM kernel[0]: revoking trust for process 58814
8/30/14 3:26:26.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 58813)
8/30/14 3:26:26.000 PM kernel[0]: revoking trust for process 58813
8/30/14 3:27:08.000 PM kernel[0]: process 58835 set trusted
8/30/14 3:27:08.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58835)
8/30/14 3:28:47.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on
(pid 58835)
8/30/14 3:28:47.000 PM kernel[0]: revoking trust for process 58835
8/30/14 3:28:54.000 PM kernel[0]: process 58858 set trusted
8/30/14 3:28:54.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58858)
8/30/14 3:30:06.000 PM kernel[0]: process 58879 set trusted
8/30/14 3:30:06.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58879)
8/30/14 3:30:49.992 PM avguard.bin[52015]: "/Users/jm/Library/Safari/Extensions/YouTube Downloader.safariextz" was not completely scanned (maximum recursion exceeded)
8/30/14 3:30:50.000 PM kernel[0]: process 58904 set trusted
8/30/14 3:30:50.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on syncdefaultsd (pid 58904)
8/30/14 3:30:50.903 PM com.apple.qtkitserver[58905]: Error loading /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType: dlopen(/Library/QuickTime/LiveType.component/Contents/MacOS/LiveType, 262): Library not loaded: /System/Library/PrivateFrameworks/LiveType.framework/Versions/A/LiveType
Referenced from: /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType
Reason: image not found
8/30/14 3:30:50.000 PM kernel[0]: process 58905 set trusted
8/30/14 3:30:50.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on com.apple.qtkits (pid 58905)
8/30/14 3:30:54.000 PM kernel[0]: process 58907 set trusted
8/30/14 3:30:54.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ocspd (pid 58907)
8/30/14 3:31:03.000 PM kernel[0]: process 58910 set trusted
8/30/14 3:31:03.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_ui (pid 58910)
8/30/14 3:31:05.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on �5]"�� T ��7 (pid 58910)
8/30/14 3:31:05.000 PM kernel[0]: revoking trust for process 58910
8/30/14 3:31:52.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 58879)
8/30/14 3:31:52.000 PM kernel[0]: revoking trust for process 58879
8/30/14 3:32:53.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 58904)
8/30/14 3:32:53.000 PM kernel[0]: revoking trust for process 58904
8/30/14 3:37:32.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ��\"�� T ��c�@ (pid 58858)
8/30/14 3:37:32.000 PM kernel[0]: revoking trust for process 58858
8/30/14 3:37:36.000 PM kernel[0]: process 58990 set trusted
8/30/14 3:37:36.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58990)
8/30/14 3:38:46.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ��c �� T ��O�= (pid 58990)
8/30/14 3:38:46.000 PM kernel[0]: revoking trust for process 58990
8/30/14 3:39:54.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on
(pid 58907)
8/30/14 3:39:54.000 PM kernel[0]: revoking trust for process 58907
8/30/14 3:41:03.000 PM kernel[0]: process 59033 set trusted
8/30/14 3:41:03.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_ui (pid 59033)
8/30/14 3:41:04.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on �[--�� (pid 59033)
8/30/14 3:41:04.000 PM kernel[0]: revoking trust for process 59033
8/30/14 3:41:05.000 PM kernel[0]: process 59034 set trusted
8/30/14 3:41:05.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59034)
8/30/14 3:44:17.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59034)
8/30/14 3:44:17.000 PM kernel[0]: revoking trust for process 59034
8/30/14 3:44:48.000 PM kernel[0]: process 59079 set trusted
8/30/14 3:44:48.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59079)
8/30/14 3:45:00.445 PM coreaudiod[162]: Disabled automatic stack shots because audio IO is active
8/30/14 3:45:01.816 PM coreaudiod[162]: Enabled automatic stack shots because audio IO is inactive
8/30/14 3:45:46.000 PM kernel[0]: process 59093 set trusted
8/30/14 3:45:46.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ocspd (pid 59093)
8/30/14 3:45:48.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59079)
8/30/14 3:45:48.000 PM kernel[0]: revoking trust for process 59079
8/30/14 3:45:50.000 PM kernel[0]: process 59096 set trusted
8/30/14 3:45:50.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59096)
8/30/14 3:48:14.661 PM com.apple.qtkitserver[59126]: Error loading /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType: dlopen(/Library/QuickTime/LiveType.component/Contents/MacOS/LiveType, 262): Library not loaded: /System/Library/PrivateFrameworks/LiveType.framework/Versions/A/LiveType
Referenced from: /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType
Reason: image not found
8/30/14 3:48:14.000 PM kernel[0]: process 59126 set trusted
8/30/14 3:48:14.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on com.apple.qtkits (pid 59126)
8/30/14 3:49:28.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59096)
8/30/14 3:49:28.000 PM kernel[0]: revoking trust for process 59096
8/30/14 3:50:00.448 PM coreaudiod[162]: Disabled automatic stack shots because audio IO is active
8/30/14 3:50:01.000 PM kernel[0]: process 59151 set trusted
8/30/14 3:50:01.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59151)
8/30/14 3:50:01.818 PM coreaudiod[162]: Enabled automatic stack shots because audio IO is inactive
8/30/14 3:50:59.987 PM uxipm_loader[59165]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at /Users/_avipm is unavailable. User domains will be volatile.
8/30/14 3:50:59.000 PM kernel[0]: process 59165 set trusted
8/30/14 3:50:59.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_loader (pid 59165)
8/30/14 3:51:00.028 PM lsregister[59166]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at /Users/_avipm is unavailable. User domains will be volatile.
8/30/14 3:51:00.000 PM kernel[0]: process 59167 set trusted
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <59167>):Change trust on avbackendproxy (pid 59167)
8/30/14 3:51:00.000 PM kernel[0]: process 59168 set trusted
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on launchd (pid 59168)
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on �?
8/30/14 3:51:00.000 PM kernel[0]: �� (pid 59165)
8/30/14 3:51:00.000 PM kernel[0]: revoking trust for process 59165
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <59167>):Change trust on дV݁�� (pid 59167)
8/30/14 3:51:00.000 PM kernel[0]: revoking trust for process 59167
8/30/14 3:51:03.000 PM kernel[0]: process 59171 set trusted
8/30/14 3:51:03.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_ui (pid 59171)
8/30/14 3:51:04.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59171)
8/30/14 3:51:04.000 PM kernel[0]: revoking trust for process 59171
8/30/14 3:51:10.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 59168)
8/30/14 3:51:10.000 PM kernel[0]: revoking trust for process 59168
8/30/14 3:53:45.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 59093)
8/30/14 3:53:45.000 PM kernel[0]: revoking trust for process 59093
8/30/14 3:53:46.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 59151)
8/30/14 3:53:46.000 PM kernel[0]: revoking trust for process 59151
8/30/14 3:53:58.000 PM kernel[0]: process 59211 set trusted
8/30/14 3:53:58.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59211)
Please no reply from "Meg St._Clair" who will probably tell me to read the manual for Mac mini and OS 10.8.

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Similar Messages

Qosmio G20 Beeping a lot and dimming screen - why?

Occasionally my Qosmio G20 starts beeping a lot and reducing the brightness on the screen.
This happens while it is running on AC power and with the power option set to highest level.
Simoultanesly there are some blue lights above the keyboard that starts blinking.
The only way to stop this behaviour is to press the key below the blinking blue light, and then go to the control panel an manipulate the power settings. To do that, I have to change the brightness, press apply, restore the brightness and press apply again. After that it may work for a long time before the next incident.
I have the latest Windows updates, I have an anti virus installed, and I have spyware removers installed, so I don't think any of those are to be suspected.
Usually this happens while the PC is playing a movie, but occasionaly it happens while I am playing a game or when I use it for work.
Any help will be appreciated.
regards
Olav

Hi
I would recommend to check the Toshiba power saver.
Select your power mode and check the setup action settings.
Please check the Alarm level settings.
You should take a look also on the basic setup. There you can check the screen brightness.
Please be sure that the unit uses the Toshiba power saver schemes in the Windows power options properties.

When on a call with someone, they hear a beep and I don't. Neither of us have any alerts or messages. What is that? It's extremely frustrating.

i have an 5c and whenever I make a call to one particular person, who owns a iphone5, they hear a beeping noise, but they don't have any messages or alerts. I don't hear this noise and I don't have any alerts or messages either. It's extremely frustrating! And I don't want to spend full retail price on a phone that is malfunctioning or to buy one that will do the same thing. Please help

Well, you say that nobody else hears this beep, and neither do you. It is only this one person that hears this beep on their phone. What makes you think the problem is at your end?

Message alert and other alerts beep more than 3 times in a row. how to fix it.

message alert and other alerts beep more than 3 times in a row. how to fix it.

If they are happening at 2 minute intervals check the Settings>Notifications>Messages>Repeat Alert setting.

IPhone 4s beeps and vibrates but no messages/emails/or missed calls?? How do I find out what just happened?

This is a MAJOR annoyance at 4am.... also, I have noticed that when I open my email for the first time daily, it will suddenly beep and vibrate a few times in a row and my emails are suddenly "updated"...
HOW CAN I TELL WHAT IS GOING ON IN MY PHONE AS FAR AS NOTIFICATION ALERTS? I have looked at everything and nothing seems to be "on" in notifications in the SETTINGS.... help please..
thanks,
very sleepy

ckuan,
Thank you. That was it. Even though I had badges and banner off, I noticed that "Notifications" at the top was still on (in Settings).
Looking forward to a full nights sleep now with no 4am spam to wake me.
thanks again,
EZ

How to coonfigure CCMS Alerts and Alert Categories and Alert Rules

How to Configure CCMS Alerts and Alert Categories and Alert Rules....plz give detail description related to these

Hello Raja,
Can save a lot of your valuable time by telling you only about the events/errors you have to take care of.Here all about the Alert monitoring.Below I am giving the weblogs which are beautifully described about CCMS and mail alerts.
follow the weblogs one-by-one.
I hope at the end of this you may get some knowledge on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar

Error code: sec_error_unknown_issuer while opening Gmail and many other trusted websites!

I tried opening G-Mail and some other trusted website and Got "This Connection is Untrusted" with Error code: sec_error_unknown_issuer.
There is no other button then "Get me out of here".
Date/time are also set right.
I am using Eset Smart Security 7 and Firefox on Windows 8 Single.
I faced this problem just 2 days back just in Firefox. All other Browsers (Chrome, Iron, IE10) are working as Normal.
How do i solve this Problem?
Regards

Thanks a lot Sir.
It worked wonders.

Alert beep upon wake from sleep

Hello,
I seem to have a strange alert beep that occurs when waking from sleep.
It only just appeared after I applied the 10.4.8 software update.
I wouldn't be concerned but today when I booted-up my machine immediately kernal paniced and told me to restart.
It seems independent of what software is open.
I can't seem to find any start-up items that could be to blame.
Any thoughts on trouble shooting this?
Thanks in advance,
Andrew

I just repeated the beep on wake from sleep.
Here is the console system log from before and after the sleep session.
Oct 15 11:44:05 r-r-andrew-nelsons-computer kernel[0]: hibernate image path: /var/vm/sleepimage
Oct 15 11:44:05 r-r-andrew-nelsons-computer kernel[0]: sizeof(IOHibernateImageHeader) == 512
Oct 15 11:44:05 r-r-andrew-nelsons-computer kernel[0]: Opened file /var/vm/sleepimage, size 1073741824, partition base 0xc805000, maxio 400000
Oct 15 11:44:05 r-r-andrew-nelsons-computer kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 3
Oct 15 11:44:05 r-r-andrew-nelsons-computer kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
Oct 15 11:44:08 r-r-andrew-nelsons-computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[75]: exited abnormally: Hangup
Oct 15 11:44:08 r-r-andrew-nelsons-computer configd[34]: posting notification com.apple.system.config.network_change
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: System SafeSleep
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: hibernatepage_listsetall start
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: hibernatepage_listsetall time: 68 ms
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: pages 105739, wire 23101, act 14824, inact 19629, zf 9273, could discard act 19923 inact 18989
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: hibernatepage_listsetall found pageCount 105739
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: IOHibernatePollerOpen(0)
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: writing 105519 pages
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: image1Size 37189120
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: all time: 3605 ms, comp time: 675 ms, deco time: 0 ms,
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: image 114174464, uncompressed 272822272 (66607), compressed 113735084 (41%), sum1 4c777e1e, sum2 e53985f3
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: hibernatewriteimage done(0)
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: sleep
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: Started CPU 01
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Oct 15 12:15:13 r-r-andrew-nelsons-computer kernel[0]: System Wake
Oct 15 12:15:15 r-r-andrew-nelsons-computer lookupd[242]: lookupd (version 369.6) starting - Sun Oct 15 12:15:15 2006
Oct 15 12:15:18 r-r-andrew-nelsons-computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[242]: exited abnormally: Hangup
Oct 15 12:15:18 r-r-andrew-nelsons-computer configd[34]: posting notification com.apple.system.config.network_change
Oct 15 12:15:18 r-r-andrew-nelsons-computer lookupd[249]: lookupd (version 369.6) starting - Sun Oct 15 12:15:18 2006
Any insight would be appreciated.
Cheers
MacBook Pro 15" 1.83GHz, 1G RAM, 80G HD (W8611), XP Home under Parallels Mac OS X (10.4.8) Dell Inspiron 4100 XP Home

Mac Non Stop Alert Beeping on Start up

I have MacMini 2.53 duo core. Os 10.6
1) Last week it started fast Alert sound Beeping non stop after start up. It sounds like the sound made when the keyboard is stuck.
Only after I press the key board did it stop.
Then W key and shift on right stopped working thinking it was keyboard problem..
2) Ran disk utility as target disk and fixed the problem. Booted up still Fast Alert Sound beeping non stop till I press a key on the keyboard.
3)) I took new keyboard plugged it in and same fast Beeping non stop at start up keys worked.
4) Reinstalled new system with 7x delete. Boot up still fast Alert Sound beeping until I hit a key on the key board.
I was wondering if anyone knows how to solve this problem.

I actually Have an Update.
I found out that the computer boots and automatically is pressing the 5 key.
I opened text editor without doing anything else while beeping and number 5 going across the screen in text editor non stop till i hit a keyboard key.

Alert beep every 2 seconds after latest update

Just installed the latest update and after restart there is an alert beep every 2 seconds! Anyone else experiencing this?

Check the RAM in about your Mac, the beep sometimes indicares trouble. Look at the console report and see of RAM is being allocated correctly. POst back with results.
Ray

Alert "beep" sounds repeatedly without prompting

greetings to all...
a recent problem of mine on my iBook G4 1.2GHz. after a period of time on, it will suddenly start sounding the alert beep repeatedly, as if someone was clicking outside an alert box constantly. it's very strange and doesn't stop until i restart the computer (or i can just turn the sound down). the apps i have open are usually safari, itunes, amsn (msn client), word... and that's about it. no hardcore processing.
i'm guessing there's a problem with the soundcard... does anyone have any ideas as to why this might occur?
thanks in advance for your help!

You might try running the Apple Hardware Test. Some beeps may be due to failing RAM. If so, you will get an error code indicating failed RAM. If you have an extra RAM stck, you can repeat the AHT with that one and see if the problem goes away.
Good luck!

IMac gives three beeps and freezes

My neighbour's iMac starts and runs normally most of the time, but periodically when running emits three beeps and then freezes. This is NOT the usual "three beeps at startup" indicating a RAM problem, but whilst the machine is is actually being used.
Can't seem to find anything about this anywhere. Any ideas, anyone?
(The logic board was replaced very soon after purchase as the machine had all sorts of problems . . .)

My imac mid 2010 worked fine with "new" memory for 6 months, then started hanging in mid-session - meaning it froze and beeped loudly hours or days after it booted OK. Put old memory back in and noticed it ran more smoothly with less memory than more. Put the "new" memory back in and ran memtest for days and days; no problems reported. But, the system still froze after I'd been working for a while - at odd times. So, took the "new" memory back to the store, and, while there, upgraded to (more expensive) Crucial brand memory - just to be on the "safer" side. Put the replacement memory in and my imac has never run better - not even when new. So far, my imac is quieter, cooler, and smoother now than since the day I bought it. Thought I'd post this on this old thread because Apple Care had told me to bring the machine to them for three days of testing - per other posts I'd seen on the net. But, that would have been a complete waste of time - since they'd wind up (with the old memory) telling me "no problem," or, (with the "new" memory,) "it's a non-apple part problem." Meanwhile, bad memory can mean bad writes to your hard drive; mine seems fine, but I generally pay close attention to problems and fix them asap, or, sooner. If you wait until you have additional problems, you may spend a lot more time and money getting things finally done - and you may wind up back at "square one" or worse if you trash your drive and it's contents.

Diff b/w alert Categories and configurations

Hi Experts,
Could you please help me here, what is diff b/w Alert Categories and configurations.
Ans also what is the use of Container elements in Categories.
You ans is very helpful for me.
Thanks in Advance all.
Regards,
Madhu.

Hi Madhu,
In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable.
Go through the below doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
Regards,
Krupa

Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it, :(

since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it can anyone help?
Em

Return the iPhone and get your money back. It has been
hacked/modified/jailbroken and likely cannot be made
operative.

Alert beeps and lots of "trust"

Similar Messages

Maybe you are looking for