Alert Configuration for Seeburger Adapter
Dear Team,
I would like to know an information.
For an example,If I use AS2 adapter on the sender side and File on the receiver side,Can we do the Alert Configuration in XI/PI to capture these errors ?
Warm Regards
B.Dheepa
HI
Yes you can use Alert configuration to capture the error from the adapter but the container elements will bring different output as compared to XI adapters.
Thanks
Gaurav
Similar Messages
-
Configuration for JMS Adapter Sensor action and JMS Queue sensor action..!!
Hi,
Id like my BPEL process to send an XML message to JMS on Websphere,I was able to do this through a JMS adapter.But I would more like to add sensors into my process which would really do the same thing - send an XML message to JMS Q.
Now I understand that there are two ways to do this,JMS Queue and JMS Adapter - thorugh bpel sensor action.
I am able to use JMS Queue and it works fine , but adds its own xml tags to the message,Is there any way I could send only my xml payload as a message to the queue??
Also could any1 tell me what is the configuration for JMS Adapter sensor action?
Any suggestions how do I go about it??Hey Anirudh,
Thanx for the response :-)
All these hold good when I have an AQ adaptor right,But the thing is I want to send a message to a 'JMS' queue with out actually using an adapter configuration wizard and everythng..So I resolved to JMS queue Sensor action..Heres the xml snippet from the sensorAction.xml files which is generated..
<actions targetNamespace="http://xmlns.oracle.com/Test_JMS_Logging" xmlns="http://xmlns.oracle.com/bpel/sensor" xmlns:tns="http://xmlns.oracle.com/Test_JMS_Logging" xmlns:pc="http://xmlns.oracle.com/bpel/sensor">
<action name="JMS_LogEntry" publishName="" publishType="JMSQueue" enabled="true" filter="" publishTarget="jms/L_Queue">
<property name="JMSConnectionFactory">jms/L_QueueCF</property>
<sensorName>ActivitySensor_JMS</sensorName>
</action>
</actions>
This works grt and adds messages to the queue..But adds its own header info according to the sensor.xsd loacted at the Oracle_home\bpel\system\xmllib\ folder.
Right now the XML message added to the Queue is:-
<actionData xmlns="http://xmlns.oracle.com/bpel/sensor">
<header>
<sensor sensorName="ActivitySensor_JMS" classname="oracle.tip.pc.services.reports.dca.agents.BpelActivitySensorAgent" kind="activity" target="AddLEntr
y" xmlns:pc="http://xmlns.oracle.com/bpel/sensor" xmlns:ns2="http://www.ulrhome.com/2008/10/L_Entry" xmlns:tns="http://xmlns.oracle.com/Test_JMS">
<activityConfig evalTime="completion">
<variable outputDataType="string" outputNamespace="http://www.w3.org/2001/XMLSchema" target="$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName"/>
</activityConfig>
</sensor>
<instanceId>950016</instanceId>
<processName>Test_JMS</processName>
<processRevision>v2009_04_15__40833</processRevision>
<domain>default</domain>
<timestamp>2009-04-15T11:21:23.596-04:00</timestamp>
<midTierInstance>app01.ulrhome.com:9700</midTierInstance>
</header>
<payload>
<activityData>
<activityType>scope</activityType>
<evalPoint>completion</evalPoint>
<durationInSeconds>0.011</durationInSeconds>
<duration>PT0.011S</duration>
</activityData>
<variableData>
<dataType>12</dataType>
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
<queryName/>
<target>$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName</target>
<updaterName>AddL_Entry</updaterName>
<updaterType>scope</updaterType>
</variableData>
</payload>
</actionData>
My requirement is that I need to add a sensor to the BPEL process which posts 'Only my payload message to the JMS queue'..
What I would want the message in the Queue to be is : -
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
Also while creating a Sensor action I get another option as JMS Adaptor,I am not sure of what value to type in this wizard..Heres what I keyed in..M sure this is not right..Cos it dosnt work :-)
<action name="SensorAction_JMS" publishName="" publishType="JMSAdapter" enabled="true" filter="" publishTarget="jms/LoggingQueue">
<property name="JMSConnectionName">Log</property>
</action>
</actions>
Could any 1 tel me what values are the right values..And does JMS Adapter mean that I have to create a JMS Apator in the project and give that connection name as a Value..
I am not finding sufficiant Documentation for 'JMS Adapter' so M clueless and right now any help will be appriciated :-)
Regards,
Akshatha. -
Problem with CCMS PI7.1 alert configuration for RWB Alert count
Hi,
We have configured CCMS alert for PI7.1 RWB failure count. Alert is getting triggered only one time and after that no alerts. I can see the change in data but alert is not getting triggered. If I complete the alert then immediately in next run a new alert is generated with last reported data and then again there will be no alert going forward. Data is collected but no alert is triggered. Does anyone know the reason for this and how to fix it? Please help.
Thanks,
Kavitha Rajan.Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan. -
Hi ALL,
I have been posting quiet a few questions on SDN regarding SEEBURGER Adapter, But I don't seem to be getting much help in SDN. I understand there is not much information avaiable on net about SEEBURGER Adapter. Is anyone aware of any forum dedicated for SEEBURGER Adapter?
Regards,
XIerHi Xler
<b>pls go through these links for more information on SEEBURGER Adapter</b>
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Please see this threads for some more information on this:
Seeburger AS2 Adapter
Seeburger
have a look also on these URl's
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
Thanks
Pls reward if useful -
Login Module configuration for soap adapter ?
Hi Guys,
I have configured XISOAPAdapter for client certificate Authentication and i have created 1443 as the HTTPS port on the ABAP stack and defined this port in the instance profile.
Under SSL provider i have selected 50101 as the HTTPS port and the user mapping to the certificate works fine and i was able to login directly.
https://host:50101/XISOAPAdapter/MessageServlet - I was able to login with the user mapping to certifcate.
but when i try https://host:1443/XISOAPAdapter/MessageServlet - it is asking for the basic password authentication and the automatic login with the certifcate is not working. Our customer will be using this url to send messages to soap adapter.
under policy configurations for XISOAPAdapter, i have defined only clientcertificateloginmodule and define the rule as Rule1.getUserFrom=wholecert.
any help or suggestions would be appreciated.
Thanks,
SriniHi,
We also experienced that limitation when a vendor is connecting to our XI SOAP Sender Adapter. It is asking for basic username/password. What we did was to create a Generic XI user with a password on it and use SSL authentication at the same time. Our Scenario was PI --> XI --> SAP R3, with the PI system using an HTTP RFC destination with a Basic Logon and Active SSL option to connect to the same system as yours https://host:portnumber/XISOAPAdapter/MessageServlet
Let me know if this helped...
Regards, -
How to configure SFTP seeburger adapter
Hi All,
Has anyone worked with Seeburger adapter? Could someone tell me how to configure it in XI ?
XIerHi XIer,
Check out the following links
http://www.seeburger.com/sftp_xi/
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Best Regards,
Guza
Message was edited by:
liad aharoni -
SRM alert configurations for SUS ASN not created in SRM SUS system
Hi All,
We are trying to configure the SRM ASN alerts with the alert category SRM_SUS_AVIS ( Alerts for ASN-SUS) by the same way we did for the SRM_BID_INV for bidinvitation in different client and scenario.
Is the configuration for SUS anyway different than EBP? ( I have posted another thread for bid alert doubt and later it was configured and working fine sometime ago)
If the config for SUS ASN alert is different then what is that?
With our configurations in SLAERT and ALRTCATDEF, and thru RSALERTTEST job we are getting alerts for PO not viewed and Order confirmation not created.
But we are not able to get alerts for ASN not created.
Can anyone throw some light on this please?
Best regards,
SridharVendor data is maintained in table CRMD_PARTNER only when transactional documents exist for the vendor.
-
Dynamic port configured for FILE adapter is not working
Hi,
I have a simple dynamic port in an orchestration that writes a file to a file location. Here is the configuration
================
FilePort(Microsoft.XLANGs.BaseTypes.Address) = "FILE://c:\\TestFolder\\Out";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "FILE";
================
When I run this orchestration, the dynamic port does not write the file to the folder, however I does not show any error either. It is always in "Ready to Run" state where the message is "Queued Awaiting".
I tried all sorts of combinations like FILE:// FILE:\\ File: file:// file:\\ etc... and also without the moniker, just c:\.... I get the same problem.
when I use a static port(subscribed to the same message) it works fine. When I use a static port ALONGWITH this dynamic port then both works fine !!! I receive 2 files.
but when I use only dynamic port it does not work!!
Anybody knows how to solve it.
THANKS IN AVANCE
PLEASE HELP
SuryaIt could be becasue you 're not passing in the file name, Try something like this..
SndPort_Dynamic(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\Test1.xml";
But even when you don't pass the file name, i was expecting the erro to be like:
The FILE send adapter cannot open file C:\TestFolder\Out\ for writing.
Details: The system cannot find the path specified.
But try with File Name and restart the host instance after the change.
Or use somehting like this:
FilePort(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\\%MessageID%.xml";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "File";
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful. -
Alert Configuration for File to IDoc scenario
I have followed Alerts : Step-by-Step /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
and configured Alerts for file to IDoc scenario.
But the problem is, I did not notice any alerts being generated. I could notice the IDocs being posted to destination system. So I was going through Alerts-Troubleshoute Guide. In intension to maintain monitoring level, I clicked Configuration tab. But I did not notice my sender and receiver system there to maintain.
Can any body help me to detail out the procedure to add sender and receiver systems to maintain the monitoring level?
Regards,
Suraj Kumarhi Suraj,
WHich SP version are you on??
If you are on Sp14 or above, then unfortunately, Michal's Trouble Shooting for Alerts will not help.
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note <b>870232</b> for this info.
Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
If this is working fine, then the last step, implement the note 913858.
Regards,
Bhavesh -
XSLT Mapping with Dynamic Configuration for Mail Adapter
Hi Guys,
I am wondering if somebody can help me please.
I have a requirement in which I need to pick up the file from FTP and email it to the user as an attachment with the same file name and content.
I know it is possible via 3 method either by deploying adapter module or via XSLT or JAVA Mapping.
I preferred XSLT Mapping because it is easier to use and we don't need to compile the code like JAVA Mapping.
I have done the XSLT Mapping but the only problem I am facing is that how to copy the file name which we get it from Dynamic Configuration to the Mail ContentDisposition.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">
<!-- change dynamic configuration -->
<xsl:variable name="dynamic-conf"
select="map:get($inputparam, 'DynamicConfiguration')" />
<xsl:variable name="dynamic-key"
select="key:create('http://sap.com/xi/XI/System/File', 'FileName')" />
<xsl:variable name="dynamic-value"
select="dyn:get($dynamic-conf, $dynamic-key)" />
<xsl:variable name="dummy"
select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />
<!-- copy payload -->
I tried many option but unfortunately none of them worked.
<Content_Disposition>attachment;filename="$inputparam"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-conf"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-key"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-value"</Content_Disposition>
<Content_Disposition>attachment;filename="$dummy"</Content_Disposition>
<Content_Disposition>
attachment;filename=
<xsl:value-of select="dynamic-key"/>
</Content_Disposition>
I really appreciate if someone can please provide some guidance.
Thanks,Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu -
Configuration for ftp adapter in soa11g
hi,
I am new in soa11g,can anyone help me for how to configure ftp adapter in console, to use ftp adapter.
thanx and regards
prashant
Edited by: 857480 on 10-May-2011 02:55thanxs,
but now i am getting exception like
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ftpDemo:put [ Put_ptt::Put(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/Ftp/PrashantFtp'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/Ftp/PrashantFtp. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
plz help.
regards
prashant -
How to configure for GPlus Adapter with SAP Phone and SAP CRM
Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
GovindaHi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen -
HTTPS configuration for SOAP adapter
Hi,
We have a requirement where we need to send the request to the target URL with https protocol.
We have raised a request to configure the XI server for HTTPS.
HTTPS has been configured on both ABAP stack and J2EE stack.
But we could not find the HTTPS option in the drop down list of transport protocol in receiver Soap adapter.
For this do we need to do any setting changes on the XI server after the configuration?
Thanks,
Jyothsna .Hi,
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
Please go through below link for referance (above information is from below link)
Step by step guide for SSL security
step by step guide to implement SSL
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Regarding message level you can encrypt the message using certificates.
For both of this basis team has to deploy the releavant certificates in XI ABAP Stack or Java stack.
Generally if the scenarios are intra company we dont use any transport level or message level security since the network is already secured.
Check the following links.. you will get the information all about the securities...
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/content.htm
Also read thru this link for message level security - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Also find soeminformation in these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
/people/aparna.chaganti2/blog/2007/01/23/how-xml-encryption-can-be-done-using-web-services-security-in-sap-netweaver-xi
Thanks
Swarup -
ALERT MAIL FOR FILE ADAPTER COMMUNICATION CHANNEL ERRORS
Hi,
I need to send an alert by mail to a list of configured receivers if any error( Application as wel as System Errors ) occurs in the FILE ADAPTER Communication Channel .
Please suggest how to do it......
Regards,
SriparnaCan anything be configured in the communication channel to run a mail unix script if the communication channel is throwing
error.Other than alert rule can we configure this.
Why do you intend to use script? Define Alert....create Rule....set parameters using SCOT.....you will get the alert as email (if you need it)
Can you please help with how do I create this rule specific to File Adapters only ?
Other than selecting FILE as Adapter Type in RWB --> Alert Rule definition we dont do anything special....this setting should help.
Regards,
Abhishek. -
Earlywatch Alert configuration for Java system
Hi All,
I have configured the Solution manager diagnostics for early watch
alerts for a java system by following the guide "EWA for non-ABAP
components" in note 976054.
I am able to get the EWA reports manually, i.e by downloading
the "service download" file from http://<host-name>:<port>/smd/services
and uploading it in T-code DSA in Solution manager system and by
generating the "word" file over there. But i require the automatic
configuration to work. This automatic reports generation is not working presently.
Is there any separate configuration to be done for the automatic report
generation for Non-ABAP systems.
Waiting for any one of your help,
Points will be awarded for any useful solutions.
Regards,
Phani.Hi,
Normally you have nothig to do, the report should be generated each week automatically. But you have some checks in document attached to <b>SAP Note 976054</b> to see if everything is activated (SDCCN, NONE Destination, etc...).
Regards,
Stephan
Maybe you are looking for
-
GL Line Item Display vs. Vendor Line Item Display
Hi Gurus, I have parked a document with a vendor line item. When generating standrd GL line item reports (FBL3N or S_ALR_87012282), the line items for my parked document are not displayed. But if I generate the vendor line item report (FBL1N), this p
-
ME_PROCESS_PO_CUST allows save in ME21n - error message triggered
All, Purchase order is getting saved even though there are error messages triggered via BADI in the POST method. I've tried both: MMPUR_MESSAGE_FORCED 'A' 'ME' '303' TEXT-001 '' '' '' . MMPUR_MESSAGE_FORCED 'E' 'ME' '303' TEXT-001 '' '' '' . Still th
-
Low Disk Space in the installation drive
Dear all, One of our test server, is running out of space in the installation drive. Do we have any standard jobs/Tcodes to reduce/shrink the disk space of installation drive. Please share your inputs, Regards, Younus
-
Exchange 2010 - visibility of items in Public Folders
Hello all, I already posted this question to the German Exchange 2010 forum, but have not gotten an answer yet. So I hope to be more lucky in the English forum. Environment: Exchange 2010 SP3 RU4, 2 replicas for Public Folders, Outlook 2007 cache Mod
-
Regarding Error: No Authorization for Graphic Access (BDS)
Hi, When I try to view the print preview of a form, I am getting the following error message: No Authorization for Graphic Access (BDS) Please help me resolve the issue. Thanks, Sai.