Alert data collection process unable to write data to the Data Warehouse
Alert data collection process unable to write data to the
Data Warehouse. Failed to store data in the Data Warehouse. The operation will
be retried.
Exception 'InvalidOperationException': The given value of type
String from the data source cannot be converted to type nvarchar of the
specified target column.
One or more workflows were affected by this.
Workflow name:
Microsoft.SystemCenter.DataWarehouse.CollectAlertData
Instance name: Data
Warehouse Synchronization Service
Instance ID:
{9A0B3744-A559-3080-EA82-D22638DAC93D}
Management group: SCOMMG
Can anybody Help?
About 24 hours ago, one of my four management servers began generating this error every 10 minutes; we only upgraded to SCOM 2012 R2 a couple weeks ago, I have NOT installed UR1. No new management packs or database changes have been made within the
last week; KB945946 is not related to this. An Event ID 11411 warning started occurring around the same time as this started and repeats every 10 minutes, too:
Alert subscription data source module encountered alert subscriptions that were waiting for a long time to receive an acknowledgement.
Alert subscription ruleid, Alert subscription query low watermark, Alert subscription query high watermark:
5fcdbf15-4f5b-29db-ffdc-f2088a0f33b7,03/27/2014 00:01:39, 03/27/2014 20:30:00
Performance on the Data Warehouse database server seems fine; CPU, memory and disk I/O are good.
How can we identify where the problem is?
Similar Messages
-
Event data collection process unable to write data to the Data Warehouse
Alert Description:
Event data collection process unable to write data to the Data Warehouse. Failed to store data in the Data Warehouse. The operation will be retried.
Exception 'InvalidOperationException': The given value of type Int32 from the data source cannot be converted to type tinyint of the specified target column.
Running SCOM 2007 R2 on Server 2008 R2 with SQL Server 2008 R2. I can only find a single reference to this exact error on the Internet. It started occurring on a weekend. No changes were made to the SCOM server directly before this occurred. Anyone know
what the error means and/or how to fix?Hello,
I would suggest the following threas for your reference:
Troubles with DataWarehouse database
http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/5e7005ae-d5d8-4b5c-a51c-740634e3da4e
Data Warehouse configuration synchronization process failed
to read state
http://social.technet.microsoft.com/Forums/en-US/systemcenter/thread/8ea1f4b9-115b-43cd-b66f-617533703047
Thanks,
Yog Li
TechNet Community Support -
TS4002 Unable to write anything into the incoming mail server space.
Suddenly I was unable to recive or send incoming mail.
Unable to enter anaything into the incoming mail server space.
Internet is working....just not email.Could I ask you to amend your signature - you can see why it's a good idea.
The first step for you would be to sign out in System Preferences>iCloud then sign back in again, enabling Mail and any other data types in the checklist there. This should set up Mail automatically for you - you shouldn't need to enter any settings yourself.
Your data will disappear from your Mac when you sign out, but will reappear when you sign back in. -
Data warehouse monitor initial state data synchronization process failed to write state.
Data Warehouse monitor initial state data synchronization process failed to write state to the Data Warehouse database. Failed to store synchronization process state information in the Data Warehouse database. The operation will be retried.
Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.MonitorInitialState
Instance name: Data Warehouse Synchronization Service
Instance ID: {0FFB4A13-67B7-244A-4396-B1E6F3EB96E5}
Management group: SCOM2012R2BIZ
Could you please help me out of the issue?Hi,
It seems like that you are encountering event 31552, you may check operation manager event logs for more information regarding to this issue.
There can be many causes of getting this 31552 event, such as:
A sudden flood (or excessive sustained amounts) of data to the warehouse that is causing aggregations to fail moving forward.
The Exchange 2010 MP is imported into an environment with lots of statechanges happening.
Excessively large ManagedEntityProperty tables causing maintenance to fail because it cannot be parsed quickly enough in the time allotted.
Too much data in the warehouse staging tables which was not processed due to an issue and is now too much to be processed at one time.
Please go through the links below to get more information about troubleshooting this issue:
The 31552 event, or “why is my data warehouse server consuming so much CPU?”
http://blogs.technet.com/b/kevinholman/archive/2010/08/30/the-31552-event-or-why-is-my-data-warehouse-server-consuming-so-much-cpu.aspx
FIX: Failed to store data in the Data Warehouse due to a Exception ‘SqlException': Timeout expired.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Collection Processes in Process Chains
Hi ALL,
I want to know what is the real importance of using AND, OR and EXOR Processes in Process Chains.I have gone through all the material available on SDN.But i could not clearly understand these Processes as of what's the real purpose it serves when used in Process chains.
We have Process Chains in our system which contains Planned data as well as Actual data which are parallelly loaded using our Process Chains.Where in we have Different infopackages.With every infopackage,If it is successful ,it is connected to AND Process And in case,if it is a failure,It is connected to an OR Process.
So ,if it is Successful ,then it goes to And Process or else it connected to OR Process which triggers an ERROR event for that particular process chain.
So,Please Do Provide an good answer as I have to implement certain changes to my process chains.I have added 3 more infopackages to my process chain and now ,I want to know whether I should connect them to OR process,if a Failure occurs and what will be the consequences ,if I connect/Do not these new packages to OR process when a failure occurs.
I hope you understand this Problem and <b>reply as it is very urgent.</b>
Points will be assigned.
Regards,
samirHi
Definition
A collection process collects several chain strings to form one string in the process chain maintenance.
Use
Process chain management handles collection processes in a particular way. The system makes the variant names consistent and guarantees that all processes of the same name that have been scheduled more than once, trigger the same event. This enables the several chain strings to be collected to form one and also makes multiple-scheduling of the actual application processes unnecessary.
The following collection processes are available in the process chain maintenance:
And Process (Last)
This process does not start before all events of the predecessor processes, that is including the last event, that it has waited for, have been successfully triggered.
Use this collection process when you want to combine processes and when further processing is dependent on all these predecessors.
Or Process (Every)
The application process starts every time a predecessor process event has been successfully triggered.
Use this collection process when you want to avoid multi-scheduling the actual application process.
XOR Process (First)
The application process starts when the first event in one of the predecessor processes has been successfully triggered .
Use this collection process when you want to process processes in parallel and schedule further independent processes after these ones.
Owing to the time components, the collection processes do not display logical gates in the normal sense, because the system cannot distinguish between whether a 0 entry (no event received), means that the event was never received or whether it has not been received yet. The reason for this is that the checks do not run continuously but only take place when the event is received. -
[Solved] CUPS: Unable to write print data: Input/output error
I'm filling this for the benefit of those poor googlers that can reach here.
Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
State Idle
but printers.conf had:
State Stopped
StateMessage Unable to write print data: Input/output error
Reason paused
Probably due to the ErrorPolicy being stop-printer.
So seeing I followed the following steps:
Stop cups
Replace printers.conf with printers.conf.O (I could also had manually edited it)
Start cups
It then went working flawlessly.
There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).I think that I had this same problem, and fixed it by reinstalling the printer. Thank you for your post.
-
File manager unable to write data on USB/mem card
After updated to Android 4.4, I am unable to write data on USB pendrive or on memory card( only inbuilt app - File commander can write data on memory card but not on USB pen drive).
With file commander, I can read SD card and Micro USB pen drive( which means I can copy data from SD card and Micro USB pen drive to phone memory).
But with File commander, I can write data on SD card( which means I can create folders and copy data to SD card) but not on Micro USB Pen drive.
If any body has solution to that write restriction on micro USB pen drive, please tell ????????
Upto Android 4.3 I can write on SD card and micro USB pen drive with any file manager app.
But with 4.4, I can write only on SD card with only In build file commander app, but not on micro USB pen drive.
Solved!
Go to Solution.http://talk.sonymobile.com/t5/Xperia-Z-Ultra/What-changed-in-Android-4-4-KitKat-with-SD-cards/m-p/63...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Unable to write data into excel file when it's close
Hi,
I'm facing this problem and it's a bit weird. I'm using the following method to insert data into excel file. But when excel file is close, it unable to write data into the excel sheet. But it was able to write the data into the excel sheet if i open the excel file when running the program.
Can anyone please tell me what's wrong to the code?
public int updateLog(String sheet, String no, String cpId, String CatId, String rbtCode, String rbt, String rbtName, String artistName, String price, String rbtFileName, String songId, String msg){
int result = -1;
try{
SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss",Locale.ENGLISH);
String actionDate = formatter.format(new Date());
rbtName = rbtName.replaceAll("'", "''");
artistName = artistName.replaceAll("'", "");
String sql = "insert into [Sheet3$] (Code, CpID, CategoryID, RBTCode, RBT, RBTName, ArtistName, Price, RBTFileName, SongID, UploadStatus, FileUploadedDateTime) ";
sql = sql + " values ('" + no + "', '" + cpId + "', '" + CatId + "', '" + rbtCode + "', '" + rbt + "', '" + rbtName + "', '" + artistName + "', '" + price + "', '" + rbtFileName + "', '" + songId + "', '" + msg + "', '" + actionDate + "')";
System.out.println(sql);
log.writeLog(sql);
result = stmnt.executeUpdate(sql);
} catch(Exception e){
e.printStackTrace();
log.printStackTrace(e);
return result;
public int openConnection(){
int result = -1;
try{
Class.forName(dbDriver);
c = DriverManager.getConnection(conStr + excelFilePath+";ReadOnly=0;");
stmnt = c.createStatement();
} catch(Exception e){
e.printStackTrace();
log.printStackTrace(e);
return -1;
return 1;
}ThanksHI,
i hv a doubt regarding reading / opening of a
password protected Excel file using jxl( java ) .
How to read / open a password protected Excel file
thro Java (jxl ) program .plz let me know some
example also .
Regards,
Ramesh P
845935822cross posting !! answered here
http://forum.java.sun.com/thread.jspa?threadID=710466&messageID=9507085#9507085 -
Collective processing of g/l master data
HI..
We have a requirement to change the data in COA segment and Company code segment /names of several g/l a/cs at the same time .I know the option to change thru FS00 (fs02)only for one g/l at a time.
Any one tell me how to do collective processing?
regards
Moderator: Please, post in relevant forums and avoid asking basic questionsHI..
thanks for ur immediate reply. -
Data warehouse Loader did not write the data
Hi,
I need to know which products are the most searched, I know the tables responsible for storing this information
and are ARF_QUERY ARF_QUESTION. I already have the Data Warehouse module loader running, if anyone knows
why the data warehouse loader did not write the data in the database, I thank you.
Thank.I have configured the DataWarehouse Loader and its components.Even I have enabled the logging mechanism.
I can manually pass the log files into queue and then populate the data into Data Warehouse database through scheduling.
The log file data is populated into this queue through JMS message processing" and should be automated.I am unable to
configure this.
Which method is responsible for adding the log file data into loader queue and how to automate this. -
Unable to connect to Data Warehouse Server
I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!These are the types of errors I am getting in the Event Logs:
Log Name: Operations Manager
Source: Console Operations
Date: 4/22/2014 11:18:53 AM
Event ID: 33569
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: IS-V004.CH.ElSegundo.org
Description:
Cannot connect to SQL Reporting Services Server. Message= Cannot display reporting wunderbar because the information is not yet available in DW CMDB. Remediation = Please wait for MP sync process to finish and try again later.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Console Operations" />
<EventID Qualifiers="49152">33569</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-22T18:18:53.000000000Z" />
<EventRecordID>71</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>IS-V004.CH.ElSegundo.org</Computer>
<Security />
</System>
<EventData>
<Data>Cannot display reporting wunderbar because the information is not yet available in DW CMDB.</Data>
<Data>Please wait for MP sync process to finish and try again later.</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: Console Operations
Date: 4/22/2014 11:18:42 AM
Event ID: 33569
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: IS-V004.CH.ElSegundo.org
Description:
Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Console Operations" />
<EventID Qualifiers="49152">33569</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-22T18:18:42.000000000Z" />
<EventRecordID>68</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>IS-V004.CH.ElSegundo.org</Computer>
<Security />
</System>
<EventData>
<Data>An unexpected error occured while connecting to SQL Reporting Services server: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup()</Data>
<Data>Please contact your Administrator.</Data>
</EventData>
</Event> -
Job for alert data reorganisation is not release or running -ERROR BPM
Hi
I am trying to set up BPM in solution manager EHP1 .
I ahve created a business process and also added teh required job,When i try to generate and activate the BPM i get an error as
"Job for alert data reorganisation is not release or running"
kindly suggest what i need to do to resolve this issue, which job to be scheduled and also all details and also any relevant document for the same
i have a project dead line to be met kindly help me ASAP
Thanks
MichaelHi Michael
Was it show red alert ?
Do you still get same alert if you generate and activate
the BPMon session ?
If yes, there seems some problem on job "BPM_ALERT_REORG".
Maybe it is scheduled but not released.
(do you see scheduled job in SM37 ?)
1st, according to your description, you use ehp1.
In that case, as described in note 521820, do you already have
required note. Especially related to ST-SER like following.
1273127
1275225
1298310
1319473
1332197
1355132
1390111
I quickly checked description of each note, but could not find out
correction related to alert reorganization job. But it is better to
implement above notes if you do not have yet.
And if you still have problem (try generation and activation again)
even with above note, I recommend you to create SAP customer message
for component "SV-SMG-MON-BPM".
Best Regards
Keiji -
Management Data Warehouse Data Collection fails due to login failure
Hello,
I am trying to set up a Management Data Warehouse on a server other than the one I want statistics of. Unfortunately, each upload fails because the data collector upload job cannot log onto the warehouse server. For some inexplicable reason the process is trying to log on using domain\serverName. Obviously no such user exists, and the process fails. Below is the error message I see in the logs:
Description: An error occurred with the following error message: "An error occurred while verifying the result set schema against the output table schema. The data collector cannot connect to the management data warehouse. : Login failed for user 'domain\server name$'.".
Any help would be greatly appreciated.
Thanks,
Zacharyhttp://technet.microsoft.com/en-us/library/bb677211.aspx says
The data warehouse is installed on a different computer from the data collector. Probable causes are network connectivity problems or an unavailable host server. This error only affects upload packages.
Handling: Because there is no advance notification about a server shutdown, this error cannot be anticipated and handled automatically. The error is logged and after a brief interval, the upload is restarted. After four unsuccessful upload attempts, the collection set is disabled and its state is written to the execution log.
Note:
Any data that is collected while the collection set is running is kept and accumulated. If the upload package can connect to the data warehouse, the accumulated data is uploaded.
Blog: http://dineshasanka.spaces.live.com -
Unable to create or update the Excel Personal data provider in Web Rich
Hi All,
Iam getting the below error message ,when iam using Excel as personal data provider in WEBI Rich Client.
"Unable to create or update the Excel Personal data provider in Web Rich Client Cannot open the workbook WIS:10872"
Please suggest a solution ,it helps a lot..
Regards
MaheshHi,
Was this issue resolved? I see this post has been marked answered but there wasn't any information on what it took to resolve the issue.
We have our CMS and processing servers on Linux while our Scheduling servers are on Windows. The WEBI reports with external data providers fail to run on Infoview/ scheduler.
We were told this is addressed in FP 3.6 but that is not the case. We installed FP 3.6 but still continue to see these errors. It required us to manually deploy the ExtensionFactoryService package for enabling the refresh of such reports on infoview/schedulers. It also involves placing of the file used [.xls/.txt] on the linux server on the PersonalDPFiles directory.
No luck so far!!!
Any help would be greatly appreciated!
Thanks
Avinash -
Reporting agent in BW 3.0b- Job log message is-No alert data found
Hi,
I am using reporting agent in BW 3.0b to send and alert email to the user.
There is a query in which I have used one restricted key figure to calculate the exception. I am able to display this in the report. In Bex analyzer I am getting the value.
But When I schedule the package for Reporting agent I am getting in the job log as " No alert data has been found".
I searched sdn before posting and did not get proper solution for this.
Could you please let me know the use of expception in Reporting agent in BW 3.0b. Do I need to write any user exit for this???
Reards,
RaghuHi,
You can define threshold values (exceptions) for a query. Data that varies from these thresholds is highlighted in color or marked with icons. You can use these exceptions to identify deviations from expected results at a glance.
Defining and Changing Exceptions
1. In the Exceptions screen area, choose New Exception in the context menu. An entry with the default text Exception <Number> appears and you can edit the description directly.
2.In the context menu, choose Edit. The exception editor appears; it displays the relevant parts for the definition on tab pages.
You can also call the exception editor from the Properties screen area by choosing the Edit pushbutton.
3. Make the required settings for the definition of the exception. For more information, see Definition of Exceptions.
4. Choose OK. You return to the query definition.
5. Choose Save Query.
Removing Exceptions from Queries
1. In the Exceptions screen area, select the relevant exception and choose Remove in the context menu.
2. Choose Save Query.
Result
You have defined or changed an exception for a query. Execute the query. The exception is evaluated online. The cell areas that are affected by the exception appear highlighted in the appropriate color or, where applicable, with icons in Web applications.
You can display the exception descriptions and activate or deactivate the exceptions you want.
For more info go through the below link
http://help.sap.com/saphelp_nw70/helpdata/en/68/253239bd1fa74ee10000000a114084/frameset.htm
Regards,
Marasa.
Maybe you are looking for
-
Can read TEDS in MAX but not with DAQmx VIs
Hi, I have a cdaq 9181 with a 9234 accelerometer module. I have 3 teds equipped accelerometers connected to ai0, ai1, and ai2 repectively. In MAX, when I reserve the chassis I can read all three teds, no errors. When I do the same thing in labview
-
PLS-00123: program too large on 9i with 4200-lines-trigger
Just ran into another problem: I work with Oracle 9i. I have a trigger with 4123 lines of code. And I get PLS-00123 when I try to create the trigger. I've read that since Oracle 8.x (I can't remember the exact version) a program can have up to 6 mio
-
NEW SONGS NOT SHOWING IN ITUNES 11 LIBRARY
No new songs that i import are showing up in my iTunes Library!!!!! HOWEVER, I can view them in a playlist if I drag and drop them there from my desktop. I don't understand why apple have to constantly keep updating and changing things that work perf
-
Copying a texture into a layer mask... how?
This question has been plaguing me for years and I thought I'd come and finally scratch that itch once and for all. See this image? http://fc05.deviantart.net/fs42/f/2009/072/7/0/Grunge_Texture_by_skeelar_stock.jpg Say I want to use it as an opacity
-
Retrieve raw captured data after report generation crash
Hi everyone Yesterday we were performing load tests on a server. During which I created and I scheduled a User defined data collector set based on the system performance collector set. The data capture ran for 2 hours. It then proceeded with the proc