Alert in crm when the order is changed in ecc

HI All,
When an ECC order is changed/cancelled then an alert should be generated in the alert inbox of the crm user. Please suggest if such a scenario is possible. We dont have XI in place.
In such scenarios can we have the alert category defined in the ECC system and the alert triggered from CRM system by pointing the rfc connection in SALRT1 to crm system.
Please suggest.

Hey
Please open this question in ECC forum since this is not part of XI.
To answer your question,you should be able to achieve this by configuring CCMS on ECC or on Solution manager.
Thanks
Aamir

Similar Messages

In Aperature, how do you keep photos in the order you changed them to while editing? When you go to burn them to a disk, the order changes from what you see on the screen.

I need to know how to save my photos to a disk for a client in the order I changed them while working on them. I photographed a party with another photographer and joined both photographers photos. Now I want to keep them in the order the event took place and how I rearranged them.

The exported photos will show on the disk like any sequence of files, sorted by date, name, filetype, etc. To help your client to sort them according to your sequence, rename the files and append a sequence number. You can rename them on export by using an export preset, for example the name format "Custom name with index". That will append a number to the filename, according to the position in the album you are exporting.

How do I quickly update the ActiveX automation references in my VIs when the ActiveX interface changes?

Hello all,
I joined a test automation team in the middle of a large project and
inherited a huge set of VIs (over 700) and associated architecture for
this automation (not to mention the several thousand TestStand
sequences). Another part of the project is being developed by our
customer, who is using VB 6.0 to create ActiveX components which we
need to use in LabView to access their hardware. They've already
invested a large amount of time developing these ActiveX components,
and they are not finished -- meaning the ActiveX interfaces will be
changing. Every time they send updated ActiveX components, I have to
re-write many, many VIs including updating a couple strict typdefs.
This process takes way too much time and is mind-numbing and prone to
error or omission.
Unfortunately I can't post any of the VIs because of a NDA. But
perhaps a bit more detailed explanation would help. TestStand calls a
VI to open and get an ActiveX reference for automation (which it stores
in a variant). It will pass this reference into any VI it calls to
perform specific functions through this ActiveX interface. For
example, one VI that may be called passes this automation refnum into
another, which passes it to another, which passes it into another to
get the actual ActiveX reference stored in that variant (through a
Variant To Data call with a strict typedef of the ActiveX component
wired to the type input). [See the attached image of this sample VI
hierarchy: the far left icon would represent TestStand, and the far
right is the strict typedef.] Any of the VIs in the chain might use
ActiveX Property or Invoke nodes, and it can break at any one of those
when the ActiveX component changes. It's easy to fix each one, but
since there are so many VIs it takes a very long time.
Is there any way at all to do a massive search/replace or something to
make the ActiveX references update? I realise that even though
property or method names stay the same from one version to the next,
they are different references. Is there a way to update these based on
name if you give it the base ActiveX reference?
Thanks in advance for any help!
Tom Williams
Attachments:
hierarchy.GIF ‏6 KB

Ben,
Unfortunately I can't post any VIs that would demonstrate the problem
because the ActiveX components are confidential. I'll try to develop
my own ActiveX dll that will demonstrate it, but in the meantime, in
hopes that another picture will help, I've attached an image of a block
diagram (with some names changed to protect confidential information)
of one of the lower level VIs from the hierarchy I posted. In this
example, the "Automation Refnum IN" is an input with a type definition
linked to the strict typedef based on the ActiveX automation dll that
has changed. I updated that typedef, but as you can see the output to
the "Class1" indicator is broken. If I delete the "Class1" indicator
and select Create->Indicator from the Class1 property node, and then
wire the new "Class1" indicator to the connector pane, the VI is fixed
-- at least at compile time. In most cases there is also a runtime
problem where the reference obtained by one of the intermediate
property nodes is null, so the property or method node that uses it
fails (e.g. "_VNManager.Networks" property returned is 0, so the
"_Networks.Network1" property node fails). To fix this problem, I have
to delete the wires between the property nodes, and one by one select a
different property/method, then select the correct property/method and
re-wire. There seems to be a bit of "jiggling the handle" to get it to
work though.
I don't know if the ActiveX developer changed anything in this class,
but if he did, he didn't change the name of this class. I would like
to have to modify the VI only if a class, property or method has
changed name or been removed.
Does that all make sense? Thanks for any pointers or help!
Tom
Attachments:
Class1_Path.GIF ‏7 KB

How to find the when the password is changed for a system User

Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan K

Vijayaraghavan Krishnan wrote:
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KThe only way to implement an Oracle Audit

I want the system automatic update my UDFs when the OnHand was changed.

I added two UDFs in table OITW to count the warehouse OnHand by CASES and Bottles. I want the system automatic update my UDFs when the OnHand was changed. Is there any way I can do it in database level instead in the application (too much places involved).

There is few ways how to do this:
- triger as David said, but I dont recomend it through SAP policy
- in stored procedure transaction notification by adding or updating document update your user field
- create job in SQL server which in specific interval recalculate the changes of onhand and update your user defined field
- create addon which will be over functiuonalities which may change the onhand value
I think that from SAP is possible only Addon, but the easist way is trigger and if you dont need it just in time but for example every 10 seccond, the better is job which cannot fail the standard SBO transaction (triger may and may be unsafe).
Hope it helps
Petr

Do I need to recreate the View when the underlying field changes?

Re: Do I need to recreate the View when the underlying field changes?
I did an ALTER TABLE1 to change FIELD1 from varchar(5) to varchar(7). TABLE1.FIELD1 is in VIEW1. When I do a SELECT * FROM VIEW1 it shows 7 characters. But when I look at VIEW1 in object explorer (after refreshing), FIELD1 is varchar(5). Do I care?
Should I recreate the VIEW1?

If you have refreshed using sp_refreshview stored procedure then you are good, if not then here you go...
The metadata for the view is not automatically updated when the tables are modified.
The fix is to either drop and re-create or alter the view or to use the sp_refreshview stored procedure.
Example :
EXEC sp_RefreshView View_Tablename
GO
http://msdn.microsoft.com/en-us/library/ms187821.aspx
Raju Rasagounder Sr MSSQL DBA

Event when the order is paid

Hello,
i need to make some actions when the order is paid, is there some "enhancment point" where can i add code for these actions? or how can i do it?
thanks
JJ

Hi
Ask your Functional persons to throw some light on what is the requirement and the process how they are going to achieve it ?
<u>Please elaborate your requirement.</u>
Just for your knowledge, Refer to the links related to Payment terminology in SRM
<b>http://help.sap.com/saphelp_srm50/helpdata/en/92/fd7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/e7/72623c6b69bf70e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ad/fe7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/a4/f1db8a5422408695e1d5265477ecd7/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/a3/faaf39bfa36a79e10000000a114084/frameset.htm</b>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

To set an error while saving the order when the item categor changed in CRM

Hello SAP Gurus,
As per our current system set up, whenever the order created in CRM once replicated to ERP should not change the item category in CRM .If the item category is changed( allows the system) and saved, it gives an error as u201CItem category should not be changedu201D. We have been encountering this type of issue since long back
To avoid this type of issue, an error should through while saving the order when the user changes the item category in CRM.
Can someone help me to achieve this.
Thanks in advance.
Cheers
Sreedhar

Sreedhar,
Can't you control it by Item Category determination?
JD

[CRM] Check the order after adding line items

As an enhancement, I've created a piece of code that determines the default quantity for an item. On its own, it works as intended.
When creating a new contract based on a template, the same default quantity coding is being executed, thereby - in most cases - adding the quantity of 1 for the items.
Without that coding, a user would have to enter a quantity and press <enter> to confirm. At that moment a couple of checks are being performed on the items, which can result in errors.
The problem is that when the default quantity is filled in for the user, there is no need to press <enter> and so those checks are skipped. Even though there should be an error (at least in the test case), we see nothing.
The default quantity is being called from a CRM event (after creation of an item) and used the CRM_SCHEDLIN_I_MAINTAIN_OW function to change the quantity. After that, control is turned over to the system once again.
Is there any way of forcing the same checks on the order without having to hit the <enter> key?

As an enhancement, I've created a piece of code that determines the default quantity for an item. On its own, it works as intended.
When creating a new contract based on a template, the same default quantity coding is being executed, thereby - in most cases - adding the quantity of 1 for the items.
Without that coding, a user would have to enter a quantity and press <enter> to confirm. At that moment a couple of checks are being performed on the items, which can result in errors.
The problem is that when the default quantity is filled in for the user, there is no need to press <enter> and so those checks are skipped. Even though there should be an error (at least in the test case), we see nothing.
The default quantity is being called from a CRM event (after creation of an item) and used the CRM_SCHEDLIN_I_MAINTAIN_OW function to change the quantity. After that, control is turned over to the system once again.
Is there any way of forcing the same checks on the order without having to hit the <enter> key?

Why the delivery date in the order not changing with P.O???

Hi All,
I am encountered with an issue that in a P.O the delivery dates are kept as customer requested delvery date and these cahnges are not updating in the order.
According to standard SAP the change in delivery dates in a P.O should get updated in sales order.But its not happening if we keep this date as customer requested delivery date,Why is it so?
I would explain with an example so that it would be clear:
An order is created say 03/31/2011 and the requested delivery date is 05/02/2011.
Confirm delivery date is 05/10/2011 (because in purchase info record it is 40 days)
Now when P.O is created this confirm delivery dates will come.If we change these dates to any other dates it would replicate in the order.But if we keep these dates as customer requested delivery date, it is not changing in the order.
Please any one help me out....
Regards & thanks.
Edited by: deepak567 on Mar 31, 2011 7:50 PM

Dear,
Please check the timing in work scheduling view. other wise schedule the routing and maintain time there and check your result.
In material Master MRP2 screen you will get Scheduling Screen where you will get
In-house production
GR processing time
Plnd delivery time
These are lot size independent but value in work scheduling view are lot size dependent.
Go to VOV8 and check the Lead time part. If u will maintain lead time of 2 days, the req deliverty date will be 2 days frm order creation date.
You can configure this in the configuration of the Sales document type in VOV8. Here we can specify the value and as per that configuration the date will be defaulted.
Regards,
R.Brahmankar

Event trapping when the active document changes

Hi all,
Apologies if this question has been asked / answered before. I don't get out much.
Is there any way, in ExtendScript, to get an event when the user brings a different document to the front? Something similar to the "beforeOpen" event, but which fires when the activeDocument changes?
Seems to me that something like that would be quite handy. But then, maybe I'm just odd.
Thanks,
Chuck

Well, I'll answer it...
There is no way to do it with ExtendScript and InDesign alone.
You can do it (and I do in one app I've written) with APID from Rorohiko. In fact, I use APID as my primary event engine.
Events I routinely use from APID:
subjectCreated - when a frame or something has been created.
subjectDelete - same, but
subjectModifed - when an object has been modified
subjectModifed-text - when a text object is reflown
docSelected
docDeselected
selected - a page item is selected
deselected - a page item is deselected
Regards
Bob

Why does planning indicators change when the safety stock change?

Hai All,
I created a BOM for a finished material (FM1)and entered another finished material(FM2) in item list.
Now in MRP, I did single item multi level planning for the FM1. I checked the planning file entry through MD21 and it has NECH and NECPL marked. I checked for FM2. None of the indicators are set. Then I have been to material master for FM2 and in MRP2 screen and changed the safety stock to 950. Then I checked the plannig file again and I see the indicators NECH and NETPL are checked. I then made the safety stock 0 and checked the planning file. There is no change.
My question is why were the indicators NETCH and NETPL checked when I increased my safety stock for material FM2 from 0 to 950?
I understand that NETCH is the planning for Net changes and NETPL is for planning for changes in a horizon.
Are these indicators set because I made a change to the material? or is there any other reason?
Thank you.

Visu
The planning indicators change when there is an amendment to the planning situation that requires MRP to replan a material. Essentially, by upping your safety stock from 0 to 950 you are requesting that the MRP system replans that material to ensure that there is sufficient safety stock available.
Hope this helps
Ian

How to trigger a refresh of a dropdown list when the selection is changed

Hi,
This is a general ExtendScript question, but since I'm working with FM, I'll ask here first. I have a bit of a paradox here and I'm not sure of the best way to handle it.
I have a dialog box with a dropdown list, where I want to refresh certain controls when the user changes the selection in the list (dropdownList.onChange). This includes refreshing the contents of the list itself. However, the problem is, as soon as I try to refresh the list contents, it triggers onChange again. So, if I put the call to refresh the box within the onChange handler, it results in an endless loop, because my refresher function triggers onChange when it refreshes the list.
Does anyone know a better methodology, where I can safely trigger a refresh of a dropdown list within the list's own onChange event handler? I really wish that onChange was reserved for a user action only, or there was at least some property to that effect.
Russ

Hi Russ,
you can stop that with "stopPropagation()"
You can find this in "Javascript Tools Guide" on page 150.
I'm not able at the moment to send you an example 'cause I'm in a hospital for a while.
Happy New Year!

Notified when the active page changes

Hello,
We have a panel that displays the content of script lables. A script label can be added to a page.
How do we determine the current page? The page might be selected from the from the pages panel and might not have any items on the page. Our ActiveSelectionObserver is not being called when the visible page is being changed.
Thanks.
P.

Well, I'll answer it...
There is no way to do it with ExtendScript and InDesign alone.
You can do it (and I do in one app I've written) with APID from Rorohiko. In fact, I use APID as my primary event engine.
Events I routinely use from APID:
subjectCreated - when a frame or something has been created.
subjectDelete - same, but
subjectModifed - when an object has been modified
subjectModifed-text - when a text object is reflown
docSelected
docDeselected
selected - a page item is selected
deselected - a page item is deselected
Regards
Bob

How to change row background when the value was changed?

hello expers!!
i need your help...plz help me.
i want my table row(specific) background changes when the user changed the value in a cell. I am able to know that a value in a cell was changed but the problem is i dont know how to change row color background. I've researched over the internet on how to solve this problem but nothing was found.
please see the link to help you visualize what i mean. tnx!
[http://www.flickr.com/photos/28686474@N04/2708299927/]
tnx in advance!! code snippet will be a great help...
Edited by: kagaw3000 on Jul 27, 2008 8:22 PM

final JTable table = new JTable(data, columnNames) {
int lastRowChanged = -1;
@Override
public void tableChanged(TableModelEvent e) {
     super.tableChanged(e);
     lastRowChanged = e.getFirstRow();
     repaint();
@Override
public Component prepareRenderer(TableCellRenderer renderer,
               int rowIndex, int vColIndex) {
Component c = super.prepareRenderer(renderer, rowIndex, vColIndex);
     if (rowIndex == lastRowChanged) {
          c.setBackground(Color.RED);
     } else {
          c.setBackground(getBackground());
     return c;
...........this code will changed background color when data was changed BUT if i changed another data in another row the previous backgound color(RED) will be erase. To make it more clearer, it will only change background color of a row only to one row NOT to multiple rows(that is being edited).

Alert in crm when the order is changed in ecc

Similar Messages

Maybe you are looking for