Aligning data in Diadem

I have 3 data curves from three test runs that I need to align.  How do I do this in Diadem.  I was considering writing a script using the cross correlation function but ultimately, I am seeking the optimum set of lags that maximizes the cross-correlations of all three curves, then needing to shift the data sets so the curves are properly aligned.  Any suggestions would be helpful.

Hi jgabe93
In message 8 of this thread our DIAdem Expert wrote a VBScript that aligns the curves plotted in the VIEW panel.
You can adapt it to use it in your project.
Have a nice day!
Chris S.

Similar Messages

  • How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

    how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

    Numbers can store pdfs pages or clippings but does not directly open pdf files.  To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
    Then hold the option key while selecting a column of data.
    Then copy
    Then switch to numbers and paste the column into a table
    Then repeat for the other columns in the pdf document
    It would be easier (in my opinion) to download the QFX or CSV version from your bank

  • How to load a range of data in Diadem?

    Hello; I have a set of Access DB containing analytic data of 5 jears. How can I import a range of data (eg. all year 2003 data)in Diadem for analysis?
    Thank's

    Thank's,
    but I couldn't choose explizit the time channel. Also I couldn't set a command like 'between 1.1.2003 and 31.12.2003'. Attached is an exemple of the dataset. The time channel is '50_DAT'.
    It would be nice to get an answer.
    Thank's Matthias
    Attachments:
    B0P2DAT8_50.MDB ‏400 KB

  • How do I align data within a column?

    In the newly updated Numbers (Mac), I cannot find how to align data within a column.

    The justify data select the column by clicking the column header (the letter at the top of the column) then open the formatter (top right):
    then select the "Text" formatter and select the type of aligment you want:

  • Plotting data in diadem via LV

    Is it possible to plot data in diadem by specifying the x and y axes values from LV at runtime? I am looking for a solution something like:
    1. Load data into Diadem(give the command from LV).
    2. Load layout into diadem(give the command from LV).
    3. Specify the channels to be plotted from LV.
    4. Plot data
    5. Stop
    Thanks,
    Yash
    Solved!
    Go to Solution.

    Hi Yash,
    Please can you have a look at this piece of example code, I think it does what you have requested.
    You will need to build up a customised array to insert the different channels. You will also need to know the name of your axis system in DIAdem, you can find this by hovering over the axis system in the report view of DIAdem and looking in the status bar at the bottom left of the application window.
    Regards
    JamesC
    NIUK and Ireland
    It only takes a second to rate an answer

  • Data interpreter for loading of DASYLAB data into DIADEM

    Can NI deliver a data interpreter for loading DASYLAB data into DIADEM?

    Hi zzzz,
    It is my understanding that DasyLab has the ability to write DIAdem *.DAT files. This I have gathered from the fact that US customers have sent me *.DAT data files generated by their DasyLab version, in which several properties are called by their German names. So I assume the DasyLab *.DAT file output was originally written for a German audience, but the data made it over just fine. I suppose that could have been a special feature of their particular DasyLab, but check if you can output *.DAT files with yours. If not, please write back.
    Regards,
    Brad Turpin

  • Pivoting date data in Diadem - summarising data by grouping

    Hi,
    Is there a way to summarise date data in Diadem?
    For example, if I have a file with the following headings:
    Date/time, on/off, duration
    The Date/time column is recordrded in date, hours and seconds,
    the on/off is either 1 or 0
    duration is the difference in time values when on/off is 1.
    Is there a way to summarise the date data by day or possibly by month? (The corresponding numbers in 'duration' would need to be assigned to the appropriate day or month)?
    The equivalent calculation tool would be a pivot table in Excel.
    Look foward to a response.

    Hi Brad,
    Thank you for your prompt response.
    I have attached a file in the code section with some data. (Apologies for this, but the NI website said the content did not match the filetype). (I will try and get this right and send the attachement as an excel file. DIADEM should be able to read in the text file).
    The columns are as follows: Event, Date,Time,Duration On,State.
    (please note 1) that in the 'event' column there are 5 boilers - good for pivoting once grouped per boiler,
                         2) that 'State' is either a save or a bypass - also good for pivoting i.e. which days and boilers were in bypass, and which days and boilers were in save)
    I would like to be able to summarise the data as follows:
    Show a period(group by month or year) the sum of the Duration On, then display the result on a monthly histogram showing for example daily Duration On vs date.
    Then
                       on an annual histogram showing for example monthly Duration On vs month.
    As the last part of the exercise, how can I break out doing the 2 steps about for each of the 5 seperate boilers and show when each of the boilers were in a save or a bypass?
    (Is a pivot table in excel required or can all the data processing be done in DIADEM?)
    I appreciate your assistance in resolving this issue.
    Sincerely
    HotCold
    Attachments:
    Heathrow.txt ‏442 KB

  • Aligning data in sap script

    hi guyz,
    how can i align data in sap script with spaces between..
    regards

    Hi,
    you have to create paragraph formats for this, in paragraph format you can define tab sapces.
    use that paragraph format in command box of ur window editor, where ever you want the space just use ',,'  which will apply tab space (the sapce you have declared).
    reward if useful,
    Thanks,
    Sreeram.

  • IOS: storeDouble / loadDouble crash on non 32bit aligned data

    Hi,
    Not sure if this is the right place to be posting this.
    Using HaXe, i've been playing with the storeDouble and loadDouble opcodes (much faster than ByteArray readDouble / writeDouble) and i've noticed that when compiled for iOS (ipa_test or ipa_debug), using either with a non 32bit aligned address into the ByteArray results in a full crash of the app. Using the interpreter (ipa_test_interpreter or ipa_debug_interpreter) works.
    In a way it's good that it crashes as it alerts you to the fact that you are using poorly aligned data, which results in degraded performance, but I thought i'd report it.
    Cheers,
    Dave

    This is the exact same thing I'm seeing on my iPhone 4.  Like you, I had initial problems with iOS5. It was a nightmare!  I eventually did get it on iOS5, and everything seemed OK, until these springboard crashed.  I have never jailbroken my phone either.  Wondering if you're on the east coast though, because my errors are happening just after 11am and 11pm, usually around 11:20pm every single cotten picken day!  It's driving me batty.  Don't have phone support anymore, but I'm still thinking about taking it into the Genius Bar.  I've restored from my backup, and I've set it up as a new device as well.  Still seeing the same thing no matter what I do!

  • Align data in html cfgrid CF9

    How does one align data wihtin a cfgrid in CF9?  Not sure of the correct .css style to change.  The Headeralign and dataalign only work for Flash grids.  Any help would be great, thanks in advance!

    How does one align data wihtin a cfgrid in CF9?  Not sure of the correct .css style to change.  The Headeralign and dataalign only work for Flash grids.  Any help would be great, thanks in advance!

  • Error Occuring While Processing Data With DIAdem 8.1Excepti​on EAccessVio​lation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll​". Read address 37363430

    Hello,
    We are having an issue running Diadem 8.1 on a new HP XW 9400 with Windows XP SP2. 3 errors have been occuring with frequent crashes, they are:
    1) "1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430.
    2) The instruction at "0x7c9111de" referenced memory at "0x352e302d". The memory could not be "read".
     3) ---Error---   DIAdem
    Error in Autosequence - processing in line: 74 (IARV_VAR_GET)
    Runtime Error while executing command "Iarv2Txt$ := FR(T9,L1)"
    Error type: ACCESS VIOLATION
    Error address: 000101DE
    Module name:ntdll.dll
    We are using the same scripts and version 8.1 on a variety of Dell desktop computers (W2K and XP SP2) without any issue, looking for suggestions as this affects no other software on the HP XW 9400 other than DIAdem. Appreciate any suggestions.
    Message Edited by swillh on 06-25-2007 08:55 AM

    Christian,
    I will answer your questions in the text below. Thanks for your help.
    Hi swillh,
    I also would like to help you.
    Unfortunately, The reported access violation in the central Windows ntdll.dll is very unspecific.
    May be the following questions will help you to provide me more info.
    1. You mentioned that the aut's and - I think - also the accessed text file reside on a server.
    Is there a stable network connection?
    The server can sometimes be a little slow but the connection is good. This computer is using the same connection that the prior computer utilized without issue.
    Are the files accessed by multiple clients simultaneously?
    It is possible that more than one computer can be accessing the same file, but again, this has never been an issue. We are reading the files only, not writing to them.
    The processing routines we are running have used for over 5 years without any issues until adding this computer.
    Is the text file read by one client while another client is writing the same file?
    No, files are "read only"
    2. Have you already tested opening the file with the FileOpen command before calling FR?
    Yes
    Do you see any chance to convert the aut to a vbs file? This gives you more alternatives in accessing text files.
    3. What do you mean with "processing ATD's with 30 or more channels of data"? Where is the relation between ATD files and data channels?
    Processing Crash Dummy data with file sets low in channel count (15 channels) result in successful processing without any crashes or access errors.  When processing dummies with more than 20 channels we sometimes encounter these issues. The higher channel count may be the only common factor I can find in these faults.
    Steve
    Message Edited by swillh on 07-09-2007 08:44 AM

  • How to find out the aligning Data dictionary table for a structure.

    Hi
    As the table controls are associated with strucures, the data input goes to the data dictionary table aligned to that structure. Is there any way we can find out the table related to that particular structure ?
    Thanks,
    Dhareppa

    Hi,
    The structure and its fields may be associated with multiple database tables.
    You can try by where-used list of the structure/field and then you can look and determine the table by hit and try method.
    Also as suggested above you can try get the SQL trace and then ypu can look for table associated behind the structure/fields I believe this is the best way to find the DB table.
    Thanks,
    Ravi

  • How to align data in a BC4J Table

    Hello,
    has anybody tried to align the data of a <bc4j:column>? It does not support something like hAlign or vAlign.

    Hi, Christian!
    vAlign e hAlign I don't know but there is an element called <columnFormat>. It will allow you to format bc4j columns. The example below is from my code.
    <bc4j:column attrName="cdTabela">
    <columnFormat columnDataFormat="numberFormat" />
    <columnHeader>
    <bc4j:sortableHeader text="Código"/>
    </columnHeader>
    <contents>
    <inlineMessage>
    <contents>
    <bc4j:input readOnly="true"/>
    <spacer width="10" />
    </contents>
    </inlineMessage>
    </contents>
    </bc4j:column>
    Regards
    Rafael

  • How can i transfer filtered data from diadem to excel?

    Hi,
    i'm trying to write a script which would allows me to transfer data automatically from diadem to excel and i need some help.
    i want to copy the last of my selected channels, open an excel file and paste data into it.
    My script look like this
    Dim ExcelTable
    Call DATABLCLPCOPY("1,137,139,142-168,172-225,227,229,231,233,235,237,239,241,243",j,1) '... CHNNOSTR,CHNROW,VALNO
    Set ExcelTable=GetObject("K:\...\Anl_kal_v3_2006.xls!SN1")
    ExcelTable.Application.Visible = True
    One problem is that i don't know how to continue and the other is that this script only get the programm MS-Excel started and don't open my file.
    I hope i explained it the way you could understand and so you could give me ur help.
    Thanks
    Patrick Etoumann

    Hi Patrick,
    In DIAdem we provide an example which shows the things you would like to do. The script name is "Expl_OLE.vbs". You find it in the folder ..\Libr\Aut\.
    I hope this will help you.
    Greetings
    Walter

  • Plotting GPS data in Diadem

    I am analyzing some GPS data and I want to visualize the data on google maps. I remember seeing an exmaple on this topic ( google maps and Diadem interface) but cannot seem to find it anywhere.
    I am using Diadem 11.1.0 and I doubt the GPS functionality is not available for this version ?
    Please suggest alternate ways  to visualize this if possible.
    Thanks
    Vamshi

    Hello Vamshi,
    The GPS plotting functionality became available with DIAdem 2010, and is available as part of the Professional version of DIAdem.
    It uses Open Street Map (not Google maps) due to Google licensing restrictions. You can see the maps here: http://www.openstreetmap.org/
    You can download the DIAdem 2010 evaluation version here by selecting the "Evaluate DIAdem" section: http://www.ni.com/diadem/
    DIAdem offers DataPlugins for GPX and NMEA GPS files, so these can be loaded very easily and then added to a map.
    Please ask if you have additional questions,
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Maybe you are looking for

  • EXEC SQL join in ABAP program

    Hi All, I am using EXEC SQL join in my ABAP report,but it is giving dump.could you please correct my following code? START-OF-SELECTION.   CONCATENATE '%' pa_match '%' INTO tp_match.   EXEC SQL.     OPEN dbcur FOR     SELECT  kunnr,name1, banks      

  • BOOTcamp greyed out

    After installing new bigger HDD to my MBP (late 2009) and re imaging with winclone I was able to use both osx and mac from start up However just recently the drive containing bootcamp vanished .. is greyed out under Disk utility and reports as unrepa

  • Another problem - phone cuts off incoming calls

    Has anyone else had issues since upgrading to iOS4 or at any other time with incoming calls being cut off just a second or so after the phone starts ringing? I've had this happen twice to me today although I've never had the problem before. I know th

  • Getting audio from Pre Pro into AE for Music Video

    Hello All,  My situation is this. I'm doing a Dance remix Music video.  The original song was a ballad. The footage used for the Dance Mix consists of both the ballad clips sped up (ballad music was at 61 beats per minute) and footage shot to the dan

  • DBMS_OUTPUT on these Standard functions..?

    Am i using the right version ? FUNCTION getDocumentElement(doc DOMDocument) RETURN DOMElement IS docelem NUMBER; delem DOMElement; BEGIN if doc.ID = -1 then raise_app_error(NULL_ERR); end if; dbms_output.put_line('The id is' | | doc.id); docelem := x