Alignment Issues with Creating Crop marks

I am doing some very basic print layout and creating crop lines at the tops and sides of the page for the printer. Unfortunately my crop marks are not aligning. For example when I specify a line to appear at the top of the page (which btw is 8.5" x 11" US Letter) via the Metrics Inspector at the coordinates start : x=1.75" y=0" and end: x=1.75" y=2", when the document is printed it is actually off by a 0.25". It also does not line up with the crop mark I put at the bottom of the page. This may not seem like a lot but will cause the printer to cut the paper uneven. Is there some way to insure that the cop marks print on the page exactly where they say they are in the digital version of the document?

Have you enabled alignment guides in the Pages Preferences? It is a very handy feature to align objects in a document.
When you are done then select the crop lines and group them. Then lock the grouped object!

Similar Messages

Help on saving back from CS4 to CS3 with the crop mark issue.

I am not asking how to create crop marks I needing to know how to save back from CS4 to has already has been created in 3. See issue below.
I am the only one with CS4 in this office. I have to save back to CS3 for everyone else to read. When looking in the artboard, I can see the un-editable crop marks that were made in CS3, but when I work on the file and save it down, they can no longer call up the crop marks. Any clue as to were they might access what should be there?

These work great, thank you so much!
So long as I only work on new stuff, I guess it doesn't matter if I switch to CS3. :-) I'll turn down requests for major edits to long documents already done in CS4!
We have 2 feet of snow on the ground here and are expecting 10-20 more inches of snow starting around noon! DC is basically shut down. I live right in the middle of the District, and the roads are a mess here. I can't imagine how bad the suburbs are.
Thanks again!
Phyllis

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Creating crop marks in pages

Lo all.
I'm using pages to make a 24 page booklet. To send this to printers they all require 'crop marks' and 'bleed'. Is there any way of creating crop marks in pages?
I can't find any way of doing itbut it seems staggering that it wouldn't be able to generate these.
What am I missing people!!
Thanks,
dean.

Pages can't generate crop marks natively (and I know of no other $40 application that does). If you are starting a new project, you can set up a custom template to do this. In Page Setup, set the page size to a custom size larger than the page you need (e.g., a few centimetres larger horizontal and vertical than the final page size). In the new page that appears, set the page guides to mark the border of the document, then set the crop and bleed marks where specified by your printer.
Note that this won't really help if the document already exists, since changing the page size may mess up existing formatting.

I think I am having shutter issues with my 5D mark iii. image is vignetting on top of frame.

I think I am having shutter issues with my 5D mark iii. image is vignetting on top of frame. ( left side when shooting portrait).
does not happen all the time. shoot 20 frames, not a problem then will happen 4 or 5 in a row or every other shot for a few shots.
Studio situation with 4 lights but it is not a light issue. subject is dark also. all lights fire at full. happens weather at 1/100 or down to 1/20. these 4 examples were shot at 1/50 f 10 iso 100. raw converted to jpeg. shooting teathered but I dont think that matters. has anyone else had shutter issues? can any one from canon give me any info or help??

It may be that the flash is firing as the shutter is opening... but if you're having an issue with a sticking shutter, the shutter isn't completely open when the flash fires.
If this is the case then it wouldn't matter how long the shutter is open because the flash doesn't provide light continuously when the shutter is open... it only gives a burst. That momentary burst is normally fired at the moment the shutter finishes opening up completely (but if the shutter is sticky and isn't completely finished opening when the flash fires... you'd have a dark edge.)
If you used 2nd curtain shutter so that it doesn't fire until the moment before the shutter is intended to close, you shouldn't see vignetting even if the shutter is sticking.
But this makes me wonder what the shutter count is on your body and if it needs service.
Tim Campbell
5D II, 5D III, 60Da

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

Colour alignment issues with CP1515n

I'm having some colour alignment issues with my Color Laserjet CP1515n. Lately, I've noticed that the 3 colours go out of alignment from the middle towards the right of my printouts. Alignment at the left towards the middle half of the page is ok but gets progressively worse towards the right side of the page.
Nothing in the user interface allows me to reset the colour alignment. What can be the cause of this and what's the remedy? This printer is slightly over a year old and has only just gone through its first set of toner cartridges.

I am also having alignment issues to the same nature as the post below. I have just replaced the Black, Magenta and Cyan toners. After doing this the alignment goes out of register from left to right (left edge fits right edge all colours are out of fit by 2mm).
I have also found nothing in any manuals as to how to adjust or fix this problem. This is the second time I have replaced these colours. I have re-calibrated and taken the cartridges out several times but it is still the same.
Any advise would be helpful. As it is at the moment the printer is unusable for my job and it's the only one I have.

Outlook 2007 , calendar issues with creating meetings - any ideas?

Hi All
My boss has a Mac and has installed office 2007. Configured Outlook to connect to our office exchange, all ok.
Now, to book meetings we use the resources field when added someone. This is not visble in the mac version of office.
Now, also a issues he has seen which I have witnessed, that if he creates a meeting via his Windows machine in outlook, as soon as he opens Outlook on his mac, all meetings become unbooked. They are still there, just all marked as provisional and hence what happens, he goes to the meeting, to only find the room booekd out to someone else as its only marked as provsional.
Any ideas, anyone else seen this?
Cheers
Scott

Since this is software issue with Outlook, and not one related to Macs or Mac OS, you should probably post your question on an Outlook forums:
http://www.office-outlook.com/outlook-forum/

Issue with creating List of Values in Business View Manager

Hi,
Could any one help me to figure out what this issue refers to?
When i created a List of Values in Business View Manager, it is throwing the following error!!!!
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
Prior to creating LoV, i've done successfully with creating Data connection, Data foundation, Business element and Business View..
Thanks
Viswa

Hi Visaw,
Firstly,
-->Open Repository Explorer,
-->where you are have related DF,DC,BV,BEand LOV's
-->Right click on LOV's -->There you can find Schedule list of values.Then schedule list of values and check if it prompts for errors.
If you face the same problem, what is the error you are getting.
Else try to use the LOV's and proceed further.
-->Check whether the LOV's are pointing to the same Business View and check the Business view pointing to the same Datafoundation.
If you are facing the same problem then try with the below steps:
-->Try to Create a report at designer level Using then Business view
-->Create two new parameters and select the existing parameters(LOV parameter's)
-->Check whether it is working.
-->If you face the same problem ,Update the connection of Business view manager.
Go to Database tab-->Select Set DataSource location and update it with current Businessview Manager.
Try this ,and let us know.
Regards,
Navin

Project Online, Issue with creating projects from EPTs (with workflows)

Hello, I am using Project Online. I am not able to create a new project based on the "Software Development" EPT. I get following message: Sorry, something went wrong An unexpected error has occurred. TECHNICAL DETAILS Troubleshoot
issues with Microsoft SharePoint Foundation. Correlation ID: 29b2b89c-607f-1000-80c2-80bbbb7ff088 Date and Time: 15.09.2014 03:57:25.
Any ideas what went wrong?
Thanks in advance,
Martina

The reason for this behavior was the following:<o:p></o:p>
The currency of the PWA settings have been changed.<o:p></o:p>
Looking into the queue of the EPT we found the following hint:<o:p></o:p>
Project:<o:p></o:p>
ProjectCurrencyConflict (23001). Details: id='23001' name='ProjectCurrencyConflict' uid='f1850fb3-c53c-e411-9a1e-00155d58393b'.<o:p></o:p>
After changing back to settings "Allow projects to be published in various currencies" the workflow works fine.<o:p></o:p>
Nevertheless this issue is not clear for us why it appears after a currency change in the workflow. Maybe a sleeping bug?<o:p></o:p>

Issue with create user and issue with Java Development tab

I have two issues with EP,
1. When i login with Super Admin user, i am unable to Create any user from User Admin tab. Do i have to change the settings of the Super Admin? or is there any criteria for creating the user?
2. How to assign any user the Java Development tab. Though i login with a super admin user i am unable to see the Java Development role and when tried to assign the role, there were no searches for that Java....

Hi Adi,
by default the super administrater has got all permissions. Thus you should be able to create portal users when using a user assigned to the portal group Administrators.
In order to help you with your first question we need more information. Please describe the malfunction in detail. Have a look into the log files and post related error messages.
Regarding your second question: You will find the java development role in PCD
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper.
If not, then you haven't installed the PDK business package in your portal.
Go to service.sap.com, choose downloads and search the package (PDK should do it). Download the package, and deploy on your portal using SDM.
Best regards,
Martin

Alignment issues with menu widget and added web safe fonts

I wanted to use a font that was not already on the web safe list so I added one. I have a background rectangle I drew in muse for the main navigation to center on. In muse, I have to shift the menu almost entirely off the rectangle for it to appear centered on the rectangle in the browser. The sub nav I created has a background fill to match the rectangle the main nav sits on. Even though there is no overlapping in muse, there is overlapping of the sub nav fill and the rectangle behind the main nav in the browser. So it looks like 50% white fill on top of 50% white fill. It's obvious and looks stupid! Is this a program bug??? Using CC muse.

I have this issue fixed. But now I'm having a new issue with objects shifting. I really think it's just Muse and the program is buggy! I have read and watched everything I can find on Muse and it's supposed to be so simple a print designer can create beautiful websites. Well, I am a web designer. I understand code. I have used Dreamweaver for 8 years. I wanted to see what was so great about Muse. I'm finding out NOTHING! Because of it's bugs I spend hours trying to fix problems the program creates. I should have just stuck with Dreamweaver! Thanks for trying to help...

Alignment Issues with Spry Menu Bar in Safari

www.laurentambard.com
I am new to CS5 and currently building a site for a friend. Having issues with aligning then far right spry menu bar so that it is flush with the page. It only shows a problem on Safari (as far as I know). Also the second tab (About) is dropping down slightly when the drop down menu is selected and not sure how to fix it.

If you place the menubar in a container with an ID of nav or similar and a background color of #EEE so that it blends in with the background colour of the menu items, the centralise the menubar and menu items as per http://labs.adobe.com/technologies/spry/samples/menubar/CenteringHorizontalMenuBarSample.h tml, it should go a long way to meeting your requirements.
Gramps

Issues with Creating Outlines in CS2

I'm having an issue when a create text outlines in InDesign. For some reason, and this only happens so far with 2 fonts, when I outline text (highlight text - click "object" - "create outlines") an extra character is added on to the end of certain words. As far as I can see it is only happening with words that end in "t" like August and Northwest and it adds a second "t". The two fonts I've had issues with are Bickham Script Pro and Asturias. The major problem with this is I have clients approve their proofs, then I outline the text in preparation for printing (which is when it adds the extra character), since I'm not doing additional proofreading after the client has approved, the file makes it through printing with the extra character. Has anyone else seen this? I've attached an example of what it looks like, the extra character is on the word "Northwest"

{I hate the way this forum works! I follow stuff by email, which gives no indication of post no. So, I had to click the link in your post to access the thread on the web. (...wait...) No post nos. Sign in (...wait...) go to prefs (...wait...) select Flat view and Save (...wait...) return to forum (...wait...) - and find that post 17 was the one I'd replied to, as the Threaded view properly indicated.}
My point was that the text had clearly not been converted to outlines. Outlines had been created from the text and added to the file, and that is what displays, but the text is still there - otherwise, why would the fonts be embedded? And why would that one piece of text peep out on the right-hand side?
Noel

Awt alignment issue with japanese character

I am using japesenes OS(Win XP ) and running awt application (JDK1.6).
For Choice box (dropdown box) ,if the font is less than 15 and if there
is a mixture of japanese and number ,the numbers and the Japanese characters
are not vertically aligned.
I am using java.awt.Choice component to display all the months
Choice month =new Choice();
month.insert ("1 \u6708", 0);
month.insert ("2 \u6708", 1);
month.insert ("3 \u6708", 2); .. so on
While running the applet , in display window
The numbers and the Japanese characters are not vertically aligned.
When a month is selected, it is slightly truncated at the top.
My default font is [family=SansSerif,name=sansserif,style=plain,size=12]
when i change the font to 15,the characters are properly aligned.
Did anyone faced this before? if so can you please clarify why this behaviour when font size
is less than 15 or how to resolve this issue without changing the font size .
thanks in advance,
ruhul

Hi,
I have also faced the above mentioned issue.The workaround of using Full Width unicode though resolves the alignment of Japanese with english/numbers/special characters.
There is other issues with this to mention a few:
(a) The text is still top aligned.
(b) A leading and trailing space is added to the value in the choice component when full width unicode value is used instead of english/number/special characters.
It would nice if the mentioned issues could be resolved or if a work around could be suggested.

Alignment Issues with Creating Crop marks

Similar Messages

Maybe you are looking for