All CC Programs have a Crash on Save Issue...

I am constantly having to go back to the 5th Version of PS, AI and ID because the CC versions are so damned unstable that they will often crash rather than save anything, no matter what I do. I'm really not getting my money out of this subscription at this point. Not even close.
I'm working on a 2012 ASUS Essentio running Win 8.1, I've checked memory and I'm not even touching a GB out of my 8GB, so that isn't it. And this problem plagued both CC and CC2014, but not 5, so this has to be a software issue.

Re Background Saves:
In Photoshop, in the File Handling section you will see settings for Save in background and Automatically Save Recovery Information.  Try alternate settings for those.
Windows doesn't offer the event information I mentioned, you have to go get it:
Hit your Win key and type event viewer.  Start the Event Viewer.
Expand Windows Logs and click on Application.
Scroll down until you see a red Error event corresponding in time to the Photoshop failure.
What Faulting module path does it show?
While you're there, check in you System event log as well, and see if you see any problems listed with your disk.
Based on what you've written so far I suspect you may have file system corruption or a disk failure brewing.  Before stressing your disk further it might not be a bad time to back up your important files.
-Noel

Similar Messages

  • CS6 will not update for CC, all other programs have updated but CS6 keeps failing

    I have updated via help in CS6 and all programs have updated for creative cloud, however CS6 keeps failing.
    It is my original packaged version however I have subscribed to CC so as to maintain updates.
    Can you advise please.

    Run the Creative Suite Cleaner Tool, let AAM reinstall, try again.
    Mylenium

  • All adobe programs open but crash on the splash screen MAC??

    just wiped my hard drive clean today and was reinstalling the programs directly from the website since I already have an adobe cc account.
    All the ones I installed today: Dreamweaver, Flash, Premier, Illustrator, Photoshop, Indesign will open but crash immediately on the splash screen.
    DId not have any problems before when I was just running CC before I wiped the hard drive clean.
    Anybody have any help ?!!?!?!?!!!!!!!!!  AM i MISSING PLUGINS? I just downloaded the newest java.
    ALSO, I'm currently trying to install maverick, since it defaulted me to mountain lion. Will this fix the problem?
    Thanks guys so much I'm a student and have a big project to finish up!!!!!

    SORRY. I INSTALLED ADOBE CC 2014 TODAY!! I HAD INSTALLED ADOBE CC 2014 BEFORE I WIPED THE HARD DRIVE CLEAN AND IT HAD WORKED JUST FINE. I had ADOBE CC before and IT gave me the upgrade to 2014. NOW NOTHING BUT PROBLEMS AND NON opening/crashing after the hard drive was wiped clean?!!!

  • Up until now, all my programs have been compatible.

    I have ME and cannot sync. I thought ME and 2000 were interchangeable. Help! Do I have to buy a new computer? Mine works fine all day! Thanks.

    You've posted your question in a Mac and Windows compatibility forum. I suggest you post it in a more appropriate forum dedicated to Windows products such as <http://www.windowsforum.org/forums/index.php?act=home>.
    Good luck! bill
    1 GHz Powerbook G4   Mac OS X (10.4.9)  

  • Help! All CS3 programs continuously crash!!

    I need help - all my CS3 programs have begun crashing! It's happened more frequently since installing Lepoard - but now its unbearably happening.
    I've called Adobe and was told that I can't get tech support because CS4 is now live - though Max was cool and suggested that I reset preferences (Ctrl+Option+Apple+Shift).
    Despite that quick fix - these programs continue to crash! NEED HELP PLEASE!

    Neil,
    Adobe called me on Wednesday stiil couls not figure out the problem, told me to go to Apple. So , I went to apple, upgraded my Ram to 4GB, full diagnostics, and did an archive reinstall.
    Worked great for 2 days. Thought I was in the clear, then today, I opened photoshop to open a few very small jpgs. (I had firefox open) Then all of a sudden Adobe installer show up in my dashboard and shows percentage numbers like it is installing something or getting ready to, and photoshop crashes. The adobe updater asks me if I want to install updates, I said no and cancelled out. All along I have been telling adobe that I think the problem has something to do with my registration. On all of my console crashes reports, adobe crashes right after all of theses notes about registration. I have had to re-register my adobe at least 3 times. The 1st time this all happened a technician told me I somehow had an educational copy, made me uninstall and then install a volume license with a new serial number. I told him none of this made sense as I bought a factory sealed CS3 Design Premiun form the apple store. I also told him I didn't want a volume license, I wanted what I purchased. He told me I had to do it. So I did and it didn't work. So the next technician I got, said that was crazy and she can't believe he made me do that, and that my original copy of CS# and serial number were fine and then had me uninstall that and reinstall mine. Naturally, every time I uninstall and reinstall adobe prompts me to register, which I do. But I feel like either adobe has some conflict and kicks me off because it thinks my registration is invalid or Adobe is conflicting with something on my computer. Which no- one can figure out- mean while I sill can't get any work done. Everyone who has looked at my computer said this is crazy, my computer is fine and can easily handle what i do, I don't have anything crazy on here that is supposed to conflict and I triple checked before I bought everything and have multiple times since. I still can not get any work done and am desparate!! Adobe is closed over the weekend and I have to be able to work on Monday.

  • Many programs, including safari, crash when opening.

    Safari, Finder and several other programs have started crashing upon opening them. A crash code is displayed for a split second then disappears. I'm also unable to shut the computer down or restart it. Any help would be greatly appreciated.

    Kart 5 wrote:
    I'm also unable to shut the computer down
    Shut it down by pressing and holding the power button for about 8 to 10 seconds. Wait 10 to 20 secs, then restart. See what happens. And if you post again, specify what version of Mac OS X you are using.

  • I usually have 3-4 tabs open which I am saving to read later. But I loose them all the time when firefox crashes or when another appliaction opens firefox to download. Is there a way to save my tabs ?

    I usually have 3-4 tabs open which I am saving to read later. But I loose them all the time when firefox crashes or when another appliaction opens firefox to download something and it will discard all my tabs. This is incredibly annoying, is there a way to save my tabs ? or get them back when there is no "restore session" button ?

    In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
    To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • My itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

    my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

    i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
    I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!!

  • RH 8 crashes on Save All when copying content between two open projects

    [Win XP SP2] I've submitted a bug report for this issue. Note that RH does seem to save the content as it's dying (a very noble act, I must say), but the behavior is bothersome.
    ******BUG******
    With two instances of RH8 running (dual monitors), and copying content from one project to another, the instance receiving the added content crashes when you click Save All.
    Steps:
    1. Open RH 1
    2. Open RH 2
    3. Copy content in RH 2 and paste it into RH 1
    4. In RH 1, click Save All
    Results: RH 1 crashes (RH 2 does not)
    Expected Result: RH 1 does not crash

    I would try another one with each of these documents.
    Create a new document with 2 pages.
    Name the master pages so, that their names are not conflicting with neither of these 2 document’s masters.
    Delete every style in that empty document, also any swatch
    No drag the pages of the first document into such an empty document.
    Do the same step 1 to 4 with the second document in a NEW empty document.
    Now you have 2 new documents. Take care that no conflicting master names appear.
    In each of these documents create in each style panel a folder and drag all used styles in that folder.
    Save both documents
    Try again to insert the pages of both documents.
    Otherwise, it this does not work out, could you send me via private message the files or a link. I would check it with a Debugging Version of InDesign (InDesign DEV) I can use to find errors.

  • After upgrading from Vista to Windows 7, Firefox lost all my stored passwords, never asks to save them, even though I've checked box for saving them, have made sure history is not cleared, and am not in Private Browsing.

    In Windows 7, Firefox 8.0 does not ask to save passwords, and does not save, them, even though I checked the box to save passwords. I have confirmed that clearing history is not on and that I am not in Private Browsing. This is so frustrating, it almost makes me want to go back to Vista. I have looked at all the suggestions to fix the problem in "Help" and have followed the suggestions, and none of them help.

    I have the TX2 1012NR and its can upgrade just fine!  Here is a few recommendations "only if u have the HP Upgrade program disks"
    If you have them you can install a clean copy and delete everything... Do not use the use me first disk included because it prompts you to install an older BIOS....  Just use the windows 7 upgrade disk and start the process.  The clean install clears your entire drive but does not void your warranty!   When you use the use me first disk after the install it actually loads everything else needed to get you up in running.  The touchscreen driver and the HP Mediasmart programs will have to be downloaded from the HP support site.  Once again its recommended that if there were any programs installed delete them do not try to update them!  This causes issues and countless errors.  Specifically with touchscreen drivers etc uninstall them before installing the ones from HP support.  I found this was not the easy way to do it but the best way...  I also recommend that when doing any sort of BIOS update that you remove your Battery and leave it connected to a power cord only!  Last but not least if you really mess up and its under warranty... Send it to HP they will set it back up to factory defaults under Windows Vista with the more up to date BIOS installed.  I hope my information helps! Sure you might loose some programs but in the end your computer runs faster and smoother because all the programs installed are made for Windows 7....  Also they did release the Touch Pack for download from the Microsoft website here is a link telling more about the features and benefits and how to get it as it is a totally free download... 
    http://windowsteamblog.com/windows/b/windows7/archive/2009/05/27/introducing-the-microsoft-touch-pac...
    Microsoft Link for download:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=b152fadd-82e4-4ddb-a46a-aebe49944428&displa...

  • All office programs crash when I click on the File menu

    I can open files in every program fine but as soon as I go to the File Menu it puts up the "program" is not responding box
    Excel, Word and PowerPoint all crash when trying for the File Menu.
    Outlook will let me go to the File Menu but if I click on Office Account then it will crash. I have uninstalled and reinstalled once already.

    Hi,
    Since you have re-installed Office, this issue may conflict with some other 3rd-party applications. We can check if Office still crash in clean boot mode.
    About how to perform a clean boot, please refer to this KB.
    http://support.microsoft.com/kb/929135
    If this issue still exists, please try to collect the Event log. And you can also upload them through One Drive and share the link to me. I’ll be able to analyze this issue in detail as soon as accessing it.
    Regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • All design programs running extremely slow and takes forever to save and sometimes shuts down randomly?

    Ok so  I'm a design student at a community college (about to graduate soon and will be continuing on getting my BFA) I have all of the creative cloud suite. I have Illustrator, Photoshop, Lightroom, InDesign, etc. Recently I started having problems with all of the programs. Whenever I work in the programs they would run extremely slow. Recently, I tried to save a .eps file that was only about 1.2 GB and it took me an hour to save, and this was when I was working off of my computer desktop. When I place the .eps file in Indesign, everything would go blank and it would freeze up. Also I had an error sign popping up from InDesign saying "out of memory". Im not sure if that is related to my computer's hard drive or indesign itself. I just started using creative suite so the creative suite is pretty new to me. Sometimes in Indesign when I do the Command+w to preview the whole project, it would be completely black and showing nothing and I would hit escape and the whole software screws up. Then I would do a force quit on the software and then Indesign would say there was a serious error and must shut down. That error message has been popping up several times now. I also talked to Apple support and they suggested me doing a Repair disk utility (which I am currently doing right now) and also recommended me contacting Adobe since they know their software. I checked software to see if there is any updates that is needed but everything is up to date. I'm not quite sure why its acting like this so I'm reaching out both to Apple and Adobe to see if both can help me solve the problem. If anybody had experienced this problem before and could help me troubleshoot this issue that would be great.

    I installed the creative suite about a year ago, and this just started happening last weekend. I didn't think it would be a problem and that it would last for a day since I was working on InDesign all day and Illustrator and it usually goes away after I finish using the programs. But this has been occurring for about a week now and has not gone away. and yes the other programs are running slow. I was trying to resize some images for a client and Photoshop was acting extremely slow  when I was trying to resize the image and also place an image into a 8x10 document in Photoshop. I'm not sure how to find my system specifications.
    All design programs running extremely slow and takes forever to save and sometimes shuts down randomly? 

  • After updating to 2012 f3 patch all built programs crash

    I updated to the f3 patch yesterday and now all executables that I've built in 2012 crash without even opening. No error messages at all. Anyone else experiencing this issue on f3 and know of a solution? I've tried installing the 2012f3 runtime but it thinks it's already installed. Thanks.

    Hello all,
    Hopefully I can clarify this behavior a little bit - 
    Jeff·Þ·Bohrer wrote:
    You built some executables in LabVIEW 2012 f1.
    They do not execute with LabVIEW 2012f3 Run Time Engine
    Correct?
    (That might be expected behavior-  NI?)
    The runtime engine was broken by the missing files which is why your executables were not able to launch. To clarify how all the LabVIEW Runtime Engines work - each version of the runtime will execute executables built in that version of LabVIEW. For example the LabVIEW 2011 SP1 runtime can still run LabVIEW 2011, and the LabVIEW 2012 f3 runtime can still run LabVIEW 2012 f1 and LabVIEW 2012. However the runtime engine will not run code from other versions of LabVIEW, so the LabVIEW 2012 f3 RTE will not run LabVIEW 2011. 
    This is why you don't to have multiple runtimes within the same version of LabVIEW (you don't need a LabVIEW 2012 f3 RTE and a f2 RTE for example).
    mattvx wrote:
    I doubt it's anything to do with the builds themselves. All these exes worked before I patched to f3. Also I checked and I'm missing those files that the f2 patch supposedly removes. 
    C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2012\tdtable.tdr
    C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2012\English\lvapps.rsc
    But I think I went straight from f1 to f3 so I'm not sure how they got removed. Is it possible to just copy those files from another computer? Thanks.
    This behavior can happen if the LabVIEW Run Time Engine is in use while the f1 patch is installed and then again when a later patch is installed. The reason this was a problem with the f2 patch was that LabVIEW 2012 ships with the  "Variable Web Service" which uses the RTE even if all other applications have been closed. Thus in certain circumstances the f2 patch would remove those two files. We removed the f2 patch from circulation and issued the f3 patch which will restore the missing files (and adds some other fixes). The f3 patch also gets around the variable web service so that the RTE is not in use while the patch is being installed.
    You went directly from the f1 patch to the f3 patch, which is entirely fine. 
    However, you can get into this state if you install a patch while the RTE is in use and then install a second patch to the same version of LabVIEW later while the RTE is again in use. The RTE must be in use during both installations for the files to be removed. This is not new to LabVIEW 2012 and can occur with any version of LabVIEW. Examples of things that use the RTE are the Example Finder, built executables, or certain web services (no web services ship with LabVIEW that are dependent on the RTE)
    To prevent this - follow the installer instructions and close down programs that are using the RTE during the patch install process (close down all NI software and any built executables that are running).
    If you do experience this - a repair installation of LabVIEW or an installation of a later patch will repopulate the missing files.
    Hopefully that clears this up a little bit!
    Regards,

  • I Have a HP Photosmart Premium Fax all in one  C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

    I Have a  printer HP Photosmart Premium Fax all in one  C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

    Did you install the latest drivers?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3 737195&

  • I get an error 7 (Windows error 126) when I try to open itunes. It says that it wasn't installed correctly. I have removed and reinstalled this program and all accompanied programs several times. My itunes was fine until I did an update several months ago

    Please help. I have been using itunes with my ipod nano for years. Several months ago I did a requested upgrade and have not been able to open itunes since. I get an error message that says that itunes was not installed correctly. Error 7 (Windows error 126) I have tried to uninstall all Apple programs and reinstall itunes several times and it doesn't work. I keep getting the same message. I am looking for a solution to get my library back so I can but more songs for my ipod.

    I have same problem--did you ever find a solution?

Maybe you are looking for