All Cells are Not getting Background Color in WAD

Hello All,
I have a query with 29 Columns and Nearly 1000 Rows.
This query is being displayed through WAD.
I have used  com.sap.ip.bi.rig.Format to color different columns : e.g.
1st - 8th column -> Color Green
9th - 10th -> Color Red etc.
Also, in the Analysis Web Item properties, the values are:
BLOCK_COLUMN_SIZE = 50
BLOCK_COLUMNS_STEP_SIZE = 1
BLOCK_ROWS_SIZE = 1000
BLOCK_ROWS_STEP_SIZE = 0
My Issue: For all columns , a few of the Cells are not getting colured. They are absolutely random.
When I reduce the data volume (restrict to some region), all the columns are properly colured.
Please Help to fix the issue.
Thanks,
Mainak

Closing the thread as seems below note answers my query:
1648692  Modification Format styles not applied on huge result set
Thanks,
Mainak

Similar Messages

  • E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
    LN

  • All Records are not getting displayed in adobe form from table

    Hi All,
    I Want to display records from table  to Adobe Form Table .
    But While Displaying only some of the records are getting displayed How can i display all the records in next pages of adobe form.
    Its Urgent PLZ Reploy soon.
    Thanks & Regards
       Kiran

    dear friend,
    please check the adobe format, must be match to
    the data base format.
    pls go to the setting and adjust the data base table.
    if nothing is going click the radio button
    html format.
    that will work.
    rewards are expecting.
    vivek

  • Reg:tasks are not getting displayed in the uwl mss for particular user

    hi all
    Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
    Thanks in advance.
    Deepika

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • Portal Forms are not getting displayed in the new oracle environment.

    Hi All,
    The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
    Regards,
    Tom

    Hi ,
    Based on the requirement , check whether the customer contact has been done carried out for the invoice  , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • While Creation Of SaleOrder Char Values are not getting saved.(V C)

    Hi SAP gurus,
    One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
    Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
    Awaiting for your valuable reply.
    Cheers,
    Kumar.S

    Kumar ,
    If you assign values in classification view or configuration profile  they will become default for the product, and it willnot be changed in sales order.
    another thing if the item category is incorrect you will not get the configuration pop up at all .
    problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
    If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
    see the result of configuration before saving the sales order , i hoep it will work for you.
    I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
    Check and revert back.
    Regards
    Ritesh

  • The agents are not getting determined

    Hi Gurus,
    In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
    Below are the steps followed:
    We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
    We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

    Hi,
    Kindly Diagnose your WF:-
    Use the following transaction:-
    1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
    2> SWEL -> DISPLAY EVENT TRACE
    3> SWUD -> WF DIAGNOSTICS
    4> SWPR -> WORKFLOW RESTART AFTER ERROR
    Enter the WF Number and Click on the LOG Icon.
    There you can see the Graphical Log of the WF to know where the WF is stuck.
    And You can also check the Technical Details of the WF there, to find which WF Container has what value.
    In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
    Kindly check and revert back, so that a solution can be provided.
    Regards,
    Kanika

  • Images from KM are not getting displayed in EP

    Hi All,
    I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing.
    Location of the Images that I received from EP is mentioned below.
    http://hostname:port no./irj/go/km/docs/documents/HP_Images/Image_123.jpg
    Images are available in the location in the below mentioned path as .jpg files:-
    http://hostname:port no./irj/go/km/documents/HP_Images/Image_123.jpg
    Difference in both is a DOCS folder missing in between........
    Is this is the reason for the image not getting displayed?
    Anything more has to be done in KM part to display these images?
    May I know how to solve this issue??
    Regards,
    Athulya

    Hi,
    the right path look like this: /irj/go/km/docs/<path_to_document>.
    You may have to check you URL generator service settings. Here:
    Configuration - Content Management - Global Services - URL Generator Service(advanced section)
    and then have a look for example for the following values "Content Access Path:" and "Viewer:" normally they both have same value "/irj/go/km/docs".
    Hope that will help.
    best regards,
    --epexpert

  • How come the images are not getting displayed in ie?

    Hi,
    In my application i have a page where the thumbnails
    representing the videos uploaded into the site should be
    displayed.These imgaes are getting displayed in mozilla properly,
    but when it comes to ie 7 they are not getting displayed..instead
    iam getting a broken image.Please suggest me a solution.Thanks in
    advance.

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Stock transfer PRs are not getting created in APO

    Hi,
    I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
    In CIF post processing these PRs as stuck and  I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
    How to de-bug this post processing queue to see what is missing in vendor master data?
    regards,
    shan

    Hi
    Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
    In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
    Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
    You need to have a purchasing info record(ME11) linking your material and the source plant B.
    I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
    Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
    When you transfer the purchasing info record, system automatically generates the external procurement relationships with  source location as plant B, destination location as plant A and info record reference.
    When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
    So in essence you have to check if all the above things are done by the system.
    Hope Im clear in this
    regards
    Mohan V R Chunchu

  • Write Statements are not getting Displayed

    Hi All,
    We are going for Upgrade from 4.7 to ECC. So, in my program we have few write statements which are not getting displayed in the output. Those write statments are seen as errors in the extended check as Char. strings w/o text elements will not be translated: 'Income Tax Worksheet'.
    Could any one please help me to over come this errors and Display the wite statements.
    Thanks
    Shashikanth

    Have you mapped the checked and unchecked glyphs to be used?
    Check the doc and blog for check boxes.
    Regards
    tim

  • Pictogram in EP 7.4 are not getting displayed.

    Hi Everyone
    We have installed 7.4 and export the roles of portal 7.01 to 7.4 however the pictograms are not getting displayed.
    We copied all the images manually from old path to the new one but still its broken using:
    In the content administration >> web resource repository. In the tree find the folder "pictograms" right click on it and upload all of the pictograms
    We followed the note 1753605 but that didnt help too.
    I have checked this link:
    Managing Pictograms in the Web Resource Repository - Portal - SAP Library
    What is the cause of this error?
    The system take the picture resource for show the pictograms that show the screen of ESS.
    Thanks
    Regards

    Hi Samuli.
    We are working with AIX.
    The Path /usr/sap/<SID>/J<SYSNR>/
    j2ee/cluster/apps/sap.com/pcui_gp~xssutils exist , however the directory Components/com.sap.xss.ser.xssmenu.vc.areagroup.VcXssMenuAreaGroup not exist and we have created the folders. and in thie new folder copied the pictograms , however the issue continue.
    http://pbmdebddpd02.bancolombia.corp:50000/webdynpro/resources/sap.com/pcui_gp~xssutils/Components/com.sap.xss.ser.xssmenu.vc.areagroup.VcXssMenuAreaGroup/hcm_beneficios.gif
    We have tested the url and this system genera the following error
    http://hostname:port/webdynpro/resources/
    Thanks
    Regards

  • Chnages in the Graph properties are not getting reflected in the Browser.

    Hi,
    I have made some changes in the Graph properties in web template,
    Eg. : 1. change in color of a series for a columnar type graph
             2.change in the Text properties of Graph Series..
    When I save the template and try to run in the Browser, these changes are not getting reflected.
    Can anybody help me in this aspect ?
    Thanks.
    Regards.
    Amol Bade

    Same here :´(
    Thanks In Advance
    Juan

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

Maybe you are looking for