All Communication Channels stopped or startet when restart of the SAP-PI

is there any way to control the Communication Channels (to be startet or to be stopped during the next SAP-PI system start) while the SAP-PI is not running.
for a special data migration reason, we have stopped all Communication Channels except one Comm.channel.
after finishing the migration and for a backup, we shut down the SAP-PI system.
for the next SAP-PI system start, all of the Communication Channels should be run again.
is there any way to control (to be startet again for the next SAP-PI system start) the Communication Channels while the SAP-PI system is already shut down
or is the only possible way to start the SAP-PI system, and then manually start the needed Communication Channels.

Hi,
If you bring PI server down then all the channels will automatically stop and you can not control these channels when the server is down.You can again start these channels when the server is up and running.....
Regards,
Naveen

Similar Messages

  • Communication Channel Stop and Start

    Hello everyone,
    We are using XI along with MQ for queing messages to our 3rd party logistics. Due to some issues happened in the past, it is decided to stop and restart the MQ channels every weekend. Now the problem is, when the MQ is down, some of the XI communication channels will go down,  and will not start automatically, when the MQ bounces back. Now this had created a manual activity every weekend to stop and start all communication channels.
    Question is, is there any way we can schedule it as a job to stop and start the channels, at a specific time ?

    Hi!
    It is possible in scheduling the messages in XI...
    1.  But before doing this make sure that at what time you want to be schedule ?
    2.  Is that time will be uniform for every week or else is it may varies ?
    3.  If Uniform please make schedule or else if it is varying note the difference between those timings I mean
         If your Messages are flowing for every Tuesday and also every Thursday...., etc..
    4.  You can schedule what ever may be the time it is suppose if those timings are varying weekly once a
         day but in that single day or next day if it was more than once..then better scheduling the
          communication channels to be start for and to be process for that particular 2 days and remaining days
          it wont work I mean stopping Cc
    5. Now when come to process...in scheduling...
    a) Click RWB>Component Monitoring>Communication Channel monitoiing
    b) Right side u can check Availability TIme planning option click that..a seperate window will opens
        THere u can observe these options..
    c) also u can see the log
    I hope it will be useful to you...
    Availability plan--> ONCE /DIALY / WEEKLY/ MONTHLY based on your req select any one...
    Create: to create the scheduling...
    change: to change the existing one
    Save: to save
    Reset if u want toreset alll
    Delete and copy also as u know these..
    While creating you can again see these options 3 main TABS
    details:  --> Corresponding details
    CC: select ur chanel
    OPTION 2
    In XI 3.O you can directly do scheduling there after selecting the radio button of any Comunication channel and there adjacent to Audit log u can see availability time plan other than rt side top corder..
    I hope it will be useful to u
    Regards
    Amar Srinivas Eli

  • Disabling all communication channels before starting XI

    We are mirroring our XI system for DR purposes and I need to work out how to stop XI from retrieving and delivering messages when I start it up.  I want to be able start up the DR system on the same network to check that it looks OK, but with all communication channels disabled (or stopped!).
    Does anybody know how to do this?
    Regards,
    Jason

    Hello All,
    Sorry for opening a topic that is very old but every google search ends up here.
    Run the script to set the channels to “STOPPED” state:
    update [<SID>].[SAP<SID>DB].[XI_AF_ADM_STATE] set ACTIVATION_STATE = 'STOPPED';
    This the script below will set the History of the communication channels to STOPPED:
    update [<SID>].[SAP<SID>DB].[XI_AF_ADM_STATEHIS] set ACTIVATION_STATE = 'STOPPED';
    This will set the automatic scheduled communication channels schedule to disabled:
    update [<SID>].[SAP<SID>DB].[[XI_AF_ADM_SCHEDULE] set ENABLED = '0';
    Next for disabling new incoming messages. Disable the Integration Engine (Set ENTRY LOCK to 1):
    if exists (select * from <SID>.<sid>.[SXMSCONFVL] where CLIENT = '200' and AREA = 'RUNTIME' and PARAM = 'ENTRY_LOCK')
    update <SID>.<sid>.[SXMSCONFVL] set VALUE = '0' where CLIENT = '200' and AREA = 'RUNTIME' and PARAM = 'ENTRY_LOCK';
    else
    insert into <SID>.<sid>.[SXMSCONFVL] (CLIENT, AREA, PARAM, SUBPARAM, GENERIC, VALUE, CHGTSTAMP, CHGUSER)
    VALUES ('200', 'RUNTIME', 'ENTRY_LOCK', '', '0', '1', '20131206011316.8280000', 'DDIC');
    The following will disable the abap RFC's:
    update [SID].[sid].[RFCDES] set RFCOPTIONS = REPLACE(RFCOPTIONS,'N=','N=#') where RFCTYPE = 'T';
    update [SID].[sid].[RFCDES] set RFCOPTIONS = REPLACE(RFCOPTIONS,'H=','H=#') where RFCTYPE = '3';
    Replace <SID> with the sap<sid>.
    Keep in mind that the mail is still being send out when you start SAP.
    To active the Integration Server for incoming messages:
    f you have locked the Integration Server for incoming messages, open it by calling the transaction Integration Engine - Administration (SXMB_ADM) and choosing Integration Engine Configuration    Specific Configuration   Change New Entries  . Select the category RUNTIME and then the parameter ENTRY LOCK: Set the current value to 0 (NOT LOCKED) and choose Save
    The message in the queues are still being processed.
    For the full Start/Stop procedure check:
    Starting and Stopping - Administering PI (Process Integration) - SAP Library
    Greets,
    Stan

  • JDBC Sender Communication channel stop working

    Hi all,
    I'm facing with a strange problem: I have a db to db scenario (SQL server to Oracle) that has been tested and that was working properly.
    But when we started again our tests after some days, without doing any change, the flow didn't start anymore. The problem is in the sender jdbc communication channel:
    creating it again with a NEW NAME, and changing the configuration the flow starts again. I try to explain the checks that I did:
    - from the runtime workbench the adapter looks ok: green and making polling to the db (obviously without select any record even if we were sure that the select condition was satisfied by some records).
    - I tried to simulate some changes re-activating the communication channel.
    - clear cache
    Nothing was working,the only solution was to re-create the cc with a new name (deleting the old one and creating a new one with the same name is not working as well). But we cannot consider this solution in a production system.
    I have several scenarios like this and this problem happened three times in some months and every time with the jdbc sender from SQL server (never with the sender from Oracle).
    There is someone that has any suggestion?
    Thanks in advance,
    Luciana Agostini

    Hi Luciana,
    There is nothing that you could do in PI that could help because most of the places where there could be a problem like cache or with adapter statuses you have already looked into . For the sake of a second opinion see what prateek srivastava has to say.
    Basically a n/w connection problem or at the SQL db level.
    Rgds
    joel

  • A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem.

    A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem, and this magazine's app opens just fine on my wife's iPad.
    I have deleted the app and reinstalled it from the Apple store and that makes no difference.  I have also done a hard reboot on my iPad with no result.
    Any thoughts about what might be wrong? 

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one.

    For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one. Help?

    Hi
    I would trash - iMovie pref file - and re-try - sounds like this got faulty.
    • Delete iMovie pref. file. iMovie pref. file resides.
    Mac Hard Disk (start-up HD) / Users / "Your account" / Library / Preferences
    and is named. (one or more of these)
    com.apple.iMovie.plist
    com.apple.iMovie3.plist
    com.apple.iMovie7.plist
    com.apple.iMovie8.plist
    com.apple.iMovie9.plist
    com.apple.iMovieApp.plist
    and find
    com.apple.iApps.plist
    While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
    Now restart iMovie.
    If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
    ( It can be done like this: Open Terminal, then enter:
    chflags nohidden ~/Library (exactly like this - space included)
    Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
    Yours Bengt W

  • I bought acrobat adobe professtional version II in 2012.  Now I re-download this software to my new computer.  All info was downloaded.  But when I oopened the file, I need to verify the serial number.  It showed up that the serial number is valid, but th

    I bought acrobat adobe professtional version II in 2012.  Now I re-download this software to my new computer.  All info was downloaded.  But when I opened the file, I need to verify the serial number.  I entered.  But it showed up that the serial number is valid, but the qualifying product could not be found.  I could not be able to find Ver 11 from the list.  What can I do?

    The qualifying product is the older version that you owned before you purchased the upgrade to version.  It is what qualifies you to use the less expensive upgrade version.  So you need to select the older version and provide its serial number to prove that you qualify for using the upgrade.
    Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

  • My form was created by FormsCentral.  I save as a PDF and emailed it to all of my club members.  When they complete the form, save it, and email it back to me, I get a blank form. Why?

    My form was created by FormsCentral.  I save as a PDF and emailed it to all of my club members.  When they complete the form, save it, and email it back to me, I get a blank form. Why?

    If you had iCloud backup turned on, and it made a backup - yes.  If you didn't have iCloud backup turned on - but were using iCloud for Contacts, calendars, etc.  You will get the contacts and calendars, etc back.
    Purchases made with your appleID can be redownloaded as long as they are still available in the iTunes store.
    If you connected your phone to a computer with iTunes, there may be a backup on there as well.

  • Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

    every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

    I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
    I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
    So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
    Every voice helps

  • Hi, my 2 kids have 2 different ipod touches all under my itunes account.  when they play the same game/app, it sees them as one player.  is there any way to separate their progress without giving us all different itune accounts?

    Hi, my 2 kids have 2 different ipod touches all under my itunes account.  when they play the same game/app, it sees them as one player.  is there any way to separate their progress without giving us all different itune accounts?

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

    Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

    You can click on the text that says 'processing' in the main windows and it will open (toggle) the Activity Window, (can also be accessed via the Window menu -> Show Activity.
    It will tell you what Aperture is doing with more precision and perhaps even how many photos it still needs to process. It is generally best to wait until all that processing is done before you start working with the photos (well it is best to first turn of options what you dont want to use, perhaps Faces or Previews and then let it process the new photos).

  • All Communications Channels go to red status.

    Hello Folks,
    We are on PI .0 SP 19.
    I see a repeated problem in our system. All our communications channels go to red status every two weeks. During this time there is a disruption in our services....
    I noticed that many of the service nodes goes to red....
    The systems seems to come up only when all service nodes are restarted or the entire Java service is restarted...this seems to happen every 2 weeks...
    I am not sure what is causing all our channels to go into error status at once. Would appreciate it someone advices me on how to investigate this problem furter...
    Has anyone faced similar problems before??
    Regards
    Arvind

    Mine is only an idea...
    However, i don't know so much about java memory space... but for tablespace, you can look this document:
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a71c8505211d189550000e829fbbd/content.htm

  • Sender communication channel stopped after error "Connection Timed Out"

    Hi experts,
    in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
    Yesterday evening a "Connection Timed Out" error came.
    After this error the polling stopped but channel in communication channel monitoring still remains green.
    So status green but no polling.
    To solve this problem we stopped and then restarted channel from CC monitoring.
    The channel is configured "manually".
    The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
    After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
    Thanks
    Fabio Boni

    HI,
    I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
    Thanks
    Fabio

  • File sender communication channel stop working

    Hi Guru,
    I have a file sender communication channel. It usually works good. But sometimes it just stop working. And In RWB, it shows no error. If I stop it and restart it in RWB, it immediately works again. This happens once a while. Any ideas?
    Thanks,
    Meiying

    Hi,
    option 1--
    Do some dummy changes and activate channel and try and perform cache refresh.
    If still not working then  stop and restart SFTP service,if still no luck then restart JAVA stack
    option 2
    try to put timeout value in the channel.
    Regards.
    Mastan

  • One communication channel with 2 cluster node functioning at the same time

    Hi Gurus,
    We have PI 7.1 installed in a HA environment, which includes  two servers.
    server A: ASCSSCSDBERSAAS
    server B: ERS + PAS
    and we can see a jdbc channel in the communication channel monitoring, and along with the CC there are two cluster ID available,both of which are showing green -- functioning.
    now the issue is the process is actually not started because there is no processing details, and  when we stop the CC and then start, nothing happens, but there are still 2 green nights, seems very strange.
    does any one have such experience and how can make these two nodes work well?
    Thanks.

    Probably they use an older version of alsa that doesn't have dmix enabled by default.
    Have a read through: http://gentoo-wiki.com/HOWTO_ALSA_Compl … ix%29#dmix
    Perhaps it will help.

Maybe you are looking for