All of a sudden my laptop does not receive mail. Got any ideas?
Cannot receceive new mail messages. OS 10.7.3. just started.
Hey,
is this an IMAP account, and can you send emails?
Jb
Similar Messages
-
I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?
Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.
-
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have had FPCX since Sept, first used Oct. I have not had one 'movie' export properly, first time since using FPCX. Audio stops completely at some point and does not re-start. Any ideas, folks?
First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
You could also list any relevant error messages you encounter.
What version of FCP X are you using?
All these things will make it easier for people to help you.
Andy -
I recently purchased an album from itunes. When I subsequently sync'ed my ipod touch I ended up with all tracks of that album doubled on my ipod and I lost all my playlists. Subsequent syncing has not fixed it. Any ideas what to try?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem. -
Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?
Sounds a bit like the Power Supply, but...
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939 -
My onscreen remote for sling player on my I-Pad does not respond correctly. Any ideas?
My onscreen remote for sling player on my I-Pad does not respond correctly. Any ideas?
Do you have access to an Apple Store? If so, make an appointment at the genius bar and show them the problem and maybe ask them to run a hardware test. Since you just reinstalled the OS, that should rule out a software issue.
It can be hard to troubleshoot over the phone. It may be easier to find the problem if someone can look at your Mac in person and see what it is doing.
Good luck! -
My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards languages the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?
The keyboard doesn't normally play any role in Apple apps regarding spellcheck. That is determined by system prefs/keyboard/text/spelling. Go the setup item at the bottom of the list and make sure that British English and Spanish are the only two boxes checked, and then set it to Automatic. How well it works varies a lot. You may also need to check Edit > Spelling and Grammar > Show Spelling and Grammar.
If you are still using Pages 4, spellcheck is determined by Inspector > Text > More > Language. Make sure that is set to the right thing for what you want to do. -
All of a sudden my computer does not recognize any of my printers. Why?
All of a sudden I cannot print anything because of my two (2) printers running, it says that they are not recognized. It keeps saying that I need a printer to print or to restart my print spooler. What is this all about? I run a business off of this as well.
Start by trying this utility - Print Diagnostic Utility.
If you need any more help, please provide:
the product number(s) of your printer(s)
the operating system on your computer
how your printer is connected
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - - -
When trying to access the shared iTunes library of my Macbook Pro on my iPad(iOS 5.1) the TV Shows are all mixed up. Some shows are not even displayed. The same library display normally via my Apple TV. It appears that iPad using iOS 5 has lost the ability to recoginize that TV Shows have a main show title followed by a number of episodes eg., 'Top Gear', Season 17, Episode 1 to 6, and 'Modern Marvels', Vol lll, Episodes 1 to 16. This has to be a glitch with iOS 5 as it was working fine in previous OS versions.
Does anyone know if Apple is aware of this anomally or is there a work-around? ThanksPerhaps you should ask over in the iPad community, you may get better answers there.
It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
psoon, here's a link to the iPad community:
Using iPad -
My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Most of the time says unable to join network? My laptop and ipad seem fine? Very annoying Please help!
All the information you need is right here: http://www.apple.com/iphone/specs.html
Notice there is no mention of WiMax.
It doesn't really matter anyway as Sprint is rolling their WiMax network down for use by MVNOs. Actual Sprint customers will not have access to WiMax at all. It was a failed experiment. -
Trying to download adobe program adobe photoshop CS5 Optional Automate Plug-ins, but get a message that it does not contain valid signature and it won't install the app. Can someone help with this please? Trying to reach Adobe by phone is impossible.
evFirst, have you installed all the updates for photoshop cs5 by going to Help>Updates from within photoshop cs5?
The automated installer only installs the following plugins:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4965
The following plug-ins and associated files are available via an installer:
Automate Plug-Ins:
• Contact Sheet II
• Picture Package (ContactSheetII)
• Web Photo Gallery (WebContactSheetII) plus presets
• Script for Layer Comps to Web Photo Gallery
Other Optional Plug-Ins:
• TWAIN
Other plugins including the pattern maker plugin need to be installed manually using this download:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4964 -
Create a UM mailbox that does not receive mails and doesn't record voicemails
Hi,
I want to create special UM mailboxes that only serve as announcements. These mailboxes should NOT receive any mails but more importantly, should not offer to record any voicemail.
I found several resources online to achieve part of what I want, but I can't find a way to create a mailbox (or auto-attendant) that does not accept to record voicemail.
Could any one help me out with that? Is it possible at all?
I'm running Exchange 2010.
Thank you very much in advance.Let me clarify my request.
I want an emergency announcement number. I have an internal number, let's say 950. I want to be able to forward calls to that internal extension, and when people call it, I want them to hear an announcement that says, for example "office is exceptionally
closed today", then does NOT offer to the caller to record a message. It can hang up, or simply stay silent until the caller hangs up, that doesn't really matter.
This was a very easy thing to do on the old Cisco Unity voicemail system I am used to. Now that I'm discovering Unified Messaging, I have been struggling with that for hours.
I have found this article on technet blog which goes exactly in the direction I want:
http://blogs.technet.com/b/ucedsg/archive/2010/04/12/office-closure-and-exchange-unified-messaging.aspx
It says in the opening paragraph: "This scenario also needs to be configured so that the Mailbox which is setup for this is not setup to accept any voicemail messages."
This is EXACTLY what I need but problem: the issue is not addressed at all in the blog post! Or I am missing something obvious.
Thank you for your help :) -
Ultimate commit does not get made. Any ideas
Hi Folks.
I have written the following program unit. This is fired from a WHEN-CHECKBOX-CHANGED trigger in my form.
If I happilly click a checkbox on and off several times the program unit works fine, making changes and then undoing them.
The only thing it does not do is make the final call to UPDATE_SESSION_LOG.
Eg.
If I check and uncheck the same checkbox 5 times then all the changes to the required tables are made correctly apart from the final call to UPDATE_SESSION_LOG which seems to get missed. Both program units are listed below.
Please post a reply with any sugggestions.
Cheers
Simon
PROCEDURE ASSIGN_UNASSIGN_PU_P IS
v_check NUMBER(1);
v_payment_ref VARCHAR2(80);
v_payment_date DATE;
v_payment_amount NUMBER(12,4);
v_payment_currency CHAR(3);
v_payment_status NUMBER(1);
v_invoice_number CHAR(18);
v_running_total NUMBER(12,4);
v_user CHAR(10);
BEGIN
v_check := NULL;
v_check := :POSITION_ASSIGN_CANDIDATE.ASSIGNED;
v_user := GET_APPLICATION_PROPERTY(USERNAME);
IF v_check = 1 THEN -- Invoice marked as paid
v_payment_ref := :POSITION_ASSIGN_SUMMARY.PAYMENT_REF;
v_payment_date := :POSITION_ASSIGN_SUMMARY.PAYMENT_DATE;
v_payment_amount := :POSITION_ASSIGN_SUMMARY.PAYMENT_AMOUNT;
v_payment_currency := :POSITION_ASSIGN_SUMMARY.PAYMENT_CURRENCY;
v_payment_status := 1;
v_invoice_number := :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_NO;
UPDATE SETTLEMENTS
SET PAYMENT_REFERENCE = v_payment_ref,
PAYMENT_DATE = v_payment_date,
PAYMENT_AMOUNT = v_payment_amount,
PAYMENT_CURRENCY = v_payment_currency,
PAYMENT_STATUS = v_payment_status
WHERE UCL_INVOICE_NO = v_invoice_number;
:SCB_TRANSACTIONS.PROCESSING_STATUS := 2;
:CONTROL.TOTAL_SELECTED := :CONTROL.TOTAL_SELECTED + :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_AMOUNT;
SYNCHRONIZE;
COMMIT;
UPDATE_SESSION_LOG('Assigned', 'Ref '||SUBSTR(:POSITION_ASSIGN_SUMMARY.PAYMENT_REF,1,65), v_invoice_number, SUBSTR(v_invoice_number,1,5), SUBSTR(v_invoice_number,7,5), v_user, SYSDATE, NULL);
ELSIF v_check = 0 THEN -- Invoice being marked as unpaid;
v_payment_ref := NULL;
v_payment_date := NULL;
v_payment_amount := NULL;
v_payment_currency := NULL;
v_payment_status := 0;
v_invoice_number := :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_NO;
UPDATE SETTLEMENTS
SET PAYMENT_REFERENCE = v_payment_ref,
PAYMENT_DATE = v_payment_date,
PAYMENT_AMOUNT = v_payment_amount,
PAYMENT_CURRENCY = v_payment_currency,
PAYMENT_STATUS = v_payment_status
WHERE UCL_INVOICE_NO = v_invoice_number;
:SCB_TRANSACTIONS.PROCESSING_STATUS := 1;
:CONTROL.TOTAL_SELECTED := :CONTROL.TOTAL_SELECTED - :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_AMOUNT;
SYNCHRONIZE;
COMMIT;
UPDATE_SESSION_LOG('Unassigned', 'Ref '||SUBSTR(:POSITION_ASSIGN_SUMMARY.PAYMENT_REF,1,65), v_invoice_number, SUBSTR(v_invoice_number,1,5), SUBSTR(v_invoice_number,7,5), v_user, SYSDATE, NULL);
END IF;
END;
PROCEDURE update_session_log (module varchar2, description varchar2, invoice_no char, pmn char, p_pmn char, aUser char, aDate DATE, period char) IS
the_user varchar2(10);
the_date DATE;
BEGIN
the_user := Get_Application_Property(USERNAME);
the_date := SYSDATE;
INSERT
INTO OPS_LOG_SESSION
VALUES
module,
description,
invoice_no,
pmn,
p_pmn,
the_user,
the_date,
period
COMMIT;Hey Lozzerg,
Thanks for the question. I understand that you are having issues send email on your iPad Air. The following resource outlines troubleshoot steps that may lead to a resolution:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M. -
Windows 7 (32) itunes 8.0.2 does not recognise ipod touch - any ideas?
trying windows 7 beta, upgrading from vista, most things work fine but when I plug my ipod in itunes does not see it any more. Windows 7 just shows it as an unspecified device, not browsable or anything. Tried re-installing itunes, re-booting etc, doesnt make any difference - my music library etc is still OK, it just doesnt see my ipod touch. Does anyone have any ideas on this please? Thanks.
http://support.apple.com/kb/TS1567
Maybe you are looking for
-
hello i am very new to apple ,but i,m a little frustrated as for one thing i dont have iphoto so i cannot work or print photos also i have a applebook pro and whith that i have bought a pre paid mobilebroad band usb the booklet says it is compatable
-
FLVPlayback issue loading RTMP stream
Hi, I'm currently having a problem with FLVPlayback refusing to play a stream from a certain site. The flvplayback was playing streams from a different remote site fine, the stream that it is attempting to play work in other AS2 FLVPlayback component
-
Upgrading from 7.5 to version 8: Web and Email Collaboration problem
Hi All; To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing ! To go through all the web collaboration objects and remove it one after one is something not possible, special w
-
Torch 9800 Bluetooth pairs to everything except Blackberry desktop software
I've got the 6.0 bundle 2475 desktop software. My Blackberry Torch is paired to my new HP G72 laptop, running Windows 7 64, via bluetooth. To test that it is actually functional I've backed up my BB from Windows, and seen the file transferred via blu
-
Is it possible to change nunmber of columns dynamically in table control
Is it possible to change number of columns dynamically in table control? if so how it could be done? Thnaks in advance. Sounder