All users can not see some of  BPA 'free attributes' in process models

All,
We are using BPA 10134 to model processes.We have a very strange issue
When we login using a particular user from particular machine we can see following attributes for a human task
USer Attribute Text1
User Attribute Text2
User Attribute Text3
but when we login using other user, we could not see same attributes for process models
Anybody has any idea what are we missing ?
Regards,
Praveen

Hi Ashish,
I am new to BPA. So I am really not sure what filters means and how to setup.
Anyway I will do bit explore and try to resolve it.If you have any nice article on BPA filters please post here
regards,
Praveen

Similar Messages

  • I can not see some pages

    Hi!
    I very rarely happens, I have an iMac 27 "and I can not see some pages.
    On the contrary I can see all the pages on my MacBook Pro.
    Both computers are in the same table with the same wifi.
    In Safari "I think" have the same configuration but it has to be no.
    How I can see the pages on my iMac if I look at the MacBook Pro?
    Thank you!
    PS: sorry my english

         Power cycle
         Power off the router. Unplug it from the wall. Wait a while.
         Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
         It will take a   while.
         Restart the computer.
         Start up in Safe Mode
         http://support.apple.com/kb/PH11212

  • I can not see some dvd films .. couldn t open dvd films..

    i can not see some dvd films .. couldn t open dvd films..

    so you inserted dvd and couldn t open them .. got to be more specific .. which films, what else is happening ..

  • Why one user can not see plan output for some orgs while other users can?

    We have several inventory/planning orgs. Suddenly one of the users is not seeing any plan output for some organizations. While other users are able to see plan out (planner workbench) for all org.
    All users use the same responsibility.
    Deleted all the folders to eliminate hidden query in default folder.
    Any other thoughts?
    Edited by: 918894 on May 5, 2013 10:22 PM

    The issue is resolved.
    In the user preferences, one user has Inventory Category Set and other user has Planning Category Set as the default. Items belonging to one Org were not assigned Planning Category Set. Thus they were not showing for the other user.
    Thanks for the response.

  • Other user can not see the data from the workbook

    Hi Friends,
    I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
    By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
    Any body happen to know the cause or has some ideas on this issue?
    The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
    Thank you very much,
    J.K

    Hi All
    The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
    GRANT SELECT ON SYS.V_$PARAMETER
    GRANT EXECUTE ON SYS.DBMS_JOB
    The user will also need to have these grants:
    CREATE PROCEDURE,
    CREATE TABLE,
    CREATE VIEW,
    EXECUTE ANY PROCEDURE,
    UNLIMITED TABLESPACE on user's tablespace
    My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
    http://learndiscoverer.com/books/books.htm
    The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
    By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
    Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
    Collect Query Statistics
    Item Drill
    Drill Out
    My advanced VIEWER has this additional privilege:
    Save Workbooks to Database
    My basic PLUS user has all of the above, plus these (pardon the pun):
    Create/Edit Query
    Create Link
    and my advanced PLUS users get everything, which means they now get these as well:
    Grant Workbook
    Schedule Workbooks
    I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
    Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
    I hope this helps
    Regards
    Micahael Armstrong-Smith

  • Can not see some videos, Can not install Activex 9.o47

    My name is Alex, I have been working on getting flash to play
    for about 3 weeks.
    I have uninstalled both shockwave and flash many many times
    using all different sites. I have turned off my firewall,
    anti spy, and antivirus when downloading. I have shut
    everything down that was running. I have closed everything.
    I have restarted each time between downloads. I have then
    downloaded the install from many many sites. Closed everything, and
    installed.
    I have uninstalled from ADD/Remove. I have reinstalled. Now,
    when I go to ADD/Remove programs it shows that both Flash and
    Shockwave are there.
    Seriously, I have downloaded and uninstalled and installed so
    many times from so many sites.
    Each time the screen shows I have done it successfully. But I
    cannot get it to play. I have turned off all popup blockers that I
    know of.
    I still run my anti virus, firewall spyware etc. But says
    there is nothing to prevent Flash from playing some of the pages I
    use to see.
    I have done a Reg clean. And I have installed after all that
    and still does not work.
    I am the admin on the computer and I am the only one who runs
    it. I use firefox for my browser but I tried to get it in IE and
    still nothing.
    Everything was going absolutely fine till I done the stupid
    mistake of updating my Flash player,
    seen then my computer is going banana, I don't understand why
    is that,
    I can actually see U tube videos, but I can not see other
    videos like trailers from IMDB, <Your browser is blocking
    display of our video player. If you would like to see the video,
    please turn off any ad-blocking or Flash-blocking software that you
    are using>.
    That's what he said on the screen where the video suppose to
    play, I can only see advertising, It should be the other way
    around,
    and even the news on yahoo I can not see them, only ads.
    I had no problems before, no pop up I could see the videos
    absolutely fine and especially no ADS and then that days,
    I wish I could cancel that day, I'm try to fix this problems
    all ready 3 weeks and nothing, I did try everything but nothing.
    I have download flash Player 9.0.47.0 manage to install but
    found impossible to install Activex 9.0.47.0 seems to be impossible
    I do know why. disinstall everything reinstall but nothing,
    # Select Start.
    # Select Run.
    # Type cmd
    # In the command window, type the following:
    uninstall_flash_player.exe /clean
    The answer is: uninstall_flash_player.exe is not recognised
    as an internal or external command,
    operable program or batch file.
    does not work, try million of time, does not work.
    Does anybody know why?

    You are not the first one to notice..................
    http://forums.adobe.com/thread/748720?tstart=0
    Please do submit a request for it to be changed   www.adobe.com/go/wish

  • Some users can not see the projects screen

    We have a team trying to use project online. Two of us can click on on the projects tab and see the two rows of icons and the projects beneath 3 others get the following :
    Web Part Error: An error has occurred. Correlation ID: 68b7cd9c-207e-1000-a3d4-c2ead0781856. 
    I've reviewed the credentials of those who can see it and those who can not and there are no obvious differences.
    Does anyone have any thoughts on this and/or how I can see the logs on a remote Sharepoint Installation?
    Alan

    Hi Alan,
    Is the error occuring in the Project Center?
    Can you post a screenshot so we can have a better understanding of the issue?
    Since everything looks right for you, can you do a delegation session for the users who have the issue and check if you can see the issue?
    Can they alos try with another browser than IE?
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • User can't see some OID entry from 3rd party ldap browser but OAM?

    Hi All,
    after tried to applied access control to some OID entry, user then can't see that entry from 3rd party ldap browster, and this is a expected behavior, but why the same user can see that entry from user management interface of OAM?
    Regards,
    Makson

    Hi Makson,
    OAM's Identity Server binds to OID as a single user* (typically an OID admin, even orcladmin) and applies only those acl's that have been defined within OAM. So when you login to OAM as end-user X, the Identity Server (eg orcladmin) checks to see what rights within OAM have been defined for User X - but in this scenario any rights defined within OID are not applied to user X. By default, OAM end-users have no access to information in ldap (although the OAM Admins have full access by default).
    Regards,
    Colin
    *Depending on how you are accessing OAM, you may see extra binds in the OID logs when the end-users actually login to OAM.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • I can not see some parts of web pages, some things are visible others not.

    In my mail program most of everything is viewable but the different styles that are available to use above the body of the message are not able to be seen. I can run my mouse over the different spots in the cell to see what that space is but you cant see it. On some web pages that I shop on all the details are available but the buy now button may be doubled and overlapped or just not visible. If I scroll with my mouse over the open areas I can usually find it but not see it. The screen also looks very bright, I've tried to change the colors to try to get the missing data to show but it's been no help. Oh, even now the button to submit this is not visible and the troubleshoot information box is only visible when scrolling over it. Thanks for any help

    See:
    * http://kb.mozillazine.org/Website_colors_are_wrong
    * http://kb.mozillazine.org/Websites_look_wrong

  • Windows user can not see my page

    Hi,
    I was just informed by a friend that he could only see a grey screen when visiting my site www.bfg-kommunikation.de - which i built up using iWeb.
    Same occurs with www.zweiemm.de - another page of mine.
    He uses Windows XP and IE 6.0.
    Does anybody know how that comes and how it can be resolved ?
    Thanks in acvance,
    Peter
    macmini   Mac OS X (10.4.10)  

    Mr. Appleby,
    Unless you've made the corrections in the interim of this response, both sites came up on a Windows XP machine in Firefox 2.0.0.4 and IE 6.0. They are both impressively designed iWeb sites. Unique.

  • I can not see some videos on my apple tv2

    on iTunes they play withouth problems.

    Welcome to the Apple Community.
    Check the format is correct.
    Video formats
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Audio formats supported
    HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through
    Photo formats
    JPEG, GIF, TIFF

  • Some users can't see attributes in the Query Builder

    Hi.
    I have problem. Some users can't see some of attributes of info-object in the Query Designer. Where is the problem?

    I think you would need to give more details on the problem,
    as <b>some</b> users are not able to see <b>some</b> attributes.
    Do they all share the same profile, what is the distinguishing thing among the some users who can see the attributes and the ones who cannot see the attributes.
    Need to drill down further I guess.
    Cheers
    Anurag

  • Can not see the report in report manager/admin tab

    Hi,
    in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
    Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
    Thank you.

    On the administration page, you will be able to see "View Reports For" header on the top.
    Under that header you will see the following fields:
    User ID/Type/Last/Status/Folder /Instance
    Above values will be used by PeopleSoft to filter and display the list of reports
    If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
    If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
    Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

  • I can't see some of my songs

    I 've noticed that some I can not see some of the songs under the artists (these are the ones that have no info in the album column in i-tunes). For example I have about 10 songs from the cure and I can see only one (the one with the album info) when I am searching from artists. On the hand I can find cure's song from songs. Is there any way to fix this problem?
    Thanks in advance

    Hey!
    George read this article.....
    iTunes: Working with ID3 Tags
    Obviously,you need to enter any info such as Band/Artist names exactly the same,ie/if you Type in "The Cure" and then "TheCure" it will be recognized differently.
    Cheers,
    John

  • Can not see my contacts in the "All" list

    Couple of days ago I signed into my skype and I was not able to see any of my contacts in the "All contacts" list. I was able to find the contants in the "Online contacts" list (and they see me in their "All contacts" list. When I open a chat window with any of my online contacts I get the same message: "Name Lastname is not in your contact list." When I click "Add to contacts" button it dissapears but when I close and open the chat window again it comes back, and the contact does not receive the request. I am able to communicate with all my contats, it is just that I can not see any of them in my "All contacts" list. I have tried completely unistalling Skype and then istalling it again but it didn't help, I am also using the latest version.
    Any help would be appriciated.
    Kind regards
    Solved!
    Go to Solution.
    Attachments:
    1.png ‏167 KB

    Sounds very simular to my experience starting yesterday.
    Windows version 7 pro.
    Skype version 7.4.64.102. 
    After a Windows update and reboot yesterday, I found my contact list is blank. I always keep the setting to show ALL contacts. After some quick investigations I have found:
    If I change this setting to show skype contacts, the screen is blank
    If I change this setting to show all contacts, the screen is blank
    I am still getting notifications someone came online, although I cannot see them in the contact list since it is blank.
    I can go to the recent contacts and the screen will populate
    I can change the contacts to only show online and the screen will populate. 
    Signing out and signing back in, doesn't change anything.
    Rebooting the computer doesn't change anything.
    Attachments:
    Capture.JPG ‏60 KB

Maybe you are looking for