Allocating stock to individual sizes

I am currently building my first e-comms site and cannot figure out a way to allocate stock values to individual sizes/colours.
Does anyone know a way to do this please?
Thank you

I don't believe there is currently a way to do that. One workaround is to enter each size as a different product and then use Product Groupings to combine them into one product and allow users to choose which size they want from a drop down.

Similar Messages

  • Report showing Total Stock of individual materials and not specific to Sloc

    Our requirement is to display the current Stock of every individual material with its description and not Storage location specific..
    We dont want the Stock specific to Storage Locations.We need the overall Stock of individual materials.
    Pls dont suggest
    MMBE Stock Overview
    MB52 List of Warehouse Stocks on Hand
    MB53 Display Plant Stock Availability
    MB54 Consignment Stocks
    MB5B Stocks for Posting Date
    MB5W List of Stock Values
    MC.1 INVCO: Plant Anal. Selection: Stock
    MC.5 INVCO: SLoc Anal. Selection, Stock
    MC.9 INVCO: Material Anal.Selection,Stock
    The above doesnt solve my purpose.
    Apperciating ur immediate response.
    Regards
    Zulfikar

    Hi Zulfikar Ali,
                          Develop a Z-Report with help of techinal consultant...........
    regards,
    Patil

  • SAP WM: Pre Allocated Stock

    Hi All
    We have a HU Managed Storage Location in the warehouse. The Storage Type is also SU managed. I want to do pre allocation for the materials that come in. After packing in the Inbound Delivery when I try to create TO, the system gives a warning that the material is pre allocated but then it just suggests the bin as per the putaway strategy (and not per the pre allocation table). The preallocated table LT51 is maintained and mvt type 101 has "consider pre allocated stock" check marked. The problem seems to be that on the TO preparation screen, there is no button for "Pre allocated Stock" and even the menu Goto --> Pre allocated stock is grayed out. In fact Please let me know how I can do pre allocation in this case.
    Thanks
    Apurva

    Hello Apurva,
    Did you get an answer? I'm experiencing the same!
    Regards

  • MRP Exception Message 26: Excess stock in individual segment

    We would like to modify the logic relating to MRP Exception Message 26: Excess stock in individual segment to allow for a material-specific tolerance threshold, within which no exception would be generated.  An alternate approach might be to deactivate  message 26 and create a new custom exception that accomplishes the same thing.
    The reason is that we fabricate and procure a large number of materials in a Make-To-Order environment, with some planned scrap at multiple levels of sub-assembly.  The result is that we often have small residual quantities of components & sub-assemblies in sales order stock when the project is complete.  Some of these may be useful on future projects so we want them to remain in stock, but we donu2019t want them to continually generate exception messages that distract our planners from the exceptions that truly need attention.
    I have tried setting up a storage location that is excluded from MRP, and this works only if the material is in General Stock, but not if it is in Sales Order Stock.
    If anyone knows of a way to either set up an allowed tolerance, or exclude a sales order segment from MRP, please let me know.

    DB49,
    I have previously suggested just what you have indicated (ie. to move the parts back to unrestricted geneeral use stock).  My company's objection is that the materials were either produced or procured for that original sales order and that the costs for these materials are in that sales order as well.  Using a 411E transfer posting will not only move the stock, but also the cost (as if we are buying it back from the sales order).  Since there is no guarantee that we will be able to sell it again, our accounting department will not allow us to do this.
    So the bottom line is:
    We do want to retain visibility to these stocks.
    We don't want the cost for these stocks back on our books
    If the opportunity presents itself, we want to move them to any future sales order for the same material.
    We don't want the hundreds of exception messages for "excess stock in individual segment"
    However we do want to see this message for actively planning sales orders that may have too much stock
    There may be no way to get this, but that is the goal.

  • Missing parts/pre-allocated stock

    Hi all,
    I got a Missing parts/pre-allocated stock table issue, maybe someone can help me out.
    This can be handled via LT51 to fill table T310 MANUALLY. This table will be checked during the creation of the Transfer Order (TO) in case the check is activated for the WM movement type.
    Is there an automatic way to fill this table?
    Is it possible to only create TRs if the stock is not available and TOs automatically from TRs if stock is available?
    Cheers
    Mathias

    Hi Matthias,
    We are in a same situation. Your message was on April. So somehow you should solved the problem. Can you share your solution?
    Best Regards,

  • Maintain pre allocated stock

    Hi ,
    Can anybody tell me what is the exact use of 'maintain pre allocated stock' , Tcode LT51.
    I was trying to do cross docking from 902 to 916. I have setup the 'consider pre allocated stock' indicator for movement type 101.
    I had created a outbound delivery > TO creation > confirmed TO for an item which has no stock in whse.
    Then after I did inbound delivery> TO creation , so while TO creation the system is diverting some stock to 916 directly from 902. This part is fine.
    But my question is , do we have any setting that sets the stock on outbound delivery as pre allocated once the availability check is done and found that no stock for that outbound delivery is availale in the whse.
    What exactly LT51 play here.
    Thanks,.
    Mono

    Hi,
    Pre allocated stock is something similar to Cross docking.
    This process is triggered by creating entry in pre allocated stock table.
    When you create TO for Putaway system will check the pre allocated stock tabel & give a message if there is an entry.
    You can goto preallocated stock tab in TO creation screen & add the qty. Reamining qty if any can be putaway with normal search process for BIN. In this case you will have 2 line items in TO.
    Once you confirm TO system will clear the Pre allocated stock table.
    Hope this will help.
    Navin

  • Pre allocated stock process

    Hi Experts,
    I am trying to use the pre allocated stock process.
    It is working fine till the time I move stock to the GI area for Cost center directly from Goods receipt area.
    Now there is a stock of 100 PC in my GI area for cost center.
    When I do the Goods issue to cost center & try to convert TR to TO is giving error that no source bin found. But in this case system should use the same source bin as a destination bin because the stock is existing in that bin.
    The process is working perfect if I try to issue 10 PC instead of 100 PC.
    Can you please help me to solve this problem?
    Thanks,
    Navin

    As per my understanding pre allocated stock scenario finishes when the goods are transferred from goods receipt interim area to goods issue interim area (first TO).
    When you post the GI (in Inventory Management), WM will work as you set it to work in LE-IM interface. If you set auto TR creation, it will create auto TR even if it makes no sense in your example since the goods are already in the proper bin and during the GI SAP consumes them from the interim storage bin.
    (Maybe SAP could not find out a foolproof solution to avoid the creation of such TRs)
    So, second TR has nothing to do with pre allocated stock scenario.
    What you can do:
    - delete the unnecessary TR (Set "Final Delivery" in LB02)
    - do not create the unnecessary TR (e.g. you can set "No Transfer Requiremnt" in MIGO / MB1A)
    - develop your own solution
    Edited by: Csaba Szommer on Nov 21, 2010 5:06 PM

  • Pre-allocated Stock

    Dear Experts,
    The concept of pre-allocated stock is clear including the pre-requisites (flagging the movement type as relevant for pre-allocated stock + maintain pre-allocated stock quantities in transaction LT51).
    In my test case, I did the following:
    1. I made movement type 101 as relevant for pre-allocated stock
    2. In LT51 I put material = M1 with storage type = 911 and bin = TEST and quantity = 10 PC
    When I did a GR for 30 PC, the system alerts that there's pre-allocated stock. So, the TO will be split into two items:
    - 20 PC from storage type 902 -> 001
    - 10 PC from storage type 902 -> 911 (from GR area to GI area)
    So far so good. However, I have two questions:
    1. How do I now consume the 10 PC on storage type 911? If I do a GI for 10 PC, the system will create a TO from 001->911
    2. How do I automate the stock placement TO? It seems that when there's pre-allocated stock, the TO automation will not function.
    Regards,
    Hani
    Edited by: Hani Kobeissi on Feb 3, 2012 2:38 PM

    A)
    You described the issue perfectly, but you didn't provide an answer. I'll be really surprised if SAP doesn't have a solution for this. I'll try to describe the issue in more details and with an example:
    I did answer, here you can find it again:
    I don't know the official answer, but it seems it is simply not solved. Maybe the reason is that this situation should be exceptional ("urgently need for goods issue").
    Other thing might be that if you urgently need stock for GI, then even if the system creates a TR for the inventory management posting (as per your IM/WM interface settings), you won't be able to create TO from the TR 'cause you don't have sufficient stock (=you cannot move the goods issued quamtity from your normal storage type; if you can then why are you using the preallocated stock scenario?).
    B)
    Say I have a reservation of 10 pc for a certain material M1. Since I have no stock of this material, then I won't be able to do a GI. Instead, I put in the pre-allocated stock that I need 10 in storage type 916. Then my order for this material arrives with 50 PC. Normally, I've setup the system to automatically create a TO to put the 50 PC in storage type 001. With this pre-allocated stock:
    1. THe TO is not automatically created. Why? Can I automate this?
    2. The system splits the TO into two items: the first item will put away the 10 PC straight from 902 to 916 and the remaining 40 will be sent to 001 (so far so good except for the automation).
    After I confirm the TOs, I'll end up with 10 PC in 916 and 40 PC in 001. However, I haven't done the GI yet. THen, when I do the GI against the reservation, the system will automatically create a TO of 10 PC from 001 to 916 and will decreate the 10 PC from 916. So, I end up with 0 PC in 916 and a new TO. If I confirm this new TO, then I'll end up in 10 PC again in 916 and 30 PC in 001 and my reservation is closed.
    The big question is how the hell will I consume these 10 PC that are now on 916? Any other GI will trigger another TO.
    1)
    If you have no automatic creation of TO for your normal process (902 --> normal storage type), I don't think there will be automatic TO creation for the preallocated stock.
    Neither in SAP documentation I can see this functionality for preallocated stock nor I'm aware of any such setting in config. Based on what do you expect it should work this way?.
    2)
    If you want to GI 10 pcs then the 10 pcs which has been moved from 902 to 916 will be consumed, no need to create a TO to move 10 pcs from your normal storage type to 916.
    If the GI creates a TR of 10 pcs to move the goods from 001 to 902 you can "delete" the TR. Other solution is that before confirming the TO you can cancel it using LT15.
    If due to your settings you cannot avoid moving the 10 pcs from 001 to 916 then you have to move them back manually (LT01 / LT10).
    This is how I see this and I can be easily mistaken. I hope someone from SAP also reads the thread and can provide an official answer.
    Edited by: Csaba Szommer on Feb 8, 2012 7:46 PM

  • Warning when moving allocated stock to blocked stock

    Dear all.
    we are facing a problem with our quality / mm flow. We have materials that while in stock need regular quality inspections (every 72 hours) .
    Batch is inspected and passed inspection and allocated to a sales order / delivery but will only be shipped in a few days. Then the batch is inspected again and does not pass inspection. The inspection people move the material from unresticted to blocked status.
    However the delivery is goods issued and send to the customer because the quality inspection people don't get a warning that the batch is already allocated to a sales order when they do the goods movement into blocked stock.
    Anybody has a sollution?
    Regards,
    CvM

    Hi Lakshmipathi
    thanks for the info. However if I understand correctly this means that every batch needs quality inspection before PGI and that is not the case.
    Every 72 hours the batch will be quality inspected. In most cases the delivery and the PGI will take place within the first 72 hours. However in some exeptional cases the inspection will take place between Del note creation and PGI (not on purpose, just the 72 hour boundry, the quality inspection people are not aware of the delivery)
    At that time the batch is already allocated to a delivery yet during the quality inspection the batch fails the qualifications and will moved to blocked stock.
    The people who move the batch into blocked stock need the warning that this batch has been allocated to a delivery so that it can be stopped before the trucks leave our property.
    Regards,
    CvM

  • Rule in ATP for allocating stock

    Hi Team,
    Where can we check the rule in ATP ,,ie, the percentage specified for allocating the stock to the customers.
    Thanks for the help.
    Thanks,
      Vijesh

    You have not explained clearly what is your current configuration.  In normal circumstances, stock would not be reserved against specific customer / sale order.  Once the required stock is produced, production team would transfer the stock to Unrestricted Storage Location.  Of course, via configuration, you can allocate stock against particular customer or sale order.  Please search the forum how to achieve this.  Alternatively, I am not sure, whether you are looking for Product Allocation functionality.  Please search in Google with this topic.
    G. Lakshmipathi

  • Special Stock Indiacator-Individual customer Stock

    Hi,
    We have some packing materials (VERP -Material Types) in our BOM.
    Once the production order is created a special stock indicator(1-Individual customer stock) is getting assigned in the prodcution order BOM only for those materials.
    when the system is performing availablity check during release.The system is giving missing part list even when the stock is availble in the storage location.
    Please let me know what

    Hi ,
         If the individaual collective indicator is blank in mrp 4 view of material master  , you will get this type of message , To avoid this fill the value as 1 in that field and check it by creating a new production order .
    For the production orders already created remove the spl stock indicator for the material in the components over view ...
    Regards,
    Kumar

  • Memory allocation much more than size of table TST03

    Hi all,
    I found a strange situation, in our system, memory allocation in SP12 shows 2GB is used in DB side, but when I go to transaction DB02 to check the table TST03, it only has 50MB. Our parameter rspo/store_location is already set to 'db'.
    System environment is: ECC6 running on AIX 53/Oracle 10g, 64bit.
    In my opinion, temse data will be stored in TST03, so I think TST03 size should be larger than memory allocation result in SP12.
    Could you please help me about this?
    Thanks and regards

    Hi Justin
    Nice question, really made me think. I just checked, in the newer SAP versions, TST03 has a BLOB column, in the older versions there was a LONG RAW col.
    I bet you have the BLOB (ECC6), you can check in sqlplus:
    [code]SQL> desc sapsr3.tst03
    Name                                      Null?    Type
    DCLIENT                                   NOT NULL VARCHAR2(9)
    DNAME                                     NOT NULL VARCHAR2(60)
    DPART                                     NOT NULL NUMBER(5)
    DROWNO                                    NOT NULL NUMBER(10)
    DDATALEN                                  NOT NULL NUMBER(5)
    DCONTENT                                           BLOB[/code]
    A lob column is stored in a seperate segment:
    [code]SQL> select SEGMENT_NAME from dba_lobs where table_name = 'TST03';
    SEGMENT_NAME
    SYS_LOB0000031954C00006$$[/code]
    Just replace your segment_name to get the size, you can enter the segment in DB02 too:
    [code]SQL> select BYTES/1024/1024 "SIZE_MB" from dba_segments where segment_name = 'SYS_LOB0000031954C00006$$';
       SIZE_MB
            12[/code]
    Regards
    Michael

  • Business area is not updating when allocating stock to sales order

    Dear Experts,
    When ever we allocating/dislocating stock in MB1B with 412E and 411E movement type,business area is not updating in the
    accounting documents.but we assigned business area to plant in the customization.its happening to our Depot,for remaing plants its working.
    Regards,
    Varun

    please suggest me right forum to post the issue.
    Regards,
    Varun

  • Stocks app: font size

    Is it possible to change (decrease) the font size of the list with stocks? That would make it possible to show more stocks at a glance without scrolling.
    The font size is too large yet IMHO

    They didn't make it possible probablly because they didn't make those Apps. Weather/ Stocks (yahoo), Maps (google), YouTube (youtube/google).
    They worked WITH Apple to get those Apps on there. Weather and Stocks were direct rips from their Yahoo Widgets. Google Maps, Google already have tons of versions of their mobile map code, just set it up to work with the unique abilities of the iPhone.
    Features and abilities in them are really worked out with those companies. Yes they work with Apple on testing and everything, but it does come down to those companies and thier code. They are just the lucky two companies that got to work with the SDK with Apple first, and odds are helped test out the SDK.
    It is sort of like getting upset with Dell when MS Word doesn't do what you want it to.
    Message was edited by: DaVBMan

  • Pre-Allocated Stock - Auto Transfer Order

    I am looking at implementing a stock allocation process, but it looks to be conflicting with the auto transfer order process that we are using in receiving. 
    The allocation process is working fine, but as soon as I want to use an auto transfer order creation process, I get a failure message and the TO does not create.
    Is there a way to create the TO based on the allocation in the background without any message errors?
    Thank-you

    can it be that you try to achieve something with this functionality for which this fuction is not designed?
    Preallocated stock is an exception to normal business, and the user tells this exception to SAP by maintained the table.
    So SAP knows about an exception and can act accordingly and e.g. pick the material directly from receiving area, and does not wait until all stock is putaway.
    http://help.sap.com/saphelp_470/helpdata/en/c6/f83fbe4afa11d182b90000e829fbfe/frameset.htm

Maybe you are looking for