Special Stock Indiacator-Individual customer Stock

Hi,
We have some packing materials (VERP -Material Types) in our BOM.
Once the production order is created a special stock indicator(1-Individual customer stock) is getting assigned in the prodcution order BOM only for those materials.
when the system is performing availablity check during release.The system is giving missing part list even when the stock is availble in the storage location.
Please let me know what

Hi ,
     If the individaual collective indicator is blank in mrp 4 view of material master  , you will get this type of message , To avoid this fill the value as 1 in that field and check it by creating a new production order .
For the production orders already created remove the spl stock indicator for the material in the components over view ...
Regards,
Kumar

Similar Messages

  • Customer Stock (Special stock indicator B and item category C)

    Dear All,
    I am mapping my service center scenario in sap,
    We are consumer product manufacturer when material is wthin warranty or outside warranty, for any defects or replacement customer come with defective material to my service center.
    When i will post receipt for the material it should be the CUSTOMER stock,
    For that i need detailed information about special stock indicator B and movement type combination.
    also item category C in purchasing documents.
    plz tell me that i can directly configure these things in sap or B and C both are standard provided by sap.
    I am using 4.7 in my system B and C both are not available.

    Hi
    In the Standard Sytem these are the special Stock Indicators
    E     Orders on hand
    K     Consignment (vendor)
    M     Ret.trans.pkg vendor
    O     Parts prov. vendor
    P     Pipeline material
    Q     Project stock
    V     Ret. pkg w. customer
    W     Consignment (cust.)
    Y     Shipping unit (whse)
    I have not found B - Special Stock indicator.
    You can use Accotunt assignment Category D  - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
    Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
    Thanks & Regards
    Kishore
    Thanks & Regards
    Kishore

  • REG: Creating customer stock for different material codes has an single set

    Hi FRIENDS,
    we  are purchasing finished items from our vendor in numbers (Eg. Item Number 1 to 6 (all different items and having different item codes)) and selling it to our customer in a set ( 1 set contains all this 6 items and we have code for this Set).  Please let me know how to create the customer stock for these items in the store as the store shows stock for 7 different  items, not in a set.
    Please let em know if any more information is nedded

    hi dan,
    as per your requriment you can have all MRP viewsfor HAWA material type.
    that means you are purchasing, use HAWA for finished goods in SAP system.
    if you are having different item codes seperately for each item.
    take one packing material called CARTON and maintain UOM as 6 items and you can pack the same in BOM.
    use PP -PHANTOM - BOM which should add all the 7 materials in & gives one single material as OUTPUT.
    use 561 GMT and upload that material as a final finished goods and in MMBE you can see only one called CARTON inside it set of 6 materials will be there.
    BUT BE AWARE OF COSTING OF THE MATERIAL because each material will be having the its price. So discuiss with PP as well as FICO consultants.
    whether you will cost the total set of carton or individual material
    go ahead
    test and confirm
    this clears your issue
    balajia

  • MRP Exception Message 26: Excess stock in individual segment

    We would like to modify the logic relating to MRP Exception Message 26: Excess stock in individual segment to allow for a material-specific tolerance threshold, within which no exception would be generated.  An alternate approach might be to deactivate  message 26 and create a new custom exception that accomplishes the same thing.
    The reason is that we fabricate and procure a large number of materials in a Make-To-Order environment, with some planned scrap at multiple levels of sub-assembly.  The result is that we often have small residual quantities of components & sub-assemblies in sales order stock when the project is complete.  Some of these may be useful on future projects so we want them to remain in stock, but we donu2019t want them to continually generate exception messages that distract our planners from the exceptions that truly need attention.
    I have tried setting up a storage location that is excluded from MRP, and this works only if the material is in General Stock, but not if it is in Sales Order Stock.
    If anyone knows of a way to either set up an allowed tolerance, or exclude a sales order segment from MRP, please let me know.

    DB49,
    I have previously suggested just what you have indicated (ie. to move the parts back to unrestricted geneeral use stock).  My company's objection is that the materials were either produced or procured for that original sales order and that the costs for these materials are in that sales order as well.  Using a 411E transfer posting will not only move the stock, but also the cost (as if we are buying it back from the sales order).  Since there is no guarantee that we will be able to sell it again, our accounting department will not allow us to do this.
    So the bottom line is:
    We do want to retain visibility to these stocks.
    We don't want the cost for these stocks back on our books
    If the opportunity presents itself, we want to move them to any future sales order for the same material.
    We don't want the hundreds of exception messages for "excess stock in individual segment"
    However we do want to see this message for actively planning sales orders that may have too much stock
    There may be no way to get this, but that is the goal.

  • Customer Stock

    My client is wanting to use Customer Stock B segement for the special stock indicator.  I have never used this type of segment before and not sure of the benefits.  There will be a sales order created however the sales order will have nothing to do with the inventory as it will be a service only.  This B segment will be used for customer components that are sent in and Aircraft that is brought in for service and the engine removed.  Also the Client states that the customer will ship their material in for use on the repair of the component.  Never stocked here in warehouse; but should be able to show the movement into inventory (customer owned) and issued to repair the component.  There are times when the component is sent as an exchange.  In my past life I used the E stock indicatory with a sales order or service order.  I am unfamiliar with B segment and have heard the movements are restricted.  I have searched for information around B segment and unable to find any.  If anyone has the information or has used this B stock solution before,  please reply.  Also, any advice in handling the inventory on when the customer sends the material in (not stocked but want to use as part of the customer component repair) would be greatly appreciated.  We are using split valuation however the sales order will hold no value as the cost of the repair will roll up to the WBS.

    Hi Jeannie,
    Please check this link and get the solution.
    http://help.sap.com/saphelp_dimp50/helpdata/EN/7b/2bd74064d50b06e10000000a155106/content.htm
    Regards,
    Anil

  • No customer stock exists

    Dear gurus,
    I have created customer order(VA01) for consignment fill up. When I am making PGI system gives error as No customer stock exists.
    I have checked stock is available.
    Item category is KBN.
    To make PGI what must I do?

    Check the stock might be in Schedule for Delievry...Go to MD04 and Check or CO09.
    Then clear the respective assignments to Sales Order.
    OR
    You might be using Special Stock..Specific to Sales Order....'E'
    Srini

  • ATP Check against customer stock for return Sale order

    Hi Friends,
    Pl.help in this.
    1. Is it possible to configure ATP check against Customer stock in a Sale order/Return order/any other way? ( Actuallly, client wants to take back empty cylinders through return sale order by ATP check against the customer stock)
    Regards,
    Mani

    Hi Mani ,
    Are you  taking cylinder as returable packing item or not?
    ex- For soft  drinks or beverages industry  it pretty common , they  use thel returnable package material type and more over why you want  use return sales order for this?
    Note- Just plz explain  scenario to MM and PP People also as availability check with all combination
    Hope it is helpful to you,
    Regards
    Venkat

  • Error While Doing Physical Inventory (Customer Stock)

    While doing the Physical Inventory for the Customer Stock, the following error is coming:
    Fld selectn for mvmt type 701 / acct 45500000 differs for Profit Center (042)
    Message no. M7093 Diagnosis Comparison of the field selection strings from movement type 701 and G/L account 45500000 has revealed that there is an incompatible field selection combination at one or more points. Field for which the field selection is different: Profit Center Example On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed. System response You cannot post this transaction, unless you have changed the field selection adequately
    Pls. help in solving the problem.
    Regards,

    Hi,
    before you go any further you should first check with your finance team that the correct GL account is being proposed. the reason that the fields don't match may be caused by the fact that the wrong GL has been set up in the auto tables (Trans event Key GBB, account modifier INV and whatever valuation area and valuation class is relevant).
    If the GL account is found to be the correct one then you need to get someone from the FI team to change the field settings on that account to enable the correct data to be linked to it.
    None of this is the domain of an MM consultant apart fron the auto account tables and so please do involve your FI team before you do too much.
    Steve B

  • How to resrve the stock to the customer against the sales order

    hi,
    sap gurus,
    good morning to all,
    how to reserve the stock to the customer against the sales order if this process is not MAKE TO
    ORDER SCENARIO.
    the prices of the products will be often changing drastically so
    he is following MAKE TO STOCK Process in his production process.
    so with out using m.t.o. process how to reserve it against the customer.
    for eg:
    in the market when the customer/dealer/stockist coems to know that prices are going to increase
    then obviously he tends to purchase in bulk quantities and reserve it in godown.
    so how to map that process.
    help me on this.
    regards,
    balaji.t
    09990019711

    Dear Balaji,
         This can be done By MM consultant through movement type. to move the stock from unresticted stock to customer stock.
    Regards,
    Sudhir

  • Report showing Total Stock of individual materials and not specific to Sloc

    Our requirement is to display the current Stock of every individual material with its description and not Storage location specific..
    We dont want the Stock specific to Storage Locations.We need the overall Stock of individual materials.
    Pls dont suggest
    MMBE Stock Overview
    MB52 List of Warehouse Stocks on Hand
    MB53 Display Plant Stock Availability
    MB54 Consignment Stocks
    MB5B Stocks for Posting Date
    MB5W List of Stock Values
    MC.1 INVCO: Plant Anal. Selection: Stock
    MC.5 INVCO: SLoc Anal. Selection, Stock
    MC.9 INVCO: Material Anal.Selection,Stock
    The above doesnt solve my purpose.
    Apperciating ur immediate response.
    Regards
    Zulfikar

    Hi Zulfikar Ali,
                          Develop a Z-Report with help of techinal consultant...........
    regards,
    Patil

  • Table for Customer stock in Quality inspection

    Hi
    In which Table the following is stored
    For current month
    Customer stock in Quality inspection
    Unrestricted use Consignment Stock
    For previous month
    Customer stock in Quality inspection
    Unrestricted use Consignment Stock
    Thanks
    RG

    >
    R G wrote:
    > Hi
    >
    > In which Table the following is stored
    >
    > For current month
    > Customer stock in Quality inspection
    > Unrestricted use Consignment Stock
    >
    > For previous month
    >
    > Customer stock in Quality inspection
    > Unrestricted use Consignment Stock
    >
    > Thanks
    > RG
    Check the following tables:
    MSKU,MKOL
    MSKUH,MKOLH
    Regards,
    Indranil

  • Valuated project stock not allowed with customer stock.

    Hi,
    I am trying to create invoice correction request for credit with the reference of invoice
    the invoice data is not copying into sales order. I am getting the error "Valuated project stock not allowed with customer stock".
       My question is can we have any routine in copy controll to fulfill my requirement or do i develop a new routine?
    Thanks in advance.
    Regards,
    Narayana

    Hi
    Did you find any sloution for this problem?
    I am facing the similar error.
    Inputs will be helpful
    Thanks
    Regards
    DDP

  • Customer stock in projects

    Hi All,
    How to maintain customer stocks in projects.
    When a customer gives some materials for project  execution, some cases it wil be consumed and some cases it should be returned to the customer.
    Is it possible to have F stock in projects?
    Regards
    Prasad

    Hi,
    If you are using PS module, you can use WBS to segregate by project and hence by customer. In this way you can use the functionality of PS to track Q (project) stock.
    Thanks,
    Venkat

  • Deficit of Customer stock unr. 0.001 CV : MM12345 1000 batch W

    Hi Gurus,
    Created batch upload of consignment sales with auto dr.
    Upon doing pgi; Deficit of Customer stock unr. 1.001 CV : MM12345 1000 batch W.
    My question is. How come this is happening when i have availability check active iand it allocated stocks for these deliveries?
    Thanks in advance!
    -Joker

    Unless your database is strictly a DSS-type of database, your AWR report exposes loads of issues with it. And I think none of the time during the AWR window was spent on database. Look at the DB time (with all those multi cores) compared with the elapsed time of the AWR.
    As you are on 11g, why not make use of MEMORY_TARGET (a single parameter to manage both SGA and PGA)? If you are already on it, ignore this as I can't see it anywhere. If not, get rid of SGA_TARGET and PGA_AGGREGATE_TARGET and replace it with a single MEMORY_TARGET parameter. However you may have a minimum threshold set for different SGA pools so that they won't shrink beyond that point.
    Having said that, setting MEMORY_TARGET is not a guarantee to avoid ORA-4030. Just a single bad PL/SQL code could go and exploit the untunable part of your process memory and even go and blow up the physical memory. If you are using FORALL and BULK load, see if you can cut it down into few chunks rather than running as a single process.
    What does your V$PGASTAT say?

  • Customer stock  reset -- sales order deleted.

    Hi Gurus,
    customer stock tied to the sales order is updated. But now the sales order is deleted. Now, How to remove the material form customer stock.
    Thanks in advance
    ram

    I think you need to have a sales order, remove the stock first then delete the sales order.  Try creating a sales order with the same customer first, then remove stock (same way as you brought in or adjust out) then delete sales order.

Maybe you are looking for