Alloting freight on item cost on basis of volume(diffrent way)

Hi all
During GRPO the client wants to allocate freight, custom duty on the cost of item. The allocation of freight should be on the basis of CBM/ Volume. The calculation is shown below:
Item           custom duty     CBM/Volume       qty    unit price    Actual price
Mouse      200rs               3m3                      10      100rs          Cal. shown below
Keboard   400rs               10m3                     20      200rs          Cal. shown below
Note: CBM/volume will be filled by user manually at row level, it cant be picked from master data as it keeps on changing during every GRPO. Custom duty will be also entered manually.
At document level user will enter diffrent freights as:
1. Del order expenses= A rs
2. clearing & forwarding = B rs
3. Doc. charges = C rs
Total freight will be calculated somewhere in UDF=ABC= Rs 10,000(Suppose)= this is total lorry freight
UDF lorry volume= 1000m3
Now calculation
1000m3 costs= rs 10,000
1m3 costs = rs 10
Now considering cost of freight applicable on mouse=3m3(3 meter cube) *10rs=30rs
likewise considering cost of freight applicable on keyboard=10m3(10 meter cube)*10rs=100rs
Now actual price is to be calculated at row level for mouse item=100(Unit Price)*10(Qty)200(custom duty)30(cost of freight applicable on mouse)
actual price is to be calculated at row level for keyboard item=200(Unit Price)*20(Qty)400(custom duty)100(cost of freight applicable on keyboard)
THE PURPOSE OF DOING SO IS THAT USER WANTS THAT ITEM COST SHOULD BE UPDATED WITH THIS ACTUAL PRICE.
Hope it clears you. Please provide some solution how to handle it in SAP B1.
Thanks

I have tried this. but this is only possible when the volume is to picked from item master data. Here in this scenario every time volume changes and so user fills it manually at row level.
So what could be done regarding this?

Similar Messages

Item Cost as Base Price in calculating gross profit

Hi All,
We're using FIFO as item evaluation method. If "Item Cost" has been set up as the base price origin for gross profit, where does SB1 get the value for the gross profit base price for an invoice?
I know it is not from any price list, and it is not from oitw.avgprice. Is this item cost calculated using FIFO?
Thanks in advance.

Hi,
Your assumption is correct. It is item cost calculated using FIFO.
Thanks,
Gordon

Freight /Packaging farwarding charges in item cost

Hi All
I have two questions ...
1- I want to Know how to add freight and other expenses in item cost ...........
2- there is an BP who is vendor and customer both ..... wht is the procedure to treat this (in payment term) Ex- i purchase goods of Rs 1000/- and sale of goods for Rs 1500/- how can i take the payment of Rs 500/- as BP is customer and Vendor...
Thanks and Regards

i want to give suggesion for your question
I have two questions ...
1- I want to Know how to add freight and other expenses in item cost ...........
Answer 1.
*When you make a new freigh form Adminuistration then you can set this freight amount should be Add in Stock
form Administration > Setup> General > freight in this form we should be check at stock column*
2- there is an BP who is vendor and customer both ..... wht is the procedure to treat this (in payment term) Ex- i purchase goods of Rs 1000/- and sale of goods for Rs 1500/- how can i take the payment of Rs 500/- as BP is customer and Vendor...
Answer 2.
*In SAP we can not create BP as vendor and customer it should be seperate ,but the time of payment you should goto reconcilation for BP.
Follow this step
Business partner > Internal reconcilation > select multiple BP check option ,and then select both same party name with different code and reconcilation
Thnaks & Regards
Manvendra Singh Niranjan

Price List Base On Item Cost

Dear All,
Do you know how to set price list base on item cost?
Please advice.
Thanks in advance.
Regards,
Lina

You have the option to use Last Evaluated Price. I don't think Item Cost is available to set as a Base Price for a Price list
Suda

Item Cost is missing

Dear All,
hopefully someone can kindly help on this.
The item cost is missed
in Inventory, for itemA there is still InStock 4, but the item cost is missed (not showing).
And i cannot find the Base Price in the GP report, but Inventory Posting List has the purchase price.
itemA still have the item cost in few days ago, but after today i use Credit Memo for returning itemA and enter the item cost manually, then i found out this problem. there is also itemB, but itemB has no problem.
million thanks about this

Hi Tac,
you may have a look at this thread :
https://forums.sdn.sap.com/click.jspa?searchID=20603446&messageID=6532368
especially at the posting of Jeyakanthan:
Customer Cannot Issue Item From Warehouse
Item Cost = 0 and Allow Stock Release without Item Cost is disabled
Symptoms
Error message on adding outgoing inventory document:
"Cannot issue item from WH which is managed by batches or serial numbers".
Customer cannot issue an item from warehouse (with some transaction decreasing on-hand quantity). When issuing item, customer cannot select an item batch or serial no. although it exists and has enough available quantity.
Resolution
Check setup options in SAP Business One:
If in Company Details > Allow Stock Release Without Item Cost is selected.
What the valuation method is in Item Master Data > Inventory Data Tab.
Check Item Cost:
For moving average price (MAP) and standard price, please check Item Cost in Item Master Data > Inventory Data Tab. If customer selected option: "Manage Item Cost per Warehouse" in Company Details, check the Item Cost for relevant warehouse in the tab row.
For FIFO item, please check the Item Cost of open FIFO layers. In version 2004 C and 2007 A, Item Cost can be seen for remaining Open Quantity of FIFO layers in Inventory Revaluation window after selecting relevant item and warehouse.
For all versions, please run following SQL query:
SELECT T0.[ItemCode], T0.[Warehouse], T0.[OpenQty], T0.[OpenValue], T0.[OpenValue]/ T0.[OpenQty] as ItemCost FROM OINM T0 WHERE T0.[ItemCode] =[%0]
If the ItemCost is zero and Allow Stock Release Without Item Cost is not selected, Customer needs to change Item Cost to a non-zero value.
regards

Freight line item not getting created in Invoice

Hi,
We are using Inbound IDOC to create invoice with freight line items in it, The message type used is INVOIC and the standard inbound function module is IDOC_INPUT_INVOIC_MRM, The invoice which is getting created does not hold the freight line item in it. Actually we hope the indicator Goods Item/Delivery costs/Both which is present in the invoice (RM08M-XWARE_BNK) determines the creation of freight items or not. In our case the invoice is getting created with the indicator value as 1 but we hope the value 3 would be required for frieght items.
Please let me know if the above message type and the standard function module would be able to handle the creation of frieght line items or we need to look for some other option.
Regards,
Prabaharan.G

Hi Prabaharan,
i have the same request for posting planed freight costs with the IDOC.
Do you have a solution or workaround meantime ?
Thanks and best regars,
Roman Zimola

How to process a transaction where a customer needs an Item on Trial basis?

How to process a transaction where a customer needs an Item on Trial basis.
It essentially means that the item should not move to customer's stock. It still has to be the part of inventory valuation.
Couple of options i tried out but i did not find them satisfactory. Such as:
1) Create an Internal requisition (eventually an Internal Order) and receive the item in the diifferent Warehouse (Same OU) in locator enabled sub inventory. and Locator would capture the customer address to an extent.
2) Create Consignment Subinventories for customers and store the items in those Subinventories. Although items have been shipped to customer. This way we can still have the item as a part of valuation.
If at all you have done similar kind of stuff or if you could think of better and logical solution, can you please guide me on this?
Thanks in Advance.
KS
Edited by: devilisalive on Nov 11, 2008 7:59 AM

KS
Lived through that couple of times.But nothing out of the box. But here are some question:
1. What would you do when you physical or cycle count for this stock? This is physically not here, but you are showing that in your inventory valuation account and showing quantity as well.
2. What do you do at the end of demo/trial period? What if the customer wants to buy instead of returning? Are these serial controlled items?
3. Do you use installed base also?
To overcome the first question what we suggested is to park it in a temporary account (say Demo or Trail account) instead of COGS account when you ship. Can be easily done with account generator and a different order type.
If your process is to return no matter what (at the end of the trial period), you may want to create an RMA and book it against the original order as soon it is fulfilled (extension). This helps you to see how many products are out there that are yet to be returned. Link these two orders line_id to line_id (as we do in copying).Keep the original order line status in In Demo or Trial and do not close the line. Once you receive the product against the RMA close the original line.
What about the cost (assuming std cost)? If you are shipping new products on trial basis, they are going out at full cost. When the customer returns them the value is not the same (probably). If yes, do you receive into a different organization where the cost is different or to the original organization? If it is different, the demo account may have some value left out.
Originally when shipped
Cr Inventory 100
Dr Demo A/C 100
If you return into a different organization where the cost is say 50% (assuming you are using std cost).
Cr Demo A/C 50
Dr Inventory A/C 50
You can see there is a balance of 50 in the account.
If the customer wants to buy, do you bring the goods back (logically) and ship them again? This is a clean way system wise but pain in neck process wise.
In order to achieve process efficiency not to involve people, you can do this. You can just create bill only order line and invoice the customer. But what about the relieving value from Demo account recognizing COGS account? You have to perform a logical inventory transaction and account for this to cr Demo A/C and Dr COGS A/C at the original cost.
Also demo may be shipped to customer X but they may want to you to invoice to parent company.
I wish there is a clean solution available in Oracle as a standard, but could not find one. Hence a lot of extensions. Still there are lot of more questions, but I limit to these here.
Yes, this Devil is Still Alive :)
Thanks
Nagamohan

Freight line item it doesnu2019t show Migo no.& any other references

Dear SAP Friends,
At the time of MIRO for Raw material, When we select Goods services+planned delivery cost tab, then for material system shows Migo no. & reference no. But for Freight line item it doesnu2019t show Migo no.& any other references.
For this can we solve by any other method?
Please Reply.
Regards,
Chandra

Pay freight amount as unplanned delivery cost (in that case you need not have freight line item at the time of GR).
Alternatively Post subsequent Debit. For screenshots refer the below link
http://e-mory.blogspot.com/2007/05/sap-miro-enter-freight-cost-to.html

Adding Packing Charges , Transportation Charges in Item Cost

Hello Experts,
We are using Moving Average Valuation Method, i just wanted to ask how to add packing charges , Transportation Charges, Freight charges on Item Cost while posting transaction.
Regards
Manish

Hi Manish......
You have to manage these costings in Landed Cost......
After making GRPO copy the GRPO into landed cost and give the transportation or fright charges there.
It will automatically included into Item Cost.......
Regards,
Rahul

Item cost in Bills of material(BOM)

How to see item cost(FIFO, Average) for all raw material when constructing BOM. I feel strange why SAP is calling out from price list since price list consist of purchase cost or selling price rather than actual inventory cost based on inventory valuation method?
Regards
Thomas

Hi Thomas,
What about using the "Last Calculated Pricelist". Would'nt that carry forward the Valuation Price? You would need to run a "Update Parent Prices Globally" to update the latest Valuation of the Item. Please check on this as I am not 100% sure of it.
So try this as it may work.
- Create a pricelist called "Valuation Pricelist" and base this pricelist on the "Last Calculated Pricelist" and at a factor of 1.
- Set your Components Item's Pricelist as the "Valuation Pricelist" on your Item's BOM.
- Set your Parent's Item Pricelist also to the "Valuation Priclist" on you Item's BOM and click the orange arrow/triangle button to update the "Parent Product Price" value.
- Update the BOM
- Run a full Production cycle and see what your results are and this should have a "Total Variance" (between your "Actual Components Cost" and your "Actual Product Cost") to zero $0.00
If I am correct, this should carry the total components' values over to that manufactured parent's value.
But every time you purchase a component ("Recieve"), you will need to do an "Update Parent Item Prices Globally".
Try this and let me know what your results are.
Thanks
Message was edited by: Noor Jooma

Similar transaction in CS module to re-estructure costs data base in OS

Hi Experts.
Does anybody know if there is a transaction in CS module to re-estructure Cost data base of a service order, similar to CJEN?.
Thanks

Mahee,
We have maintained all personnel no of the employess working under a particular Maint.Work center in HRMS tab. Employee master data for all Infotypes are maintained in Personnel Management in HR module. So wen the Employee enters Time details of his working hours per day, he has to mention the maintenance order Or it is like a standing order on the time sheet per line item. Wen transfer of working hours will be done on a particular order the entire cost will be reflected in Cost tab page. Since me have maintained different Activity type/Activity price per employee I am confused about the flow of cost...
Ur suggestions were valuable.... hope to get some more clearity...

Need to include tax amount in item cost on grpo

Hi all
is there any way where I can book my item cost on grpo basis ??
Well I have one issue, I get material and send for production before creating ap invoice but the cost of my tax not include in item after setting of 100%
non deductible field, and because of this after issue the material when i create ap invoice my tax amount goes in price difference
so is there any way to book tax expenses on grpo ??
Thanks
Ricky

Hi
SAP B1 purchase document entry
Go to Administration > Setup> Financials> Tax>Tax Type->Double Click on Tax and enter 100 % in Non Deductible % field.
Thanks
Mohammad Imran

Item cost conversion for buy item

HI
can you please tell me what are the validation for Item Cost for BUy Item
what are the fields that have to be check and validated .
what is interface table and base table \
What is master program
Thanks in advances

hai,
U try this one
SELECT T0.ItemCode, T0.ItemName, T0.AvgPrice, T1.WhsCode, T1.OnHand FROM OITM T0 INNER JOIN OITW T1 ON T0.ItemCode = T1.ItemCode WHERE T0.AvgPrice=0
and T1.WhsCode = 'pinnacle' and T1.OnHand > 0
Avgprice is numeric .so use 0.for varchar datatype only use is null.
Regards,
Ramya.

Item Cost calculation

Hi to all,
My problem is:
Item Cost is calculate on the basis of unit price, tax is not include. I want that Item Cost should be calculated on the basis of actual price+Tax amount. Please if anyone can help me on this.
thanks & regards
Annu

Hi Anu....
Its easy. Go to Administration > Setup> Financial --> Tax > tax Types>
Double on a tax type whose tax amt need to be included in item cost.
Put the 100% on Non Deductible column and save it.
Now when you select this tax code in transaction its value will go to item cost.
Generally people include CST amount in item cost. So if we give 100% deductible on CST tax Type then its value will go to item cost.......
Regards,
Rahul

Difference between Item Cost and Last Evaluated Price

Dear All,
What is the difference between Item Cost and Price in Last Evaluated Price List. Exactly when are they updated?
Regards
Sibasish

Hi Sibasish,
The "Last Evaluated Price" is simply a price list but can't have a direct manipulation like other price lists. Its values may not involve in any accounting transactions if it's not selected for the concerned transaction any way.
On the other hand the item cost is the cost which is maintained by SAP B1 (until and unless you select the Standard Valuation Method), and it gets involved in the accounting transactions where inventory is involved. For e.g. the "COGS" is calculated on the basis of this value.
Please close this thread if answered ... or please let us hear something more from you on this...

Alloting freight on item cost on basis of volume(diffrent way)

Similar Messages

Maybe you are looking for