Freight line item not getting created in Invoice

Hi,
We are using Inbound IDOC to create invoice with freight line items in it, The message type used is INVOIC and the standard inbound function module is IDOC_INPUT_INVOIC_MRM, The invoice which is getting created does not hold the freight line item in it. Actually we hope the indicator Goods Item/Delivery costs/Both which is present in the invoice (RM08M-XWARE_BNK) determines the creation of freight items or not. In our case the invoice is getting created with the indicator value as 1 but we hope the value 3 would be required for frieght items.
Please let me know if the above message type and the standard function module would be able to handle the creation of frieght line items or we need to look for some other option.
Regards,
Prabaharan.G

Hi Prabaharan,
i have the same request for posting planed freight costs with the IDOC.
Do you have a solution or workaround meantime ?
Thanks and best regars,
Roman Zimola

Similar Messages

  • ERMS : Email work items not getting created

    Hi Forum
    In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
    Mails are visible in SOIN but their associated Work items are not there in SWI1.
    I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
    Any thoughts ? Help will be deeply appreciated.
    Regards
    Vishal Mani

    Thanks Bruno for your time to reply !
    I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
    I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
    In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
    Infact that is the first thing, I checked when work items were not getting created.
    So no clue from here too.
    Regards
    Vishal Mani

  • PO line item not getting invoiced...

    Hi SAP Gurus,
       I am facing one problem.PO has been processed successfully but invoice is not getting generated for one of the line item.Can you guide me in this issue ?

    Hi,
    You may be trying to create the invoice without doing the Good Receipt for that line item.
    Rgds,
    SAP Friend

  • PR to PO conversion error - Partial line items not getting converted

    Hi All,
    Automatic PR to PO conversion ( ME59N ) is not happening for few line items.
    For the same Article,site, vendor combinations,its getting converted on few days and on few days its not.
    No changes were made to the any.
    1. Source List is created for the Article & Vendor combination. Validity is fine. Fixed vendor option is checked.
    2. Info record is maintained.
    3. Auto PO option is checked in Vendor Master
    4. No release Strategy
    Will the Purchase Group have any impact in the conversion?
    Kindly share your views.
    Thanks in adance.
    Regards,
    Bhaskar

    It's going to be a data selection problem.  If it was a problem with conversion you would see something recorded in the log (assuming you have the log parameter set to show all messages).
    Make sure the Auto PO flags are set in the correct purchasing org and site.  Does your requisition have a purcahsing org?
    What selection critera do you have set in ME59N?  You mention that that the problem only occurs on certain days so it could be related to the release date.
    The only other thing I could suggest is authorisation checks.  Are you approved for the correct activity types (the activity for ME59N is not create) , plants, purchasing groups etc.
    Also keep in mind everything I have said may not be relevant to the IS-Retail solution you are using.  I can't be certain if there are any differences in this area when you are running that solution.  It might be worth asking the question in that forum http://scn.sap.com/community/retail

  • Approvers of Rejected line items not getting removed -Process controlled WF

    I have developed shopping cart approval using process controlled workflow. We are using SRM 7.0, patch level 9.
    Decision set used is item based approval for partial documents (Type 4)
    While testing I observed that when I reject any item, the corresponding approvers of that items are not getting removed.
    As per your requirement, if we create SC with 2 items A and B. Based on various conditions
    2 process levels are determined for item A, say approver X and approver Y at respective level.
    3 process levels are determined for item B, say approver X, approver Z1 and Z2.
    Approver X, rejects item A and approves item B. Since one item is rejected, the work item is sent to requestor for acceptance. All process levels are of type "Approval". Once the requestor clicks on "Accept" button, the item A, which is rejected gets deleted from the shopping cart.
    However now when I see the Approval Process Overview, the current approver shown is Y. The work item is sent to approver Y and the value of the shopping cart is shown as 0.00. Logically the approver Y should have been removed from approval process.
    Could you let me know if I am missing any step or do I need to do some coding to get rid of approvers of rejected items.
    Regards,
    Manish.

    We were using N-step process level on the item level contrast to example provide by SAP of N-step process leve on Header level. SAP uses standard tables /SAPSRM/D_WF_015 and /SAPSRM/D_WF_016 to implement the logic. We have customized the solution with logic on same line of sap but using bespoke tbale ZSAPSRM_D_WF_016. Let me know if anyone needs solution.

  • STPO 2nd line item not getting shipping tab

    Hi All,
    We have a issue with STP0, user created the STP0( different company code) with 3 line items of same materials.  The first line items shipping tab is appering but second & third line items are not getting the shipping tab in item detail
    Please help me to resolve the issue.
    Thanks and Regards
    Chandrashekar.R

    Hi,
    Thanks for your update,
    First line item and second line item materials are same.  i have checked the sales views for the supply plant.
    Regards
    Chandrashekar.R

  • "The Customer line items not getting cleared through F-28"

    Hi,
    There are 4 line items when going into option FBL5N . However, payment has been received, and when going into option F-28 to post the payment, only 2 of the 4 lines appear, and the full payment cannot be allocated. Please advise why all 4 lines do not appear.
    Regards
    Harish Madhavan

    Hi,
    Thanks a lot for the prompt response.
    I have checked that, any other settings which I can check.
    Thanks
    Regards
    Harish

  • Excise invoice should not get created without PGI

    Hi,
    I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
    This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
    Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
    Kindly advise as to how this can be done.
    Regards,
    T Saravanan

    Dear Saravanan
    Two options are there
    -  in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
    -  apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
    thanks
    G. Lakshmipathi

  • Invoice is not getting created in Order related billing

    Dear all,
    I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
    In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
    Please suggest me if there are any configuration changes i need to do to overcome this problem.

    Apart from the suggestion already given, also ensure that
    the order is not showing in incomplete log
    the order is not blocked for credit limit
    You can also cross check in VF04 whether system is fetching that sale order.  For information, once you execute VF04, by default, system will check only "Delivery related" check box.  You have to manually select "Order related" check box.
    G. Lakshmipathi

  • Line item is getting Switched in OBD, created with ref to PO

    I have created a PO# 4500189441.
    In that PO there are two line items as below:
    Line item# 10              C792X1CG                         280
    Line item# 20              X792X1MG                         160
    But when we create an OBD with ref to this PO in VL10D, line item are getting switched as below:
    In OBD# 89490798,
    Line item# 10        
    X792X1MG                        
    160
    Line item# 20      
      C792X1CG                       
    280
    Can you please let us know the reason behind it or is there any configuration for this?
    Thanks & Regards,
    Tanmay Mondal
    SAP SD Consultant

    Hi Tanmay,
    First Check the Delivery type configuration in the Logistic Execution ---Delivery Type IMG path
    Your Delivery type should have Item Requirement as '202' and check the Default Order type assigned to it.
    Next go to the Specify Copy Control for Deliveries-----In that select the copy control from the Default sales doc. type which is assigned to the delivery type and the Delivery type which you are Using
    Select and in the Item Data click on the delivery item category which is assigned to the delivery type.
    In the details of the selection check the Item Data in the Data Transfer Block.
    The routine assigned to it should be '202'
    This will Solve your Issue.
    Regards

  • SC - Item in transfer process - PO is not get created

    We are in extended classic senario , SC is showing status as Item in transfer process - PO is not get created .
    Could you please give me any pointer for the same
    Thanks in advance .

    Hi,
    Other customer has also reported this issue and the fact that it is       
    happening sporadically. Hence Development has created a report for this   
    issue, please see the below note:                                                                               
    729967: Shoppng cart:Status I1111,no follow-on docs->analysis report                                                                               
    Please run the above report and then check the effected shopping carts.                                                                               
    Also I would recommend the following note to be implemented:                                                                               
    1233037: BBP_MON_SC: Shopping cart transfer ends in status I1111                                                                               
    Please implement both notes and run the report. This should help with     
    this issue.                                                               
    I hope this helps,
    Kind Regards,
    Lisa

  • FI Archiving - System error: Customer/vendor line item not on OI basis

    While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
    Regards,
    Shailesh

    Hi Adisha,
    This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
    Either you wait for the next invoice with big amount but which seems bit impractical..
    In this we really need to consult the Accounting Standards to see what it could allow.
    Regards,
    Chintan Joshi

  • SRM PR is not getting created in ECC backend

    Hello Experts,
    We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping.  We do have PI 7.11 running in the Environment as well.
    We are on ECC 6.0 with Ehp 4.0
    Purchase Order:
    However we can see the PO creating successfully using PI.
    Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
    is this the reason that we need PI?
    Purchase Requisition:
    PR Creation is not working:
    PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
    I also have a question to ask:
    1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
    Please advice.
    Thanks
    Kumar

    yes, i could see a PR number with all this additional details as below.
    Table   BBP_PDBEI
    CLIENT                       453                                                              Client
    GUID                         4CAEFA58EB9D005CE1008000AC1C2031                                 Globally Unique identifier
    BE_LOG_SYSTEM                QA1400                                                           Logical System of Logistics Backend
    BE_OBJ_ITEM                                                                                Follow-On Object Item in Back-End System
    BE_OBJECT_TYPE               BUS2105                                                          Follow-On Document Object Type in Back-End System
    BE_OBJECT_ID                 2000000167                                                       Follow-On Document Object ID in Back-End System
    BE_REFOBJ_TYPE                                                                                Reference Object Type in Back-End System
    BE_REFOBJ                                                                                Reference Object in Back-End System
    BE_REFOBJ_ITEM                                                                                Reference Object Item in Back-End System
    BE_REFOBJ_SBITM                                                                               Reference Object Sub-Position in Backend System
    BE_REFOBJ_TYPE2                                                                               Reference Object Type in Back-End System
    BE_REFOBJ2                                                                                Reference Object in Back-End System
    BE_REFOBJ_ITEM2                                                                               Reference Object Item in Back-End System
    BE_REFOBJ_FYEAR2             0000                                                             Reference Document Object - Fiscal Year in Back-End System
    BE_STGE_LOC                                                                                Storage location
    BE_PLANT                     2016                                                             Plant
    BE_BATCH                                                                                Batch Number
    BE_VAL_TYPE                                                                                Valuation type
    BE_MOVE_REAS                 0000                                                             Reason for Movement
    BE_EXPERYDATE                00000000                                                         Shelf Life Expiration Date
    BE_PUR_GROUP                 206                                                              Purchasing group
    BE_PUR_ORG                   2000                                                             Purchasing organization
    BE_CO_CODE                   2000                                                             Company Code
    BE_DOC_TYPE                  CLRQ                                                             Purchase Requisition Document Type
    BE_ACCREQUIRED                                                                                Account Assignment for Logical Backend Required
    BE_SP_STK_IND                                                                                Key for Special Stock Section
    BE_INFO_REC                                                                                Number of purchasing info record
    BE_MOVE_TYPE                 201                                                              Movement type (inventory management)
    BE_PACKNO                    0000000000                                                       Package number
    BE_INTROW                    0000000000                                                       Internal line number for limits
    BE_ITEM_TEXT                                                                                Short Text of a Service Purchase Order Item
    BE_PO_PRICE                  1                                                                Price from Backend
    BE_UNLOAD_PT                 200                                                              Unloading Point in Backend
    BE_DEL_IND                                                                                Deletion Indicator in Backend Documents
    BE_TRACKING_NO                                                                                Requirement Tracking Number
    BE_COND_TYPE                                                                                Condition Key
    BE_COND_STEP                 000                                                              Level Number
    BE_COND_COUNTER              00                                                               Condition counter

  • Tds line item not simulating while posting as reference with FBR2

    Dear All
    When I am posting an Invoice using previous document as reference with Tcode FBR2 WTax line Item not simulating, but while I am posting  without reference  i.e. with Tcode FB60 it is simulating, this problem i am facing in production server from this fiscal year but in development server it is working properly.
    what is the possible cause and how to solve this problem.

    Hi,
    For WHT cannot be deducted by using F-02 OR FB01.  It seems system is using the same transaction in background and not FB60 and hence tds is bnot getting deducted.
    Regards
    Milind Sonalkar

  • Line item not relevant for payment release

    Dear Expert,
    When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
    I also have set payment block in master vendor and  OBB8.
    Can you tell me why the error message still appear?
    Kindly need your help
    Thanks and Regards,
    YL

    Do you have any workflow variant in place?
    Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
    Vendor itself will not get paid until unless you remove the block option
    Thanks

Maybe you are looking for

  • BI Content of BI 7.0 ABAP Trail Version

    Hi, I have installed the BI 7.0 ABAP Trail Version on my home computer and it works well, but when I tried to activate some Infocubes from the BI Content, I saw there is only one Infoarea 'Techical Content' in BI Content. Can any one tell me where is

  • Startup BAM 11g error in weblogic

    we have applied JRF to Managed Servers that are in a domain by selecte Oracle JRF in the Configuration Wizard when we created the soa domain. but when we start up the application "oracle-bam(11.1.1)", following error occurs: java.lang.ClassNotFoundEx

  • C++ Runtime Error when opening iTunes

    When I try to open iTunes, the iTunes window pops up and I get a runtime error with the Microsoft Visual C++ Runtime Library. Specifically, it says - Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe R6025 - pure virtual function call Anyone

  • Liquify Tools won't work in Photoshop Cs6

    I am trying use the liquify effect on my images shot using a Canon 50D and none of the tools seem to work. I have successfully used the liquify effect on stock images obtain/purchased from the internet, so I am confused as to what could be the proble

  • Dreamweaver CS3 + Safari for Windows problems

    Hello Well first off I would like to Thank Apple for making a Version of Safari that runs on Windows. As a web developer (using DW CS3 for Windows) I always had to upload a test webpage to a server, look at it on a Mac, and go back to Windows to make