Allow edit strings in constant pool + show index of constant pool items

Please allow us to edit strings in constant pool and show the numeric index of constant pool items.

Editing the strings in the constant pool takes some work since you have to re-adjust several length values throughout the SWF. However, SWF Investigator does show the index of the constant pool items in the disassembler tab. Any time a constant is used, you will see " //nameIndex = #" at the end of the line. This number will represent the index of that constant in the constant pool.

Similar Messages

Bad index in constant pool #1 Code segment has wrong length

java.lang.ClassFormatError: nz/net/quickstep/uiobjects/Cba2efkSflctl (Bad index in constant pool #1)

From your code..
Here is a suggestion
try {
for (int i=0; i<b.length; i++) b[ i ]=0; // zero the array
Class c = defineClass(name, b, 0, b.length);
} catch (ClassFormatError cfe) {
System.out.println("Error trying to load class "+name); //print the name....
for (int i=0; i<b.length; i++) b[ i ]=0; // zero the array
Class c = defineClass(name, b, 0, b.length);This make all bytes to '0'. So how would it create class??

RMI ClassFormatError *_Stub (Bad index into constant pool)

I get a
java.lang.ClassFormatError: RollGrinder_Stub (Bad index into constant pool)
when I try to instatiate my class that extends UnicastRemoteObject in my main RMIServer code.
java version "1.3.1_01" on RedHat Linux 7.1
Can anybody help me?

Never mind I am an idiot. I was using javac & java from 1.3 but was using rmic & rmiregistry from an older version of java

ClassFormatError *_Stub (Bad index into constant pool)

I get a
java.lang.ClassFormatError: RollGrinder_Stub (Bad index into constant pool)
when I try to instatiate my class that extends UnicastRemoteObject in my main RMIServer code.
java version "1.3.1_01" on RedHat Linux 7.1
Can anybody help me?

Never mind I am an idiot. I was using javac & java from 1.3 but was using rmic & rmiregistry from an older version of java

Allow only String to List

Hello,
I have a ArrayList.
ArrayList as = new ArrayList();Now i want to allow only string to be added in this arraylist how can i achieve this? Don't want to use generic.
Please guide.

Ankur Raiyani wrote:
i have been asked to do not use generic.
In given example where you have seen generics. It is clearly said if you don't want to use generics then use instanceof keyword.
I want such a way that List only allows me to add String if i add other object then it should throw an error.Exactly , i've gave an idea how to use instanceof and allow only string objects in arraylist.
If not clear, please go through the below program:
import java.util.*;
import java.lang.*;
class ArrayListForOnlyString
     public static void main(String st[])
          List stringArrayList = new ArrayList(){
               public ArrayList ar = new ArrayList();
               public boolean add(Object ob) throws UnsupportedOperationException
                    if(ob instanceof String)
                         ar.add(ob);
                         return true;
                    else
                    throw new UnsupportedOperationException("Only String Object are accepted");
               public void add(int index, Object ob)
                    if(ob instanceof String)
                         ar.add(index,ob);
                    else
                    throw new UnsupportedOperationException("Only String Object are accepted");
               public Object[] toArray()
                    return ar.toArray();
               public String toString()
                    return ar.toString();
          try
          stringArrayList.add(new String("10"));
          stringArrayList.add(1,new String("10"));
                // Uncomment the below line and run, it 'll give error , as you are trying to add Integer Object to array list.
          //stringArrayList.add(new Integer("10"));
          System.out.println("The objects of arrayList are : "+stringArrayList);
         }catch(Exception e)
                    e.printStackTrace();
}Edited by: 833545 on Aug 31, 2011 3:53 PM

Site with editable regions won't allow editing

Hi, I have set up multple sites for InContext Editing. All works fine except this last one that won't allow editing online. When clicking "Edit Page" I get a message saying "There are no editable regions." I have checked and double checked the pages and the regions are there. I've reflowed the content into all pages (template) but I still get the same message in InContext.
Please help me figure out what's wrong and how I can get the pages editable.
Here's a link to the website http://www.nolimithockey.com
Let me know if you need anything else in order to help me figure this out.
Thanks a bunch!
Hanna in Tahoe

i'm done, thank you
2009/10/19 Dan POPA <[email protected]>
>
InContext Editing can edit only the elements having the ice:editable
attribute set.
Your page should contain something like this:
>

<div ice:editable="*">
some editable content here
</div>
>
But there are no such elements in the
http://www.nolimithockey.com/index.html page.
>
You say you can see the ICE regions in that page so I can only assume that
you didn't upload the file on the FTP server and you are looking at your
local version of the file, not the one from the server.
>
Another possibility is that you mistakenly treat Dreamweaver Template
Editable Regions as InContext Editable Editable Regions.
I can see that there are DW editable regions in your page: the elements
located between the  comments.
>
>
You can create ICE editable regions by selecting in Dreamweaver an element
and applying the Create Editable Region command under the DW menbu Insert ->
InContext Editing menu, see the image:
>
http://forums.adobe.com/servlet/JiveServlet/download/2242-505554-2323206-23866/create_ice_ er.png
>
Please let me know if any of these were of any help to you,
Regards,
Dan Popa
>

Unchecking "Allow Undefined Strings" for System Combo Box Doesn't Work

Why will my system combo box still allow undefined strings even after unchecking "Allow Undefined Strings"?
The combo box works nicely because it allows the user to start typing in the string they want and the combo box will finish it off for them, but if you hit delete or change a letter turning it into an undefined string, the combo box will accept it.
Edit: I'm using LV 8.5
Message Edited by Sima on 01-14-2009 07:03 PM
Message Edited by Sima on 01-14-2009 07:04 PM
Attachments:
systemcombobox.vi ‏8 KB

I don't see the issue with Delete, but Backspace causes what I think you're seeing. If I type "a" into your example combo box, it autocompletes the "re" in the word "are". If I hit delete, nothing happens. If I type other characters, nothing happens. But, if I hit backspace, then the "re" disappears, leaving just "a". If I click outside the combo box, the a is left, and a string indicator picks this up. Thus, the combo box has allowed an undefined string.
Ouch. A little help from NI, please?
Maybe this is what "festo" was seeing here:
http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=114297
(no offense intended I figured you were just slowing your code down... but thought it was an opportunity to stop others from starting bad habits with Next Multiple.)
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs

I'm using TestStand/Labview to do a string value test. Is there any way to use a variable in the edit string value test?? This forces you to hard code a string to test against.

I'm using TestStand 2.0/Labview 6i to do a string value test. Is there any way to use a string variable in the edit string value test instead of an actual string?? This forces you to hard code a string to test against.

Hi ART,
You can also use the LimitLoader step to load your string into to step similar to the Numeric Step type.
There should be an example of this in the Resource Library | TestStand
Regards
Ray Farmer
Regards
Ray Farmer

I just purchased a few songs from Itunes and could not edit the information in the Get Info section of the file. It's greyed out. Any ideas? Has ITunes changed and no longer allows editing.

Has ITunes changed its editing feature for songs, etc.? I just purchased a few songs and found that I could not edit them using the "Get Info" feature. The information is greyed out and does not allow editing. Among other things, I usually like to eliminate the word "THE" from group names for easier alphabetizing in my library. Thanks for any help.

Check permissions and ownership of the files. Maybe this helps....
How to Take Ownership and Grant Permissions in Windows Vista

Sharing stopped. Sharing set to allow editing and viewing. He can see what I enter. I can't see his entries.

Sharing set to allow editing and viewing. He can see what I enter. I can't see his entries. He sees his entries plus mine. I only see mine. This all worked fine a week ago.

I'm sorry to be so incredibly dense. The article to which you linked says:
"If the computer is already authorized, the item plays. If the computer has not yet been authorized, iTunes asks you to enter the Apple ID and password you used to purchase the song."
I can play songs from my husband's library. I can't drag them into my library.
If deauthorizing/authorizing is the solution, who needs to do what? We've got three computers and two iTunes accounts.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

Only the constants are showing up in the target values.

Hi Guys,
Please help me about my problem in message mapping..
Im quite knew in XI version 7.0.
How come Only the constants are showing up in the target values. my constant values are only doc_type and partn_role.
The rest are data from sql. How can I solve this..Please help.
This is the result of my test tab
Left side - sender
<?xml version="1.0" encoding="utf-8"?>
<ns:MT_TRAVEL_SENDER xmlns:ns="HTTP://TRAVEL.COM/TRANSACTIONS">
   <row>
      <DOC_TYPE>ZTRV</DOC_TYPE>
      <SALES_ORG>4000</SALES_ORG>
      <DISTR_CHAN>40</DISTR_CHAN>
      <DIVISION>41</DIVISION>
      <SALES_GRP>411</SALES_GRP>
      <SALES_OFF>4101</SALES_OFF>
      <PURCH_DATE>2008-10-24</PURCH_DATE>
      <PMNTTRMS>Z015</PMNTTRMS>
      <PURCH_NO_C>AVADIUDS </PURCH_NO_C>
      <PARTN_ROLE>AG</PARTN_ROLE>
      <PARTN_NUMB>0001100074</PARTN_NUMB>
      <INSERTED>1</INSERTED>
   </row>
</ns:MT_TRAVEL_SENDER>
right side -test result under receiver
<?xml version="1.0" encoding="UTF-8"?>
<ns1:BAPI_SALESORDER_CREATEFROMDAT2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
   <ORDER_HEADER_IN>
      <DOC_TYPE>ZTRV</DOC_TYPE>
   </ORDER_HEADER_IN>
   <ORDER_HEADER_INX>
      <UPDATEFLAG>I</UPDATEFLAG>
      <DOC_TYPE>X</DOC_TYPE>
      <SALES_ORG>X</SALES_ORG>
      <DISTR_CHAN>X</DISTR_CHAN>
      <DIVISION>X</DIVISION>
      <SALES_GRP>X</SALES_GRP>
      <SALES_OFF>X</SALES_OFF>
      <PURCH_DATE>X</PURCH_DATE>
      <PMNTTRMS>X</PMNTTRMS>
      <PURCH_NO_C>X</PURCH_NO_C>
   </ORDER_HEADER_INX>
   <ORDER_PARTNERS>
      <item>
         <PARTN_ROLE>AG</PARTN_ROLE>
      </item>
   </ORDER_PARTNERS>
</ns1:BAPI_SALESORDER_CREATEFROMDAT2>

Hi leelaratnam morampudi ,
How can I check if im getting the data in sql? I think it get the data but dont pass the value in bapi
this is the test result in sender
<DOC_TYPE>ZTRV</DOC_TYPE>
<SALES_ORG>4000</SALES_ORG>
<DISTR_CHAN>40</DISTR_CHAN>
<DIVISION>41</DIVISION>
<SALES_GRP>411</SALES_GRP>
<SALES_OFF>4101</SALES_OFF>
<PURCH_DATE>2008-10-24</PURCH_DATE>
<PMNTTRMS>Z015</PMNTTRMS>
<PURCH_NO_C>AVADIUDS </PURCH_NO_C>
<PARTN_ROLE>AG</PARTN_ROLE>
<PARTN_NUMB>0001100074</PARTN_NUMB>
<INSERTED>1</INSERTED>

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why? I can edit some photos, whereas others I can not.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Allow editing of properties of multiple selected objects

Currently one cannot always edit properties of objects -- such as attributes for tags, or tooltips for form fields -- when multiple objects are selected. This occurs when some objects' properties have "conflicting" values. It would save TONS of time, if somehow you could allow edits to one property or attribute while leaving other conflicting properties "as is". I would also like to be able to add header ID attributes to multiple <TD> tags, without deleting header ID attributes already existing.

Are the machines causing this script to hang offline? You can test to make sure they are online before you try to connect
$Cred= Get-Credential
get-content targets.txt | foreach-object{
if (test-connection $_ -count 1 -quiet) {
$Make = Get-WmiObject Win32_Computersystem -Computername $_ -Credential $Cred
$Serial = Get-WmiObject Win32_BIOS -Computername $_ -Credential $Cred
Select-Object $($Make).Name,$($Make).Manufacturer,$($Make).Model,$($Serial).SerialNumber
}} | Export-Csv Results.csv -NoTypeInformation

BigString to Big String - how do I detect index of upper case?

bigString to Big String - how do I detect index of upper
case?
Is there a way to detect, insert space and replace the upper
case letters in a string?

Something like this?
<CFOUTPUT>#REReplace("bigString", "[A-Z]"," "&
Mid("bigString", REfind("[A-Z]", "bigString"),
1))#</CFOUTPUT>
This will at least give you a break at the first upper case
letter. You can then replace the first character in the result with
an upper case as well, which I didn't do, since I figured that you
knew how to do that.
Phil

Allow edit strings in constant pool + show index of constant pool items

Similar Messages

Maybe you are looking for