Allow Goods Receipt only when Goods Issue already done against process order

Hi,
Can we put a validation that , in case of process order, without goods issue system will not allow for goods receipt against that process order.
Regards,
Archana

Check this link
http://scn.sap.com/thread/493508
User exit for GR without GI
Regards,
Himanshu

Similar Messages

How to allow Goods Receipt only when Good Issue done for that process order ?

Hi,
I

Hi Pillai,
Follow the instruction in this document: Without GI Confirmation and Without Confirmation GR Is Not Possible
Regards,
Julian

Landed costs can not get Goods receipt PO when Goods return made

Hi, everybody
I need to calculate landed costs and it seems that I can not use when I built a Goods return.
My procedure as follow ( ps: the same vendor number)
1. created a PO then Goods receipt PO (docNum says 1111) which included 20 quanties for item no AAAA.
2. created a Goods return which Copy from Goods receipt PO no: 1111, which included 5 quanties for item no AAAA.
3. next, I try to caculate my Landed costs. I open a new Landed costs and click the button "Goods Receipt PO", but I can not find any Goods receipt PO no: 1111.
What can I do to caculate my exactly landed costs & Goods receipt PO no: 1111 that included 15 quanties?
Thanks for your help

When you only Returned partial goods from your Receipt. The Receipt should still be open and you should be able to process the Landed cost. I am not sure why the GR is not showing in the landed costs window.
Please check if the GR is closed by an AP Invoice / by itself.
Otherwise, you will need to process AP Goods Return for the remaining 15 and process a New Goods Receipt for 15.
Regards
Suda

Goods receipt and post goods issue are not updated back from EWM to ECC

Hi Experts,
Would anybody able to tell me the setting to be modified / defined to backward flow of information from EWM to ERP i.e. the goods receipt, goods issue are not being updated back in ECC once the goods receipt and post goods issue are posted in EWM?
It would be great help if i get the response as early as possible.
Chakrapani Das

Hi Chakrapani,
You might want to try checking the customization on the SCM part following this path:
SPRO - Extended Warehouse Management - Interfaces - ERP Integration - General Settings
Pay special attention on the Check of ERP-EWM Configuration transaction.
After you have checked these you should probably check the outbound queue monitor (tx SMQ1) from EWM to ERP. You can use the SMQ1 - Outbound queue and SMQ2 - Inbound Queue both in ERP and SCM to check the communication betweene these two systems.
Also you may want to checkt the SLG1 - Analyse application Log in SCM in order to see if any internal bugs exist.
All the best,
Claudiu Maxim

Goods receipt Quanity and Goods Issue Quantity tables

Hi experts,
Can u plz let me know in which tables we can find the Goods receipt Quanity and Goods Issue Quantity
if not how to get the values of these, neccessary for open PO report
Thanks in advance.

Hello,
You can get the GR/ GI quantity for a PO from EKBE table.
GR
EKBE-EBELN = EKPO-EBELN
EKBE-EBELP = EKPO-EBELP
EKBE-VGABE = '1'
EKBE-BEWTP = 'E'
GI
EKBE-EBELN = EKPO-EBELN
EKBE-EBELP = EKPO-EBELP
EKBE-VGABE = '6'
EKBE-BEWTP = 'U'
The qty are present in EkBE-MENGE
BR,
Suhas
Edited by: Suhas Saha on Jan 29, 2009 4:52 PM

Goods receipt against process order with inbound idoc

Hi Experts,
We need to post good receipt against process order with movement type 101 and for By-product 531.
Can we use inbound idoc-WMMBID02,with message type WMMBXY to achieve this functionality?
Or please advise if we can achieve this from any other Idoc type.
We are getting below field values for external system
1. process order number
2.plant
3.material
4.quantity in unit of entry
5.unit of measure
6.storage location
7. movement type
8.Batch
Kindly advise how can we achieve this.
Best Regards
CS

261 and 262 are two different movement types INDEPENDENT of each other. I definitely know for the fact that SAP allows you to create a 262 without a 261. if you were to restrict it... you can disable access through a tcode for that mov. type 262 and ask users to use MBST to cancel any material documents created via 261 movt type.. that would ensure a smooth process

Factory Output Account for Goods Receipt on Finished Goods Inventory

Hello Experts,
Factory Output Account for Goods Receipt on Finished Goods Inventory:
Could someone suggest if anyone has ever been able to separate the variances that normally post to a factory output account into one separate G/L account. My experience has always been that good receipts to finished goods inventory and the corresponding variances have always posted to the same factory output account. My client wants to separate this posting into two separate accounts. Any assistance will be highly appreciated.

Hi,
You can use separate G/L account for Factory Output Account for Goods Receipt on Finished Goods Inventory and Variances.
goto OBYC T.code do the following settings.
GBB-->AUA-assign gl account
PRD-->PRD-assign gl account.
one question from my side.
If you are using same account for both entries, where do you assing GL accounts in OBYC?
Thanks,
Rau

Goods Receipt against Process order mvt 262

Hi,
Is it possible to not to receive material against process order (262 mvt) if it is not issued using process order using 261.
Do the needful.
Regards
Mohan

261 and 262 are two different movement types INDEPENDENT of each other. I definitely know for the fact that SAP allows you to create a 262 without a 261. if you were to restrict it... you can disable access through a tcode for that mov. type 262 and ask users to use MBST to cancel any material documents created via 261 movt type.. that would ensure a smooth process

Goods Return to Store against Process Order

Hi,
Tell me how to do Goods Return to Store against Process Order
For E.g.
Process Order X having Material M1 with Requirement Qty 100 Kg as per BOM specification and Issue Qty using COR6 is also 100 Kg but due to less Consumption 20 Kg is required to be returned to store
So how to have effect of returned 20 KG against Process Order
Note : I have used MB1C option for Goods Receipt but it won't make any effect in Process Order
i.e. Requirement Qty -   100 KG
     Withdrawn Qty     -    100 KG
But in MMBE it shows 20 KG after receipt from MB1C
Kunal

Hi Vivek,
I tried as per your given direction but it won't worked
What I required is for E.g.
Process Order No 11111
Material No           Mat-A
Batch No              Bat-A
Storage Loc          PM01
Requirement Qty which is coming from BOM                        120 KG
Withdrawl Qty either using COR6 or MB1A (261 mov type)     120 KG
Consider that Process Order is already confirmed and due to some reason All the materials issued against Process Order has to be returned to Store for another Process Order
When I used MB1A and entered movement type 262 with storage location PM01 then click on To Order Button to enter Reference : Order and click on Tick Button
It then displayed only those materials which is not yet issued and required to be issued and automatically Movement Type changed to 261
Please guide
Kunal

Why when i try signing in it keeps telling me to set up an account on my pc when i have already done that?

why when i try signing in it keeps telling me to set up an account on my pc when i have already done that?

You can't create an iCloud account on a PC. What is the exact error message you are seeing?

Excess Issue of Material against Production Order

Hi
For Goods Issue of Material against Production order , i want the system to control excess issue of material against Production order. How can it be controlled.
Regards
Madhesh Kumar

Hi Madhesh,
there are many loop holes to issue excess stock against production order
so better you use user exit so that when ever any material issued against production order and it is in excess then throw error
Thanks
Bala

Backflush --Goods receipt from Production -- Goods Issue 261 Process

Hi all
Can anyone please explain the steps that take place in SAP right from when backflush -goods receipt from production happens to the goods issue with movement type 261. At what point does 914 Interim get involved, TR/TO creation etc..
I have an issue where there are stranded open TR's left out which are associated to 261 mvmt type and I would like to understand the whole process better to be able to look analyze the issue. .
Thanks

Hi,
In Standard SAP and RF transaction,
If GR is done for the order, system will generate a TO to place the stock in the warehouse bin, based on the stock placement strategy (thro stock placement indicator) it will search the correct bin location.
So TO will be generate automatically then you can scan the TO to confirm it through RF gun, warehouse staff can confirm the TO by scanning it (LM03).
If you need the GR to be done by the production staff by scanning the order number, you need to go with the development, so in the RF gun, they can scan the order and enter the qty to be received and in the back ground TO will be created and warehouse staff can scan and confirm the TO.
Thanks,
JK

MIGO - Split Valuation in Goods Receipt According to Goods Issue

Dear All,
I am working in SAP 4.7 Implementation Project.
I got one Requirement from MM Consultants.It is quite Puzzling me.But it is Very Urgent.
Here I am Giving the Steps.
1. In MB1C (Movement type (501)) Transaction i will upload the Stock
2. In MMBE i am Checking the Stock.
In our case we are using two Valuation Type i) Loan Stock(LN) ii) Paid Stock(PD).
3.Create Purchase Order (ME21N).
4.In MIGO Transaction we are Issuing the Goods.We set Loan Stock as First Priority i.e During the
goods Issue the System Automatically take the Stock from Loan Stock.If the Available Loan
Stock is Lesser than the Stock quoted in PO it will take the Stock from Paid Stock.After Goods Issue
in MIGO Goods Receipt is not Showing the Stock Picked from Loan Stock and Paid Stock.In goods
Receipt it just Shows all the Stock Picked up from Loan.
Our Requirement is Goods Receipt(GR) should show the same line items as stock splitted in Goods Issue(GI).
It is Very Urgent.Please Help me to Solve This Problem.
Regards,
Ashok.

Hi,
It should be effectively done through raising of Credit / Debit note system only.
Eventhough, it is configured through scales, it causes problems.
Regards,
VB

MIGO - Split Valuation in Goods Receipt accoding to Goods Issue

Dear All,
I am working in SAP 4.7 Implementation Project.
I got one Requirement from MM Consultants.It is quite Puzzling me.But it is Very Urgent.
Here I am Giving the Steps.
1. In MB1C (Movement type (501)) Transaction i will upload the Stock
2. In MMBE i am Checking the Stock.
In our case we are using two Valuation Type i) Loan Stock(LN) ii) Paid Stock(PD).
3.Create Purchase Order (ME21N).
4.In MIGO Transaction we are Issuing the Goods.We set Loan Stock as First Priority i.e During the
goods Issue the System Automatically take the Stock from Loan Stock.If the Available Loan
Stock is Lesser than the Stock quoted in PO it will take the Stock from Paid Stock.After Goods Issue
in MIGO Goods Receipt is not Showing the Stock Picked from Loan Stock and Paid Stock.In goods
Receipt it just Shows all the Stock Picked up from Loan.
Our Requirement is Goods Receipt(GR) should show the same line items as stock splitted in Goods Issue(GI).
It is Very Urgent.Please Help me to Solve This Problem.
Regards,
Ashok.

Dear Jeyakanthan,
Thanks for answering.
Valuation class material is maintained.
Is there a special posting code for batch split valuation potings? (like gbb/bsx/prd ?).
I assume not, but if you have a solution direction, please let me know.
best regards,
klundert.

Error during goods receipt of Finished goods for production order

hi friends
pls help me iam struggle this issue and mentioned the issue .
when i do goods receipt for production order system getting error like
No price could be determined for material/batch FG/ plant ZTP
     Message no. CK 465
Diagnosis
     The system could not calculate a price for material/batch FG/ in plant
     ZTP for valuation view 0, because none of the valuation strategies in
     valuation variant 007 was successful.
System Response
     User-defined error management enables you to specify whether the message
     is an error message, a warning message or an information message.
     o   If you have defined the message as a warning message or an
         information message, the costing item will be entered in the cost
         estimate with a value of zero.
If you have defined the message as an error message, the cost
estimate contains an error or errors.
-   In the case of a material cost estimate, the system sets the
    status KF.
-   If it is a cost estimate without quantity structure, or base
    object cost estimate (that is, a unit cost estimate), the
    system cannot proceed with costing until you have corrected the
    errors.
If the system issues a termination message, the cost estimate cannot
be processed, and processing is terminated.
procedure
    o   Check the master data for material/batch FG/ in plant ZTP.
    o   If you have authorization for Customizing, check the valuation
        strategy for materials in valuation variant 007.
    Note
    If the message is a warning message or an information message, there is
    a danger that materials with errors will be ignored by the system.
    If, because of this, you issue a warning message and at the same time
    include materials with a zero value in cost estimates, you can make the
    following settings for these materials in the costing view of the
    material master:
1. Enter a very low price in the planned price 1, 2 or 3 fields
      manually, for instance 0.01 USD. These prices are used for costing
      purposes only; they are not read by other applications.
2. Enter the highest price unit possible, for example 10000.
      Note: If you enter a new price unit that is higher than the costing
      lot size, the system increases the costing lot size accordingly.
3. Change the valuation strategy, such as strategy 4, where you could
      enter the planned price field in which you entered the low price.
      The system now costs as follows:
      Using the valuation strategy, the system finds planned price 1, 2 or
      3. Due to the low price and high price unit, the system rounds the
      value to zero. However, the cost estimate still obtains status KA
      (free of errors), and no error message is issued.
      This procedure can be used for all materials that have caused error
      message CK465 to be issued.
with regards
dinesh
Edited by: code acess on Nov 8, 2010 4:06 AM

hi ragavendra,
this is dinesh .i maintained the costing view and planned price. but again i have same error.so please reply me where i missed the data
with regards
dinesh
Edited by: code acess on Nov 9, 2010 4:01 AM

Allow Goods Receipt only when Goods Issue already done against process order

Similar Messages

Maybe you are looking for