Allow multiple users to edit in a shared calendar

Some co-workers and I have a shared calendar in Outlook 2010 (separate from our personal, individual calendars) and we'd all like to be able to edit (add, delete, etc) to it.  The creator of the calendar shared it with us and gave us all the appropriate
permissions to be able to edit it, however, only what the creator enters/edits appears for everyone.  Anything additional or changed doesn't appear. 
For example, User 1 creates and shares the calendar.  User 2 and User 3 are given "editor" permissions.  User 2 adds an event to the calendar for all to view, but User 1 and User 3 cannot view it.  
How can we create a calendar so that User 1, User 2, and User 3 can all view and edit this shared calendar?
Thanks!

Hi,
How does User1 share the new created calendar to User2 and User3? Because the shared calendar is User2 created that is not a default Calendar, please share it by the following steps in Outlook 2010:
1. Create a new calendar in User1’s account.
2. Right-click the new calendar, click Share > Share Calendar.
3. In the Sharing invitation window, select User2 and User3 in the To field.
4. Check Recipient can add, edit and delete items in this calendar to give the recipients Editor permission.
5. Click Send to share calendar to User2 and User3.
Then User2 and User3 would receive a message in Inbox folder. They can just click
Open the Calendar button to open it. Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

  • How can I allow multiple users to edit a single shared iCal calendar?

    Is it possible to allow multiple users to edit a single shared iCal calendar? I also want to provide different permissions to those users. Is this possible through .MAC? Is it possible on Mac OSX Server?

    I would like 2 agenda synced through .Mac but it does not work.
    I have 2 computers and 2 laptops. A very simple agenda with 3 calenders. Myself my partner and the office calender. I want to publish my calender and that of my partner. The office calender I would like to sync so that we can change the office calender at any location.
    I set up sync only for iCall and have a .Mac account. When I change anything on any of the calenders in iCall nothing happens on any of my other locations. Even though the locations are registered as synced. I can see the sync wheel turning but at the end of it the calenders are not synced.
    At this moment I fully understand the publish and unpublished calenders but have no clue what so ever what syncing does for iCall. There seems to be no functionality to it. It does not transport any calender info over .Mac. There is no visable check to see what is happening and the process of syncing is not transperent. Lots of my friends go to me for advise on Apple issues but as far as sync wether iCall or Addressbook I always tell them sync does not work and I have no clue why others have it working. I haven't met any people here in Holland either that got in working. I suppose with iCall you have to get third party software to share calenders editable calenders. Really hopeless situation, wish Apple would just have a manual stating what sync can do and what it can not. Hours wasted on this issue trying to get it to work.
    Hope anyone here can help out.

  • How to allow multiple users login to a MAC PRO without interruption?

    I have a mac pro, which runs Yosemite, (2013 module) to be used as a server. However, I have difficult to let multiple users to use the mac simultaneously.
    Objective:
        One person uses the mac directly on his desktop, while the others to login remotely though VNC from PC (win 7/Linux).
        The users have their own workspace, and they will not interrupt each other.
    What I tried:
        I created two mange accounts on the MAC.
        Account 1 was used to directly login on the mac desktop.
        Account 2 was used to login to the mac from a PC though VNC. (I also tried this from a Centos workstation with the Tiger VNC viewer)
    Problem:
    When account 2 is login, the location monitor will automatically change to that account as well. Both accounts shared exactly the same screen, mouse & keyboard actions. It is impossible to let multiple users to use the MAC pro simultaneously without interruptions.
    If I use "hdiutil attach" to mount a dmg file though SSH with account 2, the folder will automatically show in the local desktop login with account 1.
    Question:
    I read something about the "Per-user screen sharing". It says, "You can remotely log into a Mac with any user account on that computer and control it, without interrupting someone else who might be using the computer under a different login." Is it possible to do this from a PC or Linux client?
    If the problem is simply due to the poor functionality of the build-in VNC service in Yosemite, I appreciate your help to suggest some other decent VNC server for Yosemite. I know the Vine Server (OSXvnc), but I failed to install it on the mac because it is incompatible with the Yosemite.
    Does the SSH is supposed to work in this way in OSX? I mean the local account can see the folder mounted by another account though SSH.
    If any specific version of Yosemite is required to allow multiple users to access a mac simultaneously? Just as the win 7 professional allow only one user to login in at each time. But with the remote desktop server of windows, multiple users are able to use the same computer at the same time without any problem.
    If you familiar with any of the above questions, please help. Any comments and suggestions are appreciated.
    I know the best way to get the solution is to direct call the apple support. However, it is really not easy to call them. Because it always results with long waiting time and then the people pick up the phone will transfer my call to an expert who will make me to describe the problem again.
    Since I'm not interested in the technique details of all the problems, it is also grateful if you would provide a direct instruction to let me setup the computer for the purpose.
    Thanks you very much for your kindly help.

    I cannot help with the screen sharing, although I have just tried it with a RealVNC client on an iPad and it seemed to work OK.
    However on the disk showing on all users desk tops have you unchecked the "ignore ownership on this volume" check box? You can check the drives permissions with CMD i command.

  • Allow multiple users access to iphoto

    I would like to allow multiple users on same computer to access Iphoto files.  What setting changes need to be made?
    Thanks
    mfandml

    iPhoto: Sharing libraries among multiple users...
    http://support.apple.com/kb/HT1198

  • Allowing multiple users on one Skype ID

    I was wondering if allowing multiple users online one Skype ID is possible, I currently run a small business, where the majority of the customers use skype just for text chatting, not the call features.
    I was looking to hire employees, but use the same skype thats associated with my current reputation. It also helps when I get return customers, since it'll be available to all workers.
    The last 2 times I tried setting this up, my skype got locked, and I wouldn't be able to afford for it to get locked.
    I was wondering if anyone had any suggestions about the feasibility of this.

    Being doing this idea for years and really was hoping for more development.
    Bottomline when a call comes in and either I answer the call or let my staff answer the call. Then later i can see what happened.
    Unfortunity each new call is not populating outlook with an automactic new record so notes could be made.
    Currently we name the client with notes on back end eg: John Smith ..wants to buy main street call back asap.
    This is crazy way to make notes on incoming calls but there no was to conert to a task or an appointment.... One day .....i can only dream.

  • Compiz starting with GDM allowing multiple users

    When i start compiz after login I've got slow GDM when changing user and
    white screen after second login.
    So there's no way to launch compiz and support two different sessions?
    Or can I start compiz together with gdm and not individually for each user?

    RAGHAVENDRA HARI N wrote:
    Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
    How to use S A System subject area in OBIEE-11g
    How to specify condition in Ibot of OBIEE-11GYou can use the SA System subject area after you set it up by following the documentation link provided below. It could be used in OBIEE Delivers which enables contact information, such as e-mail addresses to be retrieved from a database and used as delivery devices in Delivers instead of having the user's manually setup their own delivery device.
    Here is the link to the documentation on how to setup SA system subject area in OBIEE 11g:
    http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/sa_system.htm
    You can set the condition in the condition tab which is the 3rd one I suppose.

  • Allowing multiple users to receive Ibot in OBIEE-11g

    Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
    How to use S A System subject area in OBIEE-11g
    How to specify condition in Ibot of OBIEE-11G

    RAGHAVENDRA HARI N wrote:
    Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
    How to use S A System subject area in OBIEE-11g
    How to specify condition in Ibot of OBIEE-11GYou can use the SA System subject area after you set it up by following the documentation link provided below. It could be used in OBIEE Delivers which enables contact information, such as e-mail addresses to be retrieved from a database and used as delivery devices in Delivers instead of having the user's manually setup their own delivery device.
    Here is the link to the documentation on how to setup SA system subject area in OBIEE 11g:
    http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/sa_system.htm
    You can set the condition in the condition tab which is the 3rd one I suppose.

  • User has no connection on shared calendar.

    I've checked the countless threads on here that are related to this, but to no avail. Here's the issue.
    I've got a user who accepts a shared calendar invite. When viewing the calendar, it shows up as "No connection." The user is otherwise able to view other calendars, send/receive mail, and other users can view the No connection calendar.
    No problem updates are installed. 

    Hi,
    Is the user able to view the shared calendar on OWA?
    If the user is still not able to view the calendar on OWA, please check if the permission has been removed.
    Let the owner right click on the calendar, Properties, Permissions, check if the user's name is listed. If not, re-gain the permission to the user.
    If the user is able to view the calendar on OWA, try the following steps:
    1. While Outlook 2010 is running, hold down the CTRL key, right-click the Outlook icon in the notification area, and then select Test E-mail AutoConfiguration.
    2. Verify that the correct e-mail address is in the box next to E-mail Address.
    3. Clear the check boxes next to Use Guessmart and Secure Guessmart Authentication.
    4. On the Test E-mail AutoConfiguration page, verify that the check box next to Use AutoDiscover is selected, and then click the Test button.
    Any error?
    We may fix it by reset autodiscover, refer to the link in which there's a user who had the same issue, you may find useful information:
    http://chicagotech.net/msapps/outlook13.htm
    Hope it helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • ChaRM Allowing Multiple Users in the Same CD to be in Edit Mode

    We have upgraded to ChaRM 7.1 but are still using CRMD_ORDER and Transaction Monitor CRM_DNO_MONITOR.  When the Developer completes her change, populates the Current Processor with the Change Manager and clicks Save she keeps the CD open in Edit Mode.  The Change Manager is able to open the same CD and click Edit without any warning on the bottom of the window saying it is being processed by another user.
    When there is a hand off to the next Current Processor, both the previous and current user are able to be in edit mode.  I don't recall this being allowed before.  Has this changed with 7.1?

    DGS wrote:
    I have a global temp table (GTT) defined with 'on commit preserve rows'. This table is accessed via a web page using ASP.NET. The application was designed so that every one that accessed the web page could only see their data in the GTT.
    We have just realized that the GTT doesn't appear to be empty as new web users use the application. I believe it has something to do with how ASP is connecting to the database. I only see one entry in the V$SESSION view even when multiple users are using the web page. I believe this single V$SESSION entry is causing only one GTT to be available at a time. Each user is inserting into / selecting out of the same GTT and their results are wrong.
    I'm the back end Oracle developer at this place and I'm having difficulty translating this issue to the front end ASP team. When this web page is accessed, I need it to start a new session, not reuse an existing session. I want to keep the same connection, but just start a new session... Now I'm losing it.. Like I said, I'm the back end guy and all this web/connection/pooling front end stuff is magic to me.
    The GTT isn't going to work unless we get new sessions. How do we do this?
    Thanks!You may want to try changing your GTT to 'ON COMMIT DELETE ROWS' and have the .Net app use a transaction object.
    We had a similar problem and I found help in the following thread:
    Re: Global temp table problem w/ODP?
    All the best.

  • Sharing iPhoto library in /Users/Shared doesn't allow all users to edit all photos

    I share a laptop with my wife.  We have two separate user accounts on the MacBook Pro.  I've moved iPhoto to /Users/Shared in an effort to allow both users the option to EDIT photos in iPhoto. 
    How do I modify the permissions so that we can both edit photos no matter who uploads them?
    The MBP is running Mavericks (10.9.1)  and iPhoto is up to date (9.5.1).

    Hi Larry - you seem to know what you are doing!  Can I butt in with a question?
    I have a large (75Gb) iPhoto library (all my family photos since 2003) on a MBA (2011) which I use for work.  This Christmas I have bought a new MBA (2013) for family use and want to transfer everything over to the new MBA so that the rest of the family can (1) look at (and use (i.e. email, export, etc but not edit)) them and (2) have their own libraries in their own user directories without cluttering up 'my' shared one.
    I was planning on putting the library into -users/me/public.  Would this work?  Or do you have a better idea?
    Thanks in advance.

  • Prevent multiple users from editing/approving the same form SPD 2013,SP 2013

    Hello all, I have a workflow with a to do task, the task is assigned to a group so any of the users in that group can go in and do a quality check on form data and approve it.  How do I prevent multiple users from working on the
    same form? do I just require check out? or is there a way to notify the rest of the group that a user has already started the quality check.

    The "Require Checkout" option is your best bet.  You can also enable the auto checkout on edit option to allow minimal effort on the side of the user.  Other users will then get the error message stating the item is checked out, if they try to
    edit it.
    If you'd like, you could add a workflow to the task list that triggers when something is changed.  That workflow can check if the item is checked out and if so, email the other users assigned to the task.
    I trust that answers your question...
    Thanks
    C
    |
    RSS |
    http://crayveon.com/blog |
    SharePoint Scripts | Twitter |
    Google+ | LinkedIn |
    Facebook | Quix Utilities for SharePoint

  • Allow Other Users To Edit The User Portal

    HI all,
    Is it possible to allow another user to modify my User Portal without making them a full Admin?
    Out HR Dept. would like a tab for their content and would like to edit it themselves.
    I'm not keen as they would probably hose the entire site.
    Any ideas if this can done?
    Regards
    Colin
    This topic first appeared in the Spiceworks Community

    Hi - I believe the issue is related to java versions. I experienced the exact same problem, and the issue was removed.
    Several small issues in Java Report Panel with unintended behavior is very often related to too old java versions.
    BR
    Jess

  • Multiple users viewing/editing common records

    Hi all. I'm running tomcat 5.5.17. My webapp involves creating/viewing/editing/saving records from a database. Multiple users can login to the app, and so multiple users may view a record. I want to avoid two users viewing & editing the same record, and then saving. Of course, the one who saves last will dictate what actually stays in the DB.
    An easy-way-out I thought of was...I can keep a list in the servlet context, and when a user views a record, add their name, the record id, and a timestamp to this list. Then, it's easy to check who has been viewing/editing a record in the last X minutes, so it's equally easy to display a warning saying "Users also viewing this record in the last 10 minutes: User1, User2, User3." Whenever I add someone to the list, I'd also remove all stale entries (ones which have been in the list for longer than X minutes).
    This isn't a great way to do it, of course. Optimally, I'd want to add and remove users from this list in real-time. Adding is no problem...I can execute whatever commands I need to in the servlet/jsp to add them to the list. Removing though...how can I remove them from the list? Well...WHEN do I want to remove them? When they stop viewing the record. As in, when they browse away from the page. Javascript has a window.onbeforeunload = function() { //do stuff } function...but I can't really run any jsp through there. Unless I open a new window which runs some jsp and closes immediately, but what kind of a solution is that.
    Any suggestions?

    Yeah, change your requirements.
    In my opinion it should be the other way around: the first user who gets the record dictates the resulting state in the database, not the last one. One way to prevent multiple users from overwriting each others changes (a very rare occurence, but possible) is to use all the fields in a record to generate a where clause for the update or delete statement.
    Example:
    A record exists with a name field set to 'bill gates'.
    User 1 selects this record
    User 2 selects the same record
    User 1 changes field 'name' to 'larry laffer'
    User 1 saves the changed record to the database
    User 2 changes one of the fields (BUT STILL HAS 'bill gates' AS THE NAME!)
    User 2 saves the changed record to the database
    Now in the where clause used in the update statement for user 2, somewhere there will be and name='bill gates'. This condition is now no longer true since the name was changed by user 1. The result: the update for user 2 will fail , 0 rows updated.
    A very, very rare sql exception is always better than changes being lost in my opinion.

  • Allowing multiple users to see same table in object browser

    I can't seem to get multiple users to see the same table in the web based Object Browser, even though I CAN get this to work using sqlplus.
    I have been reading all of the reference documentation and have done the following:
    Created a role called edit_subjects:
    SQL>CREATE ROLE edit_subjects;
    Gave it some priviledges:
    SQL>GRANT INSERT,UPDATE,DELETE,SELECT ON myname.subjects TO edit_subjects;
    Grant the role to another guy:
    SQL>GRANT edit_subjects TO otherguy;
    In SQLPLUS I can do the following:
    C:\>sqlplus otherguy/password
    SQL> select * from myname.subjects;
    That works, BUT when I "Browse Tables" using the other guy's login in the Object Browser of the web based interface, I don't see that subjects table. (When I login as myself, I can see the subjects table) Can anyone help me?
    Thanks,
    Dan

    You might try posting this in the Express Edition forum. I'm unfamiliar with that particular front-end, so I'm not sure. Most GUI tools will have the ability to explore objects owned by other users-- there's almost always a way to pick what schema to browse-- but I have no idea how to do that in this specific tool.
    Justin

  • Can I allow multiple users on a blog?

    I would like to have remote users who can update and add pages to a blog in iweb.  Is this possible?

    You can't have multiple users manage an iWeb blog.  That's because you need the domain file that's in your Users/Home/Library/Application Support/iWeb folder to be able to do that.  That would mean all of them would have to have access to the same file and all be running on Macs with the same version of iWeb.
    I suggest you create your blog on one of the online blogging sites, embed it into your iWeb page like in this demo page, Embed a Site Within an iWeb Page, and then give those you want to have access the username and password for managing the blog.  This way you can update the blog from any computer anywhere and from many mobile devices.
    OT

Maybe you are looking for