Allow Sort Order to be configurable

Apparently, when I set Sort Order in Library (I like it as Captured Time), it is reset to the system-defined default of Added Order upon a new import. I'd like the preferred sort order to be either settable as a preference, or at least have the setting be "sticky" so that it stays at what the user sets it as until the user changes it. Thanks!
         Dilip

Hello,
As you have discovered by default both dequeueing via a condition and dequeue via a correlation identifier have never honoured the sort order of the queue table.
You can get it to honour the sort order by setting the following event at the session or system level or in the spfile/pfile as follows
alter session set events '10866 trace name context forever, level 1';
or
alter system set events '10866 trace name context forever, level 1';
or
alter system set event='10866 trace name context forever, level 1' scope=spfile;
Once this is set and a dequeue condition is being used an extra order by based on the sort columns of the queue table will be added to the sql which is executed internally.
So this could have an impact on the dequeue performance when using a deq_condition or dequeueing via correlation id but ultimately you will have the ordering you require.
Thanks
Peter

Similar Messages

  • E66: Configuring contact sort order when composing...

    Dear friends,
    This is probably a silly issue but still, I can't find a solution... I have upgraded my aging Nokia E66 RM-343 to 400.21.013 (this version was suggested by the Nokia Suite and it keeps telling me that this is the latest version). After the upgrade and restoring the phone settings, I am having problems with the contacts sort order when choosing recipients for an SMS message.
    I have configured the contact list for the "Last Name First Name" display order, and when making a voice call, the sort order is correct - the contacts are sorted by the last name. However, when writing an SMS message and choosing the recipients, the contact list is displayed in the "Last Name, First Name" mode but it is sorted by the first name which is extremely confusing and inconvenient.
    I just do not seem to be able to find where the sort order for the contact list as displayed when composing an SMS message can be configured. Anyone have any suggestion/hint? Thank you very much in forward!
    Best regards,
    Peter

    Unfortunately, the 6230i seems to have only one field for the contact name, so it has no way of knowing what is what. I guess the only thing you can do is reinput all the names manually.
    Chris
    6230i (the last bug-free Nokia?)
    Vodafone UK contract since 1992

  • I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

    I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

    If you only see the time then that would mean that you see an entry of the current day (today).
    History items from past days should have the date as well in the Most Recent Visit column.
    You should be able to see this changing if you open the last 7 days folder and scroll down.

  • MAKE TO ORDER AND VARAINT CONFIGURATION

    Hi firends,
    What is the difference between MAKE TO ORDER and  VARAINT CONFIGURATION   PROCESS, in which scenarios we are using both topics. Can any one explain about steps for make to order and variant configuration. i need complete process.

    PLS REFER LIN BELOW
    Make-to-Order (MTO)
    Purpose
    The planning strategies explained in this section are designed for the production of a material for a specific individual sales order. In other words, you do not want to produce finished products until you receive a sales order. This means that make-to-order strategies always support a very close customer-vendor relationship, because your sales orders are closely linked to production.
    The same relationship exists between the sales order and production that exists in a make-to-order environment. Make-to-order is also used in the following environments.
    Production using variant configuration
    Assemble-to-order
    Prerequisites
    Choose a make-to-order strategy, if:
    The materials are segregated. In other words, they are uniquely assigned to specific sales orders.
    Costs must be tracked at sales order level and not on material level.
    Make-to-order strategies should always be combined with lot-size key EX (lot-for-lot. Rounding values should not be used. If you maintain rounding values, they have no effect due to the make-to-order properties of these strategies.
    Process Flow
    There are extensive options that enable you to procure components especially for specific sales order items.
    You may, however, want to use a different planning strategy to procure components without sales orders. This allows you to keep your replenishment lead time to a minimum. You can do this by:
    Planning on the basis of the finished product (see Planning Without Final Assembly (50) or Planning with a Planning Material (60))
    Planning at component level (see Strategies for Planning Components)
    Using consumption-based or Kanban-controlled components
    Customer stock can exist on any BOM level. See Stockkeeping at Different BOM Levels for more information.
    Because production is closely linked to sales orders, this results in a customer section in the stock/requirements list.
    Unplanned goods receipts (such as returns) cannot, as a rule, be used for other sales orders, even if they are in working order, unless they are adapted to meet a customer's needs.
    In the basic make-to-order strategy, Make-to-Order Production (20), no specific product structures are required. This means that it does not matter if the material has a BOM or not. The material can be produced in-house, or it can be procured externally. No planning is involved in this strategy.
    Planning Without Final Assembly (50) and Planning with a Planning Material (60) do require a specific product structure (i.e. a BOM, which means materials are always produced in-house). These planning strategies assume that you want to plan procurement (production or purchasing) of your components by planning the finished products. This means that you need to have a fairly stable demand for your finished products. If, however, you can plan more easily at component level than at finished product level, see Strategies for Planning Components.
    Make to order production
    1. Make to order production means that the materials (finished products) are not stored in the warehouse but produced especially for a particular sales order or a sales order item. An individual customer requirement is generated from the sales order item and transferred to materials planning (MM/PP). You can use materials planning to plan requirements. Once this has been done, production is carried out. After the product has been manufactured, you post it by goods receipt to sales orders stock specifically for this sales order item. As soon as the delivery is due, you can enter the delivery in SD and post goods issue which reduces the sales order stock and then a billing document can be entered.
    2. The item category in the sales document is found using the sale document type and the item category group from the material master found on the tab page sales org 2 i.e.
    a. sales document type – OR
    b. item category group – 0001
    c. item category - TAK
    3. MTO without assembly processing – the requirement quantity (planned independent requirements), delivery date and configuration specifications are transferred from the sales order to materials planning as an individual customer requirement. A planned order is generated using a planning run where the bills of material are exploded and dependant requirements (i.e. multi-level BOM) for the assemblies and components are generated. As soon as the production starts, a production order is created from the planned order. The system returns the confirmed quantity and delivery date from the production order to the sales order.
    4. MTO with assembly processing – in this case the individual components for the final product have already been produced. You only need to assemble the components according to the customer’s wishes. In this process, you only need a one level BOM and generation of dependent requirements is not necessary. In this case no planning run is generated and a production order is created directly from the sales order. The system returns the confirmed quantity and the delivery date from the production order to the schedule lines in the sales order. Any changes made to the confirmed schedule lines or the delivery date is immediately visible in the sales order and/or in the production order.
    5. After production department has finished making the material, goods receipt is posted in the sales order stock i.e. special stock which can only be used for a specific sales order. After posting goods issue for outbound delivery, the sales order stock is reduced accordingly.
    6. Make-to-order production is a process in which a product is individually manufactured for a particular customer. In contrast to mass production for an unspecified market where a material is manufactured many times, in make-to-order production a material is created only once though the same or a similar production process might be repeated at a later time.
    7. You can use make-to-order production: (a) For branches of industry or products where a small quantity of products with a large number of different characteristics are manufactured (b) When a product has to be assembled particularly for a sales order.
    8. Stock keeping is not usually carried out for products that are made to order. In companies using make-to-order production, the demand program only determines the production area, in which various variant types are produced. Depending on how you track the costs associated with make-to-order production, there are two ways to process make-to-order items during sales order processing.
    (a) Make to order using sales order
    (b) Make to order using project system (not relevant for SD application)
    9. for make to order production using the sales order, all costs and revenues involved for an order item are held collectively at that item. A particular rule is used that can be changed manually to transfer costs to profitability analysis.
    10. make to order production is largely a production planning configuration. It is also controlled by the requirements type, which is determined by three things
    the strategy group (MRP 3) in MMR
    the MRP group (MRP1) in MMR
    the item category and MRP type (MRP 1)
    11. Make-to-order production is controlled by the requirements type. The requirements type is determined on the basis of the MRP group (MRP1) and the strategy group (MRP3) in the material master record. In addition, a plant must be assigned for make-to-order items in the sales order.
    VARIENT CONFIGURATION
    Variant configuration is for manufacturing complex products in which customer determines the features of the product. Objective of variant configuration is to react quickly to customers' requirements.
    Here it needs not to create separate material for each variant of a product. When companies introduce variant configuration this often goes beyond a business process re-engineering project.
    1 Variant configuration offers an opportunity to restructure product structures for which then processes are defined. This has a direct impact to the core areas such as marketing and product data management.
    2 Advantages of VC
    · No need to Create separate material master for each variant combination.
    · Super BOM and Super Routing is enough for representing all possible Variants and Operations.
    · Able to react more flexible to customer demands.
    · Increase Information exchange between sales, engineering and production.
    3 What is Configurable Material?
    · A material with different features or characteristics and options is known as configurable material. Example: PC, Car.
    · Configurable materials are either created in a material type that allows the configuration (n the standard system, the material type KMAT) or they are given the indicator Configurable in the material master record.
    4 Master Data used for VC
    Following Objects are used as Master data for Variant configuration.
    1. Super BOM
    2. Super Routing
    3. Characteristic
    4. Class
    5. Object Dependencies
    6. Configuration Profile
    7. SD Condition records
    4.1 Super BOM
    Super BOM Contains all the components for producing configurable product. It contains both variant as well as non-variant parts required for producing configurable product.
    4.1.1 Super BOM configuration
    Super BOM can be created either one of the following methods.
    · Create BOM with class Item of 200-class type that contains all characteristic of a configurable material.
    · Create BOM with all possible materials as its components. Then assign /define dependencies to each component.
    The different between these two methods is
    · BOM with class item, no need to assign or define object dependencies. Instead of that each material is classified in material master itself using class 200.
    · For both cases all characteristics are assigned to class 300 which is again assigned to KMAT material in order to trigger configuration in configuration profile.
    4.1.2 Super BOM with Class Item
    Class items used to control the selection of variant parts in a BOM. Variant parts are classified in a class, and the class is entered in the BOM as a class item. When you configure the material, the class is replaced by a suitable variant part.
    4.1.3 Advantages of using Class Item in BOM
    · Only one item for the class is enough, instead of several items for the individual variant parts.
    · No need to create and assign selection conditions.
    · Able to classify additional objects in the class at any time, without having to change the BOM.
    4.1.4 Steps involved in super BOM with Class
    – Define all Characteristics and its Values assign it to Class with type 200.
    – Assign characteristic Values to materials by Classification material
    – Assign class 200 with material instead of assigning all BOM items.
    – Create and Assign class 300 (with same characteristics) with configurable product using configuration profile.
    4.1.5 Super BOM with Material Components
    This bill of material (BOM) of a configurable material contains all the components that are required to manufacture the material. The BOM contains components that are only used in specific variants (variant parts), as well as components that are used in all variants (non-variable parts).
    4.1.6 Steps involved in super BOM with Material Components
    – Define all Characteristics and its values assign it to Class with type 300.
    – Assign Class with configurable material in Configuration profile.
    – BOM is created with all variant and non-variant items.
    – Define interdependency between objects (Characteristic, BOM item, Routing Operation etc…) by using Object Dependencies.
    – Assign class 300 with configurable product using configuration profile.
    4.2 Super Routing
    A configurable routing describes the production process for all variants of a product. Instead of creating a routing for each variant of a product, you can create operations for one routing, or a "super" routing.
    It is possible to maintain Object dependencies for following in super routing:
    · Sequences
    · Operations/sub-operations
    · Production resource/tool assignments
    The routing is configured by system, when order is created for KMAT material.
    4.3 Characteristic
    Characteristic is used to define the features of a configurable material. To enable to use characteristics to configure a material, assign the material to a class of class type 300. The customer can choose from among different options for each characteristic.
    · Characteristics describe the properties of objects. The values of a characteristic specify these properties.
    · Value assignment to characteristic may be single value or multiple value with required entry or restrict able entry.
    · In characteristic it is also possible to use table name and its field name in order to change the Object quantity or values. I.e. BOM item quantity or Operation time, which is known as ‘reference characteristic’.
    · In Restriction screen allowed Class types are entered i.e. for what are the class this characteristic may used. In general for Variant configuration class 200 and 300 are used.
    · It is also possible to assign Dependency to characteristic values maintained in Characteristic.
    4.4 Variant Class
    · In Variant configuration, Class is used to hold the characteristics that describe about configurable material. Class type to determine which object types can be classified.
    · Class is used in variant configuration if the class has a class type that supports variant configuration. In Customizing for Classification, the Variant class type indicator must be set for the class type. In the standard system, this is class type 300.
    4.5 Dependencies
    · Dependencies restricts the combinations of options i.e. characteristic that are not allowed. It also select exactly the right BOM components and operations to produce a variant.
    · It also describe the interdependencies between characteristics and characteristic values
    · It control which components are selected from a bill of material (BOM) and which operations are selected from a task list
    · It also changes the values of fields in BOM items and operations during configuration.
    4.5.1 Global and Local Dependencies
    Global dependencies have the following properties:
    · They are independent of any object.
    · They are identified by a name that you assign, and are maintained and managed centrally.
    · If you change a global dependency, the change affects all the objects where the dependency is used
    Local dependencies have the following properties:
    · They are only available to the object for which you create them
    · You cannot use the central maintenance functions on these dependencies, and you cannot allocate them to other objects
    · They are identified by a number assigned by the system, not an external name
    Local dependencies are only used where certain dependency will not be needed elsewhere
    The differences between global and local dependencies are as follows:
    · Global dependencies are created centrally and can be assigned to several objects.
    · Local dependencies are created for one object and can only be used with this object
    4.5.2 Declarative and Procedural Dependency
    · In Declarative dependencies the result are explained logically
    · Declarative dependencies are easier to trace than procedural dependencies, because the point in time when the dependency is processed and the sequence in which the dependencies are processed are not relevant.
    · Example for Declarative dependency:
    - Constraint
    - Actions
    - Preconditions (provided that they contain no non-declarative expressions)
    - Selection conditions (provided that they contain no non-declarative expressions)
    · In Procedural Dependency result depends on the processing sequence and the point in time when the dependency is processed.
    - Procedures
    - Preconditions (only if they contain non-declarative expressions)
    - Selection conditions (only if they contain non-declarative expressions)
    4.5.3 Dependencies Types
    The SAP System supports the following types of dependencies:
    · Preconditions
    · Selection conditions
    · Procedures
    · Actions (obsolete)
    · Constraints
    4.5.4 Preconditions
    Preconditions can be allocated to the following objects:
    · A characteristic that you want to hide
    · A characteristic value that you want to hide
    Preconditions are used to hide characteristics and characteristic values that are not allowed and thereby ensure that the configuration of an object is consistent. In the precondition, it is also possible define the circumstances under which a characteristic or value is hidden.
    A precondition is fulfilled if the condition you enter is either true or not violated.
    4.5.5 Selection Conditions
    Selection conditions used to ensure that all the objects relevant to a variant are selected:
    · Selection conditions determine which variants require a specific component or operation
    · Selection conditions determine when it is mandatory to assign a value to a characteristic
    Selection conditions may allocate to the following objects:
    · Characteristics
    · BOM items
    · Operations in task lists
    · Sub-operations
    · Sequences of operations
    · Production resources/tools (PRTs)
    A selection condition is fulfilled if the condition in it is unambiguously true.
    4.5.6 Procedure
    Procedures can be assigned to the following objects:
    · The characteristic value that triggers the procedure
    · The characteristic that triggers the procedure
    · The configuration profile of the configurable object
    Procedure is used for following purposes.
    · A procedure is used to infer a value for a characteristic, you enter the variable $SELF before the characteristic.
    · Procedures can overwrite values that are set by other procedures.
    · Procedures are always used for pricing (see Variant Conditions).
    Processing Sequences of Procedure
    If an object has more than one procedure, a processing sequence is used to define the point when the procedure is processed.
    4.5.7 Action
    Actions are used to infer characteristic values. An action is processed as soon as the characteristic to which it is assigned has a value. It is not possible to overwrite the characteristic values that are set by an action.
    The following Objects can assign to action:
    · The characteristic value that triggers the action
    · The characteristic that triggers the action
    · The configuration profile of the configurable object
    · Configuration profile
    · BOM items – to change the quantity
    · Operations in task lists – to change the standard values
    Since Action is lead to serious system performance problems, it is replaced by Procedure and Constraint.
    4.5.8 Constraint
    This dependency type is mainly for intensively interactive configuration tasks and for configuration tasks in which you need to take into account the dependencies between the characteristics of several objects. The main purpose of a constraint is to monitor the consistency of a configuration.
    Constraints have the following distinguishing features:
    · Constraints are used to describe the dependencies between completely different objects and their characteristics.
    · Constraints are used to store information on which conditions must be fulfilled if the configuration is to be consistent.
    · Constraints are not directly allocated to individual objects. They are grouped together to form dependency nets and allocated to a configurable material in the configuration profile.
    · In constraints, you enter objects in their general form of expression, without using $SELF, $ROOT, or $PARENT to identify objects. As a rule, you refer to objects in constraints by entering the class to which the objects are allocated.
    · Constraints are declarative dependencies. The processing sequence of constraints and the point in time when constraints are processed is not relevant.
    · Constraints are not processed in a specific order. You cannot determine when a specific constraint is used.
    In any processing situation, a constraint is only processed once. If a value that is relevant to the constraint is changed, the constraint is triggered again.
    4.5.8.1 Structure of Constraints
    There are four sections in a constraint. Each part is identified by a keyword. A colon follows the keyword. Each section ends with a period.
    OBJECTS:
    In this section, you enter the objects that are relevant to the constraint. You must enter the relevant objects in all constraints. You can also define variables for objects or characteristics.
    CONDITION:
    The condition entered here must be fulfilled in order for the constraint to be used. You do not need to enter a condition in a constraint. You can leave out the keyword CONDITION: if required. However, if you enter the keyword you must enter a condition.
    RESTRICTIONS:
    In this section, you enter the relation that must exist between the objects and characteristics if the configuration is to be consistent. You must enter a restriction in a constraint.
    INFERENCES:
    In this section, you enter the characteristics for which characteristic values are to be inferred. The main purpose of constraints is to check the consistency of a configuration. Usually, values are only inferred if you make an entry in this section.
    For reasons of performance, only use constraints to infer values if it is really necessary. Constraints are grouped together to form dependency nets. The dependency net is allocated to a configurable material in the configuration profile.
    4.5.9 Dependency Net:
    Constraints are grouped together in dependency nets. For this reason, the variant configuration menu does not support a function for creating constraints directly. So that only constraints are defined within a dependency net.
    5 Configuration Profile
    The configuration profile for a material controls the configuration process in sales order. Configurable profile also used to define central settings for configuring the object. Using this profile it is possible to hide some of the characteristic value defined during characteristic creation. We can assign any number profile for a configurable material in which selection is based on either priority or manual selection during configuration.
    By defining a filter in the configuration profile, possible to determine the scope of the BOM items to improve system performance when exploding the BOM. The filter is active in high-level configuration, in result-oriented BOMs, and in SET processing.
    5.1 Filters in Configurable Profile
    Following objects can be used as filter:
    · Object type
    Class, material, document, text
    In the standard system, all object types are selected and therefore exploded in the configuration. Deselect the object types that you do not want to be displayed.
    · Item category, for example, stock or non-stock item
    All item categories in the configuration are exploded in the standard system. Remove the selection for the item categories you do not want to be displayed.
    · Item status
    You maintain the status of a BOM item in maintain BOM dependent on its usage.
    All items are displayed regardless of their item status in the standard system. However, only the items with this status are displayed when you select specific item statuses. Items are not displayed that do not have the selected status.
    · Sort string
    You can assign sort strings for BOM items in maintain BOM. You can restrict the display of the BOM items by using these sort strings.
    Only items that carry sort strings are checked and only those that match are displayed. Items that have no sort string are always displayed.
    5.2 Component availability in the configuration profile
    The availability check is just a snapshot, telling that whether the materials required are in stock at this moment. Several users can access the same material at once. This means that supply problems can sometimes be overlooked.
    Example: Only 2 pieces of a material are in stock, but the material is used in 3 BOMs. The availability check does not detect a supply problem. The availability check for all 3 BOMs shows 2 pieces in stock.
    5.3 Process Overview
    There are different processes for configurable materials in sales documents. These processes can be defined on the Configuration initial screen tab in the configuration profile, by choosing the Configuration parameter tab.
    The Process are described in the following scenarios:
    Planned/Production orders
    This processing type is used to describe variant products whose configurable materials are assembled using planned and production orders. The bill of material (BOM) can have single-level, multi-level, or no explosion.
    Sales Order (SET)
    This processing type is used to describe variant products that comprise salable configurable materials. These products are supplied together, but are not assembled in a production order. Only sales-relevant BOM items are exploded in the sales order.
    Order BOM.
    You use this processing type if you want to make customer-specific changes to the BOM of a material that you configure in the sales order. In the sales order, you assign values to the characteristics of the header material, but the BOM is not exploded in the sales order.
    6 Material Variant and Planning Material
    6.1 Material Variant
    · Material Variant is an material that can arises from individual Configuration of a configurable product and can be kept in stock
    · For variants that are required frequently, we can create material variants, which can be produced without a sales order and kept in stock. When a sales order is received, it is possible to check whether the variant required is in stock, so that it can deliver immediately.
    · For material variants, a separate material master record is created with a material type that is kept in stock.
    · Separate BOM and routing for a material variant, or you can link the material variant to the BOM and routing of the configurable material. The correct BOM items and operations are determined from the characteristic values assigned to the variant.
    6.2 Planning Material
    · Planning Material is a material, which contains all the non-variant parts.
    · By using planning material all non-variants are procured / produced before sales order.
    · It is also possible for Planing the Planning Materials without reference to any sales requirement.
    · Planning material is planned separately using strategy 65 and produced before sales order creation.
    7 Planing in VC
    The following strategies are used for planning configurable materials and its variant parts.
    Make to Order production of Variants
    – Make to Order for Material Variant. - 26
    – Planning Variants without final Assembly- 55
    – Planning Variants with planning Material - 65
    – Make to order with configurable material.- 25
    – Characteristic Planning with dependent requirement - 56 and
    – Assembly Processing with Characteristic Planning - 89
    8 Variant Configuration: (Object Diagram)
    9 Variant Pricing and Surcharges
    9.1 Sales BOM
    A bill of material (BOM) describes the different components that together create a product. A BOM for a bicycle, for example, consists of all the parts that make up the bicycle: the frame, the saddle, wheels, and so on.
    When you enter the material number of a bill of materials that is relevant for sales order processing, the system displays the material that describes the whole bill of materials as a main item. The individual components are displayed as lower-level items.
    There are two ways to process a bill of materials in Sales. Once you have entered a bill of material in a sales order, the system runs pricing, inventory control, and delivery processing at: Main item level if the material is assembled, or - Component level if the material is not assembled.
    9.2 Processing at Main Item Level (ERLA)
    If you want the system to carry out pricing, inventory control, and delivery processing at main item level, enter ERLA in the Item category group field of the Sales: sales org. 2 screen in the material master record of the finished product. This means that the components only function as text items and are not relevant for delivery.
    9.3 Processing at Component Level (LUMF)
    If you want the system to carry out pricing, inventory control, and delivery processing at the component level, enter LUMF in the Item category group field of the Sales: sales org. 2 screen in the material master record of the finished product. In this case, only the components are relevant for delivery. During processing the system automatically creates a delivery group. The latest delivery date among all the components becomes the delivery date for the entire delivery group.
    10 Configuration of VC
    10.1 Production Planning and Control
    10.1.1 Creating Material
    Use
    The purpose of this activity is to create the material masters for the materials required in this scenario.
    Procedure
    Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Materials Management ® Material Master ® Material ® Create (General) ® Immediately
    Transaction Code MM01
    In Material Master of KMAT material following settings are maintained:
    · Configurable material indicator in Basic Data must set.
    · MRP type is PD.
    · Lot size – EX ( Lot for lot size)
    · Availability check – 02
    · Planning Strategy 25 is entered in MRP 3 screen view.
    · Item category group 0002 or 0004 is to be given in sales view.
    10.1.2 Creating Bill of Material
    Purpose:
    · The purpose of this activity is to create bills of material (BOMs) for the configurable material which is known as ‘super BOM’
    · Super BOM comprise all the variant as well as non-variant parts required for producing configurable material.
    Procedure
    1. Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Production ® Master Data ® Bills of Material ® Bill of Material ® Material BOM ® Create
    Transaction Code CS01
    · The Create Material BOM: initial screen appears. On this screen, data that identifies the bill of material are maintained as well effectivity data.
    · In the Material field, the configurable material for which super BOM need to create is entered.
    · Plant and BOM usage is entered. In general BOM usage 1 for production and 3 is for Universal.
    · In Component screen list of variant and non-variant parts are entered along with that quantity is entered based on Base qty. of the configurable material.
    · It is also possible to enter a class as a BOM component with item category ‘class Item’. This class must hold all characteristics and also classified with each material.
    · Class type 200 and 300 can be used as a class item.
    Following Procedure is followed for assigning class with BOM as a class Item.
    · Enter the item category for class items in BOM.
    · Make entries in the fields that identify the class
    – Class types
    – Class
    · Enter the quantity.
    - Enter a unit of measure if appropriate.
    - The system determines the unit of measure from the additional data of the class.
    - If a unit of measure without a dimension is maintained in the additional data of the class, you cannot change this unit.
    10.1.3 Creating Characteristic
    Purpose:
    · Characteristic is created with possible values.
    · It is also possible to use table name and its field name in order to change the Object quantity or values. Ie BOM item quantity or Operation time. This is known as ‘Reference characteristic’.
    · For changing BOM quantity Characteristic is created with table name STOP-MENGE is used.
    · For Variant pricing purpose SDCOM-VKOND is used.
    · Characteristics allow describing and distinguishing between objects, such as length, color, or weight within the classification system.
    Procedure
    SAP Menu Logistic->Centralfunction->Environment->classification->Chracteristics
    Transaction Code CT04
    · From the classification menu, choose Characteristics.
    · Enter data on the initial screen.
    · In the Characteristic field, enter a name for new characteristic
    · Enter a change number if you want to create the characteristic using engineering change management.
    · To do this, choose processing type Create characteristic.
    · You can also copy the data of an existing characteristic. Use the pushbutton Create by copying. Enter the name of a characteristic you want to copy.
    · Confirm the entries.
    · On the Basic data tab page enter the most important control data for the characteristic.
    · You must maintain the basic data for all characteristics. All other screens are optional.
    · In the formatting data for value assignment, whether a characteristic is single-value, multiple-value, or retractable is defined. It is not possible change the value assignment indicator once it has set. It applies wherever the characteristic is used.
    · The data type of the characteristic determines which values can be entered for the characteristic. I can any one of the following
    - Characters
    - Numeric
    - Time format/Date format
    - Currency format and
    - User defined data type.
    · For numeric characteristic it need to maintain that whether interval values to a numeric characteristic, or only individual values need to be maintain in Basic Data screen itself.
    · Languages in which characteristic want to describe are entered.
    · Choose the tab page Values.
    · Enter values in the entry fields. Enter each value in a separate field.
    · The values must match the format that you defined on the Basic Data screen. You can enter up to the number of characters that you defined in the format.
    · If your characteristic is an alphanumeric characteristic, enter a language-dependent value description. You can enter up to 30 characters.
    · It is not possible to enter a language-dependent description for numeric values
    · It is also possible to define one value as a default value. This value then appears as a default in characteristic value assignment functions
    · Additional value indicator determines that whether values that are not defined as allowed values can be assigned to a characteristic
    · The following value check strategies are available in value maintenance screen.
    - Allowed Values:
    - Check Tables
    - Function module
    - Catalog character
    · Allowed values permits only values defined in characteristics maintenance are used to check a characteristic value
    · Check table permits only values entered in characteristics maintenance is used to check a value
    · Function module entered is used to check characteristic values.
    · Value catalog entered is used to check characteristic values
    · Documents, such as drawings or photographs, with characteristics can be linked in additional data screen. Before link a document to a characteristic, it must create a document info record in the document management system.
    · In this screen it also possible to restrict or hidden or displaying only allowed values to characteristic.
    · It is possible to that characteristic can be only assigned to particular class type by assigning type in restriction screen.
    · To change a characteristic selects the pushbutton Change in characteristics after entering the characteristic. To display the characteristic chooses the pushbutton Display.
    10.1.4 Creating Class:
    Purpose:
    · A class is used to hold the characteristics that describe a configurable material. By linking the class to the configurable material, you allow the material to be configured using the characteristics of the class.
    Procedure
    SAP Menu Logistic->Central function->Environment->classification->Class
    Transaction Code CL01
    · Class holds all characteristics describe configurable material.
    · Class with class type 300 is used in configuration profile.
    · On basic Data screen class description, its status is entered. Status determines:
    · whether a class can be maintained
    · whether objects can be allocated to a class
    · whether the class can be used for selecting objects
    · Class group is used to group together related classes and also for finding classes quickly via a matchcode.
    · ‘Same Classification ‘indicator determines whether system check for identical characteristic values. In this case, where several objects are assigned that have the same values for all characteristics to the same class. Depends upon indicator system give warning or error message or no message.
    · Keyword string is used for finding a class via matchcode.The description entered on the basic data screen serves as the first keyword
    · On characteristic screen list characteristic which has to attach with configurable material is entered.
    · Using document tab screen it is possible to assign documents related to configurable object.
    · On additional data screen whether or not this class can be used as a class component in bills of material. If it is yes then Unit of measure in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure (alternative units of measure) to the base unit of measure and resulting item category which will replace this class item in BOM (i.e. Stock, Non-stock item etc…).
    10.1.5 Creating Dependency
    Purpose
    Dependency describes the interdependencies between characteristics and characteristic values and it controls which components to be selected from a bill of material (BOM) and which operations to be selected from a task list. It also changes the field values in BOM items and operations during configuration.
    Procedure
    SAP Menu Logistic->Central function->Variant Configuration->dependency->Single Dependency->Create Dependency
    Transaction Code CU01
    · From the variant configuration menu, choose Dependency -> Single dependency-> Create
    · In initial screen name of the dependency is entered. If dependency need to create for a specific date, enter a change number. It is also possible to create dependency by copying from existing dependency.
    · On basic data screen the following data are required to enter
    - A language-dependent description for the dependency
    - Also possible to enter descriptions in different languages by choosing Descriptions.
    - Long texts for the dependency, choose Extras -> Documentation.
    - In the standard R/3 System, the status ‘In preparation’ when a dependency is created first time. The status is set to ‘Released’ when the source code is syntactically correct.
    - Finally suitable dependency type is selected.
    · In Dependency editor the source code for the dependency is entered. Once the source code is syntactically correct, the source code is saved.
    · Now the status of the dependency is turns to ‘Released’. Save the Dependency and exit.
    10.1.6 Changing Bill of Material (Assign Dependencies)
    Purpose:
    By assigning dependencies to BOM components, it is possible to restrict the selection of irrelevant variant parts.i.e correct BOM components are get selected at result of configuration. It is also possible to change the component quantity depends upon characteristic value changed.
    Procedure
    1. Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Production ® Master Data ® Bills of Material ® Bill of Material ® Material BOM ® Change
    Transaction Code CS02
    · Dependencies are assigned with respect to characteristic for each variant part.
    · Dependencies are created either locally within object or globally which can be assigned to any objects.
    · In BOM General Item overview screen choose the component in which dependency need to assign and choose menu path Extras -> Dependency -> assignment of dependency for assignment.
    · It also possible to enter dependency directly in BOM itself by choosing Extras -> Dependency -> dependency editor.
    10.1.7 Creating Configuration Profile
    Purpose
    · Configuration profile used for assigning configurable material with variant class (300) and also used to maintain some central settings.
    · It is possible to assign more than one configurable profile for one KMAT material.
    · The selection of profile depends upon either by priority or by manual selection.
    · It is also possible to assign dependencies to configurable profile.
    · Class with type 300, which hold the entire characteristics of KMAT material, are assigned to each profile
    Procedure:
    Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Production ® Master Data ® Material Master ® Environment ® Configuration Profile ® Create
    Transaction Code CU41
    · From the Variant Configuration menu, choose Configuration profile->Create.
    · A dialog box will be displayed. The object name is entered. Confirm your entries.
    · On profile overview screen the following data need to be entered.
    · Profile name and the class type of classes used for configuration. In Customizing for the Classification System, the class type must be defined as a variant class type.
    · Choose Goto -> Class assignments or the ‘Class assignment ’ pushbutton to assign the object to a class.
    · In the classification screen, names of the classes are entered.
    · It is possible to restrict allowed characteristic values for the configurable object if required.
    · Release of profile is possible only if configurable object is assigned to a class. To go to the detail screen, where you define further settings, choose the Profile detail pushbutton or double-click on the profile.
    10.1.7.1 Optional Settings on the Profile Overview
    · Organizational Areas
    You can specify organizational areas for configuration. If you restrict a profile to specific organizational areas, you only see the characteristics that are relevant to your area when you configure the object.
    You can change how characteristics are displayed according to organizational area for your user on the value assignment screen.
    · Priority of Configuration Profiles
    You can create several configuration profiles for a configurable material. The profile with the lowest number has the highest priority.
    If you define several profiles for an object, you see a dialog box for selecting a profile when you start configuration. The profile with the highest priority is at the top of the list.
    The priority is also relevant if you use Application Link Enabling (ALE) or intermediate documents (IDocs) to run configuration, rather than dialog mode. In this case, the profile with the highest priority is selected for the object. Profiles that have no priority are at the top of the list, because they automatically have priority 0.
    10.1.7.2 Profile Detail
    · Configuration Profiles for Materials
    The configuration profile has several screens. Depending on what you enter for the BOM explosion and configuration process, fields are shown or hidden.
    The parameters you maintain for a material apply to the material as a header material in a BOM structure. You cannot define separate settings for use of a configurable material as an assembly in a BOM.
    - By choosing the Assignments pushbutton, you can assign dependencies to the configuration profile. You also see this pushbutton on the basic data tab, once at least one dependency is assigned.
    · Basic Data Tab
    - In the basic data, click on the profile overview data.
    - If configuration process need to starts with a Start logo, documents are assigned such, as a graphic showing the product you want to configure, to the variant class.
    - Configuration Initial Screen Tab
    · Configuration parameters
    - The parameters for BOM explosion and the configuration process in the sales order are specified here.
    - BOM application must be entered, if BOM explosion ‘None’ is selected rather than single and multi level explosion is selected.
    - By entering a level of detail for a multi-level configuration, system performance will be improved.
    - It is also possible to define a filter and set the indicator for an availability check on assemblies.
    10.1.8 Changing Configuration Profile: Add User Interface Settings
    Purpose
    Settings for the configuration editor in user interface.
    - An interface design is used to group characteristics together on the value assignment screen.
    - Here it also possible to define object-specific settings for functions in the configuration editor. These settings are defaults for configuration, and can be overwritten for your user in the configuration editor.
    - For all configuration parameters except BOM explosion ‘None’, manually select the screens for the configuration editor and define which screen configuration starts with. The start screen must be one of the allowed screens.
    - The indicator for the configuration browser independently of the other start screens can be selected, because the browser is an additional screen section.
    Configuration Profiles for Objects Other than Materials
    - Object-specific settings for displaying characteristics and characteristic values in the configuration editor can be defined. These settings are defaults for configuration, and can be overwritten for your user in the configuration editor.
    Procedure
    Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Production ® Master Data ® Material Master ® Environment ® Configuration Profile ® Change
    Transaction Code CU42
    10.1.9 Configuration Simulation
    Purpose:
    · Configuration simulation is used to check the configuration model. In the configuration simulation, the whether or not Object structure is created correctly and dependencies are working fine is checked.
    · Simulation of Sales/Engineering
    - The configuration parameters in the configuration profile apply. Whether the configuration is simulated from the sales point of view or the engineering point of view is defined.
    - If select Sales & distribution is selected the configuration in a sales document will be simulated (sales order or quotation), so the BOM explosion depends on the settings in the configuration profile.
    - If Engineering is selected, the configuration in order BOM processing will be simulated. The configuration and BOM explosion depend on the configuration parameters in the same way as when maintaining an order BOM. For example, we cannot configure the header material, because the configuration is copied from the sales order.
    · Simulation of a Planned Order
    - On the characteristic value assignment screen, we can choose Planned order to display the components that are determined in material requirements planning (MRP) according to the characteristic values assigned. This is especially relevant to assemblies whose BOMs are exploded in MRP, not in Sales & distribution (for example, assemblies with the BOM explosion setting None in their configuration profile).
    Procedure:
    SAP R/3 menu Logistics ® Production ® Master Data ® Bills of Material ® Environment ® Variant Configuration ® Environment ® Configuration Simulation
    Transaction Code CU50
    · On the initial screen of the configuration simulation, select BOM to display the entire structure on the result screen.
    · If you have created more than one configuration profile for a material, you see a dialog box. Select a profile and choose Continue. If you want to call detailed information on the profile, choose Profile Detail or double-click on the profile.
    · To display the task list of an assembly on the result screen, select the assembly and choose View ® Objects ® Task list.
    · You see the operations or activities in the task list that was selected for the assembly during configuration.
    · Operations that have been changed by dependencies have an information icon next to them. You can display changes by choosing Information.
    · To return to the BOM explosion, choose View ® Objects ® BOM
    10.2 Sales and Distribution
    10.2.1 Creating Condition Records - VA00
    Purpose:
    The purpose of this activity is to create condition records for VA00.
    Procedure
    1. Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Sales and Distribution ® Master Data ® Conditions ® Select Using Condition Type ® Create
    Transaction Code VK11
    · Create price for each value of the characteristics by select using condition type VA00.
    · Create the Price for the condition type that represents these types of the standard-delivered condition type for this functionality is “VA00.”
    · Condition type VA00 requires as key fields the sales Organization, distribution channel, and material number of the configurable.
    · Condition type PR00 used to maintain base price of the configurable material.
    · Using VA01it is also possible to maintain Surcharges and discounts.
    10.2.2 Condition records for Variant Price and Surcharges
    Purpose
    Condition records allow you to store and retrieve pricing data in the system. All the pricing elements of your daily business - the prices, discounts, and surcharges for freight and taxes - that you want to use for automatic pricing must be stored in the system as condition records. You can define as many condition records as you want for the different pricing elements for any validity period.
    You create condition records for all the pricing elements that the system takes into account during automatic pricing. During document processing, the system transfers data from the condition records and determines the amounts for individual pricing elements (prices, discounts and surcharges) and the final amount for the sales document
    Procedure
    10.2.2.1 Create a characteristic for the Pricing
    - Create Pricing characteristic like CAR_Pricing and go to additional data tab give SDCOM table name VKOND field name.
    SAP Menu Logistic->Centralfunction->Environment->classification->Chracteristics
    Transaction Code CT04
    10.2.2.2 Assign the characteristic to the class
    Assign given characteristics to class, In variant configuration, a class is used to hold the characteristics that describe a configurable material. By linking the class to the configurable material, it allows the material to be configured using the characteristics of the class. In the standard R/3 System, the class type for configurable material is 300.
    SAP Menu Logistic->Central function->Environment->classification->Class
    Transaction Code CL01
    10.2.2.3 Create a dependency that triggers the price
    A Dependency is a rule that defines how the different options and option values, represented by characteristics and characteristic values, relate to one another. To create a dependency, follow the menu path
    SAP Menu Logistic->Central_function->VariantConfiguration->dependency->Single Dependency->Create Dependency
    Transaction Code CU01
    10.2.2.4 Assign the dependency to the characteristic value that triggers the price
    For example eCar2002, the value “V8” refers to the engine selected by the customer. Therefore, the dependency must be linked to the value “V8” of the characteristic that represents the engine type. To do this, go to the master data record of the characteristic CAR_ENGINE
    SAP Menu Logistic->Centralfunction->Environment->classification->Chracteristics
    Transaction Code CT04
    Go to the “Values” tab. From there, select the“V8” entry and use the menu path Extras Object dependencies Assignments, which brings you to the screenshot to the right; if you have created a global dependency, you can link it to the characteristic value.2 Once the dependency has been assigned, the information on this screen, such as the description (“Engine price”), will default to the information entered when you created the characteristic.
    10.2.2.5 Create variant price
    Create price for each value of the characteristics using condition type (or transaction VK11). Create the Price for the condition type that represents these types of the standard-delivered condition type for this functionality is “VA00.” Condition type VA00 requires as key fields the sales Organization, distribution channel, and material number of the configurable.
    In the same way using condition type VA01 is also used to maintain prices for surcharges and discounts.
    10.2.2.6 Creating the output condition records for sales
    Output types are used to represent various forms of output in the SAP system. Examples of output types in Sales and Distribution processing are order confirmations, freight lists, and invoices. You use the output type to control how the output should be transmitted, for example whether an order confirmation should be sent via EDI, or be printed
    10.2.3 Creating Output Condition Records: Sales
    Purpose:
    Output types are used to represent various forms of output in the SAP system. Examples of output types in Sales and Distribution processing are order confirmations, freight lists, and invoices. You use the output type to control how the output should be transmitted, for example whether an order confirmation should be sent via EDI, or be printed
    Procedure
    1. Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Sales and Distribution ® Master Data ® Output ® Sales Document ® Create
    Transaction Code VV11
    · Choose Edit >Key combination
    · Select the key combination for which condition records are to be created.
    · Choose Enter.
    · Enter the appropriate key for each condition record, according to the key combination you selected.
    · For transmission medium 1 (Print output) or 7, you can maintain the communication data. To do this, choose Communication.
    · Save the condition records.
    10.2.3.1 Creating Output Condition Records: Billing
    Purpose
    The purpose of this activity is to create output condition records for billing. Output types are used to represent various forms of output in the SAP system. Examples of output types in Sales and Distribution processing are order confirmations, freight lists, and invoices. You use the output type to control how the output should be transmitted, for example whether an order confirmation should be sent via EDI, or be printed
    Procedure
    1. Access the activity using one of the following navigation options:
    SAP Menu Logistics ® Sales and Distribution ® Master Data ® Output ® Billing Document ® Create
    Transaction Code VV31
    Enter an output type.
    · Choose Edit >Key combination
    · Select the key combination for which condition records are to be created.
    · Choose Enter.
    · Enter the appropriate key for each condition record, according to the key combination you selected.
    · For transmission medium 1 (Print output) or 7, you can maintain the communication data. To do this, choose Communication.
    · Save the condition records.
    10.2.4 Order BOM
    Purpose:
    Products that are made to order in plant engineering and construction and mechanical engineering are generally very complex and are specific to one customer. For this reason, you cannot define a BOM entirely in advance. Once you have created your sales order, you need to make manual changes to the BOM by creating an order BOM especially for the sales order, without changing the original BOM.
    The sales order, sales order item, and material number identify an order BOM. In variant configuration, you can work with 2 types of order BOM. The difference is in the way they are saved.
    Knowledge based order BOM
    The order BOM is saved as a copy of the super BOM with manual changes and dependencies.
    Result Oriented BOM
    The configuration result is saved as an order BOM, with manual changes but without dependencies.
    Procedure (For knowledge based BOM)
    SAP Menu Logistics ® Production Planning ® Master Data ® Bills of Material -> Order BOM Maintain (Multi-Level)Transaction Code CU51
    · The Create Order BOM: initial screen appears.
    · Enter the sales order number, the order item, the material number and the BOM usage
    · If you want to use material BOM, or an existing order BOM to copy from, go to step 4. If you want to create an order BOM without a reference, click and go to step 7
    · You cannot use a configurable BOM as a reference
    · Click on copy order BOM or Click on copy material BOM
    · The Copy material BOM or Copy order BOM dialog box appears
    · Enter the data required and click . The item overview appears, for the bill of material you are using as a reference.
    · Enter new items and alter items if necessary. Entering items in order BOMs is similar to entering items in material BOMs. However, you
    Create a Material - KMAT type with Item category (002)
    Create Characteristics in CT04 - Zbike, where in values mention the Color of the bile like Red, Blue etc
    Create another characteristics in CT04 - ZPrice, where directly go the additional data tab and maintain the table SDCOM and field VKOND (ABAP Dictionary it will ask for)
    Assign these two characteristics to a Class in CL01 – Zbike class (Type 300) in characteristics tab page.
    Then go to CU41 Configuration profile select the material and enter the description click on the class assignment ie assign Zbikclass.
    Now go back to CT04 - enter Zbike -go to values- select Red- go to extras - Other Dependencies - Select Procedure enter in front 10 write - $self.ZPrice='Red' and save
    Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
    Now select Blue- go to extras - Other Dependencies - Editor - Select Procedure enter in front of 10 write - $self. ZPrice='Blue' and save
    Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
    Now go to VK11 - Enter VA00 (Condition)(For Std RVA001 Pricing Procedure) - enter variant Red and Blue give the rates accordingly and create the sales order.

  • Can I over-ride the default setting in Organizer to allow sorting photos by filename ?

    I am converting slides from the 1970's and 80's to digital files and using PSE 8 to Organize them but it is important to me that they stay in the order of the file name I give them and NOT "Date: newest first or last" because it would seem that PSE, in the absence of metafile information, uses the date and time I uploaded the file to the Organizer as the "Date:".  ACDSee has a much more sensible arrangement in giving me full control of how my photos are sorted.  I am being driven to using ACDSee as the organizer and PSE as the photo editor, a not very convenient arrangement.  So my question is, "Can I over-ride the default setting in Organizer to allow sorting photos by filename ?"

    The type of file system that you're trying to set up, is actually done better by creating you own file heirarchy in Windows, and then viewing by import batch.  For example; you might create a top level folder "My Slide Scans", then perhaps, "My son John". So, the scans of john all go in the same folder, you import the folder in one batch, and you're where you want to be.
    That said, PSE will fight you at every turn to do this, since with the scanner hooked up with PSE, PSE is going to want to store your photos in "scanned photos" and import them as you scan them.
    I woud suggest this.  After the scan and import, use PSE to move the photos to their final destination folder, say " Hawaii 1994", and create a tag of the same name". Then when you're done scanning photos of this event, use the tag to view all the scans at once. Then, delete all the photos from the organizer. (Yeah, sounds radical I know). Take heart! All you've gotta do then is to reimport the whole folder. All the same name photos will be in one import batch. And with all the photos of any given topic in one folder, you'll be able to also use Windows Explorer in any number of modes to view the photos outside PSE.
    Keep in mind you can rename batchs of photos by selecting them, or by import batch or even tag, then "Ctrl. > Shift > N" will bring up the name change dialog box.
    This technique is quite contensious, but, it makes a whole lot more sense than storing all your photos in the "My Photos" folder on the "C:/" drive where any viral or malware hiccup might cause the necessity of a reformat, which could cause the loss of years of work.
    If a name search is a priority, that would be "Ctrl ."Shift" > "K" then type in whatever your heart desires.
    Caution: Before attempting a delete/ reimport manuver, Alway, always, write the tag and file info to the photo. "File" >"Write Tag and Properties Info to File".
    I always am quite adamantine about suggesting that you do NOT use the same physical HDD that contains Windows to store your photos, that's just asking for trouble. HDDs are quite cheap nowadays, and they're worth every penny in piece of mind. Plus to use a storage ("Volume") drive, you have to create your own file heirarchy anyway, so that leads right back to the beginning of this discussion.

  • Save As dialog box sort order

    I have a user with Adobe Acrobat 7 Standard installed on Windows XP SP3.  When they go to save a pdf document, the Save As dialog box is in list view and not sorted by folder/file name by default.  So, they have to change to Details view and then change the sort to be by name.  They have to do this every time they save a document.  Is there a way to change this?  They would like the sort order to be by name every time they open the Save As dialog box.

    Hello,
    Can you please follow these steps and provide the value for the configuration 'browser.download.useDownloadDir'
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page.
    Can you please provide the values for the following keys
    #browser.download.useDownloadDir
    #browser.download.lastDir
    Thank you

  • Sort order by custom comparable logic

    Hi All,
    Is it possible to sort the records from NamedCache.entrySet() by implementing Comparable<T> in my pojo?
    Thanks,

    user1096084 wrote:
    Thanks for your quick response.
    My requirement is to fetch objects without filter but with custom sort order and
    I couldn't find any method in QueryMap for this purpose.
    What will be result if implement Comparable interface in object?Hi,
    1. You can always use AlwaysFilter.INSTANCE for filtering.
    2. You can use a parallel aggregator to parallelly presort objects and also limit the number of objects you fetch.
    Implementing Comparable with the objects allows you to call entrySet(Filter, Comparator) with null for comparator. The method entrySet() without parameters or the entrySet(Filter) do not sort regardless of whether your objects implement comparable or not.
    Best regards,
    Robert

  • Photoshop CS3 web gallery bugs(?); vanishing metadata, bad sort order

    Running OS 1.5.4 on 24" Imac, I'm attempting to generate a "horizontal slideshow" from bridge-selected files in Photoshop CS3.
    [Sounded like the problem in this post: http://www.adobeforums.com/webx/.59b5a9fe/2 but on re-reading I've decided it's different so I'm giving it it's own thread, with more detail...]
    Here's my experience:
    1) Description and title show up for a second on the first slide, then revert to just the blank template on that and all subsequent slides (title: [blank] description: [blank]....
    Hitting "refresh" produces the descriptive metadata for a tantalizing moment, then it' s back to the blank template for this and all subsequent slides. It does this both for Safari and Firefox.
    You can view this behavior in a slideshow at http://oasisdesign.net/projects/earthtoilet/
    If it asks for a password, use---
    user:earthling
    pass: draf1 )
    "preserve all metadata" is checked.
    I've tried all combinations of checking/ unchecking "title, description, filename" for labeling...also, making slideshows with just one or two slides to reduce the chance that it's a weird character issue of the type some other folks have experienced...
    2) additionally, the web gallery is not respecting the manual sort order in Bridge, which is the source of the files. The help files say the slideshow should follow the manual sort order in Bridge.
    3) Finally, metadata entered in bridge metadata tab sometimes vanishes, sometimes metadata entered in file info wouldn't show in the metadata tab.
    Thanks for your help!!
    Art
    BTW, here's the related issues I found:
    http://www.adobeforums.com/webx/.59b5a9fe/2
    ...After some investigation, I found that the descriptions were disappearing only for photos that had a Return / Line Break in the description. If you go back and make sure all of your descriptions are a single line, it works fine....
    =Don't have line breaks, nor "and" nor &...
    http://www.adobeforums.com/webx/.3bff9de1/0
    http://www.adobeforums.com/webx/.3bd62ec3/0

    OK...here's the hack I used to get around what I'm now totally convinced are program bugs and shortcomings relative to advertised functionality, for anyone else who has to deal with this, followed by my (suggested fixes to Adobe)...
    1) Sort everything the way you want in bridge.
    2) Make meta descriptions w/o weird characters (a warning here would be helpful)
    3) Use "batch rename," with "copy to another folder" to give the images totally plain vanilla, DOS-style file names (001.jpg, 002.jpg...). This solves most filename issues and the works around web gallery's failure to recognize bridge sort order in one go. Note that you can irrevocably screw up the names of all your original files if you're not very careful to COPY at this step.
    ([a] make the bridge sort work directly, as advertised, por favor. [b] add an error message or warning about file names such as 006-(2).jpg causing malfunction. A compassionate, low-effort short-term patch for Mac users of web gallery, especially since bridge generates that particular sort name itself invisibly and automatically if you move a file with the same name into a folder)
    4) Use "white on black" instead of bug-ridden "horizontal slideshow" (horizontal slideshow should be fixed or deleted from the next version...multiple slideshow options would be awesome, as they advance automatically at the max rate the user's bandwidth allows, a very attractive feature)
    5) Restrict all images to the same height so users can click *in the same spot* to advance the 200 images with less carpal tunnel (the advance arrow should *always* be in the same spot, for every web gallery, IMHO)
    Web galleries are a fantastic tool for sharing information easily...I hope to see some evolution in those great automatic updates someday...

  • Document library items are not displaying in sorted order in sharepoint 2013

    Hi,
    I have a document library , I am storing document sets on it.
    28326 items are there in the library.
    I have configured sort on Name columns. Initially items are displaying in sorted order like (A,B,C,D,E...)
    Now Items are not displaying in a sorted order it is displaying like (A, B,C,D,E,A,C...) like this.
    Please help me on this sorting issue.
    Thanks,
    Samir

    Are the documents displaying in your image inside the document sets?  If so then your sets (folders) are displaying in alphabetical order and the documents inside the sets are displaying in alphabetical order.  This is what i would expect.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Default photo sort order on IPhone syncing with iPhoto

    Is there any way to get the Photos app on my IPhone 4 with iOS 6 to stop displaying my photos and events with the OLDEŚT pics and events at the top - displayed first?. 
    This means I can only get to my most recent events after extensive screen scrolling through my library of 4700 photos. 
    I have iPhoto on my iMac successfully configured to show most recent events first (at the top) but when I perform an ITunes photo sync this sort order reverses !
    Apple programmers, are you listening ?

    1. No Apple programmers. Or any other Apple people are not listening. This is, as explained in the TOU you agreed to, strictly a user to user support forum. No Apple involvement
    2  you want answers about iPhoto for UOS but are posting in the iPhoto for Mac forum. Posting in the correct forum will greatly enhance your possibility of getting a correct answer
    3. I will request that you post be moved
    LN

  • Wrong sort order for rapid sequences of images

    When I have a sequence of shots taken at high speed, i.e. a number of them have the same timestamp, being taken within the same second, I find that LR displays some of them out of order. For instance, I have a sequence of 5 frames all with timestamp 9/4/07 2:17:32pm and the file names show up in this order - 1740, 1742, 1741, 1743, 1744 (these are the file names assigned by the camera)
    The frames show in this order with any of the sort order options selected except, of course, File Name, and in that one instance they display in the correct order.
    Is there a way I can specify in LR that I want to sort in Capture Time order then within that in file name order? This would give me the result I want. The reason I don't want to simply use file name order is that with images from different cameras with differing file naming conventions, or with file names I may have applied, that would not give me correct time sequence as shot. I want to see a whole day's images in correct time sequence regardless of file name.
    If there is not a way to specify this in LR, should I add this to the Feature Request list?

    Capture Time and Import Order do the same thing.
    Additional information - I see the same wrong sequence is presented in the import dialog when I try to import the same photos again (they happen to still be on the card). So, I think it is initially caused by the order that the camera lays down the photos in the file structure on the card, or in the way that Windows reads them off the disk. (I have a Canon EOS 30D, SanDisk CF card, using a card reader rather than plugging the camera to the PC.)
    If I use the import dialog's renaming process (in my test I chose filename - sequence) and apply a sequence number to the images the sequence number ends up wrong. So LR is importing the photos in the wrong order (may not be LR's fault?)
    So, this modifies the definition of the problem and of the feature request. No longer is it simply the sort order displayed in the library; it needs to be addressed at import time as well.
    Here is my attempt to redefine the feature request:
    - when importing images that are taken in rapid sequence (multiple shots within the same second) LR should allow for sorting the images by camera-derived file name to correct out-of-sequence delivery from the card/camera. This sort order, when selected, should re-arrange the preview thumbnails so the photographer can verify the images will be imported in the correct order.

  • IPhone photo album file name sort order

    I have a folder with photos in it on my Mac.  When I sync the folder to my iPhone and view the photos on the phone, the photos are not displaying in file name sort order.  The file names of the photos are numbers (001, 002, 003 etc.).  It seems the photos are being displayed in date created order and not in the file name order.  The album with photos on my Mac is arranged / sorted by the name when syncing.
    Is there a way to have the photos in the iPhone album displayed in file name sort order?
    Thanks,
    David

    Focus Point (not free, no ads) will allow you to rename the files, add descriptions, and sort in a variety of ways. But it won't let you do anything in the main screen except browse your photo albums or camera roll, select one, and then you can do a search within that album or camera roll--and then if and only if the photo has a filename or description can you search for it. Bottom line: be sure to give your photos a proper file name and add a description.

  • ITunes U Sort Order Issue

    I purchase a lot of audio courses from a company called the Teaching Company. I buy and download them as MP3's and they've worked great on all my iPods (I have a nano, a classic, and a touch 64GB). I previously kept all of the course lectures in my Audiobook section to keep them separate from my music and podcasts and other media. This was fine until I decided to purchase an Audible account and began to build up a large library of audiobooks as well. When I got my brand new 64GB iPod Touch and the new iTunes, I saw that iTunes U was now a separate entity within my library. So, for organizational purposes and to allow me to better fine-tuning of my sync preferences (I much more media than could ever fit on any of my iPods at one time), I moved all my educational and lecture media out of my Audiobooks area and into iTunes U by editing the tags through "get info".
    This has worked just fine except for one mysterious problem.
    When I view any of these audio courses (each course is an album) in iTunes, they display fine in normal sort order by track number. But when I go to listen to them on my iPod, the sort order is all jumbled up and all the tracks are out of order. So I cannot listen to the classes from one lecture to another, at the end of each lecture I must exit back to the album and FIND the next lecture. They appear to be sorted in no obvious order (not alphabetical, not by name, not by track number). Again, they are set to sort by track number in iTunes and they display (and play) perfectly straight through in iTunes. But on my iPod, the sort order is completely messed up.
    So, what's going on? Why? And how can I fix it??

    Vague789 wrote:
    Set your track numbers correctly (by right clicking, clinking 'Get Info' and clicking on the info tab), and make sure you also set the totals (e.g. 12 of 18 - the "of 18" is what I mean by the totals). This sorted it out on my iPod.
    This worked for me for my Teaching Company files. They were all jumbled previously because they took the track numbers from the default import from the internet. Once I changed it, no problem.
    It would be better if Apple allowed just a dragging, or if there was a quick tool, but at least this works.
    I had previously been using "Join Together" for stuff like this. I think I like this method better, though. I can still keep the individual lecture files on a playlist, but not have to worry about all the separate titles in a general listing.

  • Sort order notes iOS 6.0

    Since it is finally possible to sort my Notes with MacOS 10.8.2 I am desperately seeking for the same possibility on my iPhone and iPad (iOS 6.0). It does neither use the sort-order (alphabetically!!!) from my desktop Mac nor am I able to change the sort-order on my iPhone. This is really a pain! Any solution out there???
    Please Apple, if you dont want to allow the users to make their own choice of sort order, at least let them use and transfer the sort order they have on their Mac!!!
    By the way: same problem with photos! With iOS 6.0 the devices do NOT use (anymore) the sort order of my iPhoto-folders. WHY? Help!

    HI Friend,
    You must set the Cellular Data according (Settings>>General>>Cellular>>Cellular Data). Contact your carrier for further information.
    Turn on Cellular Data, Roaming and 3G as well, even your carrier doesn't have 3G available.
    Did you turn on Restrictions before?
    Hope it will be helpful

  • HT2470 Why does this not explain how to change the sort order?

    Why does this (i.e. support at Apple.com) not explain how to change the sort order? I can "arrange" by Date Modified for example but it won't let me switch to use most recent dates first. Also, what is Apple-speak for arrange versus sort anyway? It seems I used to be able to click on a column heading in finder and get a drop down arrow allowing me to change the sort sequence.

    Arrange roughly translates to "group the items in the folder." Sort is how each group is ordered. If you have arrange set to none, you can sort by anything. However, there is no way in the Arrange/Sort menu to choose the direction. The only way to do that is in the List View, and you must have Arrangement set to None.
    I've submitted an Enhancement Request to allow choosing sort direction from the Arrange/Sort menu, but I haven't ever gotten a response, which is good and bad. Good because they will often respond that they have considered it and don't plan on implementing. Bad in that they've haven't implemented it.

Maybe you are looking for

  • HELP wrong warranty expiring date!

    Hi I'm Italian so I'm sorry for my English Language. I recently bought a third gen Nano ( on 31st december 2007 ) but I got a problem with the display so I contacted the online support on the apple website. while doing this I had to check my warranty

  • Failure of some component

    Error message: Error on switching in renew: NS ERROR UNEXPECTED. Component returned failure code: 0x8000ffff NSERROR-UNEXPECTED [ns]PrefBranch.getCharPref] Id: none Everytime I try to open Firefox this message appears and is removed only upon a reboo

  • [Solved]Openbox3 Update

    I like the new default menu in openbox. It is much more, realistic/practical/useful. But, the new logout option kills openbox. It gives the All your base error. The exit option also prompts a 'cancel' or 'ok' option, whether you want it to or not. Th

  • I can't share to YouTube Anymore

    I was able to share to YouTube, then I deleted one video as it was processing in order to upload a new one with changes made. Now the video's that I send to youTube do not appear in my Uploads on YouTube.com. Help!!

  • I upgraded to FF 9.0.1 yesterday, how can I revert back to a lower/previous version?

    after the upgrade, i began experiencing difficulty within the email function in the ticketing system i use at work. specifically, when emailing from the ticketing system, the message appears in a larger, but different font. once the message is sent,