ALMOST THERE! NoClassDefFoundError and Visual J++ 6.0

Russel,
Can you help me get setup on Kawa?
I think I understand- partly- how it's configured, but I'm afraid
I'll spend a lot of time again before I get going.
I looked at your instructions on your site, but it's confusing to
me.
Things like <File Path> and <Output Directory>, are they to be
entered as shown exactly, or the actual values? If it's actual values, then
I'm stuck with the path of a single bean. If it's literally, then how does
it work?
Also, I have a source tree with several EJBs, all interfaces in one
directory, all bean implementation files in another directory, all
deployment descritors in yet another directory, and a single manifest file.
Can you post (or send me email) the STEPS involved? At least, can
you give me some tips, pointers, and examples of sample EJB, where I can
compile all java classes, run the 'ejbc' compiler, generate the serialized
deployment descritor, copy the manifest file, and create the ejb-jar file?
Your help will be greatly appreciated.
Thanks,
Murali
Russell Castagnaro <[email protected]> wrote in message
news:[email protected]...
Murali,
If you want to use a SERIOUS IDE try kawa from tek-tools. I've got awebsite
that explains how to have it deploy your EJB's and everything. Best ofall (IT
NEVER CRASHES!!!)
http://www.synctank.com/developers/kawa.customize.shtml
Murali Krishna Devarakonda wrote:
I'm sure I've been over this before, and it didn't work.
But hey, I don't care, as it works now!
Time to celebrate- and dump the buggy Visual Cafe into the dustbin!
Hooray!
(until the next project, when I'll be using JDK1.2, when I can't use
Visual
J++ again:~(
Murali
John Urban <[email protected]> wrote in message
news:[email protected]...
Insure that your classpath has /weblogic/classes somewhere in it?
Murali Krishna Devarakonda wrote:
This is my millionth attempt to debug WebLogic 4.5 inside Visual J++
6.0.
After a gap of 2 months, I tried again today. And lo behold, look
what
happened:
I actually have the stack trace!
And the exception is thrown by the WebLogic server!
Which means, I'm close- extremely close- to making it work!!!
Can someone please lead me to the finish line?
Here's the output:
The WebLogic Server did not start up properly.
Exception raised: java.lang.NoClassDefFoundError
java.lang.NoClassDefFoundError
at weblogic/t3/srvr/HttpServer.declareProperties (HttpServer.java)
at weblogic/t3/srvr/T3Srvr.configure (T3Srvr.java:721)
at weblogic/t3/srvr/T3Srvr.main (T3Srvr.java:781)
at weblogic/Server.startServerStatically (Server.java:85)
at weblogic/Server.main (Server.java:39)
>>>>
Thanks for your help.
- Murali Krishna Devarakonda

Similar Messages

I have FF5.0.1 installed but you keep sending me the "you are almost there" message and I have to delete it each time

Do not know how much more detail you need. Every time I open Firefox which is already Ver 5.0.1. What I get is the screen that says "You're almost there, but you have an old version of Firefox and need to upgrade to Ver 5.0.1. I am fed up with going thru this nonsense. I ALREADY AM USING VER 5.0.1. Sylvia Kuenemann

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

I down loaded Firefox 3.6.10, did the execution and still when load it as my browser I get a message that says "Almost there". What is going on?

When I load Firefox as my browser, a screen comes up that wants me to download the 3.6.10 version again but, as I said, it has been downloaded, executed and I have tried this several times with the same result. I run Vista Home Premium operating system. I can still browse the internet but still get my home page as "You are almost there" or some such. What should I do?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

TS3408 I keep on getting this error message on my Yahoo and Safari You're almost there, but your web browser doesn't support the newest version of Yahoo! Mail

I keep on getting this error message on my Yahoo and Safari all of a sudden;
You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
The links it gives to upgrade don't work !
I have Safari Version 5.1.7 the latest for Snow Leapord. I get the same error message on Firefox and Google Crome aI even dowmloaded another Brower for Mac still got he same error message ! I have used the Disk Utility to rparir files and rest Safari. I have deleated Firefox then downloaded a fresh version, still the same error messages ! Please help it's driving me nutts.

Perky --
You do not need any "Cleaner" app for Macs. I would not be at all surprised if that didn't actually damage your Mac, especially if it were MacDefender. Applejack is OK, but I'm not sure what it erased. Do you know?
You also don't need any Virus Barrier. That could also mess things up.
The fact that all of your browsers are now messed up indicates that it is not a Safari problem, but more system-wide.
Did you check here?
http://help.yahoo.com/l/us/yahoo/mail/yahoomail/technical/

My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

Hi,
In Messages on the Mac do you have the Preferences > Messages section set to "Save History when Conversations are Closed" ?
This will store all IMs and iMessages in ~/Library/Messages/Archive.
Use the Finder > Go Menu > Go to Folder and type that path into the Dialogue box that appears. (~/Library/Messages/Archive).
They are stored in dated folders so some guessing/trail and error will be needed.
You may find that if this was an iMessage and you send the person a new message that the whole History with that Contact since you installed Mountain Lion/Started Messages may appear and that it is scrollable the closer you get to the "top" and the top may keep moving until all is on show.
10:31 PM Monday; December 24, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Ipad is not restored.. it almost done loading and.it.say There was problem downloading the software for the ipad. the network connection was reset.. i turn off the firewall and antivirus

ipad is not restored.. it almost done loading and.it.say There was problem downloading the software for the ipad. the network connection was reset.. i turn off the firewall and antivirus.. It was almost donnIe like 5% away to be finish...

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Rmi almost there

rmi almost there
I did a version 1.1
javac -tareget 1.1 ct277/*.class
rmic -v1.1 rImp
put everything in a jar
compiled OK (so the class is seen in the build process)
but on execution I got:
Exception Details: javax.faces.el.EvaluationException
java.lang.NoClassDefFoundError: cts77/rInterface (wrong name: rInterface)
Possible Source of Error:
Class Name: com.sun.faces.el.ValueBindingImpl
File Name: ValueBindingImpl.java
Method Name: getValue
Line Number: 206
Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
Stack trace:
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:206)
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:154)
com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:389)
javax.faces.webapp.UIComponentTag.createComponent(UIComponentTag.java:1018)
javax.faces.webapp.UIComponentTag.createChild(UIComponentTag.java:1045)
javax.faces.webapp.UIComponentTag.findComponent(UIComponentTag.java:742)
javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:423)
etc etc...
ps I posted this yesterday but it is not there now
maybe
1) I posted to some other forum by mistake
2) SUN moderators removed my post because they think rmi topic is exhausted
3) SUN moderators removed my post because they have had enough of me.
if 2) or 3) could the moderator please email me so I dont go on posting in vain?
cheers
CTSkinner

I followed the stripped down example in
http://patriot.net/~tvalesky/easyrmi.html
then renamed Implementation rImp
and interface rInterface
server rServ
and replaced the method with a String function that returns "fred"
- as simple as I could make it
- it works with java Client from the command line.
When I put all the classes in a jar, and include the jar in a Creator project, the rImplementation class is found at Build time, but causes an immediate exception at execution time
(could there be a security problem? even though the error is ClassDef not found? I have my win2K user set at java allow all - which I hope is safe while I'm testing on 127.0.0.1)
I put this code in a button:
public String button1_action() {
String serverName = "127.0.0.1";
String cs = "ccc";
try
{ //bind server object to object in client
rInterface Servo = (rInterface) Naming.lookup("rmi://"+serverName+"/rImpInst");
cs = Servo.getSlug();
catch(Exception e)
cs = "Slug catch";
// Vanilla van = new Vanilla();
// cs = van.fudge();
FacesContext fc = javax.faces.context.FacesContext.getCurrentInstance();
fc.addMessage(null, new FacesMessage(cs, ""));
return null;
but note: the project raises exception immediately, before the button is painted
[the commented Vanilla.fudge is an ordinary non-rmi class which displays OK if
Servo is not defined]
note: cts77 is the package name. I get the same error if I explicitely say
cts77.rInterface.
I would be happier if no packages were involved, because rmic may not understand packages.

Hyperlinks do not work when exporting to PDF (Crystal and Visual Cut)

I have a question about Crystal Reports XI Release 2 and Visual Cut 11. I create reports in Crystal and export them using Visual Cut. Some reports contain hyperlinks to files on a network drive. However, the links only work while in Crystal. The PDF files that are printed through Visual Cut display the links, but they are not clickable. How can this issue be fixed?
In case it helps, the links also work when I export reports from Crystal to HTML, Word, and Excel, but not when I export to Acrobat. I believe it is a problem with tagging/accessibilityfeatures. So is there a setting/formula in Crystal or Visual Cut that would allow the exported PDF files to be accessible?

While Crystal exports to pdf indeed lose hyperlink functionality (both in Crystal as well as in Visual CUT), Visual CUT allows you to use Crystal formulas (acting as hidden Tags) to create hyperlinks in the resulting pdf file. Another option supported by Visual CUT it to automatically detect file references in the pdf text and turn them into hyperlinks. Contact MilletSoftware for more detail.
Edited by: Ido Millet on Oct 27, 2010 5:11 PM

Lenovo Yoga with Windows 8 Pro, Office 2013 and Visual Studio

For you developer types, I just wanted to post a message and let you know my experience with Lenovo Ideapad Yoga 13 as a development machine. I bought Lenovo Ideapad Yoga 13 from Bestbuy for $999.99. As expected, it came with a crap ton of bloatware installed by Lenovo.
Here is a summary of what I did to it (I take no responsilibity for accuracy of below information. You are on your own if you decide to follow them. I am just putting this down from my memory so that I can look it up in the future if I ever need to do this again).
INITIAL CLEANUP
Installed Lenovo hotfix for partition cleanup/merging: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS033035
Installed Lenovo Touchpad driver fix.
CAUTION: I take no responsibility for below steps. I am writing them from memory and if you decide to follow them and end up making your machine unusable, you are on your own as Lenovo might not honor your warranty.
BACK UP ENTIRE DISK (requires an empty USB flash drive for booting and another external USB drive for backup)
Copied Drivers from D_Backup folder to the external USB hard drive (plugged into USB 3.0 port).
Installed Paragon Backup & Recovery 2012 Free: http://www.paragon-software.com/home/br-free/
Created Paragon Backup & Recovery boot USB flash drive with default Linux recovery environment option (flash drive plugged into USB 2.0 port).
Shutdown Lenovo Yoga.
Plugged in the Paragon Backup & Recovery boot USB flash drive (USB 2.0 port).
Pressed the one key recovery button (next to power button). Went to BIOS.
In the BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
The machine booted into Paragon Backup & Recovery mode. From there, made a backup of entire disk to the external USB hard drive.
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and restarted the machine.
Logged into the machine and verified that everything was good and checked the external USB drive to verify that the backup image was present.
MAKE WINDOWS 8 PRO BOOT USB FLASH DRIVE (requires a second empty USB flash drive and a second computer with Windows 7. This USB Flash Drive has to be between 4GB to 32GB as Windows won't format 64GB flash drives to FAT32 mode)
(Note: I installed Windows 8 Pro in UEFI mode. See http://pcsupport.about.com/od/windows-8/a/install-windows-8-usb.htm)
You need a licensed ISO image of Windows 8 Professional Full version (not the upgrade version) from your MSDN or Technet subscription or create an ISO from the Windows 8 Pro full version DVD.
Download Windows 7 USB/DVD Download Tool on the computer with windows 7.
Plug in the second empty USB flash drive (has to be at least 4GB but less than 32GB) into the computer with Windows 7.
Using Windows 7 USB/DVD Download Tool and the ISO file, create the Windows 8 Pro bootable USB Flash drive.
Create a new folder on your computer disk, for example, C:\WIN8USB.
Copy all the files from your USB flash drive to the newly created folder (created in the previous step).
Right click on the USB drive icon in Computer window and select “Format…” from the context menu. Make sure you select “FAT32 (Default)” in “File system” drop down menu. Click “Start” and wait till the drive gets formatted. This step is needed because NTFS is not readable by BIOS in UEFI boot mode. During formatting, MBR is preserved so the thumbdrive is still bootable.
Copy all the files from the folder you created earlier (C:\WIN8USB, for example) to the formatted drive. Your Windows 8 installation USB drive is ready to install in UEFI mode.
WIPE THE DISK PARTITIONS
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
Booted into Paragon Backup & Recovery boot USB flash drive again. This time, I deleted all partitions on the primary disk (Disk 0). CAUTION: This WILL wipe your hard disk and will make your machine unusable!!!
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and shut down the machine.
At this point, the disk is wiped clean. All factory installed software and recovery partitions are gone!!!
INSTALL WINDOWS 8 PRO
Plug in the USB Flash Drive with Windows 8 Pro install files.
Windows 8 Installer would show the unallocated disk space. I can't remember the exact details but either I had to click on Delete or New to delete and then create a new GPT partition. The entire partition was about 119GB.
From that point, follow the Windows 8 Pro installation steps.
After booting up into Windows 8 Pro, plug the external USB drive that had the drivers folder backed up from D_backups.
Install all the drivers from this folder (I was able to install everything except for one Intel fast boot one because of missing partition but my Yoga still boots up just as fast).
Go to device manager to check and everything should be good now.
Run Windows Update.
You should now have about 101GB free on C: drive!!
INSTALL VISUAL STUDIO, SQL SERVER and OFFICE 2013 ON LENOVO YOGA 13
I installed the following in that order:
Microsoft SQL Server 2008 R2 Developer edition (I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2010 (I installed all components, everything!). Then I installed latest service pack.
Microsoft SQL Server 2012 Developer edition(I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2012(I installed all components, everything!)
I ran Windows update and also installed Nov 2012 updates of SQL Server Data tools.
I then installed Office 2013 Pro Plus.
MAKE LENOVO YOGA 13 MORE SECURE
Go to Control Panel and enable Windows Defender (it is included by default in Windows 8 and is anti-virus and anti-malware solution)
Enable full hard-disk encryption using BitLocker feature of Windows 8 Pro. Since Lenovo Ideapad Yoga 13 doesn't have hardware TPM, you have to enable password based option. For this, follow the steps here: http://rics.partners.org/show_article.php?id=274.
Basically, you go to GPEDIT.MSC and Open Computer Configuration => Administrative Templates => Windows Components => BitLocker Drive Encryption => Operating System Drives. From the right pane double-click "Require additional authentication at startup. Select Enabled radio button and check the box for "Allow BitLocker without a compatible TPM...". Click OK and close the policy editor. Then Right-click your C drive in the Computer folder, click Turn on BitLocker. Then select Enter a password instead of USB option. Then provide a strong password (make sure to write it down and put it in a SAFE place, if you lose the password, no one can boot into your hard disk). Then select Save to a file and save it to the External Drive. Select "Encrypt entire drive...", click Next. When this is done, you will get a pop-up on the lower-right a prompt to restart the computer. Restart your PC. Enter the encryption password created earlier. If you are successful in getting into Windows, you're all set.
I also hooked up to Skydrive and used BoxCryptor to encrypt my files in cloud.
The available free disk space should now be about 54GB.
I verified that Lenovo Yoga 13 works like a champ with no slowdown with Visual Studio 2010, Visual Studio 2012 and SQL Server Management Studio open simultaneously and Bitlocker enabled!
The keyboard right SHIFT key is small but other than that, it can work as a great portable development machine and Microsoft Reader is great for reading PDF eBooks.
So if you are a Developer on Microsoft platform, go right ahead. Lenovo IdeaPad Yoga 13 is great for running Visual Studio 2010 and Visual Studio 2012 (1600x900 resolution is totally usable) while on the move. Since I have only had this machine for a few days, I can't tell much about the long term reliability.
Solved!
Go to Solution.

Thank you for posting this. I am in this exact situation. I purchased a yoga 13, and installed Visual Studio Express 2012 for Windows Phone. As it turns out, the Windows Phone Emulator ONLY works in a Windows 8 Pro environment. Since the Yoga doesn't have a disc drive, I shared my W7 computer's cd drive, then put in Windows 8 Pro, so that it could install onto the Yoga. Well, after the installation was done, I tried running my program again and ran into the same issue. It prompted me that my environment must be Windows 8 Pro! I thought that Windows 8 Pro already installed but, what confuses me is that I see no indication that Windows 8 Pro installed. When I go to the System Window, it reads: "Windows 8". Should it read Windows 8 Pro?
Ultimately, I'd like to know, are you able to execute the Windows Phone Emulator? I'm not sure as to whether the Yoga has the hardware capability (needs to be SLAT enabled or something like that?), I HOPE it is able to, and judging by your post, it seems like it but I'd love to know your perspective on my approach.
Please let me know if this makes sense, as I'm new to this kind of thing but really want to start development for Windows Phone.

Release management with Azure and Visual Studio Online (Cloud TFS)

What strategy would you use to manage the releasing of versioned software to Azure cloud services (web and worker roles)? We are not looking for continuous integration. We are using Visual Studio 2013 and Visual Studio Online (Cloud TFS).
At one point, we were releasing straight from Visual Studio using the Azure Cloud Project Publish tool. This is really bad practice in my opinion as you can never be sure what you are really releasing. Additionally, there is no automated control on the labeling
or branching of code, or the running of unit tests and code analysis checks.
Next, we employed Release builds on Visual Studio Online. Before deployment, one would edit the appropriate Build Definition (whether it be for Test or Production by and filling in the code label (under the "Get Version" build property) that is to
be released. This would then get the appropriate code (by the label specified), build it, and release it to whatever cloud service is specified in the targeted Cloud Project profile (this is using the AzureContinuousDeployment.11.xaml template).
There is still a degree of manual intervention involved. Also, the fact that a version of code is built every time before it is released is not ideal (as far as I understand it would be better if it was packaged once).
Microsoft Release Management tools
look ideal for the job, but are not supported with Visual Studio Online.
Is there a better way of handling our releases?

/waves hand.. These are not the tools you seek. You are looking for continuous integration.
Although CI has the word continuous in there, it does not mean "all the time, every checkin". It can easily refer only to those bits you want to release - -and the way to tell the system which bits you want released is to merge them to a Releases
branch.
If you do this, not only do you get all the joy of controlled CI, but you guarantee what you release is exactly what is controlled in your SCM - under the Releases branch, preferably tagged or otherwise noted as a particular release. That means you can also
rollback to a previous release by simply reverting to a previous release in your SCM!
Of course you don't have to let it happen automatically, you can set it up to build 'continually' and then remove the check on the SCM to see if any changes have been committed. You can replace this with the manual build button.

Written and visual Instructions to disassemble OfficeJet K60

Hi,
I have an old HP Officejet K60 All in one that was only used a few times and then was put into storage. I recently brought it back out and tried to use it, but while trying to align cartridge the print head would move to the left then move back to the right next to the service station and would stall there for a couple of seconds while making this noise (sounds like it was trying to move, but could not) and then the print head would move to the left side and then back to the right (but not into the service station) then it stops there with a waring light blinking and beeps 3 times ("beep-beep-beep", "beep-beep-beep", "beep-beep-beep") and on the LCD screen it says "Clear Carriage Jam". I check and there was no paper jam in there.
I had a better look into my printer and saw a piece of something obstructing the print carriage from entering the service station. I touched it and it fell over and so I pick it out and it looks like a part that the printer cartridge stands on when in the service station. Took a better look inside with a flash light and it looks like the service station assembly area fell apart. There are parts broken and a spring that is not assemble but just laying around.
Would someone be nice enough to tell me where I might get written and visual instruction to open and replace that part of the service station? And does anyone know how much it might cost to have a printer technicion replace the part in the service station? ball park cost if possible. If I am unable to replace the part is it worth the cost of having a technician fix it or should I just buy a new printer? and I just bought new ink! gosh darn it! Thanks for any assistance.

Hi Johnfromglenver,
There are no Mac drivers for the HP Officejet K60 printer. Therefore it is not compatible with the Mac operating systems. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl. There may be other solutions that could work for you.
I hope this information helps.
Advance 23
I work on behalf of HP

From "Almost there" when opening firefox, attempt download takes me back to "Almost there" repeatedly.

I am unsuccessful in downloading the new 5.0.1 firefox version. I can't get past the "Almost there" screen because I download and click on the Firefox symbol to move it to the Applications folder, and when I move it from there to the Dock and open it, again, it says "Almost There." It tells me I can't perform this because I already have Firefox open, even though I have tried again and again to quit it. Do I need to delete every single vestage of firefox and start over with my bookmarks, etc. to make this work?

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

Sharepoint Mailbox, Almost There

I'm getting the following error message when I try to connect to my previously working sharepoint site mailbox:
Almost there!
We're not quite done setting up your site mailbox. Please check back in a few minutes. If you see this message in half an hour, contact your helpdesk.
X-ClientId: VHGX - VHSK - YTMA - IZNGW
X-OWA-Error: Microsoft.Exchange.Clients.Owa2.Server.Core.OwaExplicitLogonException
X-OWA-Version: 15.0.1024.12
X-FEServer: CO2PR06CA043
X-BEServer: BLUPR08MB183
Date: 9/9/2014 4:45:29 PM
Fewer details...
It's been like this for the last couple of days. It was working previously and I'm not sure why it all of a sudden stopped working.

Hi ,
For your issue, please take steps as below:
1.Open SharePoint Designer.
2.Connect to the SharePoint site where the site mailbox is stuck in provisioning.
3.Click on the Site Options button shown in the ribbon.
4.Locate all ExchangeTeamMailbox, there should be 4 entries.
5.Delete the entries, remove the site mailbox from the SharePoint site if still there and try to re-create the site mailbox.
Reference:
http://community.office365.com/en-us/f/148/t/207174.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Link Aggregation ... almost there!

Hi all
After struggling with Link Aggregation on Mac OS X Server to Extreme X450 switches we are almost there. We've now managed to get a live working link where the Ethernet 1 and 2 arew green and the Bond0 shows both links as active, and finally the Bond0 interface picks up a DHCP address.
So that's great, but no Network connection which is weird because it got an IP address.
Do we have to route the traffic over one of the other interfaces or something?
Any suggestions at all?
Cheers
C

Camelot wrote:
The first, or at least - most obvious, problem is that you have IP addresses assigned to each of en0 and en1.
This should not be the case. Only the bond0 network should have an IP address assigned.
The other interfaces should not be configured at all. That's almost certainly the issue since your machine has three IP addresses in the same subnet - one on each of en0, en1 and bond0. It's no wonder things are confused
Thanks that now works a treat!
Was hoping you could help on another set of ports again being configured for Link Aggregation. We have tried to set it up in exactly the same way but again its not working. The ifconfig returns back the following:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::219:e3ff:fee7:5706%en0 prefixlen 64 scopeid 0x4
inet 169.254.102.66 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:19:e3:e7:57:07
media: autoselect (1000baseT <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::219:e3ff:fee7:5707%en1 prefixlen 64 scopeid 0x5
inet 169.254.102.66 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:19:e3:e7:57:07
media: autoselect (1000baseT <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:1b:63:ff:fe:6e:6c:8a
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
bond0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:19:e3:e7:57:07
media: autoselect status: inactive
supported media: autoselect
bond interfaces: en1 en0
When I compared this to the working Link Aggregation ifconfig output I noticed this one has the line "media: autoselect status: inactive" as appose to active. Could this be the cause and how do I rectify it?
Thanks

Almost there - Java 1-1 mapping - but no binding

Hi
I am trying to create a 1-1 mapping for the latest event for a service, and am able to create a new OneToOneMapping in an amendment event for the service descriptor. This generates almost the correct SQL.
OneToOneMapping latestEventMapping = new OneToOneMapping();
latestEventMapping.setAttributeName("latestEvent");
latestEventMapping.setReferenceClass(ServiceHistory.class);
latestEventMapping.dontUseIndirection();
descriptor.addMapping(latestEventMapping);
ExpressionBuilder builder = new ExpressionBuilder(ServiceHistory.class);
Expression latestEventExp = builder.get("serviceId").equal(builder.get("service").get("serviceId"));
ReportQuery subQuery = new ReportQuery(ServiceHistory.class, new ExpressionBuilder());
Expression subQueryExp = subQuery.getExpressionBuilder().get("serviceId").equal(builder.get("serviceId"));
subQueryExp = subQueryExp.and(subQuery.getExpressionBuilder().get("eventDate").greaterThan(builder.get("eventDate")));
subQuery.setSelectionCriteria(subQueryExp);
subQuery.addAttribute("serviceId");
latestEventExp = latestEventExp.and(builder.notExists(subQuery));
latestEventMapping.setSelectionCriteria(latestEventExp);
This creates
SELECT t0.EVENTDATE, t0.EVENTCONT
ENT, t0.EVENTCOMMENTS, t0.EVENTSOURCEID, t0.EVENTTYPEID,
t0.SERVICEID
FROM
     SERVICEHISTORIES t0,
     SERVICES t1
WHERE (((t0.SERVICEID = t1.SERVICEID)
AND NOT EXISTS (
     SELECT t2.SERVICEID FROM SERVICEHISTORIES t2
     WHERE ((t2.SERVICEID = t0.SERVICEID)
     AND (t2.EVENTDATE > t0.EVENTDATE)))
AND (t1.SERVICEID = t0.SERVICEID))
I would expect to see this query generated once for each service object, with a binding for [serviceId = ?] As it is, the query is only called once and all services have the same latest event object reference.
What am I doing wrong? It feels like I am almost there...
James

James
Thanks for the hint - but in your example, where does SERVICE_ID come from? Is this supposed to be a qualified or unqualified database column name
i.e. SERVICES.SERVICEID
or is it a name of the attribute from the class behind the descriptor that owns this mapping? The only place I set the mapping's descriptors class is
descriptor.addMapping(latestEventMapping);
and I am worried that I have not stated that the mapping source class is Service.
At the moment I get the error message
Exception Description: The parameter name [serviceId] in the query's selection criteria does not match any parameter name defined in the query.
Query: ReadObjectQuery(com.surfkitchen.skynet.central.ServiceHistory)
I am confused because I have not defined a query, although I would expect the descriptor's source class (Service) to provide a set of parameters representing the primary key to all of its mappings.
James

ALMOST THERE! NoClassDefFoundError and Visual J++ 6.0

Similar Messages

Maybe you are looking for