ALV Grid Usin Function Modulesshould be Displayed in ALV Grid Function mod

Hi,
I had a requirmentlike SM30 we hav to create initial Screen and wat ever ZXXXX tables we enter it will create Fieldcatalog Dynamically and press dislay it show in display mode.
If we Press Maintain it will Display in Editable Mode.The changed data should be updated into DB.Evrything should be displayed in
ALV Grid Function MOdule..
How to Get value from Screen Field ?
How To Generate Fieldcatalog For that Table dynamically?

Hello,
How To Generate Fieldcatalog For that Table dynamically?
Use the FM 'REUSE_ALV_FIELDCATALOG_MERGE' pass the table name in the import param I_STRUCTURE_NAME & you'll get the fiel cat dynamically!
BR,
Suhas

Similar Messages

Display Multiple ALV layouts on one screen

Hi,
I have created 4 ALV Catalogues named: ALVCAT1, ALVCAT2, ALVCAT3, ALVCAT4
I have also created the corresponding internal tables with data for each catalogue: ALVITAB1, ALVITAB2, ALVITAB3, ALVITAB4
I have so far used the following function to generate each of the catalogues above:
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME     = SY-CPROG
      I_INTERNAL_TABNAME = 'ALVITAB1'
      I_INCLNAME         = SY-CPROG
    CHANGING
      ct_fieldcat        = ALVCAT1[].
And I have used the following function module to display the table as ALV:-
*DISPLAYING REPORT AS ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = SY-CPROG
      I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND'
      IT_FIELDCAT             = ALVCAT1[]
     i_screen_start_column = 10
     i_screen_start_line   = 15
     i_screen_end_column   = 200
     i_screen_end_line     = 20
    TABLES
      t_outtab                = ALVITAB1.
How can I now using the above function modules or similar function modules to DISPLAY multiple ALV layouts on a single SCREEN. Each layout should be treated separately with their own ALV tool bar etc.
In this case i need to display 4 screens but I have scenarios where i need to also display 5.
Would be really grateful for your guidance with source code to achieve this.....
Thnx
Salman
Edited by: Salman Akram on Sep 20, 2010 2:47 PM

Hi
Try this [Link|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=61243570] or the below program
BCALV_TEST_GRID_DRAG_DROP
or else
Try to use splitter container to display multiple ALVs on one screen
here is the demo program RSDEMO_SPLITTER_CONTROL
the below code will help you to call grid using splitter control
     EXPORTING
        container_name = 'CUSTOM'.
    CREATE OBJECT splitter
      EXPORTING
        parent = container
        rows    = 1
        columns = 1
        align   = 15.
    CALL METHOD splitter->set_row_height
      EXPORTING
        id     = 1
        height = 1.
    CALL METHOD splitter->get_container
      EXPORTING
        row       = 1
        column    = 1
      RECEIVING
        container = container_1.
    CREATE OBJECT grid1
      EXPORTING
        i_parent = container_1.
    CALL METHOD grid1->set_table_for_first_display
      EXPORTING
        is_layout       = gss_layout
        is_variant      = lwa_variant
        i_save          = 'A'
      CHANGING
        it_outtab       = gt_report_list
        it_fieldcatalog = gtt_fld_cat.
Regards
Edited by: Anesht on Sep 20, 2010 11:49 PM

Need to be displayed in ALV grid

Dear All,
Below is my Program's code which is working accordingly. But in this code I am generating output as Basic list display. But I want my output to be displayed in ALV only. So from where I will start. Where to add code for Alv in my existing code. Can anybody help me out on the same.
Regards,
Abhay.
REPORT zfi_temp_rfkopr00
 MESSAGE-ID FR
 LINE-SIZE 132
 NO STANDARD PAGE HEADING.
Report Name : Vendor Open Items Ageing Report
Purpose : This report displays the Vendor Open Items based on
different Ageing days (Calculated by taking the Base
Line date and the days mentioned in Payment Terms)
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE sy-lisel, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
 MESSAGE e999 WITH 'Column 1 greater'(004)
 'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
 MESSAGE e999 WITH 'Column 2 greater'(006)
 'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
 MESSAGE e999 WITH 'Column 3 greater'(008)
 'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs AND
b~zfbdt LE p_allgst.
IF sy-subrc <> 0.
 MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
CLEAR: v_date1, v_str, v_str1, v_tage.
WRITE p_allgst TO v_date1.
MOVE p_tage4 TO v_tage.
CONCATENATE '>' v_tage text-025 INTO v_str1.
CONCATENATE
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 INTO v_str SEPARATED BY space.
CALL FUNCTION 'Z_STANDARD_HEADER'
 EXPORTING
 title1 = 'Saudi International Petrochemical Company'(012)
 title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 CENTERED, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
 CLEAR v_date.
 IF int_bsik-zbd3t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd3t.
 ELSE.
 IF int_bsik-zbd2t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd2t.
 ELSE.
 v_date = int_bsik-zfbdt + int_bsik-zbd1t.
 ENDIF.
 ENDIF.
 IF int_bsik-zbd1t = ' '.
 v_date = int_bsik-zfbdt.
 ENDIF.
 IF v_date IN r_date1.
 int_final-total1 = int_final-total1 + int_bsik-dmbtr.
 ELSEIF v_date IN r_date2.
 int_final-total2 = int_final-total2 + int_bsik-dmbtr.
 ELSEIF v_date IN r_date3.
 int_final-total3 = int_final-total3 + int_bsik-dmbtr.
 ELSEIF v_date IN r_date4.
 int_final-total4 = int_final-total4 + int_bsik-dmbtr.
 ELSEIF v_date > r_date4-high.
 int_final-total5 = int_final-total5 + int_bsik-dmbtr.
 ELSEIF v_date < p_allgst.
 int_final-total6 = int_final-total6 + int_bsik-dmbtr.
 ENDIF.
 AT END OF lifnr.
 v_flag = 1.
 ENDAT.
 IF v_flag = 1.
 int_final-lifnr = int_bsik-lifnr.
 int_final-name1 = int_bsik-name1.
 int_final-total = int_final-total1 + int_final-total2 +
 int_final-total3 + int_final-total4 + int_final-total5 +
 int_final-total6.
 APPEND int_final.
 v_gtotal1 = v_gtotal1 + int_final-total1.
 v_gtotal2 = v_gtotal2 + int_final-total2.
 v_gtotal3 = v_gtotal3 + int_final-total3.
 v_gtotal4 = v_gtotal4 + int_final-total4.
 v_gtotal5 = v_gtotal5 + int_final-total5.
 v_gtotal6 = v_gtotal6 + int_final-total6.
 v_gtotal = v_gtotal + int_final-total.
 WRITE: /1 sy-vline,
 2 int_final-lifnr COLOR 4 INTENSIFIED ON,
 13 sy-vline,
 14 int_final-name1 COLOR 4 INTENSIFIED ON,
 49 sy-vline.
 DATA : v_rem.
 v_rem = sy-tabix MOD 2.
 IF v_rem NE 0.
 FORMAT COLOR 2 INTENSIFIED.
 WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
 66 sy-vline,
 67 int_final-total2 CURRENCY int_bsik-waers,
 83 sy-vline,
 84 int_final-total3 CURRENCY int_bsik-waers,
 100 sy-vline,
 101 int_final-total4 CURRENCY int_bsik-waers,
 117 sy-vline,
 118 int_final-total5 CURRENCY int_bsik-waers,
 134 sy-vline,
 135 int_final-total6 CURRENCY int_bsik-waers,
 151 sy-vline,
 152 int_final-total CURRENCY int_bsik-waers,
 168 sy-vline.
 ELSE.
 WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
 66 sy-vline,
 67 int_final-total2 CURRENCY int_bsik-waers,
 83 sy-vline,
 84 int_final-total3 CURRENCY int_bsik-waers,
 100 sy-vline,
 101 int_final-total4 CURRENCY int_bsik-waers,
 117 sy-vline,
 118 int_final-total5 CURRENCY int_bsik-waers,
 134 sy-vline,
 135 int_final-total6 CURRENCY int_bsik-waers,
 151 sy-vline,
 152 int_final-total CURRENCY int_bsik-waers,
 168 sy-vline.
 ENDIF.
 FORMAT COLOR OFF.
 HIDE int_final.
 CLEAR int_final.
 v_flag = 0.
 ENDIF.
 AT LAST.
 WRITE : /1(168) sy-uline.
 FORMAT COLOR 3 INTENSIFIED.
 WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
 49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
 66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
 83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
 100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
 117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
 134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
 151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
 168 sy-vline.
 HIDE : v_gtotal1,
 v_gtotal2,
 v_gtotal3,
 v_gtotal4,
 v_gtotal5,
 v_gtotal6,
 v_gtotal.
 ENDAT.
 FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
 v_rem = v_cnt MOD 2.
 CLEAR v_date.
 IF int_bsik-zbd3t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd3t.
 ELSE.
 IF int_bsik-zbd2t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd2t.
 ELSE.
 v_date = int_bsik-zfbdt + int_bsik-zbd1t.
 ENDIF.
 ENDIF.
 IF int_bsik-zbd1t = ' '.
 v_date = int_bsik-zfbdt.
 ENDIF.
 IF v_rem NE 0.
 FORMAT COLOR 2 INTENSIFIED.
 WRITE :/1 sy-vline, 2 int_bsik-belnr,
 12 sy-vline,13 int_bsik-lifnr,
 23 sy-vline,24 int_bsik-name1,
 59 sy-vline,60 int_bsik-xblnr,
 76 sy-vline,77 int_bsik-zfbdt,
 87 sy-vline.
 WRITE : 104 sy-vline,121 sy-vline,
 138 sy-vline,155 sy-vline,
 172 sy-vline, 189 sy-vline,
 190 int_bsik-dmbtr CURRENCY int_bsik-waers,
 206 sy-vline.
 IF v_date IN r_date1.
 v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
 WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date2.
 v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
 WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date3.
 v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
 WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date4.
 v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
 WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date > r_date4-high.
 v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
 WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date < p_allgst.
 v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
 WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ENDIF.
 FORMAT COLOR OFF.
 ELSE.
 WRITE :/1 sy-vline, 2 int_bsik-belnr,
 12 sy-vline,13 int_bsik-lifnr,
 23 sy-vline,24 int_bsik-name1,
 59 sy-vline,60 int_bsik-xblnr,
 76 sy-vline,77 int_bsik-zfbdt,
 87 sy-vline.
 WRITE : 104 sy-vline,121 sy-vline,
 138 sy-vline,155 sy-vline,
 172 sy-vline,189 sy-vline,
 190 int_bsik-dmbtr CURRENCY int_bsik-waers,
 206 sy-vline.
 IF v_date IN r_date1.
 v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
 WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date2.
 v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
 WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date3.
 v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
 WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date4.
 v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
 WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date > r_date4-high.
 v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
 WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date < p_allgst.
 v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
 WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ENDIF.
 ENDIF.
 FORMAT COLOR OFF.
 v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
CLEAR: v_date1, v_str, v_str1, v_tage.
WRITE p_allgst TO v_date1.
MOVE p_tage4 TO v_tage.
CONCATENATE '>' v_tage text-025 INTO v_str1.
CONCATENATE
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 INTO v_str SEPARATED BY space.
CALL FUNCTION 'Z_STANDARD_HEADER'
 EXPORTING
 title1 = 'Saudi International Petrochemical Company'(012)
 title2 = v_str.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
ENDFORM. " header1

Hi Abhay,
After moving the whole data into final internal table, pass that internal table to function module REUSE_ALV_GRID_DISPLAY.
before that you need to build field catalog and have to build layout with all the required columns.
Go through the below links for your reference.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV? http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV? http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV? http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
http://www.sap-img.com/abap/what-is-alv-programming.htm
http://www.sap-img.com/abap-function.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
http://esnips.com/doc/ad20dca9-6182-4903-8d8f-96a66dc8590c/ALV.pdf
http://www.sap-img.com/abap-function.htm
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Reward points for helpful answers,
Satish

What is the difference between list display and grid display in alv report

Hai genious
i am a new of the abap, i dont know the alv report, i have a small doubt, can u please tell me what is the main difference between list display and grid display in alv report
thanks&regards
chinnu

Hi ,
1. For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
I hope it helps.
Regards,
Mamta
Edited by: Mamta Verma on Nov 27, 2008 6:41 AM

Need to display two ALV GRIDs in a single screen

Hi,
I have a question, i'm using version 4.6. I want to display 2 ALVs in a single screen or by calling.
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 : Display In a single report
ALV1 report (Editable ,Has to be a GRID)
ALV2 report (Non Editable, Has to be a GRID)
(or)
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 :
ALV1 report (Editable ,Has to be a GRID, with a custom button to call ALV2 hiding the ALV1 ie not visible to user)
ALV2 report (Non Editable ,Has to be a GRID, with a custom button to call ALV1 hiding the ALV2 ie not visible to user)
Please help me <REMOVED BY MODERATOR>
Message was edited by:
Alvaro Tejada Galindo

Hi
ABAP List Viewer
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Regards
Anji

In ALV grid report, totals of columns display at end of report

Hi.....!
 In ALV report i want to display grand totals in end of list and also i want to output display ALV report in page by page

Hi,
this the code i am sending it may help you.
DATA : wa_sort TYPE slis_sortinfo_alv.
DATA : it_sort TYPE slis_t_sortinfo_alv. " for sorting
PERFORM sub_total USING '<field based on wich you want sort(say key field>>'.
FORM sub_total USING value(p_sortfld) .
wa_sort-fieldname = p_sortfld.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort
and then is main function module for display grid or list.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = wa_pgm
 i_callback_top_of_page
 ='TOP_OF_PAGE'
 i_grid_title = text-016
 it_fieldcat = it_fieldcat
 it_sort = it_sort
 i_default = 'X'
 i_save = 'A'
 TABLES
 t_outtab = it_final.

Change/Display in ALV Grid

Hello All,
I am using FM 'REUSE_ALV_GRID_DISPLAY'. It is required that when the user presses a button on the screen, that a few fields toggle from display mode to changed mode. I know that setting the input and edit fields to X for the field catalog table will allow a user to change the table but only on the initial display of the grid. Does anyone know how I toggle between the change and display mode of the ALV grid? Thanks for your help in advance.
John

Hello Ashish,
I am setting V_SELFIELD-REFRESH = 'X' in my program. I debugged it and found that the sy-subrc is 1 after it passes the FM REUSE_ALV_LIST_LAYOUT_INFO_GET. Do you have any idea as to why this would be 1 and not 0? This is my code so far:
 CALL FUNCTION 'REUSE_ALV_LIST_LAYOUT_INFO_GET'
 IMPORTING
 ET_FIELDCAT = int_fcat[]
 TABLES
 ET_OUTTAB = itab[]
 EXCEPTIONS
 NO_INFOS = 1
 PROGRAM_ERROR = 2
 OTHERS = 3
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.

Multiple selection in DISPLAY only ALV GRID

Hi,
I would like to make the rows of the ALV Grid Display only at the same time I would like to make multiple selection possible.
Multiple selection is possible by giving EDIT = 'X' at the layout level. But then if we give EDIT = ' ' at the fieldcatalogue level or no_input = 'X' at the layout level it is still in Editable mode. Kindly help me.
Thanks

Hi,
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
 IMPORTING
 et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
 CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
 EXPORTING
 textline1 = 'You must choose a valid line'.
 EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
 READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
 ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
 CALL METHOD go_grid->set_selected_rows
 exporting
 it_index_rows = gi_index_rows.
ENDIF.
Make an Exception field ( = Traffic lights)
There can be defined a column in the grid for display of traffic lights. This field is of type Char 1, and can contain the following values:
1 Red
2 Yellow
3 Green
The name of the traffic light field is supplied inh the gs_layout-excp_fname used by method set_table_for_first_display.
Example
TYPES: BEGIN OF st_sflight.
 INCLUDE STRUCTURE zsflight.
TYPES: traffic_light TYPE c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Set the exception field of the table
 LOOP AT gi_sflight INTO g_wa_sflight.
 IF g_wa_sflight-paymentsum < 100000.
 g_wa_sflight-traffic_light = '1'.
 ELSEIF g_wa_sflight-paymentsum => 100000 AND
 g_wa_sflight-paymentsum < 1000000.
 g_wa_sflight-traffic_light = '2'.
 ELSE.
 g_wa_sflight-traffic_light = '3'.
 ENDIF.
 MODIFY gi_sflight FROM g_wa_sflight.
 ENDLOOP.
Name of the exception field (Traffic light field)
 gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
Grid setup for first display
 CALL METHOD go_grid->set_table_for_first_display
 EXPORTING i_structure_name = 'SFLIGHT'
 is_layout = gs_layout
 CHANGING it_outtab = gi_sflight.
Color a line
The steps for coloring a line i the grid is much the same as making a traffic light.
To color a line the structure of the table must include a Char 4 field for color properties
TYPES: BEGIN OF st_sflight.
 INCLUDE STRUCTURE zsflight.
 Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Loop trough the table to set the color properties of each line. The color properties field is
Char 4 and the characters is set as follows:
Char 1 = C = This is a color property
Char 2 = 6 = Color code (1 - 7)
Char 3 = Intensified on/of = 1 = on
Char 4 = Inverse display = 0 = of
 LOOP AT gi_sflight INTO g_wa_sflight.
 IF g_wa_sflight-paymentsum < 100000.
 g_wa_sflight-line_color = 'C610'.
 ENDIF.
 MODIFY gi_sflight FROM g_wa_sflight.
 ENDLOOP.
Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
 EXPORTING i_structure_name = 'SFLIGHT'
 is_layout = gs_layout
 CHANGING it_outtab = gi_sflight.
Refresh grid display
Use the grid method REFRESH_TABLE_DISPLAY
Example:
CALL METHOD go_grid->refresh_table_display.
ALV Grid Control with column and row selection
Selecting and Deselecting Rows
Use
Depending on where the ALV grid control is used, there are various methods for selecting and deselecting cells and rows:
If no pushbuttons are displayed on the left edge of the list:
You can only select one row at a time.
You can select multiple rows.
If pushbuttons are displayed on the left edge of the list:
You can select several rows or individual cells.
You can select several rows as well as several cells or individual cells.
Procedure
If no pushbuttons are displayed on the left edge of the list, you select a row by clicking an entry in the row.
If pushbuttons are displayed on the left edge of the list, you select a row by clicking the pushbutton on the relevant row.
In this case, you select the relevant cell by selecting the entry in the row.
In both cases:
To select several rows, press the Shift button and choose the cells as described above.
Adjacent rows:
Select a row, choose Shift or Control, and select the desired rows,
or
Choose Shift, and select the first and the last of the desired rows,
or
Select a row, keep the mouse button pressed, and pass over the desired rows.
Rows that are not adjacent:
Select a row, choose Control, and select the desired rows.
All rows:
You can only select all rows at once if pushbuttons are displayed on the left side of your list. To select all rows, choose .
To deselect individual rows, press the Ctrl button and click the relevant row.
Result
The selected cells have an orange background. The position of your cursor is indicated with a yellow background.

Data not getting displayed in ALV grid when run in background

Hello experts!
Could anyone help me out please?
I need to display an ALV grid in the background. My requirements are as follows:
I first display an ALV grid in the foreground based on some input parameters. The user selects a few records for updating it and clicks on the "update" button. On the click of this button another report must be called and here the ALV report is displayed in the background.I am using "reuse_alv_grid_display" to display the grid.
I am using Import/Export to get the selected rows in my called report. When i execute this report in the foreground i get the ALV grid along with the data. But when i execute it in the background, i get only the grid with the fieldnames and not the data when i check in SP01.
Thanks in advance!
Smitha

Hi Smitha,
If you are able to see in SP01 and only see the output layout or "List contains no data" shows clealry that the data is not getting passed in the called program or the data is not being used correctly in the called program.
Cheers
VJ

How can we split the grid display in alv reports.

hi everyone.i am trying to get the display of two reports in a single one using split screens.i had written a report for vendor balance.one for open and one for cleared items.how can i combine these two reports.
the field catalog was same for these two.
can anyone suggest me suitable way to perform.

HI,
You can also try ALV Blocked display.
Pls Check following program
BCALV_TEST_BLOCK_LIST.
FM used are
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = sy-repid.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = it_layout
it_fieldcat = fc
i_tabname = 'IT_VBRK1'
it_events = it_event
tables
t_outtab = it_vbrk1.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = it_layout
it_fieldcat = fc1
i_tabname = 'IT_VBRK2'
it_events = it_event
tables
t_outtab = it_vbrk2.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
form top_of_page1.
format color col_positive.
write: / 'FIRST BLOCK'.
endform.

Is it possible to display list alv and grid alv in the same screen

Hi
There are methods to display more than 1 alv grid in the same screen by using block append grid . In the same manner its available for more than 1 list alv report display by REUSE_ALV_BLOCK_LIST_APPEND.
My question is I want to display 1 alv list and 1 alv grid report in the same output screen .
Please let me know how to do it ? I will definetly appreciate the answers.
Thanks!!

Hi Anindita,
Previously i ad told v cant display two lists together in same screen. But u can use Block ALV for this. Use FM "REUSE_ALV_BLOCK_LIST_APPEND.
In OO u can use Cl_GUI_EAST_SPLITTER_CONTAINER for displayin more than two lists in same screen.
If useful giv points
Regards
Vanitha P

How to make the first row selected before the display of ALV grid

Hello Experts,
I created a ALV grid using custom container in a screen . Now i want do the follwing:
1. i want that, the first line must be selected before the display of ALV.
2. I have selection buttons . But i dont want the multiselect button and the
 standard toolbar in the ALV grid.
Could any one please help me regarding the above?
Thanks & Regards
Sudhansu

can u pls explain in more details with an example?
I am telling u the scenario.
1. i have a screen(Modal dialog Box) containing ALV grid with selection buttons for each row (top part) and a subscreen(second part).
 Now when i click on a selection button, it will display the corresponding values in the subscreen.
 When this screen will display for the first time , then first row of the ALV grid should be selected and the corresponding values should be displayed in the subscreen.
i wrote the following code in the PAI. But when i select a record its not triggering the PAI.
DATA:
 gi_index_rows TYPE lvc_t_row, " Internal table for indexes of selected rows
 g_selected_row LIKE lvc_s_row, " Information about 1 row
 l_lines TYPE i.
CLEAR g_wa_vdmeko.
*get selected row
CALL METHOD g_alv_grid->get_selected_rows
 IMPORTING
 et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
LOOP AT gi_index_rows INTO g_selected_row.
 READ TABLE g_int_vdmeko INDEX g_selected_row-index INTO g_wa_vdmeko.
 SELECT SINGLE *
 FROM vdmepov
 WHERE bukrs = g_wa_vdmeko-bukrs AND
 styp = g_wa_vdmeko-styp AND
 sbez = g_wa_vdmeko-sbez AND
 svym = g_wa_vdmeko-svym AND
 svnr = g_wa_vdmeko-svnr.
ENDLOOP.
I am displayinng the ALV using method "set_alv_for_first_display".
Please help if u have any idea..................
Thanks
Sudhansu

How can i change sequence of structrure when i display in alv grid.

Hi,
I am doing object oriented alv. Now i need to change my sequence of alv grid. How can i change sequence of structrure when i display in alv grid. Send me code if possible....
IF G_CONTAINER IS INITIAL.
 CREATE OBJECT G_CONTAINER
 EXPORTING
 CONTAINER_NAME = 'CONTAINER'.
 CREATE OBJECT ALV_DISP
 EXPORTING
 I_PARENT = G_CONTAINER.
 CALL METHOD ALV_DISP->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 I_STRUCTURE_NAME = 'ZPMS_OUTPUT_V3'
 CHANGING
 IT_OUTTAB = IT_PMT
 IT_FIELDCATALOG = G_FLDCAT
 EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 OTHERS = 4.
 IF SY-SUBRC <> 0.
 ENDIF.
Regards,
Gurprit Bhatia
Message was edited by:
 GURPRIT BHATIA

Hi Gurprit,
when you are maintaining the field catalog you can maintain the order by populating the value as 1,2,... into col_pos filed.
<REMOVED BY MODERATOR>
Satish
Message was edited by:
 Alvaro Tejada Galindo

Alv grid problem quantity zero not displaying

Hi
i am displaying quantity fields kwmeng and bmeng in alv, in code am subtracting the two quantities,
the final subtracted value is displaying in alv when it is >0, when it is equal to zero ,it is displaying blank .
Thanks
Srini

Hi Srinivas,
See this link, it ll help you.
Value Display with Currency/Quantity Unit - ALV Grid Control - SAP Library
Cheers,
pravin

Select row button not getting displayed in alv grid.

Hi ,
As per my requirement I am using tab strip in module pool.
Each tab strip is containing one ALV.
And user can change delete or create one record when the alv is displayed.
The same should be saved in the database and ALV should be refreshed.
When I am displaying the ALV the left most option of the ALV with which I can select the whole row is not coming.
Because of which I am unable to call the method to get the selected row and delete or change accordingly.
Why this button is not coming?
I am using set_table_for_first_display in my program.
Please help.

Hi,
In the method SET_TABLE_FOR_FIRST_DISPLAY, you will have to change the Selection Mode to 'A'. I guess you are not passing any values to the Layout parameters.
Once you do that, you will find what your are looking for.
Data : LA_LAYO type LVC_S_LAYO.
LS_LAYO_SEL_MODE = 'A'.
and pass this to the method's layout parameter.
Cheers,
SKC,

ALV Grid Usin Function Modulesshould be Displayed in ALV Grid Function mod

Similar Messages

Maybe you are looking for