ALV Header Line
can i add 2 header lines in ALV Reporting, if so then how give example.
abhishek suppal
Hi,
Copy the following code and execute, it will work fine.
TYPE-POOLS: slis.
DATA: BEGIN OF i_data OCCURS 0,
qmnum LIKE qmel-qmnum,
qmart LIKE qmel-qmart,
qmtxt LIKE qmel-qmtxt,
ws_row TYPE i,
ws_char(5) TYPE c,
chk,
END OF i_data.
DATA: report_id LIKE sy-repid.
DATA: ws_title TYPE lvc_title VALUE 'An ALV Report'.
DATA: i_layout TYPE slis_layout_alv.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: i_events TYPE slis_t_event.
DATA: i_header TYPE slis_t_listheader.
SELECT qmnum
qmart
qmtxt
INTO TABLE i_data
FROM qmel
WHERE qmnum <= '00030000010'.
LOOP AT i_data.
i_data-ws_row = sy-tabix.
i_data-ws_char = 'AAAAA'.
MODIFY i_data.
ENDLOOP.
report_id = sy-repid.
PERFORM f1000_layout_init CHANGING i_layout.
PERFORM f2000_fieldcat_init CHANGING i_fieldcat.
PERFORM f3000_build_header CHANGING i_header.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = report_id
i_grid_title = ws_title
is_layout = i_layout
it_fieldcat = i_fieldcat
i_save = 'A'
TABLES
t_outtab = i_data
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form F1000_Layout_Init
FORM f1000_layout_init USING i_layout TYPE slis_layout_alv.
CLEAR i_layout.
i_layout-colwidth_optimize = 'X'.
i_layout-edit = 'X'.
ENDFORM. " F1000_Layout_Init
*& Form f2000_fieldcat_init
FORM f2000_fieldcat_init CHANGING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: line_fieldcat TYPE slis_fieldcat_alv.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMNUM'. " The field name and the table
line_fieldcat-tabname = 'I_DATA'. " name are the two minimum req.
line_fieldcat-key = 'X'. " Specifies the column as a key (Blue)
line_fieldcat-seltext_m = 'Notification No.'. " Column Header
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMART'.
line_fieldcat-ref_tabname = 'I_DATA'.
line_fieldcat-hotspot = 'X'. " Shows the field as a hotspot.
line_fieldcat-seltext_m = 'Notif Type'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMTXT'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Description'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_ROW'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Row Number'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_CHAR'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Test Character Field'.
line_fieldcat-datatype = 'CHAR'.
line_fieldcat-outputlen = '15'. " You can specify the width of a
APPEND line_fieldcat TO i_fieldcat. " column.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'CHK'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Checkbox'.
line_fieldcat-checkbox = 'X'. " Display this field as a checkbox
line_fieldcat-edit = 'X'. " This option ensures that you can
" edit the checkbox. Else it will
" be protected.
APPEND line_fieldcat TO i_fieldcat.
ENDFORM. " f2000_fieldcat_init
*& Form f3000_build_header
FORM f3000_build_header USING i_header TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'This is line of type HEADER'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'This is line of type STATUS'.
APPEND gs_line TO i_header.
gs_line-key = 'STATUS 2'.
gs_line-info = 'This is also line of type STATUS'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'This is line of type ACTION'.
APPEND gs_line TO i_header.
ENDFORM. " f3000_build_header
Cheers,
Venkat
Similar Messages
-
How to print header lines at the top of every page with Alv list display?
Dear all,
I need a requirement with printing issue. A program list should be printed with the function reuse_alv_list_display.
The list has several pages and then can be printed but the header lines appear only first page when they printed. The other pages don't have header lines, they continue with the next record of the list remaining from previous page. I use the alv parameters as below:
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_pf_status_set = 'ALV_PF_STATUS'
is_layout = ls_layo
it_fieldcat = lt_fcat
i_default = 'X'
i_save = 'A'
is_variant = ls_variant
it_events = lt_events
TABLES
t_outtab = lt_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
and lt_events as below:
ls_event-name = 'END_OF_LIST'.
ls_event-form = 'ALV_END_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'ALV_END_OF_PAGE'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_LIST'.
ls_event-form = 'ALV_TOP_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'ALV_TOP_OF_PAGE'.
APPEND ls_event TO lt_events.
So, how can I print header lines for every page?
Best Regards,Hello Saba,
Your point might be very close to solution.
Because in the selection screen of the program there are two radio buttons, one of them visits 'REUSE_ALV_COMMENTARY_WRITE' function and the other doesn't. The one which visits has a problem with header liens in every page when printing. But I couldn't find out the solution yet.
reuse_alv_list_display uses 4 event and of course I call subroutine. There are end_of_list, end_of_page, top_of_list and top_of_page. I use in the subroutine for top_of_page:
CALL FUNCTION 'LVC_TRANSFER_TO_SLIS'
EXPORTING
it_fieldcat_lvc = gt_fcat
IMPORTING
et_fieldcat_alv = lt_fcat
EXCEPTIONS
it_data_missing = 1
it_fieldcat_lvc_missing = 2
OTHERS = 3.
CALL FUNCTION 'REUSE_ALV_LIST_WIDTH_GET'
EXPORTING
it_fieldcat = lt_fcat
IMPORTING
e_width = l_width.
WRITE l_reptx TO l_reptx CENTERED.
NEW-LINE.
WRITE: AT (l_width) l_reptx CENTERED.
SUBTRACT 10 FROM l_width.
WRITE: AT l_width sy-pagno RIGHT-JUSTIFIED.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = lt_header
I_LOGO =
I_END_OF_LIST_GRID =
Do you have other suggestions ? -
Download alv report output to excel format with out header line
Hi experts,
i want to download a alv report output into excel formatt with out the header line but it has to download including field description. as this output will fed into another transaction, the downloaded excel file should be with out header line.
fro eg:
Report : Zabc ABAP Development Page : 1
Run Date : 12/14/06 System: UD400
Run Time : 08:45:37
this header details should not be downloaded into the excel file.
could somebody help me please.
thanks
deepuhi jayanti,
thanks for your response.
i have delclared all the field types as character but still it is not downloading and it 's sy-subrc is 4... the code is as below.
*field names
lt_fieldnames-value = 'Material Number'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Plant'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Group'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Description'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'UOM'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Price Unit'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Type'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'X-Plant Status'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Valuation Class'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_avmng.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_avntp.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Latest PO Qty'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Latest PO Cost'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'PO Creation Date'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_fcaqt.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Prev. Yr. Std. Cost'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_stcst.
APPEND lt_fieldnames.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'XLSHEET'
CREATE_PIVOT = 0
DATA_SHEET_NAME = ' '
PIVOT_SHEET_NAME = ' '
PASSWORD = ' '
PASSWORD_OPTION = 0
TABLES
PIVOT_FIELD_TAB =
data_tab = t_output1
fieldnames = lt_fieldnames
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_pivot_fields = 6
download_problem = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE e001 WITH 'Data could not be downloaded'.
ENDIF.
ENDFORM. " z_dwn_xl
thanks
deepu -
OO ALV grid with a header line is this possible?
Howdy!
I have a requirement where I need to produce an ALV grid with the following format:
<b>Text 1 Text 2 Text 3 Text 4
Text 6
Col_1 Col_2 Col_3 Col_4 Col_5 Col_6 Col_7 Col_8 Col_9
Cell conents -
Cell conents -
Cell conents -
Cell conents -
Cell conents -
</b>
Anyone got any idea on how to get the 'TEXT' fields into the ALV grid? These are dynamic texts that would basically display details of data entered in the selection screen.
The ALV title line is limited to 70 characters and I can't think of another way of doing this.
The texts need to appear on the ALV grid becasue the user would like to download them to Excel in addition to the ALV cell contents using the standard ALV functionality.
Any ideas would be appreciated!
Message was edited by: RobertI'm thinking that this may not work because it is not a full screen grid and the grid container does not care about the container on top of it so, it most likely would not print it. Implement this example program, you can see how this would work for you if you were using the FM.
report zrich_0001
no standard page heading.
* Global ALV Data Declarations
type-pools slis.
data: begin of i_alv occurs 0,
matnr type mara-matnr,
end of i_alv.
* Miscellanous Data Declarations
data: fieldcat type slis_t_fieldcat_alv,
events type slis_t_event,
list_top_of_page type slis_t_listheader,
top_of_page type slis_formname value 'TOP_OF_PAGE'.
start-of-selection.
perform initialization.
perform get_data.
perform call_alv.
end-of-selection.
* Form Initialization
form initialization.
clear i_alv. refresh i_alv.
perform eventtab_build using events[].
endform.
* Form Get_Data
form get_data.
select matnr into table i_alv
from mara up to 100 rows.
endform.
* CALL_ALV
form call_alv.
data: variant type disvariant.
data: repid type sy-repid.
repid = sy-repid.
variant-report = sy-repid.
variant-username = sy-uname.
perform build_field_catalog.
perform comment_build using list_top_of_page[].
* Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = fieldcat
i_callback_program = repid
is_variant = variant
it_events = events[]
i_save = 'U'
tables
t_outtab = i_alv.
endform.
* EVENTTAB_BUILD
form eventtab_build using events type slis_t_event.
* Registration of events to happen during list display
data: tmp_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = events.
read table events with key name = slis_ev_top_of_page
into tmp_event.
if sy-subrc = 0.
move top_of_page to tmp_event-form.
append tmp_event to events.
endif.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
clear: fieldcat. refresh: fieldcat.
data: tmp_fc type slis_fieldcat_alv.
tmp_fc-reptext_ddic = 'Material'.
tmp_fc-fieldname = 'MATNR'.
tmp_fc-tabname = 'I_ALV'.
tmp_fc-outputlen = 18.
append tmp_fc to fieldcat.
endform.
* COMMENT_BUILD
form comment_build using list_top_of_page type
slis_t_listheader.
data: tmp_line type slis_listheader.
clear tmp_line.
tmp_line-typ = 'H'.
tmp_line-info = 'Here is a line of text'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key1'.
tmp_line-info = 'Here is a value'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key2'.
tmp_line-info = 'Here is another value'.
append tmp_line to list_top_of_page.
endform.
* TOP_OF_PAGE
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ENJOYSAP_LOGO'
it_list_commentary = list_top_of_page.
endform.
Regards,
Rich Heilman -
Multiple Header Line In HIERSEQ ALV
Hi Experts,
Please guide me how to get miltile Header lines in the HIERSEQ Alv , My requirment it develop a genledger for customers in which the Address of customer should be in 3 or four lines then followed by its balances. Please suggest me ...
Regards,
PrakashHi,
You need to pass the Row number to the filed catlog in order to display multiple header lines.
For example,
wl_fieldcat-row_pos = 1. " This field will be displayed in first row
wl_fieldcat-col_pos = 1.
wl_fieldcat-fieldname = 'VBELN'.
wl_fieldcat-tabname = 'T_VBAK'.
wl_fieldcat-outputlen = 20.
Append wl_fieldcat to t_fieldcat.
wl_fieldcat-row_pos = 2. " This field will be displayed in Second row
wl_fieldcat-col_pos = 1.
wl_fieldcat-fieldname = 'VBELN'.
wl_fieldcat-tabname = 'T_VBAK'.
wl_fieldcat-outputlen = 20.
Append wl_fieldcat to t_fieldcat.
Regards,
Rajneesh -
Displaying blank line in ALV header
How do I display a blank line in ALV header
For eg i want if i want the ALV header to display as follows
Document Datewise Report as of 31/10/2009
<-- BLANK LINE
Run On : 01/12/2009Hi,
Are you using 'REUSE_ALV_COMMENTARY_WRITE' for displaying the header?
If yes, then I think it is not possible. Instead, use the events table to achieve it.
Use the 'REUSE_ALV_EVENTS_GET' FM to get all possible events and then modify
the events internal table to specify the form name to handle top-of-page event.
eg.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
FORM TOP_OF_PAGE.
* Use write statements to display the header data.
ENDFORM.
In write statement use '/' to go to new line. So to insert an empty line you can use something like
write : 'some text' / / 'some text' .
Hope this helps.
Regards,
Bhavesh. -
Two header line in ALV display
Hi ,
I want two header lines in ALV report using reuse_alv_grid_display .
Like
Factory-Sales
Qty Value
10 1000
How to do that please helpHi,
I am giving the example code for 3 header line display. This may help you.
First declare Form,
FORM TOP-OF-PAGE .
FREE TTOP .
FREE HTOP .
CLEAR TTOP .
HTOP-TYP = 'H' .
HTOP-INFO = 'LLYODS STEEL INDUSTRIES LIMITED, WARDHA' .
APPEND HTOP TO TTOP .
CLEAR HTOP .
HTOP-TYP = 'S' .
HTOP-INFO = MAT .
APPEND HTOP TO TTOP .
CLEAR HTOP .
HTOP-TYP = 'S' .
HTOP-INFO = PONO .
APPEND HTOP TO TTOP .
CLEAR HTOP .
HTOP-TYP = 'S' .
HTOP-INFO = item .
APPEND HTOP TO TTOP .
CLEAR HTOP .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = TTOP
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM.
After that declare this form in your Grid or List like below.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = BTAB
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Himanshu -
Hello All,
Does any one have any idea how to create 2 Header lines in an ALv report
as in 1 cummulative header and under that 2nd detailed header.
Please help me out.
Cheers,
Deepthee KasalHi,
It is not possible to have 2 detailed headers in ALV reports.
Regards,
Satish -
Dear gurus,
Need help in displaying ALV list report. the below report is an example of AR aging report. The report output is as below:
DEC
NOV
OCT
SEP
0-30
31-60
61-90
90+
xx
xx
xx
xx
SUBTOTAL
The first 2 lines are the list header. While the 'x' is the amount.
How can i display the above output with 2 header lines? I was thinking of using the REUSE_ALV_FIELDCATALOG_MERGE function. But it will have 2 lines of body row too. In fact, i only one one row in the body. But if i define the header lines manually, i would not able to do the subtotal at the end of the alv list. I need to have the subtotal too.
Thanks in advance!Hi,
For this requirement you need to populate the fld catalog using row_pos and col_pos fields specifing proper position.
See this code snippet ..... this is only possible for ALV list.
TYPE-POOLS: slis.
DATA: ld_fieldcat TYPE slis_fieldcat_alv.
DATA: t_alv_fieldcat TYPE STANDARD TABLE OF slis_fieldcat_alv.
DATA : it_fld TYPE slis_t_fieldcat_alv,
wa_fld TYPE slis_fieldcat_alv.
data: BEGIN OF itab OCCURS 0,
carrid like sflight-carrid,
connid like sflight-connid,
planetype like sflight-planetype,
seatsmax like sflight-seatsmax,
END OF itab.
START-OF-SELECTION.
SELECT carrid connid planetype seatsmax
FROM sflight
INTO TABLE itab.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '1'.
ld_fieldcat-col_pos = '1'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'CARRID'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '1'.
ld_fieldcat-col_pos = '2'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'CONNID'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '2'.
ld_fieldcat-col_pos = '1'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'PLANETYPE'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos = '2'.
ld_fieldcat-col_pos = '2'.
ld_fieldcat-tabname = 'ITAB'.
ld_fieldcat-fieldname = 'SEATSMAX'.
ld_fieldcat-ref_tabname = 'SFLIGHT'.
ld_fieldcat-outputlen = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = t_alv_fieldcat[]
TABLES
t_outtab = ITAB. "internal table
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Amitava -
How to get multiple header lines dynamically and also data hierarchically using ALV
Hi experts,
My requirement is shown below.. I neet to compare prices of service RFQs. So i design as below..
I want to get RFQ number ,Vendor code and vendor name in ALV header and also other headings which static. I think dynamic table is the best way to load RFQ numbers to header.. But problem is i'm unable to load two lines dynamically using ALV.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
i_style_table = 'X'
it_fieldcatalog = gt_dyn_fcat
IMPORTING
ep_table = gt_dyn_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
I use this function and pass RFQ no and vendor code in two rows but it output gt_dyn_table in same row.. How to print them as given image???
Then in data I want to get service items and according to the external service number divide them to groups and get sub totals and also finally total of all sub categories to compare each RFQs price to compare.. There i think ALV hierarch can use. but not sure I can use with dynamic table(in header use it).
What is thee best way to get the output in my image..??
Thanks..
PaviHi experts,
My requirement is shown below.. I neet to compare prices of service RFQs. So i design as below..
I want to get RFQ number ,Vendor code and vendor name in ALV header and also other headings which static. I think dynamic table is the best way to load RFQ numbers to header.. But problem is i'm unable to load two lines dynamically using ALV.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
i_style_table = 'X'
it_fieldcatalog = gt_dyn_fcat
IMPORTING
ep_table = gt_dyn_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
I use this function and pass RFQ no and vendor code in two rows but it output gt_dyn_table in same row.. How to print them as given image???
Then in data I want to get service items and according to the external service number divide them to groups and get sub totals and also finally total of all sub categories to compare each RFQs price to compare.. There i think ALV hierarch can use. but not sure I can use with dynamic table(in header use it).
What is thee best way to get the output in my image..??
Thanks..
Pavi -
Alv grid : is it possible to create 2 header lines ?
alv grid : is it possible to create 2 header lines ?
for example :
open year close year
from 2006 until 2008
data
data
data
data
i know that i can do so in alv list , but is it possible in alv
grid ( with screen ) ?No, this is not supported by the ALV Grid control.
Regards,
Rich Heilman -
Alv - how to create a broader header line?
I'm using the 'TOP_OF_PAGE' parameter within 'AVL_GRID_DISPLAY' FM in connection with 'REUSE_ALV_COMMENTARY_WRITE' to create a Header Line for the List-display.
My Problem is, that I really need to get a broader header with approx. 120 characters but the only structure, 'REUSE_ALV_COMMENTARY_WRITE' seems to allow is 'slis_listheader' which is only three fields broad with 80 characters.
I need a line with 6 fields and 120 to 150 characters - how can i possibly submit that to the function module, or somehow different to 'TOP_OF_PAGE'...?
Thanks, ClemensClemens
I think you will have to format the header yourself.
The problem is that you need to have a pointer to the document (cl_dd_document class) so you can modify it as you want. The only way I found is to use I_CALLBACK_HTML_TOP_OF_PAGE parameter when you call REUSE_ALV_GRID_DISPLAY.
Unortunately, the form specified in I_CALLBACK_TOP_OF_PAGE parameter for REUSE_ALV_GRID_DISPLAY FM is not being called with any parameters. Therefore can't be used to create your heading.
Now, you need to call your FM like this:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_HTML_TOP_OF_PAGE = 'TOP_OF_PAGE1'
...other parameters....
then you will need to create that FORM:
FORM TOP_OF_PAGE1 USING p_doc type ref to cl_dd_document.
DATA: mytoptext(255) TYPE C.
CONCATENATE 'This is my very long text. Probably about 140 chars long'
'or more just to check if it all appears as is. Hopefully with a bit'
'of luck we might have some success here.'
into mytoptext separated by space.
CALL METHOD p_doc->new_line.
CALL METHOD p_doc->add_text
EXPORTING text = mytoptext.
ENDFORM.
I advise that you have a look on the original SAP FM (REUSE_ALV_GRID_COMMENTARY_SET), which is used to format your commentary (through memorised parameter DYNDOS_FOR_ALV) and based on that you can make your heading.
If you can't use I_CALLBACK_HTML_TOP_OF_PAGE parameter then probably defining your own grid is a solution (a bit longer to implement, though).
Hope this helps.
Wojtek -
Space in Top of page on alv header
Hi Experts,
I do have a query on ALV , Can you please help me in solving my problem.
Here goes my query...
I have to develop a ALV where on the top of page i have to display two fields as shown in below which was highlighted in the screen
http://img410.imageshack.us/my.php?image=op2sn9.jpg
But i'm getting output as shown below screen
http://img410.imageshack.us/my.php?image=op1ut4.jpg
I have tried with space and all other alternatives but i'm unable to get the desired output.
Can i have any sample code for the same
Regards
NandaHi,
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
* up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
* Form TOP-OF-PAGE *
* ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
* Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
* Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
* Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected:' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
* i_logo = 'Z_LOGO'.
endform.
* FORM USER_COMMAND *
* --> R_UCOMM *
* --> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
WHEN '&IC1'.
* Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
* Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
* Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
* Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
* Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
* Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
Try with this sample
Regards
Krishna -
Hi Friends,
In ALV GRID i need to display the output header like below.
SHIP
SOLD
|----
NUM
NAME
NUM
NAME
It's not dots and pipes. But like the box with above design.
Can any one please give me your valuable inputs regarding this.
I want to use it in ALV GRID . i.e: By using ALV FM or OOPS also.
Thanks
Srinivas.Hi
REPORT znnr_nnr LINE-SIZE 125.
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
endform. -
Hi friends,
I want the heading of an ALV report in the format given as below ..... Is that possible ???
In the 1st line :-
123 ( Left corner ) ..... ABC (Center).... date (right corner)
In the second line also :- something like the first line .....
Is that possible ???
If yes ... How can i do this ???
Expecting your answers
thanks in advance
Cheers
R.Kriparefer the links:
http://www.sap-img.com/abap/test-alv-display-with-header-footer.htm
or
http://www.sap-img.com/abap/sample-alv-heading-in-alv.htm
or
ALV LIST Header
how to display header in alv list
The last two would address your question more precisely.
Regards,
Ravi
Maybe you are looking for
-
Bw report to show all error message from an infopackage
Dears Experts, I am looking for a way to analyze within a BW reports (a specific one or already existing in a BI content) all errors messages generated by an infopackage and stored within the status field of a PSA. Does someone have any feedbacks or
-
Scheduling agreement to Delivery Document
Dear All Gurus, I am facing an issue, please advise it is the standard system functionality, if yes tell me the work around. I have a schedulin gagreement with two schedule lines for say 23.03.2010 Qty 5, and 24.03.2010 Qty 5. As per my business scen
-
Webservice to Proxy scenario..
Hi, My scenario is EP -- XI -- Proxy scenario in which i have an wsdl at the EP side and what else configuration to be done for creating the proxy at the target side.. Do we need to create the inbound proxy w.r.t to the interface and request you to p
-
Referencing Loader after created in loop
I am creating a loop which loadsimages to newly created loaders. After each loader completes, I'd like to pass it through another function Here's my loop of loaders where loader_names is an array of my loader names and overlay_files is an array of
-
Hi All, I am currently working on ODI tutorials . By mistake I have deleted the default FILE_GENERIC file data server in the Physical archicture Of the topology nav studio. how can I add back this default server for FILEs? I have ODI11g on my laptop.