Always "no service"

Hi guys, since I've updated my iphone 4 to ios 5 i found problem with the cellular network.
The problem is this: when there is no cellular signal my iphone does not search anything cellular signal,
and the iphone show always the message "no service".
Did you had the same problem or is a singular case?
Thanks a lot for your response.
M.

I've solved disabling in lacalization > system service > Search the cellular network (disable)
Bye

Similar Messages

  • What do I do if my phone is ALWAYS "No Service" and restart, reboot, airplane mode trick doesn't work?

    My phone is always "No Service" even if I'm somewhere I used to ALWAYS have signal. I reported it to my carrier and they said that maybe it's because of the walls of our house that the signal can't get through but when I go to school which is far from our house, my signal is still "No Service" all throughout my trip to school. I kept on restarting my phone and I also did the airplane mode trick a lot of times already and it still doesn't work. So since this happened after I updated my OS, I thought of posting it here. My phone is iPhone 5s. I hope someone can help me fix this problem because phone signal is super important to me.

    Hey WonderAlyy,
    I would continue your troubleshooting with the article below. I would start at step 3 because you have already done the first two. Make sure to back up because you may need to restore your iPhone to get it to work. 
    If you see No Service in the status bar of your iPhone or iPad
    http://support.apple.com/en-us/TS4429
    Take it easy,
    -Norm G.  

  • HT201442 why my iphone signal always no service and searching ?

    help me please
    my phone can't get signal cellular data network , always no service or searching
    i don't know what's wrong with my phone
    have solution for this problem?

    Hello haewon91,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Have a nice day,
    Mario

  • Iphone 4s always no service

    iphone 4s always no service when i activate 3G!
    i tried to fix by..
    - restore
    - reboot
    - change sim card
    - replace the sim
    but always be the same NO SERVICE
    //Thailand //DTAC carrier
    How can i do ? ?

    Thats an short circuit. Try compress a piece of paper to here. Sorry my English isn't good.
    compress the sim card

  • My iphone 3gs is always no service or searching

    I don't know why my phone is searching or no service??

    So if you are experiencing a no service. there are a few things you can try.
    Power cycle- power off and back on - test.
    Hard reset -hold home and power button until apple logo appears- release - wait until phone restarts -check
    Reseat the sim card - test.
    Reset network settings-  Settings>general>reset >reset network settings - wait for reboot -test.
    Reset all settings>settings>General>reset>reset all settings.
    Restore the phone following- http://support.apple.com/kb/HT1414

  • My iphone4 always "no service"

    Only one way to resolve it was to restart.How to resolve without restart?I think its a hardware problem.

    You can also try doing a few of these things...
    If its a GSM phone (AT&T) try re-seating the SIM card.  Remove it, wait a minute then place it back.
    Turn on Airplane mode for a minute then turn off.
    Try going to settings>general>reset>reset network settings

  • No longer have service at home....I've lived here for 3 years and never had a problem until now.

    I have been having issues for the last couple of months now with getting service on my cell phone at my house. Meaning, my phone literally says, "NO SERVICE" where I've always had service bars. I can't even send or receive a text message at home. Never, have I experienced these issues before. I've lived in this house for 3 years and have always been able to talk on my cell phone and send and receive text messages, until now. At first I chalked the issues up to the storms we had been having. Assuming a Verizon tower had possibly been hit. After several more weeks passed with the issue being unresolved, I went into my Verizon store and explained the issues I have been having. The rep I was working with suggested that I back up my phone and do a system restart on my iphone to see if that would fix the problem. I followed his instructions and the issue was still unresolved. I then went back into my Verizon store and explained the issue to the same representative I worked with the first time. He said it sounded like it was more of a software issue than a Verizon issue. Since my contract was up and I was good to get a new phone I decided to upgrade to the iPhone 5c (therefore I lost my unlimited data which irks me). When I got home I was shocked to see that I was STILL having the same issues. No Service. Can't text. Can't call. At this point I'm ready to lose my mind. Why am I paying for a service that I am not getting? We left on our family vacation this same day, so when we FINALLY reached a point down the road where I could receive service, I called my Verizon store to express my UNDERSTANDABLE frustrations. They were extremely helpful and have been since day 1. I ended up talking to a different representative than the one who had been helping me. She asked me to explain my situation and the issues I have been having since she hadn't been helping me she wasn't aware of what was going on. Once I explained my situation to her, she asked me where I lived at. Once I told her where I lived she IMMEDIATELY knew what my issue was. She told me that Verizon QUIT paying to use the Nex-tec tower that is by my house. She told me I'm not the first person that lives in my area to come in to their store with these SAME ISSUES. She told me that I needed to contact Verizon and complain and that hopefully if all of us kept complaining, Verizon would resolve the issue. I am WRITING you a complaint because I cannot CALL you off of my cell phone unless I drive SEVERAL miles down the road to a point where I can get service. I live on a busy highway that intersects with another busy highway a few miles down the road in North Central Kansas. I also live 3 miles from a STATE PARK with a VERY BUSY LAKE that doesn't have ANY SERVICE. I have talked to several friends, family members, and neighbors in my area and surrounding towns that are having the same issue as me and were told the same thing. Lovewell State Park is very popular and MANY people spend their weekends there. We have always had service there, until now, as well. Verizon customers that attend Lovewell State Park and that live in the surrounding towns cannot even call 911 off of their cell phone if their is an accident because we have NO SERVICE ANYMORE. I've been with Verizon since they ought out Altell. I have never had any issues with Verizon until now. Please take care of your customers. I trust that you care that you took service AWAY from customers who having been paying you for your service for several years and that you will resolve the issue quickly. We want our service BACK. We want to get service that we PAY FOR. If you cannot resolve the issues that I (and so many others) are having, I will be forced to switch to a new provider. As of right now, Verizon is doing me no service. Please change that. We live in an area where there are many accidents due to the types of jobs and winter weather we have in this area. It is necessary that we are able to make phone calls. I know that I am not the first nor will I be the last in our area to complain about this issue. Please fix these issues. Again, this information came straight from our Verizon store. They are just as upset as we are about the situation. The store doesn't want to lose us as customers and we would feel bad doing that to them when they have been such great people to work with. If the issues are not resolved we will be left with no other choice.

        @farmwife25
    After reading your post, I can certainly understand your concerns with this situation.  I would love to assist you finding a resolution for your service issues in your home area.  First, I'll need to ask you a few questions to help me in resolving.
    In what zip code do you experience this problem?  You mentioned service problems at your home.  Do you get a signal when you're outside at this location?  Have you spoken with our Technical Support Team regarding this issue in the past?  And if so, was a resolution ticket filed for this issue on your behalf?  Please let me know so that I can further assist.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • SocketTimeoutException when calling a web service from a WD application

    I'm trying to call a method of a web service from my WD application. The execution of the method longs more than 60 sec, so I'm always getting:
    Service call exception; nested exception is: java.net.SocketTimeoutException: Read timed out
    I've got this post, which tells to change the property "socketTimeout" of the client.
    Read Timed Out Error
    But I don't know what is the client in my WD application, does this refer to the logical port ?
    I've tried inserting this into wdInit:
    com.hesa.hesanet3.h3wsmodel.proxies.Hesanet3Impl service = com.hesa.hesanet3.h3wsmodel.H3WSModel.getServiceImpl();
    logicalPort =(com.hesa.hesanet3.h3wsmodel.proxies.Hesanet3ViDocument) service.getLogicalPort("Config1Port_Document", com.hesa.hesanet3.h3wsmodel.proxies.Hesanet3ViDocument.class);
    logicalPort._setProperty("socketTimeout", "30000");
    But it doesn't work.
    I've tried getting the logical port from the model object corresponding to the method of the webservice unsuccesfully.
    I've tried with Visual Administrator -> instance -> Web Service Container -> Settings -> WS Clients Socket Timeout, increasing to 120 secs. No result, still stop at 60s.
    I've tried with Visual Admin -> global configuration -> Http provider -> KeepAliveTimeout, increasing to 120 secs, and still stop at 60s.
    I can't change model object code, but I've tried to debug it and setting the property in stubForLogicalPort and in _getGlobalFeatureConfig(), without change.
    I'm using a HTTP Destination, does this have something to do?
    I'm getting insane with this and I'm in urgent need of help.
    How can I change the time the WD waits for the WebService to answer ?
    Thanks in advance.

    Find solution. Check this thread:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2bweb%2bservice
    The com.sap.tc.webdynpro.model.webservice.api.IWDWSInvocationModifier interface can be implemented by an application using the Adaptive Web Service model in order to modify the web service invocation object just before it's execution. Invocation modifiers need to be registered with the executable model class for which invocation is to be modified:
    Request_NumberToWords requestMO = new Request_NumberToWords(model);
    requestMO.wdSetInvocationModifier(
      new IWDWSInvocationModifier() {
        public void doModifyInvocation(Object port) {
          HTTPControlInterface httpItf = HTTPControlFactory.getInterface(port);
          //timeout for this WS invocation is 120 sec; don't use global config. setting of WS-Runtime
          httpItf.setSocketTimeout(120000);
        public void doModifyAfterInvocation() {}
    Best regards.

  • Driver (de) installation issue / services.

    Hello all,
    I'm currently facing a severe problem with my soundcard and hope that this forum can help me to solve this issue...
    My PC is a Dell XPS 600 system (dated March 2006), Intel 2C 3.00 GHz, 2 GB RAM, 2x250 GB Raid 0, nVidia GeForce 6800, Windows XP SP2 installed. I have several peripherals via USB connected to the system, two external HDDs, a Wacom graphics tablet, a DVB-T (TV) stick, a Logitech webcam. The soundcard is a Creative Soundblaster X-Fi Xtreme Music (PCI).
    A couple of days ago, I have exchanged the 2x GB RAM with two new 2GB modules to a total of 4GB RAM. After the first reboot, the BIOS detected the change correctly, and everything worked fine initially. (Despite the fact that Windows showed only 2GB in Control Panel > System, but a MS diagnostics program reported 4096 MB nevertheless. In the boot.ini file, I added the /3GB switch which is recommended to set for working with Adobe Photoshop CS3, which I do predominantly.)
    I also did a memory HW check with a little tool with a 00% positi've result.
    After some reboots and hours/days later, a strange phenomenon occured.
    Firstly I noted that the loudspeaker icon in the taskbar tray has disappeared. I checked in Device Manager, and the sound device was marked with the well-known yellow exclamation mark. Before changing anything, I did a reboot, and everything was fine again, even after some subsequent reboots. Then, only one time, the system seemed to have forgotten its display settings (changed to 640x480 instead of 600x200) which I corrected manually - everything fine again.
    Then, reboots later, again no sound and the exclamation mark in the Device Manager. I wondered if I should check for the latest driver version, got one from the Dell support site (since the SB X-Fi seems to be a special Dell version), and tried to install it - and here is where the pain began.
    I extracted all files from the driver .exe and started the setup program, which at one point froze. Manually closed it, checked Device Manager - still the exclamation mark. From within the Device Manager, tried to install the drivers, same result: Device Manager stopped frozen. I then tried the various steps: deactivated the audio device, deinstalled drivers, reinstalled drivers (different releases), rebooted, all steps again in all combinations - to no avail.
    I changed the RAM back to the original state, the same deinstall/reinstall game as above, same result: Audio device appears in Device Manager as deactivated (red cross), I'm activating it, the 'add new hardware' routine recognizes the soundcard, asks for drivers, I point to the directory with the files in question, and at some point the process stops, Device Manager frozen.
    When I manually close and start it again, the red cross has disappeared, but now the yellow exclamation mark is there. After a reboot, the sound device is shown as deactivated again (red cross).
    With Sysinternals' Process Explorer, I started to monitor the installation procedure. What I found out is that at some point regsvr32.exe is started a couple of times, some names of driver files (as a sub process of regsvr32.exe) appear and disappear again quickly, then everything comes to a hold, AND: services.exe starts to run constantly at a CPU usage of 50 per cent (as the final status). This state of system does not change for hours. I've been checking the threads of services.exe in Process Explorer, but the only thing I can see is some kernel thread (with some addresses given) which is consuming the CPU's computing power, and I can kill the thread w/out any problem to reduce the CPU usage, though it doesn't help to get me any further, ie. the system does not finish with the driver installation.
    What else did I try:
    - disconnected and deinstalled the Logitech Webcam, because I remembered to have read that this device/its drivers are sometimes causing troubles
    - deinstalling any other audio drivers (codecs etc.) in Device Manager
    - used some registry clean-up tools as well as the Driver Cleaner (www.drivercleaner.net)
    - did some virus scans and checked the system with hijackthis additionally
    - disabled my virus scanner during installation trials (Kaspersky 6.0)
    - started in safe mode and played the deinstall/install game in Device Manager a couple of times - always the services.exe issue
    - tried to restore some old system check points to no avail ('no changes have been made to the system')
    What I did not so far is:
    - to plug out the soundcard and try another PCI slot (I cannot imagine that the hardware is suddenly defecti've)
    - manually clean all single driver files from the system
    - up to now I'm trying to avoid a reformat/reinstall of the OS which is the 'ultima ratio' from my point of view. (Would I have any guarantee that the system will work afterwards?)
    Somehow I believe that it's a Windows OS issue, especially in respect to services.exe.
    Do you have any clues or advice how to proceed?
    Thank you very much for reading and your support in advance.
    Cheers, Max
    (Apologies for my English)Message Edited by Max225 on -3-200704:32 AM

    It is generally a good idea to uninstall the apps first before uninstalling the driver for the hardware so, in this case you should go for the Console Launcher and then the Creative Driver.
    You might also need some utility software like driversweeper and ccleaner to clear up any left overs and the registry itself.

  • ISG does not send Access-Request to download service definition

    Hi guys, 
    I got these configs on my ISG and when I see the packets between AAA and ISG router, there's no access-request for downloading the service definition! 
    policy-map type control PPPoE_MAIN_POLICY
     class type control always event session-start
      10 authenticate aaa list PPPoE_AUTHE 
      15 authorize aaa list PPPoE_AUTHO password cisco identifier source-ip-address
      20 service local
     class type control always event service-start
      5 collect identifier source-ip-address
      10 service permit
      20 service-policy type service identifier service-name
      30 log-session-state 
     class type control always event account-logon
     service-policy type control PPPoE_MAIN_POLICY
    And here's the picture of Access-Accept with bunch of specified not-cached services 
    Any idea I appreciate it in advance. 

    Hi,
    Could you share your full config? It would be good to check your AAA config since that will influence how service profiles are downloaded.
    Also, could you briefly explain the goal of your config? Do you simply want to apply services "SRV_INTERNET_PRIMARY" and "SR_INTERNET_128K_5G" via autosevice?
    Regards

  • No service for hours on iphone5 - can't contact Verizon.

    For hours, I've had no service. I'm at home where I always have service. I can't even call *611. No one is available for live chat on Verizon website. I need help!

        Hi Tksomerville
    I don't want you to be without service! Let's look into this together! What zip are you in? Try this and retest: http://vz.to/1oUnxMy
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • HT4623 i update iPhone 3gs when it finished.. why it has a problem can't search the service

    i update version iphone 3gs when it finished why it has a problem ?? It always No service how should i do ??

    Well we need to know what your problem is if you want someone to offer a solution for you

  • Pallet Flags for Full Service

    I am trying to create pallet flags for a non-palletized mailing. I have used the presort scheme automation letters. I am unable to create pallet flags in the file prep software, which says there are no mother pallets and thus no pallet flags. I need to have pallet flags to go full service.

    In addition to what Elector has stated, nowhere does Verizon claim service in all areas. Never has. It is up to you to determine if Verizon's service will provide you the service you need in the areas you require it. If not, you should go with another provider. No provider has the best service in all areas and one persons needs don't necessarily coincide with anyone else's needs.
    If you THINK you should be getting service at ALL times and in ALL locations, you should think again what cellular providers are selling. NO provider is selling that service. Simply because you THINK you are paying for an always available service in ALL locations does not mean that IS what you are paying for. IF that is what you want, you need to find another technology because cellular technology cannot do that, at least not at the current time.
    In Verizon's coverage maps, it specifically states:
    These Coverage Locator maps depict predicted and approximate wireless coverage. The coverage areas shown do not guarantee service availability, and may include locations with limited or no coverage. Even within a coverage area, there are many factors, including customer’s equipment, terrain, proximity to or inside buildings, foliage, and weather that may impact service. Some of the Coverage Areas include networks run by other carriers, the coverage depicted is based on their information and public sources, and we cannot ensure its accuracy.
    Nothing in that statement guarantees service in any given location, in fact it points out that locations even in "full coverage" areas may not have service. If that is the case for you and you require service in that area, you should reconsider if Verizon is the provider for you.

  • Service Organization determination

    I am using CRM 3.1 for Case Management. I have created two Service Organizations under the root organization. Under each Service Organization there are Org Units which are also Service Teams. When I automatically determine Organizational unit, I am always getting the same Service Organization (which is always the Service Org with the lowest BP number). Only Service Organizations and Org Units are permitted for determination. Any suggesion are highly appreciated.
    Thanks
    Ravi
    Message was edited by: Ravi Chundi
    Message was edited by: Ravi Chundi

    header level
    spro-> crm->MD.,->org mang.,->org data determination->change rules and profiles ->assign org data profile to transaction type .
    add ur profile under org data prifle for ur transaction profile .
    item level
    spro-> crm->MD.,->org mang.,->org data determination->change rules and profiles ->assign org data profile to item  .

  • IMessage my phone # even though I don't have service?

    If I don't have cellular service but I do have wifi, will I receive iMessages through my phone number? My friends don't have my email, only my phone number, and I don't always have service, but I'll usually have wifi, so can they iMessage my phone number and I'll still receive it or do I need to give them my email address to imessage(Apple ID)?

    Thanks! I just got my iPhone and I never have service at my school so I just wanted to make sure I didn't have to send out my email address to all my contacts.

Maybe you are looking for