AlwaysOn Failure : exception 41005

While rebooting the secondary side of the failover cluster, the primary availability group hung with the database "resolving".
I found these messages in the SQL server log on the Primary AG. Any idea what error 41005 is?
Source  spid9s
Message
Failed to update Replica status within the local Windows Server Failover Clustering (WSFC) due to exception 41005.
Source  spid52
Message
The state of the local availability replica in availability group 'MSDGRLE_AG' has changed from 'PRIMARY_NORMAL' to 'RESOLVING_NORMAL'. The replica state changed because of either a startup, a failover, a communication issue, or a cluster error. For more information,
see the availability group dashboard, SQL Server error log, Windows Server Failover Cluster management console or Windows Server Failover Cluster log.

Joe,
I found these messages in the SQL server log on the Primary AG. Any idea what error 41005 is?
I'm assuming it's error code 41005 from SQL Server: Failed to obtain the Windows Server Failover Clustering (WSFC) resource handle for cluster resource with name or ID '%s' (Error code %d).  The WSFC service may not be running or may not be accessible
in its current state, or the specified cluster resource name or ID is invalid.  For information about this error code, see "System Error Codes" in the Windows Development documentation.
The Cluster service is shutting down because quorum was lost.
Seems like you found the culprit.
The state of the local availability replica in availability group 'MSDGRLE_AG' has changed from 'PRIMARY_NORMAL' to 'RESOLVING_NORMAL'. The replica state changed because of either a startup, a failover, a communication issue, or a cluster error.
For more information, see the availability group dashboard, SQL Server error log, Windows Server Failover Cluster management console or Windows Server Failover Cluster log.
Which is exactly what is should do when the cluster shuts itself down.
Sean Gallardy | Blog | Microsoft Certified Master

Similar Messages

  • BAPI_DOCUMENT_CREATE2 throws communication failure exception

    Hello to all,
    I want to upload a file in WebDynpro ABAP by placing a service call to BAPI_DOCUMENT_CREATE2.
    But i am getting "communication failure" exception. Request your help on this issue.
    <b>(RFC Exception COMMUNICATION_FAILURE with Message RFC destination Create document does not exist. Occurred)</b>
    Code for this service call is as follows :-
    METHOD EXECUTE2_BAPI_DOCUMENT_CREATE2 .
    DATA: ls_doc    typE bapi_doc_draw2,
          ls_return typE bapiret2.
        key fields of the document
    DATA: lf_doctype    typE bapi_doc_draw2-documenttype,
          lf_docnumber  typE bapi_doc_draw2-documentnumber,
          lf_docpart    typE bapi_doc_draw2-documenttype,
          lf_docversion typE bapi_doc_draw2-documenttype.
    **.... Originals that are checked in simultaneously
    DATA: "lt_files typE bapi_doc_files2 OCCURS 0 WITH HEADER LINE,
          lt_files type standard table of bapi_doc_files2,
          wa_lt_files like line of lt_files,
    **.... Short texts
          lt_drat  typE standard table of bapi_doc_drat,
          wa_lt_drat like line of lt_drat,
    **.... Object links
         "lt_drad  typE bapi_doc_drad OCCURS 0 WITH HEADER LINE.
         lt_drad  typE standard table of bapi_doc_drad,
         wa_lt_drad like line of lt_drad.
    Allocate document data
    ls_doc-documenttype    = 'DRW'.
    ls_doc-documentnumber  = '4711'.
    ls_doc-documentversion = '00'.
    ls_doc-documentpart    = '000'.
    ls_doc-statusextern   = 'AF'.
    ls_doc-laboratory     = '001'.
    Check in original 1 simultaneously in the SAP Database
    REFRESH lt_files.
    CLEAR lt_files.
    wa_lt_files-storagecategory = 'DMS_C1_ST'.
    wa_lt_files-docfile      = 'c:\original_acy.txt'.
    wa_lt_files-wsapplication = 'TXT'.
    APPEND wa_lt_files to lt_files.
    declarations for context navigation
      DATA lo_element TYPE REF TO if_wd_context_element.
      DATA lt_elements TYPE wdr_context_element_set.
    declarations for parameters
    get all involved child nodes
    get input from context
    the invocation - errors are always fatal !!!
      DATA lv_rfc_error   TYPE c LENGTH 120.
      DATA lv_rfc_message TYPE string.
      CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
        DESTINATION  'Create document'
        EXPORTING
           documentdata =                    ls_doc
    "      hostname =                        wd_this->hostname
    "      docbomchangenumber =              wd_this->docbomchangenumber
    "      docbomvalidfrom =                 wd_this->docbomvalidfrom
    "      docbomrevisionlevel =             wd_this->docbomrevisionlevel
    "      cad_mode =                        wd_this->cad_mode
    "      pf_ftp_dest =                     wd_this->pf_ftp_dest
          pf_http_dest =                    'SAPHTTPA'
       IMPORTING
          documenttype =                    lf_doctype
          documentnumber =                  lf_docnumber
          documentpart =                    lf_docpart
          documentversion =                 lf_docversion
          return =                          ls_return
       TABLES
    "      characteristicvalues =
    "      classallocations =
          documentdescriptions = lt_drat
          objectlinks = lt_drad
    "      documentstructure =
          documentfiles = lt_files
    "      longtexts =
    "      components =
        EXCEPTIONS
          system_failure =                    1   MESSAGE    lv_rfc_error
          communication_failure =             2   MESSAGE    lv_rfc_error.
    error handling
      CASE sy-subrc.
        WHEN  1.
          lv_rfc_message = lv_rfc_error.
          RAISE EXCEPTION TYPE cx_wd_no_handler
            EXPORTING
              textid        = cx_wd_no_handler=>kind_rfc
              old_exception = `SYSTEM_FAILURE`
              rfc_message   = lv_rfc_message.
        WHEN  2.
          lv_rfc_message = lv_rfc_error.
          RAISE EXCEPTION TYPE cx_wd_no_handler
            EXPORTING
              textid        = cx_wd_no_handler=>kind_rfc
              old_exception = `COMMUNICATION_FAILURE`
              rfc_message   = lv_rfc_message.
      ENDCASE.
    store output to context
    ENDMETHOD.

    Hi Abhishek,
    This link may be helpful for you
    Re: How to upload file from Web Dynpro into R/3 (BAPI_DOCUMENT_CREATE2)
    Regards
    Fahad Hamsa

  • "'Catastrophic failure (Exception from HResult:0x8000FFF(E_UNEXPECTED))'" when updating a List item

    Hi,
    I am receiving the below error when I update a List item.
    'Catastrophic failure (Exception from HResult:0x8000FFF(E_UNEXPECTED))'
    I have enabled the Verbose logging, and below are the details of the error that I have taken from Log Files.
    Application error when access /sites/exg/Lists/Applics/EditForm.aspx, Error=Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))   at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish)     at Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish)
    Kindly advise the resolution to avoid this error.
    Thanks

    Hi shameej,
    i found a similar thread , can you plz check it?
    http://social.msdn.microsoft.com/Forums/en/sharepointdevelopment/thread/2ee9e393-70f9-4ec7-b19b-f107ef204ef7
    http://www.sharepointdev.net/sharepoint--development-programming/catastrophic-failure-after-itemupdatingeventhandler-66510.shtmlBest Regrads,
    Ahmed Madany

  • I am always getting a General Failure Exception

    Hello,
    I have been working on a UDO form.
    Recently my code is generating "General Failure" Exceptions at parts where the code worked a couple of days ago!
    My add-on was working perfectly before, and I haven't changed anything in it.
    It is setting a general failure exception, when i set the String property of an EditText object, and when i set a form's visible property to true.
    What could be the problem?
    Thanks
    Ralph

    Hi,
    try this in C#
                   /// <summary>
                   /// summary
                   /// <para>Sets the value of a edittext. This is because of the general failure problem, when setting edittext values directly. </para>
                   /// </summary>
                   /// <param name="_editText">The editText to set the value. </param>
                   /// <param name="_value"The value to set.</param>
                   /// <returns>Returns allways true . </returns>
                   public bool setEditTextValue(EditText _editText, string _value)
                        try
                             _editText.Value = _value;
                             return true;
                        catch (Exception)
                             return true;
    Have fun,
    Holger

  • Open Tunnel Failure Exception still if there APN settings in device

    Hi All,
    I have writen blackberry application for BB8100,it give me "Open Tunnel failure exception", Though i have write APN Setiing in Advanced options--->Tcp
    I am from india
    Carrier provides :Airtel
    APN:airtelgprs.com
    Uname:......
    Pass:......
    But still m not resolved this problem if any one have resolution please give me that,its really helpfull to me.
    Thanks in Advance
    Deepak 

    thanks but i haven't been able to find a ksoap specific forum! I have posted the same question on the blackberry forums but there are so many ksoap related issues there that nobody seems able to help.
    I was hoping that this issue was more a general error than a ksoap one!
    Alex

  • Transaction Failure Exception

    Hi All,
    When a transaction (notification creation) is being posted, we are receiving a Transaction Failure. I have still not been able to recreate the scenario, so cannot provide the exact scenario in which it is happening.
    This issue is happening only for some users in our system. Others face no issue while posting the same transaction.
    I am posting the logs below and hoping that somebody will know what it can mean:
    Messages.log:
    I, 200, 20,   3, 05/13/2014 09:07:28,
    0,   377,       
    , ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    Q, 200, 20,   3, 05/13/2014 09:07:28,
    0,   377,
    xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    A, 200, 20,   3, 05/13/2014 09:07:28,
    0,   377,
    xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    S, 200, 20,   3, 05/13/2014 09:07:28,  33,
    3,   377,
    xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    Events.log:
    05/13/2014 09:07:28, 1,    
    0,    
    2, Thr  
    6576, class ServerExternalData, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
    05/13/2014 09:07:28, 1,   
    24,    
    1, Thr  
    6576, Transaction Failure Exception, Fatality = -1, NotificationTitle = "XNullPointerDereference", NotificationText = ""
    05/13/2014 09:07:28, 1,    
    0,    
    2, Thr  
    6576, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
    Java Logs:
    2014/05/13 09:07:28.817: + Thread=6576
    2014/05/13 09:07:28.817:   + Thread Pool=Server
    2014/05/13 09:07:28.817:     + WorkFunction=000000006C58EED0
    2014/05/13 09:07:28.817:       + User=xxxx
    2014/05/13 09:07:28.817:         + Server=Agentry
    2014/05/13 09:07:28.817:           + BackEnd=Java-1
    2014/05/13 09:07:28.817:             + BackEnd=Java-1
    2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::begin
    2014/05/13 09:07:28.817:             + BackEnd=Java-1
    2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::--------------------------------
    Regards
    Ankur Malhotra

    Hi All,
    When a transaction (notification creation) is being posted, we are receiving a Transaction Failure. I have still not been able to recreate the scenario, so cannot provide the exact scenario in which it is happening.
    This issue is happening only for some users in our system. Others face no issue while posting the same transaction.
    I am posting the logs below and hoping that somebody will know what it can mean:
    Messages.log:
    I, 200, 20,   3, 05/13/2014 09:07:28,
    0,   377,       
    , ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    Q, 200, 20,   3, 05/13/2014 09:07:28,
    0,   377,
    xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    A, 200, 20,   3, 05/13/2014 09:07:28,
    0,   377,
    xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    S, 200, 20,   3, 05/13/2014 09:07:28,  33,
    3,   377,
    xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
    Events.log:
    05/13/2014 09:07:28, 1,    
    0,    
    2, Thr  
    6576, class ServerExternalData, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
    05/13/2014 09:07:28, 1,   
    24,    
    1, Thr  
    6576, Transaction Failure Exception, Fatality = -1, NotificationTitle = "XNullPointerDereference", NotificationText = ""
    05/13/2014 09:07:28, 1,    
    0,    
    2, Thr  
    6576, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
    Java Logs:
    2014/05/13 09:07:28.817: + Thread=6576
    2014/05/13 09:07:28.817:   + Thread Pool=Server
    2014/05/13 09:07:28.817:     + WorkFunction=000000006C58EED0
    2014/05/13 09:07:28.817:       + User=xxxx
    2014/05/13 09:07:28.817:         + Server=Agentry
    2014/05/13 09:07:28.817:           + BackEnd=Java-1
    2014/05/13 09:07:28.817:             + BackEnd=Java-1
    2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::begin
    2014/05/13 09:07:28.817:             + BackEnd=Java-1
    2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::--------------------------------
    Regards
    Ankur Malhotra

  • Catastrophic failure ( Exception From HRESULT:0x8000FFFF (E_UnExpected))

    Received this error after installing the desktop client from Azure.
    Created LS app, deployed to Azure, Installed client, received the error.
    I am currently running VS2013 Update 4 and Silverlight 5 (5.1.30514.0). The client download and installs, but on execution, I get the error.
    I read the article below, but to no avail.... Any ideas?
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/bce9d623-2985-42dc-9efc-30897fb0ea9b/catastrophic-failure-exception-from-hresult0x8000ffff-eunexpected?forum=lightswitch

    I managed to resolve this. Being that the application is in beta, there is no SSL attached to it. I tweaked the config to not require encryption and it worked. I'm having another issue now...
    I published an update to the same application. When I run it from my desktop, it shows the application has been updated and to run the application again. Well, everytime I run it, I get the "Updated successfuly" message and advised to run the application
    again. I found a blog post regarding the same issue, but his resolution did not work for me. Here is the link:  http://jandho.blogspot.com/2012/09/out-of-browser-ls-app-keeps-on-showing.html
    Any help would be greatly appreciated

  • Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) in biztalk pipeline

    I am working pipeline component , where I am reading stream and then promoting properties something like this . As I am using streamreader I added using statement. But when i add this I got error  Reason: Catastrophic failure (Exception from HRESULT:
    0x8000FFFF (E_UNEXPECTED)) . I am not understanding  what it mean? If I removed using statement it works fine no issue. Can somebody explain me. 
    Note: I am planning to convert this code with stream pipeline later. But right now have to maintain below existing code, which I am trying to add using statement.
    if (pInMsg.BodyPart != null)
                        if (originalStream != null)
                             using(StreamReader sReader = new StreamReader(originalStream))
                                  StringBuilder sBuilder = null;
                                  while (sReader.Peek() != -1)
                                        sBuilder = new StringBuilder(sReader.Read());
                                        if (sBuilder.ToString().Substring(0, 2) == "test")
                                            string[] TCount = sBuilder.ToString().Split(SepratorChar.ToCharArray());
                                            testCount= Convert.ToInt32(TCount [1]);
                                    string srcFileName = Path.GetFileName(pInMsg.Context.Read("ReceivedFileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties").ToString());
                                    pInMsg.Context.Promote("EDIFileName", "https://Zones._870.EDIProperty", srcFileName);
                                    pInMsg.Context.Promote("GE02", "https://Zones._870.EDIProperty", testCount);
                                    //originalStream.Seek(0, SeekOrigin.Begin);
                                    //pInMsg.BodyPart.Data = originalStream;
                                    //outMsg = pInMsg;
                                    //outMsg.BodyPart.Data = originalStream;
                    //return outMsg;
                    return pInMsg;

    I think this synatx should solve that issue
    if(BTS.LastInterchangeMessage exists MsgTransaction)
    interChangeSequenceNumber = MsgTransaction(BTS.InterchangeSequenceNumber);
    Sure.

  • RFC call ended with "Communication Failure" exception (Function call failed; could not find the function

    Hi All,
    I am getting error while executing oDATA service from SAP Netweaver Gateway
    Error details:
    RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
    I am using SAP NG 740
    Project is created in Gateway system using SEGW having Map to Datasource option used.
    in SPRO manage alias, I had seleted Local App option. Screen attached
    I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
    but still getting same error for all service.
    Kindly advise.
    Regards
    Vivek

    Hello Vivek,
    Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
    Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
    Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
    Check if that RFC is existing in that destination or not.
    For your reference  : Code would be something like this. Put BP here and check the problem.
    * Error and exception handling
    IF lv_subrc <> 0.
    * Execute the RFC exception handling process
       me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
         EXPORTING
           iv_subrc            = lv_subrc
           iv_exp_message_text = lv_exc_msg ).
    ENDIF.
    Go inside this method and check to get info on what has to be done to resolve issue.
    Check carefully what has gone wrong and fix it accordingly.
    No need of adding service & deleting as problem is not because of that.
    Regards,
    Ashwin

  • Provider failure Exception

    Hi there,
    My question is, if i have a QueueReceiver and there is a failure in the JMS Provider, when i invoke the "receive" method, it will
    throw an Exception, am i wrong? After that, i should try to reconnect with
    my JMS Provider.
    Thanks in advance.

    It depends on your provider.
    Some providers such as ActiveMQ can auto-reconnect to the JMS provider (or another broker in the network) automatically for you which is then invisible to your JMS client.
    But if your provider does not support auto-reconnection then yes a receive() or send() method will fail.
    James
    http://logicblaze.com/

  • "Catastrophic failure" exception on export...

    Hi,
    I am working on .Net application that uses CRXIR2 embedded server as a 3rd party reports application.
    I am trying to run a report based on a stored procedure, and got this "catastrophic" exception:
    Catastrophic failure  at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.Export(CrReportExportFormatEnum exportFormat, Int32 Reserved)...
    ErrorCode = -2147418113
    when i run:
    crystalBytes = reportClientDocument.PrintOutputController.Export(ConvertToCrysalExportFormat(format), 0);
    I tried looking up this exception and error code, and all i got was somethong related to SQL server 2000.
    I'm using SQL server 2008...
    Also, when running other reports based on database views, the reports ran successfully..
    Does anyone have an idea?...
    Thank you,
    Dana.

    Hi,
    I think I've found the problem.
    I changed my stored procedure parameters, from int to bigint.
    I ran the report in the designer, using the new stored proc - it worked ok.
    when i run it using RAS, i first set parameter values using :
    reportClientDocument.DataDefController.ParameterFieldController.SetCurrentValue("", parameter.Name, this.logId);
    where logID is of long datatype.
    when i change it to int, i don't get the exception.
    Is it not possible to set a report parameter value to long datatype?

  • Cannot create notes in Apple Mail: Assertion failure, exception thrown

    If I choose File > New Note, nothing happens. The console log displays the attached messages. What could be causing this?
    06/04/2011 14:23:18 Mail[802] * Assertion failure in +[NoteView updateFontAndRule:], /SourceCache/Mail/Mail-1084/MessageViewer.subproj/NoteView.m:210
    font-family cannot be nil
    0 Message 0x00007fff854ed780 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
    1 Message 0x00007fff854ed6e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
    2 Mail 0x000000010009416e 0x0 + 4295573870
    3 Mail 0x0000000100093e16 0x0 + 4295573014
    4 CoreFoundation 0x00007fff8772c96c _invoking__ + 140
    5 CoreFoundation 0x00007fff8772c83d -[NSInvocation invoke] + 141
    6 Mail 0x000000010006665a 0x0 + 4295386714
    7 Foundation 0x00007fff86f198ea nsnotecallback + 167
    8 CoreFoundation 0x00007fff876ff000 __CFXNotificationPost + 1008
    9 CoreFoundation 0x00007fff876eb578 _CFXNotificationPostNotification + 200
    10 Foundation 0x00007fff86f1084e -[NSNotificationCenter postNotificationName:object:userInfo:] + 101
    11 Mail 0x0000000100002a65 0x0 + 4294978149
    12 WebCore 0x00007fff8610c843 _ZN7WebCore15ProgressTracker21finalProgressCompleteEv + 83
    13 WebCore 0x00007fff8610c7d8 ZN7WebCore15ProgressTracker17progressCompletedEPNS5FrameE + 104
    14 WebCore 0x00007fff86093e3a _ZN7WebCore11FrameLoader26recursiveCheckLoadCompleteEv + 298
    15 WebCore 0x00007fff861b4567 ZN7WebCore14DocumentLoader23removeSubresourceLoaderEPNS14ResourceLoaderE + 135
    16 WebCore 0x00007fff861b3a3c _ZN7WebCore17SubresourceLoader16didFinishLoadingEv + 124
    17 Foundation 0x00007fff86f9a608 _NSURLConnectionDidFinishLoading + 113
    18 CFNetwork 0x00007fff807741a0 ZN19URLConnectionClient23_clientDidFinishLoadingEPNS26ClientConnectionEventQueueE + 174
    19 CFNetwork 0x00007fff807d99ae _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 254
    20 CFNetwork 0x00007fff807d9c1a _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 874
    21 CFNetwork 0x00007fff80760825 _ZN19URLConnectionClient13processEventsEv + 121
    22 CFNetwork 0x00007fff80760600 _ZN17MultiplexerSource7performEv + 160
    23 CoreFoundation 0x00007fff876f4401 __CFRunLoopDoSources0 + 1361
    24 CoreFoundation 0x00007fff876f25f9 __CFRunLoopRun + 873
    25 CoreFoundation 0x00007fff876f1dbf CFRunLoopRunSpecific + 575
    26 HIToolbox 0x00007fff802ee7ee RunCurrentEventLoopInMode + 333
    27 HIToolbox 0x00007fff802ee5f3 ReceiveNextEventCommon + 310
    28 HIToolbox 0x00007fff802ee4ac BlockUntilNextEventMatchingListInMode + 59
    29 AppKit 0x00007fff881dbe64 _DPSNextEvent + 718
    30 AppKit 0x00007fff881db7a9 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    31 AppKit 0x00007fff881a148b -[NSApplication run] + 395
    32 AppKit 0x00007fff8819a1a8 NSApplicationMain + 364
    33 Mail 0x00000001000025a4 0x0 + 4294976932
    34 ??? 0x0000000000000002 0x0 + 2
    06/04/2011 14:23:18 Mail[802] An exception was thrown 'Cannot lock focus on image <NSImage 0x1015ef800 Size={0, 0} Reps=(
    )>, because it is size zero.'. Stack trace:
    0 CoreFoundation 0x00007fff877577b4 __exceptionPreprocess + 180
    1 libobjc.A.dylib 0x00007fff839a90f3 objcexceptionthrow + 45
    2 CoreFoundation 0x00007fff877575d7 +[NSException raise:format:arguments:] + 103
    3 CoreFoundation 0x00007fff87757564 +[NSException raise:format:] + 148
    4 AppKit 0x00007fff88317990 -[NSImage _lockFocusOnRepresentation:rect:context:hints:flipped:] + 319
    5 AppKit 0x00007fff88317847 __-[NSImage lockFocusWithRect:context:hints:flipped:]block_invoke1 + 100
    6 AppKit 0x00007fff882abba1 -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 178
    7 AppKit 0x00007fff883177cd -[NSImage lockFocusWithRect:context:hints:flipped:] + 289
    8 AppKit 0x00007fff88317697 -[NSImage lockFocusFlipped:] + 142
    9 Mail 0x000000010009474d 0x0 + 4295575373
    10 Mail 0x0000000100094512 0x0 + 4295574802
    11 Mail 0x0000000100094237 0x0 + 4295574071
    12 Mail 0x0000000100093e16 0x0 + 4295573014
    13 CoreFoundation 0x00007fff8772c96c _invoking__ + 140
    14 CoreFoundation 0x00007fff8772c83d -[NSInvocation invoke] + 141
    15 Mail 0x000000010006665a 0x0 + 4295386714
    16 Foundation 0x00007fff86f198ea nsnotecallback + 167
    17 CoreFoundation 0x00007fff876ff000 __CFXNotificationPost + 1008
    18 CoreFoundation 0x00007fff876eb578 _CFXNotificationPostNotification + 200
    19 Foundation 0x00007fff86f1084e -[NSNotificationCenter postNotificationName:object:userInfo:] + 101
    20 Mail 0x0000000100002a65 0x0 + 4294978149
    21 WebCore 0x00007fff8610c843 _ZN7WebCore15ProgressTracker21finalProgressCompleteEv + 83
    22 WebCore 0x00007fff8610c7d8 ZN7WebCore15ProgressTracker17progressCompletedEPNS5FrameE + 104
    23 WebCore 0x00007fff86093e3a _ZN7WebCore11FrameLoader26recursiveCheckLoadCompleteEv + 298
    24 WebCore 0x00007fff861b4567 ZN7WebCore14DocumentLoader23removeSubresourceLoaderEPNS14ResourceLoaderE + 135
    25 WebCore 0x00007fff861b3a3c _ZN7WebCore17SubresourceLoader16didFinishLoadingEv + 124
    26 Foundation 0x00007fff86f9a608 _NSURLConnectionDidFinishLoading + 113
    27 CFNetwork 0x00007fff807741a0 ZN19URLConnectionClient23_clientDidFinishLoadingEPNS26ClientConnectionEventQueueE + 174
    28 CFNetwork 0x00007fff807d99ae _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 254
    29 CFNetwork 0x00007fff807d9c1a _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 874
    30 CFNetwork 0x00007fff80760825 _ZN19URLConnectionClient13processEventsEv + 121
    31 CFNetwork 0x00007fff80760600 _ZN17MultiplexerSource7performEv + 160
    32 CoreFoundation 0x00007fff876f4401 __CFRunLoopDoSources0 + 1361
    33 CoreFoundation 0x00007fff876f25f9 __CFRunLoopRun + 873
    34 CoreFoundation 0x00007fff876f1dbf CFRunLoopRunSpecific + 575
    35 HIToolbox 0x00007fff802ee7ee RunCurrentEventLoopInMode + 333
    36 HIToolbox 0x00007fff802ee5f3 ReceiveNextEventCommon + 310
    37 HIToolbox 0x00007fff802ee4ac BlockUntilNextEventMatchingListInMode + 59
    38 AppKit 0x00007fff881dbe64 _DPSNextEvent + 718
    39 AppKit 0x00007fff881db7a9 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    40 AppKit 0x00007fff881a148b -[NSApplication run] + 395
    41 AppKit 0x00007fff8819a1a8 NSApplicationMain + 364
    42 Mail 0x00000001000025a4 0x0 + 4294976932
    43 ??? 0x0000000000000002 0x0 + 2
    )

    A final weird follow-up: the “Note font" part of the Fonts & Colours preference panel wasn't visible before. In other words, if the wrong font is selected, you don't have the option to change it or even to know which fund could be corrupted.

  • Communication Failure exception on adapter in Data Services

    Hi,
    I have been trying to get rid of this error but no matter what i do, i cannot resolve this.
    I am using Edge 3.1 Data services on a 2008 Windows server. And i'm trying to login to salesforce ans retrieve data. This has been working for well for the past year. No change whatsoever to either salesforce or on the server. All of a sudden i'm unable to connect according to the error. But when i check in salesforce, it shows a successful connection from the server. That just blew my mind.
    These are the parameters which might help understand my issue.
    service endpoint: https://www.salesforce.com/services/Soap/u/16.0
    - I changed the sercurity token from salesforce.
    - I changed the retry count to 200000 in the DBconfig file
    - Restarted the OS
    - Restarted the adapters.
    My Additional Java Launcher is -Xms64m -Xmx256m
    I dont have a proxy
    I'm at my wits end. And have no more solutions in my bag. I tried everything i could find in this forum. Any help would be greatly helpful.
    Also, the weirdest part is, When i right click on Datastore and "edit", i can enter the password and it saves the data with no error. I get the above error only when i "open"the Datastore.
    Hence, I am unable to execute any batch job. All jobs hang in place for 3 hrs or so and then finally fail. It doesnt even pass the first Dataflow.

    i am able to connect to salesforce from a browser. Even more surprising, when i right click on adapter and click edit , I can save it, meaning it does connect to salesforce and on Salesforce, i see a successsful login history from the server. But, it does not let me browse the metadata and also, when any job starts, it just gets stuck and teha adapter throws the java socket timeout exception.

  • Catch database failure exception

    Hello,
    i would like catch INSERT and UPDATE exception when it do some database error.
    If i use WHEN OTHERS i catch all exceptio ( i think database error too ), but i want to catch only database errors. How i can do?
    thanks!!!

    Does a "numeric or value error" when inserting a too large value into a table column count as a database error?
    As the first person in the history of the world ever to want to do this, it perhaps would help if you explained why?

  • Application initialization failure exception

    I am unable to start the JSL/JREPSVR processes.I am getting the following error when i give tmboot command.Also find the ubbConfig file that I am using.
    E:\bea\tuxedo9.1\samples\jolt\ToUpper>tmloadcf -y ubbToupper
    E:\bea\tuxedo9.1\samples\jolt\ToUpper>tmboot -y
    Booting all admin and server processes in E:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig
    INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level (none)
    INFO: Serial #: 454493271161-2140437240256, Expiration 2007-02-15, Maxusers 100
    INFO: Licensed to: BEA Evaluation Customer
    Booting admin processes ...
    exec BBL -A :
    process id=2100 ... Started.
    Booting server processes ...
    exec DMADM -A :
    process id=1040 ... Started.
    exec JSL -- -n //GVC3ZA65:3052 -m10 -M50 -x10 :
    CMDTUX_CAT:1685: ERROR: Application initialization failure
    exec JREPSVR -A -- -W -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository :
    CMDTUX_CAT:1685: ERROR: Application initialization failure
    exec WSL -A -e E:\bea\logs\stderr -o E:\bea\logs\stdout -- -n //GVC3ZA65:3051 -m 2 -M 10 -x 10 :
    process id=4040 ... Started.
    3 processes started.
    UBBConfig file
    #     (c) 2003 BEA Systems, Inc. All Rights Reserved.
    #ident     "@(#) samples/atmi/simpapp/ubbsimple     $Revision: 1.5 $"
    #Skeleton UBBCONFIG file for the TUXEDO Simple Application.
    #Replace the <bracketed> items with the appropriate values.
    *RESOURCES
    IPCKEY          54321
    #Example:
    #IPCKEY          123456
    DOMAINID     simpapp
    MASTER          GVC3ZA65
    MAXACCESSERS     20
    MAXSERVERS     10
    MAXSERVICES     10
    MODEL          SHM
    LDBAL          N
    *MACHINES
    DEFAULT:
              APPDIR="E:\bea\tuxedo9.1\bin"
              TUXCONFIG="E:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig"
              TUXDIR="E:\bea\tuxedo9.1"
              TLOGSIZE=100
              MAXWSCLIENTS=10
    #Example:
    #          APPDIR="/home/me/simpapp"
    #          TUXCONFIG="/home/me/simpapp/tuxconfig"
    #          TUXDIR="/usr/tuxedo"
    "GVC3ZA65"      LMID=GVC3ZA65
    #Example:
    #beatux          LMID=simple
    *GROUPS
    DEFAULT: LMID=GVC3ZA65 OPENINFO=NONE
    GROUP1
    LMID=GVC3ZA65     GRPNO=1     OPENINFO=NONE
    DMGROUP GRPNO=200
    GWGROUP2 GRPNO=220
    WSL_GRP GRPNO=800
    JSLGRP GRPNO=95
    JREPGRP GRPNO=94
    *SERVERS
    DEFAULT: GRACE=0 MAXGEN=10 RESTART=Y
    DMADM SRVGRP=DMGROUP SRVID=10
    #GWADM SRVGRP=GWGROUP2 SRVID=20
    #GWTDOMAIN SRVGRP=GWGROUP2 SRVID=30 RQADDR="gwtdom2"
    JSL SRVGRP=JSLGRP SRVID=31 CLOPT= " -- -n //GVC3ZA65:3052 -m10 -M50 -x10"
    JREPSVR SRVGRP=JREPGRP SRVID=98 RESTART=Y GRACE=0 CLOPT="-A -- -W -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository"
    #JREPSVR SRVGRP=JREPGRP SRVID=97 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0 CLOPT="-A -- -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository"
    #JREPSVR SRVGRP=JREPGRP SRVID=96 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0 CLOPT="-A -- -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository"
    WSL SRVGRP=WSL_GRP SRVID=10
    CLOPT="-A -e E:\bea\logs\stderr -o E:\bea\logs\stdout -- -n //GVC3ZA65:3051 -m 2 -M 10 -x 10"
    #simpserv     SRVGRP=GROUP1 SRVID=1
    *SERVICES
    TOUPPER

    Ajay,
    Either you have forgotten to execute tmloadcf on your UBBCONFIG file or the
    value of the TUXCONFIG environment variable is set to something different
    than the value specified in the UBBCONFIG file.
    In tmboot, the TUXCONFIG environment variable is set to
    D:\bea\tuxedo9.1\samples\jot\ToUpper\tuxconfig , and tmboot cannot open this
    file.
    Ed
    <Ajay Kumandan> wrote in message news:[email protected]...
    Hi Todd,
    Now Iam able to start the JSL process but JREPSVR process
    is still not starting.I have the following snippet in my
    UBBConfig file.
    JSL SRVGRP=JSLGRP SRVID=31
    CLOPT= "-A -- -n //GVC3ZA03TESTING:3052 -m1 -M1 -x5"
    JREPSVR SRVGRP=JREPGRP SRVID=98 #RESTART=Y GRACE=0
    CLOPT="-A -- -W -P D:\bea\tuxedo\udataobj\jolt\repository\jrepository"
    #JREPSVR SRVGRP=JREPGRP SRVID=97 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0
    CLOPT="-A -- -P D:\bea\tuxedo\udataobj\jolt\repository\jrepository"
    #JREPSVR SRVGRP=JREPGRP SRVID=96 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0
    CLOPT="-A -- -P D:\bea\tuxedo\udataobj\jolt\repository\jrepository"
    Please find the ULOG file for reference
    122101.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: 01-31-2007: Tuxedo Version
    9.1, 32-bit
    122101.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4323: INFO:
    Listener Process Started
    125326.GVC3ZA03TESTING!tlisten.9820.6620.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    125326.GVC3ZA03TESTING!tlisten.9820.6620.-2: CMDTUX_CAT:1468: INFO: Listener
    Process Started
    125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
    file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
    125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: LIBTUX_CAT:588: ERROR: Unable to
    open TUXCONFIG file
    125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: FATAL: internal error:
    CMDTUX_CAT:754: ERROR: error processing configuration file
    125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: FATAL: internal error:
    CMDTUX_CAT:1360: ERROR: configuration file not found
    125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
    file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
    125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: LIBTUX_CAT:588: ERROR: Unable to
    open TUXCONFIG file
    125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: FATAL: internal error:
    CMDTUX_CAT:754: ERROR: error processing configuration file
    125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: FATAL: internal error:
    CMDTUX_CAT:1360: ERROR: configuration file not found
    131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
    file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
    131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: LIBTUX_CAT:588: ERROR: Unable to
    open TUXCONFIG file
    131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: FATAL: internal error:
    CMDTUX_CAT:754: ERROR: error processing configuration file
    131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: FATAL: internal error:
    CMDTUX_CAT:1360: ERROR: configuration file not found
    132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: LIBTUX_CAT:603: ERROR:
    TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not
    exist
    132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: LIBTUX_CAT:588: ERROR: Unable
    to open TUXCONFIG file
    132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: FATAL: internal error:
    CMDTUX_CAT:754: ERROR: error processing configuration file
    132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: FATAL: internal error:
    CMDTUX_CAT:1360: ERROR: configuration file not found
    132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
    file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
    132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: LIBTUX_CAT:588: ERROR: Unable to
    open TUXCONFIG file
    132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: FATAL: internal error:
    CMDTUX_CAT:754: ERROR: error processing configuration file
    132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: FATAL: internal error:
    CMDTUX_CAT:1360: ERROR: configuration file not found
    132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
    file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
    132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: LIBTUX_CAT:588: ERROR: Unable to
    open TUXCONFIG file
    132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: FATAL: internal error:
    CMDTUX_CAT:754: ERROR: error processing configuration file
    132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: FATAL: internal error:
    CMDTUX_CAT:1360: ERROR: configuration file not found
    152528.GVC3ZA03TESTING!tlisten.9820.6620.-2: CMDTUX_CAT:4209: INFO: Accepted
    request from //127.0.0.1:4553, seq # 1
    152655.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4209: INFO:
    Accepted request from //10.226.65.102:4554, seq # 1
    153804.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4209: INFO:
    Accepted request from //10.226.65.102:4580, seq # 2
    164453.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4209: INFO:
    Accepted request from //10.226.65.102:4959, seq # 3
    164758.GVC3ZA03TESTING!jsh.4900.7868.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    164758.GVC3ZA03TESTING!jsh.4900.7868.-2: JOLT_CAT:1034: "ERROR: Failed to
    attach to shared memory for listener table, errno = 22"
    164831.GVC3ZA03TESTING!JSH.exe.5084.2480.-2: 01-31-2007: Tuxedo Version 9.1,
    32-bit
    164831.GVC3ZA03TESTING!JSH.exe.5084.2480.-2: JOLT_CAT:1034: "ERROR: Failed
    to attach to shared memory for listener table, errno = 22"
    Thanks and Regards,
    Ajay

Maybe you are looking for

  • Advice On Drobo or DroboPro? LR24 Mac Asset Management

    Anyone have problems with Drobo or DroboPro? I have 2+TB of images, that is growing and will continue to do so. Thinking of a solution where I use my internal HD (2.7TB Raid 5) for active clients / jobs and then using a Drobo or DroboPro for less act

  • Please Reply. WRT54G2 Q's.

    Hi everyone i have a ps3 and everytime i ply ps3 my connection frm 95% it drops to 75% in 5sec and i phoned linksys and i asked why does it do tht and there like open ports on ur ps3 and then we can fix ur connection.  What do they mean by ask for op

  • Ipod photo doesnt work with any of my devices

    ipod photo 20gb, it works fine and is upadated in itunes, but i have 4 devices i would like to use it with and it works with none of them, my gf's ipod touch works fine with them all, is there an adapter or updated firmware to get this ipod photo to

  • Plz validate.....this concept

    Dear Experts... As I understand  the concept of Header assigned networksu2026u2026. Here is only one network header will be assigned at level one wbs All the activities under one network header. The costs will   passed directly to the network header.

  • Compaq amd kernel panic

    I am trying to install archlinux on my new compaq cq50-106au laptop but it fails to install, the installer stops with a hardware error. The same problem happens with other linux distros also. But windows xp installs and works perfectly on my system.